1 /* 2 * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 enum axp209_reg { 8 AXP209_POWER_STATUS = 0x00, 9 AXP209_CHIP_VERSION = 0x03, 10 AXP209_DCDC2_VOLTAGE = 0x23, 11 AXP209_DCDC3_VOLTAGE = 0x27, 12 AXP209_LDO24_VOLTAGE = 0x28, 13 AXP209_LDO3_VOLTAGE = 0x29, 14 AXP209_IRQ_ENABLE1 = 0x40, 15 AXP209_IRQ_ENABLE2 = 0x41, 16 AXP209_IRQ_ENABLE3 = 0x42, 17 AXP209_IRQ_ENABLE4 = 0x43, 18 AXP209_IRQ_ENABLE5 = 0x44, 19 AXP209_IRQ_STATUS5 = 0x4c, 20 AXP209_SHUTDOWN = 0x32, 21 }; 22 23 #define AXP209_POWER_STATUS_ON_BY_DC (1 << 0) 24 #define AXP209_POWER_STATUS_VBUS_USABLE (1 << 4) 25 26 #define AXP209_IRQ5_PEK_UP (1 << 6) 27 #define AXP209_IRQ5_PEK_DOWN (1 << 5) 28 29 #define AXP209_POWEROFF (1 << 7) 30 31 /* For axp_gpio.c */ 32 #define AXP_POWER_STATUS 0x00 33 #define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) 34 #define AXP_GPIO0_CTRL 0x90 35 #define AXP_GPIO1_CTRL 0x92 36 #define AXP_GPIO2_CTRL 0x93 37 #define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ 38 #define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ 39 #define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ 40 #define AXP_GPIO_STATE 0x94 41 #define AXP_GPIO_STATE_OFFSET 4 42 43 extern int axp209_set_dcdc2(int mvolt); 44 extern int axp209_set_dcdc3(int mvolt); 45 extern int axp209_set_ldo2(int mvolt); 46 extern int axp209_set_ldo3(int mvolt); 47 extern int axp209_set_ldo4(int mvolt); 48 extern int axp209_init(void); 49 extern int axp209_poweron_by_dc(void); 50 extern int axp209_power_button(void); 51