xref: /openbmc/u-boot/drivers/video/video-uclass.c (revision 704744f8)
1 /*
2  * Copyright (c) 2015 Google, Inc
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <dm.h>
9 #include <mapmem.h>
10 #include <stdio_dev.h>
11 #include <video.h>
12 #include <video_console.h>
13 #include <dm/lists.h>
14 #include <dm/device-internal.h>
15 #include <dm/uclass-internal.h>
16 #ifdef CONFIG_SANDBOX
17 #include <asm/sdl.h>
18 #endif
19 
20 /*
21  * Theory of operation:
22  *
23  * Before relocation each device is bound. The driver for each device must
24  * set the @align and @size values in struct video_uc_platdata. This
25  * information represents the requires size and alignment of the frame buffer
26  * for the device. The values can be an over-estimate but cannot be too
27  * small. The actual values will be suppled (in the same manner) by the bind()
28  * method after relocation.
29  *
30  * This information is then picked up by video_reserve() which works out how
31  * much memory is needed for all devices. This is allocated between
32  * gd->video_bottom and gd->video_top.
33  *
34  * After relocation the same process occurs. The driver supplies the same
35  * @size and @align information and this time video_post_bind() checks that
36  * the drivers does not overflow the allocated memory.
37  *
38  * The frame buffer address is actually set (to plat->base) in
39  * video_post_probe(). This function also clears the frame buffer and
40  * allocates a suitable text console device. This can then be used to write
41  * text to the video device.
42  */
43 DECLARE_GLOBAL_DATA_PTR;
44 
45 void video_set_flush_dcache(struct udevice *dev, bool flush)
46 {
47 	struct video_priv *priv = dev_get_uclass_priv(dev);
48 
49 	priv->flush_dcache = flush;
50 }
51 
52 static ulong alloc_fb(struct udevice *dev, ulong *addrp)
53 {
54 	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
55 	ulong base, align, size;
56 
57 	if (!plat->size)
58 		return 0;
59 
60 	align = plat->align ? plat->align : 1 << 20;
61 	base = *addrp - plat->size;
62 	base &= ~(align - 1);
63 	plat->base = base;
64 	size = *addrp - base;
65 	*addrp = base;
66 
67 	return size;
68 }
69 
70 int video_reserve(ulong *addrp)
71 {
72 	struct udevice *dev;
73 	ulong size;
74 
75 	gd->video_top = *addrp;
76 	for (uclass_find_first_device(UCLASS_VIDEO, &dev);
77 	     dev;
78 	     uclass_find_next_device(&dev)) {
79 		size = alloc_fb(dev, addrp);
80 		debug("%s: Reserving %lx bytes at %lx for video device '%s'\n",
81 		      __func__, size, *addrp, dev->name);
82 	}
83 	gd->video_bottom = *addrp;
84 	debug("Video frame buffers from %lx to %lx\n", gd->video_bottom,
85 	      gd->video_top);
86 
87 	return 0;
88 }
89 
90 void video_clear(struct udevice *dev)
91 {
92 	struct video_priv *priv = dev_get_uclass_priv(dev);
93 
94 	switch (priv->bpix) {
95 	case VIDEO_BPP16: {
96 		u16 *ppix = priv->fb;
97 		u16 *end = priv->fb + priv->fb_size;
98 
99 		while (ppix < end)
100 			*ppix++ = priv->colour_bg;
101 		break;
102 	}
103 	case VIDEO_BPP32: {
104 		u32 *ppix = priv->fb;
105 		u32 *end = priv->fb + priv->fb_size;
106 
107 		while (ppix < end)
108 			*ppix++ = priv->colour_bg;
109 		break;
110 	}
111 	default:
112 		memset(priv->fb, priv->colour_bg, priv->fb_size);
113 		break;
114 	}
115 }
116 
117 void video_set_default_colors(struct video_priv *priv)
118 {
119 #ifdef CONFIG_SYS_WHITE_ON_BLACK
120 	/* White is used when switching to bold, use light gray here */
121 	priv->fg_col_idx = VID_LIGHT_GRAY;
122 	priv->colour_fg = vid_console_color(priv, VID_LIGHT_GRAY);
123 	priv->colour_bg = vid_console_color(priv, VID_BLACK);
124 #else
125 	priv->fg_col_idx = VID_BLACK;
126 	priv->colour_fg = vid_console_color(priv, VID_BLACK);
127 	priv->colour_bg = vid_console_color(priv, VID_WHITE);
128 #endif
129 }
130 
131 /* Flush video activity to the caches */
132 void video_sync(struct udevice *vid)
133 {
134 	/*
135 	 * flush_dcache_range() is declared in common.h but it seems that some
136 	 * architectures do not actually implement it. Is there a way to find
137 	 * out whether it exists? For now, ARM is safe.
138 	 */
139 #if defined(CONFIG_ARM) && !defined(CONFIG_SYS_DCACHE_OFF)
140 	struct video_priv *priv = dev_get_uclass_priv(vid);
141 
142 	if (priv->flush_dcache) {
143 		flush_dcache_range((ulong)priv->fb,
144 				   ALIGN((ulong)priv->fb + priv->fb_size,
145 					 CONFIG_SYS_CACHELINE_SIZE));
146 	}
147 #elif defined(CONFIG_VIDEO_SANDBOX_SDL)
148 	struct video_priv *priv = dev_get_uclass_priv(vid);
149 	static ulong last_sync;
150 
151 	if (get_timer(last_sync) > 10) {
152 		sandbox_sdl_sync(priv->fb);
153 		last_sync = get_timer(0);
154 	}
155 #endif
156 }
157 
158 void video_sync_all(void)
159 {
160 	struct udevice *dev;
161 
162 	for (uclass_find_first_device(UCLASS_VIDEO, &dev);
163 	     dev;
164 	     uclass_find_next_device(&dev)) {
165 		if (device_active(dev))
166 			video_sync(dev);
167 	}
168 }
169 
170 int video_get_xsize(struct udevice *dev)
171 {
172 	struct video_priv *priv = dev_get_uclass_priv(dev);
173 
174 	return priv->xsize;
175 }
176 
177 int video_get_ysize(struct udevice *dev)
178 {
179 	struct video_priv *priv = dev_get_uclass_priv(dev);
180 
181 	return priv->ysize;
182 }
183 
184 /* Set up the colour map */
185 static int video_pre_probe(struct udevice *dev)
186 {
187 	struct video_priv *priv = dev_get_uclass_priv(dev);
188 
189 	priv->cmap = calloc(256, sizeof(ushort));
190 	if (!priv->cmap)
191 		return -ENOMEM;
192 
193 	return 0;
194 }
195 
196 static int video_pre_remove(struct udevice *dev)
197 {
198 	struct video_priv *priv = dev_get_uclass_priv(dev);
199 
200 	free(priv->cmap);
201 
202 	return 0;
203 }
204 
205 /* Set up the display ready for use */
206 static int video_post_probe(struct udevice *dev)
207 {
208 	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
209 	struct video_priv *priv = dev_get_uclass_priv(dev);
210 	char name[30], drv[15], *str;
211 	const char *drv_name = drv;
212 	struct udevice *cons;
213 	int ret;
214 
215 	/* Set up the line and display size */
216 	priv->fb = map_sysmem(plat->base, plat->size);
217 	priv->line_length = priv->xsize * VNBYTES(priv->bpix);
218 	priv->fb_size = priv->line_length * priv->ysize;
219 
220 	/* Set up colors  */
221 	video_set_default_colors(priv);
222 
223 	if (!CONFIG_IS_ENABLED(NO_FB_CLEAR))
224 		video_clear(dev);
225 
226 	/*
227 	 * Create a text console device. For now we always do this, although
228 	 * it might be useful to support only bitmap drawing on the device
229 	 * for boards that don't need to display text. We create a TrueType
230 	 * console if enabled, a rotated console if the video driver requests
231 	 * it, otherwise a normal console.
232 	 *
233 	 * The console can be override by setting vidconsole_drv_name before
234 	 * probing this video driver, or in the probe() method.
235 	 *
236 	 * TrueType does not support rotation at present so fall back to the
237 	 * rotated console in that case.
238 	 */
239 	if (!priv->rot && IS_ENABLED(CONFIG_CONSOLE_TRUETYPE)) {
240 		snprintf(name, sizeof(name), "%s.vidconsole_tt", dev->name);
241 		strcpy(drv, "vidconsole_tt");
242 	} else {
243 		snprintf(name, sizeof(name), "%s.vidconsole%d", dev->name,
244 			 priv->rot);
245 		snprintf(drv, sizeof(drv), "vidconsole%d", priv->rot);
246 	}
247 
248 	str = strdup(name);
249 	if (!str)
250 		return -ENOMEM;
251 	if (priv->vidconsole_drv_name)
252 		drv_name = priv->vidconsole_drv_name;
253 	ret = device_bind_driver(dev, drv_name, str, &cons);
254 	if (ret) {
255 		debug("%s: Cannot bind console driver\n", __func__);
256 		return ret;
257 	}
258 
259 	ret = device_probe(cons);
260 	if (ret) {
261 		debug("%s: Cannot probe console driver\n", __func__);
262 		return ret;
263 	}
264 
265 	return 0;
266 };
267 
268 /* Post-relocation, allocate memory for the frame buffer */
269 static int video_post_bind(struct udevice *dev)
270 {
271 	ulong addr = gd->video_top;
272 	ulong size;
273 
274 	/* Before relocation there is nothing to do here */
275 	if ((!gd->flags & GD_FLG_RELOC))
276 		return 0;
277 	size = alloc_fb(dev, &addr);
278 	if (addr < gd->video_bottom) {
279 		/* Device tree node may need the 'u-boot,dm-pre-reloc' tag */
280 		printf("Video device '%s' cannot allocate frame buffer memory -ensure the device is set up before relocation\n",
281 		       dev->name);
282 		return -ENOSPC;
283 	}
284 	debug("%s: Claiming %lx bytes at %lx for video device '%s'\n",
285 	      __func__, size, addr, dev->name);
286 	gd->video_bottom = addr;
287 
288 	return 0;
289 }
290 
291 UCLASS_DRIVER(video) = {
292 	.id		= UCLASS_VIDEO,
293 	.name		= "video",
294 	.flags		= DM_UC_FLAG_SEQ_ALIAS,
295 	.post_bind	= video_post_bind,
296 	.pre_probe	= video_pre_probe,
297 	.post_probe	= video_post_probe,
298 	.pre_remove	= video_pre_remove,
299 	.per_device_auto_alloc_size	= sizeof(struct video_priv),
300 	.per_device_platdata_auto_alloc_size = sizeof(struct video_uc_platdata),
301 };
302