1 /* 2 * (C) Copyright 2000-2010 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> 6 * Andreas Heppel <aheppel@sysgo.de> 7 * 8 * (C) Copyright 2008 Atmel Corporation 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 #include <common.h> 13 #include <dm.h> 14 #include <environment.h> 15 #include <malloc.h> 16 #include <spi.h> 17 #include <spi_flash.h> 18 #include <search.h> 19 #include <errno.h> 20 #include <dm/device-internal.h> 21 22 #ifndef CONFIG_ENV_SPI_BUS 23 # define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 24 #endif 25 #ifndef CONFIG_ENV_SPI_CS 26 # define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 27 #endif 28 #ifndef CONFIG_ENV_SPI_MAX_HZ 29 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 30 #endif 31 #ifndef CONFIG_ENV_SPI_MODE 32 # define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 33 #endif 34 35 #ifndef CONFIG_SPL_BUILD 36 #define CMD_SAVEENV 37 #endif 38 39 #ifdef CONFIG_ENV_OFFSET_REDUND 40 #ifdef CMD_SAVEENV 41 static ulong env_offset = CONFIG_ENV_OFFSET; 42 static ulong env_new_offset = CONFIG_ENV_OFFSET_REDUND; 43 #endif 44 45 #define ACTIVE_FLAG 1 46 #define OBSOLETE_FLAG 0 47 #endif /* CONFIG_ENV_OFFSET_REDUND */ 48 49 DECLARE_GLOBAL_DATA_PTR; 50 51 static struct spi_flash *env_flash; 52 53 static int setup_flash_device(void) 54 { 55 #ifdef CONFIG_DM_SPI_FLASH 56 struct udevice *new; 57 int ret; 58 59 /* speed and mode will be read from DT */ 60 ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, 61 0, 0, &new); 62 if (ret) { 63 set_default_env("!spi_flash_probe_bus_cs() failed"); 64 return ret; 65 } 66 67 env_flash = dev_get_uclass_priv(new); 68 #else 69 70 if (!env_flash) { 71 env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, 72 CONFIG_ENV_SPI_CS, 73 CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); 74 if (!env_flash) { 75 set_default_env("!spi_flash_probe() failed"); 76 return -EIO; 77 } 78 } 79 #endif 80 return 0; 81 } 82 83 #if defined(CONFIG_ENV_OFFSET_REDUND) 84 #ifdef CMD_SAVEENV 85 static int env_sf_save(void) 86 { 87 env_t env_new; 88 char *saved_buffer = NULL, flag = OBSOLETE_FLAG; 89 u32 saved_size, saved_offset, sector; 90 int ret; 91 92 ret = setup_flash_device(); 93 if (ret) 94 return ret; 95 96 ret = env_export(&env_new); 97 if (ret) 98 return -EIO; 99 env_new.flags = ACTIVE_FLAG; 100 101 if (gd->env_valid == ENV_VALID) { 102 env_new_offset = CONFIG_ENV_OFFSET_REDUND; 103 env_offset = CONFIG_ENV_OFFSET; 104 } else { 105 env_new_offset = CONFIG_ENV_OFFSET; 106 env_offset = CONFIG_ENV_OFFSET_REDUND; 107 } 108 109 /* Is the sector larger than the env (i.e. embedded) */ 110 if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { 111 saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE; 112 saved_offset = env_new_offset + CONFIG_ENV_SIZE; 113 saved_buffer = memalign(ARCH_DMA_MINALIGN, saved_size); 114 if (!saved_buffer) { 115 ret = -ENOMEM; 116 goto done; 117 } 118 ret = spi_flash_read(env_flash, saved_offset, 119 saved_size, saved_buffer); 120 if (ret) 121 goto done; 122 } 123 124 sector = DIV_ROUND_UP(CONFIG_ENV_SIZE, CONFIG_ENV_SECT_SIZE); 125 126 puts("Erasing SPI flash..."); 127 ret = spi_flash_erase(env_flash, env_new_offset, 128 sector * CONFIG_ENV_SECT_SIZE); 129 if (ret) 130 goto done; 131 132 puts("Writing to SPI flash..."); 133 134 ret = spi_flash_write(env_flash, env_new_offset, 135 CONFIG_ENV_SIZE, &env_new); 136 if (ret) 137 goto done; 138 139 if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { 140 ret = spi_flash_write(env_flash, saved_offset, 141 saved_size, saved_buffer); 142 if (ret) 143 goto done; 144 } 145 146 ret = spi_flash_write(env_flash, env_offset + offsetof(env_t, flags), 147 sizeof(env_new.flags), &flag); 148 if (ret) 149 goto done; 150 151 puts("done\n"); 152 153 gd->env_valid = gd->env_valid == ENV_REDUND ? ENV_VALID : ENV_REDUND; 154 155 printf("Valid environment: %d\n", (int)gd->env_valid); 156 157 done: 158 if (saved_buffer) 159 free(saved_buffer); 160 161 return ret; 162 } 163 #endif /* CMD_SAVEENV */ 164 165 static int env_sf_load(void) 166 { 167 int ret; 168 int crc1_ok = 0, crc2_ok = 0; 169 env_t *tmp_env1 = NULL; 170 env_t *tmp_env2 = NULL; 171 env_t *ep = NULL; 172 173 tmp_env1 = (env_t *)memalign(ARCH_DMA_MINALIGN, 174 CONFIG_ENV_SIZE); 175 tmp_env2 = (env_t *)memalign(ARCH_DMA_MINALIGN, 176 CONFIG_ENV_SIZE); 177 if (!tmp_env1 || !tmp_env2) { 178 set_default_env("!malloc() failed"); 179 ret = -EIO; 180 goto out; 181 } 182 183 ret = setup_flash_device(); 184 if (ret) 185 goto out; 186 187 ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET, 188 CONFIG_ENV_SIZE, tmp_env1); 189 if (ret) { 190 set_default_env("!spi_flash_read() failed"); 191 goto err_read; 192 } 193 194 if (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc) 195 crc1_ok = 1; 196 197 ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET_REDUND, 198 CONFIG_ENV_SIZE, tmp_env2); 199 if (!ret) { 200 if (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc) 201 crc2_ok = 1; 202 } 203 204 if (!crc1_ok && !crc2_ok) { 205 set_default_env("!bad CRC"); 206 ret = -EIO; 207 goto err_read; 208 } else if (crc1_ok && !crc2_ok) { 209 gd->env_valid = ENV_VALID; 210 } else if (!crc1_ok && crc2_ok) { 211 gd->env_valid = ENV_REDUND; 212 } else if (tmp_env1->flags == ACTIVE_FLAG && 213 tmp_env2->flags == OBSOLETE_FLAG) { 214 gd->env_valid = ENV_VALID; 215 } else if (tmp_env1->flags == OBSOLETE_FLAG && 216 tmp_env2->flags == ACTIVE_FLAG) { 217 gd->env_valid = ENV_REDUND; 218 } else if (tmp_env1->flags == tmp_env2->flags) { 219 gd->env_valid = ENV_VALID; 220 } else if (tmp_env1->flags == 0xFF) { 221 gd->env_valid = ENV_VALID; 222 } else if (tmp_env2->flags == 0xFF) { 223 gd->env_valid = ENV_REDUND; 224 } else { 225 /* 226 * this differs from code in env_flash.c, but I think a sane 227 * default path is desirable. 228 */ 229 gd->env_valid = ENV_VALID; 230 } 231 232 if (gd->env_valid == ENV_VALID) 233 ep = tmp_env1; 234 else 235 ep = tmp_env2; 236 237 ret = env_import((char *)ep, 0); 238 if (!ret) { 239 error("Cannot import environment: errno = %d\n", errno); 240 set_default_env("!env_import failed"); 241 } 242 243 err_read: 244 spi_flash_free(env_flash); 245 env_flash = NULL; 246 out: 247 free(tmp_env1); 248 free(tmp_env2); 249 250 return ret; 251 } 252 #else 253 #ifdef CMD_SAVEENV 254 static int env_sf_save(void) 255 { 256 u32 saved_size, saved_offset, sector; 257 char *saved_buffer = NULL; 258 int ret = 1; 259 env_t env_new; 260 261 ret = setup_flash_device(); 262 if (ret) 263 return ret; 264 265 /* Is the sector larger than the env (i.e. embedded) */ 266 if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { 267 saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE; 268 saved_offset = CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE; 269 saved_buffer = malloc(saved_size); 270 if (!saved_buffer) 271 goto done; 272 273 ret = spi_flash_read(env_flash, saved_offset, 274 saved_size, saved_buffer); 275 if (ret) 276 goto done; 277 } 278 279 ret = env_export(&env_new); 280 if (ret) 281 goto done; 282 283 sector = DIV_ROUND_UP(CONFIG_ENV_SIZE, CONFIG_ENV_SECT_SIZE); 284 285 puts("Erasing SPI flash..."); 286 ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET, 287 sector * CONFIG_ENV_SECT_SIZE); 288 if (ret) 289 goto done; 290 291 puts("Writing to SPI flash..."); 292 ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET, 293 CONFIG_ENV_SIZE, &env_new); 294 if (ret) 295 goto done; 296 297 if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { 298 ret = spi_flash_write(env_flash, saved_offset, 299 saved_size, saved_buffer); 300 if (ret) 301 goto done; 302 } 303 304 ret = 0; 305 puts("done\n"); 306 307 done: 308 if (saved_buffer) 309 free(saved_buffer); 310 311 return ret; 312 } 313 #endif /* CMD_SAVEENV */ 314 315 static int env_sf_load(void) 316 { 317 int ret; 318 char *buf = NULL; 319 320 buf = (char *)memalign(ARCH_DMA_MINALIGN, CONFIG_ENV_SIZE); 321 if (!buf) { 322 set_default_env("!malloc() failed"); 323 return -EIO; 324 } 325 326 ret = setup_flash_device(); 327 if (ret) 328 goto out; 329 330 ret = spi_flash_read(env_flash, 331 CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, buf); 332 if (ret) { 333 set_default_env("!spi_flash_read() failed"); 334 goto err_read; 335 } 336 337 ret = env_import(buf, 1); 338 if (ret) 339 gd->env_valid = ENV_VALID; 340 341 err_read: 342 spi_flash_free(env_flash); 343 env_flash = NULL; 344 out: 345 free(buf); 346 347 return ret; 348 } 349 #endif 350 351 U_BOOT_ENV_LOCATION(sf) = { 352 .location = ENVL_SPI_FLASH, 353 ENV_NAME("SPI Flash") 354 .load = env_sf_load, 355 #ifdef CMD_SAVEENV 356 .save = env_save_ptr(env_sf_save), 357 #endif 358 }; 359