1menu "Environment" 2 3config ENV_IS_NOWHERE 4 bool "Environment is not stored" 5 depends on !ENV_IS_IN_EEPROM 6 depends on !ENV_IS_IN_EXT4 7 depends on !ENV_IS_IN_FAT 8 depends on !ENV_IS_IN_FLASH 9 depends on !ENV_IS_IN_MMC 10 depends on !ENV_IS_IN_NAND 11 depends on !ENV_IS_IN_NVRAM 12 depends on !ENV_IS_IN_ONENAND 13 depends on !ENV_IS_IN_REMOTE 14 depends on !ENV_IS_IN_SPI_FLASH 15 depends on !ENV_IS_IN_UBI 16 default y 17 help 18 Define this if you don't want to or can't have an environment stored 19 on a storage medium. In this case the environment will still exist 20 while U-Boot is running, but once U-Boot exits it will not be 21 stored. U-Boot will therefore always start up with a default 22 environment. 23 24config ENV_IS_IN_EEPROM 25 bool "Environment in EEPROM" 26 depends on !CHAIN_OF_TRUST 27 help 28 Use this if you have an EEPROM or similar serial access 29 device and a driver for it. 30 31 - CONFIG_ENV_OFFSET: 32 - CONFIG_ENV_SIZE: 33 34 These two #defines specify the offset and size of the 35 environment area within the total memory of your EEPROM. 36 37 Note that we consider the length of the address field to 38 still be one byte because the extra address bits are hidden 39 in the chip address. 40 41 - CONFIG_ENV_EEPROM_IS_ON_I2C 42 define this, if you have I2C and SPI activated, and your 43 EEPROM, which holds the environment, is on the I2C bus. 44 45 - CONFIG_I2C_ENV_EEPROM_BUS 46 if you have an Environment on an EEPROM reached over 47 I2C muxes, you can define here, how to reach this 48 EEPROM. For example: 49 50 #define CONFIG_I2C_ENV_EEPROM_BUS 1 51 52 EEPROM which holds the environment, is reached over 53 a pca9547 i2c mux with address 0x70, channel 3. 54 55config ENV_IS_IN_FAT 56 bool "Environment is in a FAT filesystem" 57 depends on !CHAIN_OF_TRUST 58 default y if ARCH_BCM283X 59 default y if ARCH_SUNXI && MMC 60 default y if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS 61 select FS_FAT 62 select FAT_WRITE 63 help 64 Define this if you want to use the FAT file system for the environment. 65 66config ENV_IS_IN_EXT4 67 bool "Environment is in a EXT4 filesystem" 68 depends on !CHAIN_OF_TRUST 69 select EXT4_WRITE 70 help 71 Define this if you want to use the EXT4 file system for the environment. 72 73config ENV_IS_IN_FLASH 74 bool "Environment in flash memory" 75 depends on !CHAIN_OF_TRUST 76 default y if ARCH_CINTEGRATOR 77 default y if ARCH_INTEGRATOR_CP 78 default y if M548x || M547x || M5282 || MCF547x_8x 79 default y if MCF532x || MCF52x2 80 default y if MPC86xx || MPC83xx 81 default y if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641 82 default y if SH && !CPU_SH4 83 help 84 Define this if you have a flash device which you want to use for the 85 environment. 86 87 a) The environment occupies one whole flash sector, which is 88 "embedded" in the text segment with the U-Boot code. This 89 happens usually with "bottom boot sector" or "top boot 90 sector" type flash chips, which have several smaller 91 sectors at the start or the end. For instance, such a 92 layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In 93 such a case you would place the environment in one of the 94 4 kB sectors - with U-Boot code before and after it. With 95 "top boot sector" type flash chips, you would put the 96 environment in one of the last sectors, leaving a gap 97 between U-Boot and the environment. 98 99 CONFIG_ENV_OFFSET: 100 101 Offset of environment data (variable area) to the 102 beginning of flash memory; for instance, with bottom boot 103 type flash chips the second sector can be used: the offset 104 for this sector is given here. 105 106 CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. 107 108 CONFIG_ENV_ADDR: 109 110 This is just another way to specify the start address of 111 the flash sector containing the environment (instead of 112 CONFIG_ENV_OFFSET). 113 114 CONFIG_ENV_SECT_SIZE: 115 116 Size of the sector containing the environment. 117 118 119 b) Sometimes flash chips have few, equal sized, BIG sectors. 120 In such a case you don't want to spend a whole sector for 121 the environment. 122 123 CONFIG_ENV_SIZE: 124 125 If you use this in combination with CONFIG_ENV_IS_IN_FLASH 126 and CONFIG_ENV_SECT_SIZE, you can specify to use only a part 127 of this flash sector for the environment. This saves 128 memory for the RAM copy of the environment. 129 130 It may also save flash memory if you decide to use this 131 when your environment is "embedded" within U-Boot code, 132 since then the remainder of the flash sector could be used 133 for U-Boot code. It should be pointed out that this is 134 STRONGLY DISCOURAGED from a robustness point of view: 135 updating the environment in flash makes it always 136 necessary to erase the WHOLE sector. If something goes 137 wrong before the contents has been restored from a copy in 138 RAM, your target system will be dead. 139 140 CONFIG_ENV_ADDR_REDUND 141 CONFIG_ENV_SIZE_REDUND 142 143 These settings describe a second storage area used to hold 144 a redundant copy of the environment data, so that there is 145 a valid backup copy in case there is a power failure during 146 a "saveenv" operation. 147 148 BE CAREFUL! Any changes to the flash layout, and some changes to the 149 source code will make it necessary to adapt <board>/u-boot.lds* 150 accordingly! 151 152config ENV_IS_IN_MMC 153 bool "Environment in an MMC device" 154 depends on !CHAIN_OF_TRUST 155 depends on MMC 156 default y if ARCH_EXYNOS4 157 default y if MX6SX || MX7D 158 default y if TEGRA30 || TEGRA124 159 default y if TEGRA_ARMV8_COMMON 160 help 161 Define this if you have an MMC device which you want to use for the 162 environment. 163 164 CONFIG_SYS_MMC_ENV_DEV: 165 166 Specifies which MMC device the environment is stored in. 167 168 CONFIG_SYS_MMC_ENV_PART (optional): 169 170 Specifies which MMC partition the environment is stored in. If not 171 set, defaults to partition 0, the user area. Common values might be 172 1 (first MMC boot partition), 2 (second MMC boot partition). 173 174 CONFIG_ENV_OFFSET: 175 CONFIG_ENV_SIZE: 176 177 These two #defines specify the offset and size of the environment 178 area within the specified MMC device. 179 180 If offset is positive (the usual case), it is treated as relative to 181 the start of the MMC partition. If offset is negative, it is treated 182 as relative to the end of the MMC partition. This can be useful if 183 your board may be fitted with different MMC devices, which have 184 different sizes for the MMC partitions, and you always want the 185 environment placed at the very end of the partition, to leave the 186 maximum possible space before it, to store other data. 187 188 These two values are in units of bytes, but must be aligned to an 189 MMC sector boundary. 190 191 CONFIG_ENV_OFFSET_REDUND (optional): 192 193 Specifies a second storage area, of CONFIG_ENV_SIZE size, used to 194 hold a redundant copy of the environment data. This provides a 195 valid backup copy in case the other copy is corrupted, e.g. due 196 to a power failure during a "saveenv" operation. 197 198 This value may also be positive or negative; this is handled in the 199 same way as CONFIG_ENV_OFFSET. 200 201 This value is also in units of bytes, but must also be aligned to 202 an MMC sector boundary. 203 204 CONFIG_ENV_SIZE_REDUND (optional): 205 206 This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is 207 set. If this value is set, it must be set to the same value as 208 CONFIG_ENV_SIZE. 209 210config ENV_IS_IN_NAND 211 bool "Environment in a NAND device" 212 depends on !CHAIN_OF_TRUST 213 help 214 Define this if you have a NAND device which you want to use for the 215 environment. 216 217 - CONFIG_ENV_OFFSET: 218 - CONFIG_ENV_SIZE: 219 220 These two #defines specify the offset and size of the environment 221 area within the first NAND device. CONFIG_ENV_OFFSET must be 222 aligned to an erase block boundary. 223 224 - CONFIG_ENV_OFFSET_REDUND (optional): 225 226 This setting describes a second storage area of CONFIG_ENV_SIZE 227 size used to hold a redundant copy of the environment data, so 228 that there is a valid backup copy in case there is a power failure 229 during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be 230 aligned to an erase block boundary. 231 232 - CONFIG_ENV_RANGE (optional): 233 234 Specifies the length of the region in which the environment 235 can be written. This should be a multiple of the NAND device's 236 block size. Specifying a range with more erase blocks than 237 are needed to hold CONFIG_ENV_SIZE allows bad blocks within 238 the range to be avoided. 239 240 - CONFIG_ENV_OFFSET_OOB (optional): 241 242 Enables support for dynamically retrieving the offset of the 243 environment from block zero's out-of-band data. The 244 "nand env.oob" command can be used to record this offset. 245 Currently, CONFIG_ENV_OFFSET_REDUND is not supported when 246 using CONFIG_ENV_OFFSET_OOB. 247 248config ENV_IS_IN_NVRAM 249 bool "Environment in a non-volatile RAM" 250 depends on !CHAIN_OF_TRUST 251 help 252 Define this if you have some non-volatile memory device 253 (NVRAM, battery buffered SRAM) which you want to use for the 254 environment. 255 256 - CONFIG_ENV_ADDR: 257 - CONFIG_ENV_SIZE: 258 259 These two #defines are used to determine the memory area you 260 want to use for environment. It is assumed that this memory 261 can just be read and written to, without any special 262 provision. 263 264config ENV_IS_IN_ONENAND 265 bool "Environment is in OneNAND" 266 depends on !CHAIN_OF_TRUST 267 help 268 Define this if you want to put your local device's environment in 269 OneNAND. 270 271 - CONFIG_ENV_ADDR: 272 - CONFIG_ENV_SIZE: 273 274 These two #defines are used to determine the device range you 275 want to use for environment. It is assumed that this memory 276 can just be read and written to, without any special 277 provision. 278 279config ENV_IS_IN_REMOTE 280 bool "Environment is in remote memory space" 281 depends on !CHAIN_OF_TRUST 282 help 283 Define this if you have a remote memory space which you 284 want to use for the local device's environment. 285 286 - CONFIG_ENV_ADDR: 287 - CONFIG_ENV_SIZE: 288 289 These two #defines specify the address and size of the 290 environment area within the remote memory space. The 291 local device can get the environment from remote memory 292 space by SRIO or PCIE links. 293 294config ENV_IS_IN_SPI_FLASH 295 bool "Environment is in SPI flash" 296 depends on !CHAIN_OF_TRUST 297 default y if ARMADA_XP 298 default y if INTEL_BAYTRAIL 299 default y if INTEL_BRASWELL 300 default y if INTEL_BROADWELL 301 default y if NORTHBRIDGE_INTEL_IVYBRIDGE 302 default y if INTEL_QUARK 303 default y if INTEL_QUEENSBAY 304 help 305 Define this if you have a SPI Flash memory device which you 306 want to use for the environment. 307 308 - CONFIG_ENV_OFFSET: 309 - CONFIG_ENV_SIZE: 310 311 These two #defines specify the offset and size of the 312 environment area within the SPI Flash. CONFIG_ENV_OFFSET must be 313 aligned to an erase sector boundary. 314 315 - CONFIG_ENV_SECT_SIZE: 316 317 Define the SPI flash's sector size. 318 319 - CONFIG_ENV_OFFSET_REDUND (optional): 320 321 This setting describes a second storage area of CONFIG_ENV_SIZE 322 size used to hold a redundant copy of the environment data, so 323 that there is a valid backup copy in case there is a power failure 324 during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be 325 aligned to an erase sector boundary. 326 327 - CONFIG_ENV_SPI_BUS (optional): 328 - CONFIG_ENV_SPI_CS (optional): 329 330 Define the SPI bus and chip select. If not defined they will be 0. 331 332 - CONFIG_ENV_SPI_MAX_HZ (optional): 333 334 Define the SPI max work clock. If not defined then use 1MHz. 335 336 - CONFIG_ENV_SPI_MODE (optional): 337 338 Define the SPI work mode. If not defined then use SPI_MODE_3. 339 340config ENV_IS_IN_UBI 341 bool "Environment in a UBI volume" 342 depends on !CHAIN_OF_TRUST 343 help 344 Define this if you have an UBI volume that you want to use for the 345 environment. This has the benefit of wear-leveling the environment 346 accesses, which is important on NAND. 347 348 - CONFIG_ENV_UBI_PART: 349 350 Define this to a string that is the mtd partition containing the UBI. 351 352 - CONFIG_ENV_UBI_VOLUME: 353 354 Define this to the name of the volume that you want to store the 355 environment in. 356 357 - CONFIG_ENV_UBI_VOLUME_REDUND: 358 359 Define this to the name of another volume to store a second copy of 360 the environment in. This will enable redundant environments in UBI. 361 It is assumed that both volumes are in the same MTD partition. 362 363config ENV_FAT_INTERFACE 364 string "Name of the block device for the environment" 365 depends on ENV_IS_IN_FAT 366 default "mmc" if ARCH_SUNXI 367 default "mmc" if TI_COMMON_CMD_OPTIONS || ARCH_ZYNQMP || ARCH_AT91 368 help 369 Define this to a string that is the name of the block device. 370 371config ENV_FAT_DEVICE_AND_PART 372 string "Device and partition for where to store the environemt in FAT" 373 depends on ENV_IS_IN_FAT 374 default "0:1" if TI_COMMON_CMD_OPTIONS 375 default "0:auto" if ARCH_ZYNQMP 376 default "0:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1 377 default "1:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1 378 default "0" if ARCH_AT91 379 help 380 Define this to a string to specify the partition of the device. It can 381 be as following: 382 383 "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1) 384 - "D:P": device D partition P. Error occurs if device D has no 385 partition table. 386 - "D:0": device D. 387 - "D" or "D:": device D partition 1 if device D has partition 388 table, or the whole device D if has no partition 389 table. 390 - "D:auto": first partition in device D with bootable flag set. 391 If none, first valid partition in device D. If no 392 partition table then means device D. 393 394config ENV_FAT_FILE 395 string "Name of the FAT file to use for the environment" 396 depends on ENV_IS_IN_FAT 397 default "uboot.env" 398 help 399 It's a string of the FAT file name. This file use to store the 400 environment. 401 402config ENV_EXT4_INTERFACE 403 string "Name of the block device for the environment" 404 depends on ENV_IS_IN_EXT4 405 help 406 Define this to a string that is the name of the block device. 407 408config ENV_EXT4_DEVICE_AND_PART 409 string "Device and partition for where to store the environemt in EXT4" 410 depends on ENV_IS_IN_EXT4 411 help 412 Define this to a string to specify the partition of the device. It can 413 be as following: 414 415 "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1) 416 - "D:P": device D partition P. Error occurs if device D has no 417 partition table. 418 - "D:0": device D. 419 - "D" or "D:": device D partition 1 if device D has partition 420 table, or the whole device D if has no partition 421 table. 422 - "D:auto": first partition in device D with bootable flag set. 423 If none, first valid partition in device D. If no 424 partition table then means device D. 425 426config ENV_EXT4_FILE 427 string "Name of the EXT4 file to use for the environment" 428 depends on ENV_IS_IN_EXT4 429 default "uboot.env" 430 help 431 It's a string of the EXT4 file name. This file use to store the 432 environment (explicit path to the file) 433 434if ARCH_ROCKCHIP || ARCH_SUNXI || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL 435 436config ENV_OFFSET 437 hex "Environment Offset" 438 depends on !ENV_IS_IN_UBI 439 depends on !ENV_IS_NOWHERE 440 default 0x3f8000 if ARCH_ROCKCHIP 441 default 0x88000 if ARCH_SUNXI 442 default 0xE0000 if ARCH_ZYNQ 443 default 0x1E00000 if ARCH_ZYNQMP 444 help 445 Offset from the start of the device (or partition) 446 447config ENV_SIZE 448 hex "Environment Size" 449 default 0x40000 if ENV_IS_IN_SPI_FLASH && ARCH_ZYNQMP 450 default 0x20000 if ARCH_SUNXI || ARCH_ZYNQ 451 default 0x8000 if ARCH_ROCKCHIP || ARCH_ZYNQMP || ARCH_VERSAL 452 help 453 Size of the environment storage area 454 455config ENV_SECT_SIZE 456 hex "Environment Sector-Size" 457 depends on !ENV_IS_NOWHERE && (ARCH_ZYNQ || ARCH_ZYNQMP) 458 default 0x40000 if ARCH_ZYNQMP 459 default 0x20000 if ARCH_ZYNQ 460 help 461 Size of the sector containing the environment. 462 463config ENV_UBI_PART 464 string "UBI partition name" 465 depends on ENV_IS_IN_UBI 466 help 467 MTD partition containing the UBI device 468 469config ENV_UBI_VOLUME 470 string "UBI volume name" 471 depends on ENV_IS_IN_UBI 472 help 473 Name of the volume that you want to store the environment in. 474 475endif 476 477config USE_DEFAULT_ENV_FILE 478 bool "Create default environment from file" 479 help 480 Normally, the default environment is automatically generated 481 based on the settings of various CONFIG_* options, as well 482 as the CONFIG_EXTRA_ENV_SETTINGS. By selecting this option, 483 you can instead define the entire default environment in an 484 external file. 485 486config DEFAULT_ENV_FILE 487 string "Path to default environment file" 488 depends on USE_DEFAULT_ENV_FILE 489 help 490 The path containing the default environment. The format is 491 the same as accepted by the mkenvimage tool: lines 492 containing key=value pairs, blank lines and lines beginning 493 with # are ignored. 494 495config ENV_VARS_UBOOT_RUNTIME_CONFIG 496 bool "Add run-time information to the environment" 497 help 498 Enable this in order to add variables describing certain 499 run-time determined information about the hardware to the 500 environment. These will be named board_name, board_rev. 501 502if SPL_ENV_SUPPORT 503config SPL_ENV_IS_NOWHERE 504 bool "SPL Environment is not stored" 505 default y if ENV_IS_NOWHERE 506 help 507 Similar to ENV_IS_NOWHERE, used for SPL environment. 508 509config SPL_ENV_IS_IN_MMC 510 bool "SPL Environment in an MMC device" 511 depends on !SPL_ENV_IS_NOWHERE 512 depends on ENV_IS_IN_MMC 513 default y 514 help 515 Similar to ENV_IS_IN_MMC, used for SPL environment. 516 517config SPL_ENV_IS_IN_FAT 518 bool "SPL Environment is in a FAT filesystem" 519 depends on !SPL_ENV_IS_NOWHERE 520 depends on ENV_IS_IN_FAT 521 default y 522 help 523 Similar to ENV_IS_IN_FAT, used for SPL environment. 524 525config SPL_ENV_IS_IN_EXT4 526 bool "SPL Environment is in a EXT4 filesystem" 527 depends on !SPL_ENV_IS_NOWHERE 528 depends on ENV_IS_IN_EXT4 529 default y 530 help 531 Similar to ENV_IS_IN_EXT4, used for SPL environment. 532 533config SPL_ENV_IS_IN_NAND 534 bool "SPL Environment in a NAND device" 535 depends on !SPL_ENV_IS_NOWHERE 536 depends on ENV_IS_IN_NAND 537 default y 538 help 539 Similar to ENV_IS_IN_NAND, used for SPL environment. 540 541config SPL_ENV_IS_IN_SPI_FLASH 542 bool "SPL Environment is in SPI flash" 543 depends on !SPL_ENV_IS_NOWHERE 544 depends on ENV_IS_IN_SPI_FLASH 545 default y 546 help 547 Similar to ENV_IS_IN_SPI_FLASH, used for SPL environment. 548 549config SPL_ENV_IS_IN_FLASH 550 bool "SPL Environment in flash memory" 551 depends on !SPL_ENV_IS_NOWHERE 552 depends on ENV_IS_IN_FLASH 553 default y 554 help 555 Similar to ENV_IS_IN_FLASH, used for SPL environment. 556 557endif 558 559if TPL_ENV_SUPPORT 560 561config TPL_ENV_IS_NOWHERE 562 bool "TPL Environment is not stored" 563 default y if ENV_IS_NOWHERE 564 help 565 Similar to ENV_IS_NOWHERE, used for TPL environment. 566 567config TPL_ENV_IS_IN_MMC 568 bool "TPL Environment in an MMC device" 569 depends on !TPL_ENV_IS_NOWHERE 570 depends on ENV_IS_IN_MMC 571 default y 572 help 573 Similar to ENV_IS_IN_MMC, used for TPL environment. 574 575config TPL_ENV_IS_IN_FAT 576 bool "TPL Environment is in a FAT filesystem" 577 depends on !TPL_ENV_IS_NOWHERE 578 depends on ENV_IS_IN_FAT 579 default y 580 help 581 Similar to ENV_IS_IN_FAT, used for TPL environment. 582 583config TPL_ENV_IS_IN_EXT4 584 bool "TPL Environment is in a EXT4 filesystem" 585 depends on !TPL_ENV_IS_NOWHERE 586 depends on ENV_IS_IN_EXT4 587 default y 588 help 589 Similar to ENV_IS_IN_EXT4, used for TPL environment. 590 591config TPL_ENV_IS_IN_NAND 592 bool "TPL Environment in a NAND device" 593 depends on !TPL_ENV_IS_NOWHERE 594 depends on ENV_IS_IN_NAND 595 default y 596 help 597 Similar to ENV_IS_IN_NAND, used for TPL environment. 598 599config TPL_ENV_IS_IN_SPI_FLASH 600 bool "TPL Environment is in SPI flash" 601 depends on !TPL_ENV_IS_NOWHERE 602 depends on ENV_IS_IN_SPI_FLASH 603 default y 604 help 605 Similar to ENV_IS_IN_SPI_FLASH, used for TPL environment. 606 607config TPL_ENV_IS_IN_FLASH 608 bool "TPL Environment in flash memory" 609 depends on !TPL_ENV_IS_NOWHERE 610 depends on ENV_IS_IN_FLASH 611 default y 612 help 613 Similar to ENV_IS_IN_FLASH, used for TPL environment. 614 615endif 616 617endmenu 618