1 /* 2 * Copyright (c) 2011 The Chromium OS Authors. 3 * SPDX-License-Identifier: GPL-2.0+ 4 */ 5 6 #include <common.h> 7 #include <dm.h> 8 #include <fdtdec.h> 9 #include <pwm.h> 10 #include <video.h> 11 #include <asm/system.h> 12 #include <asm/gpio.h> 13 #include <asm/io.h> 14 15 #include <asm/arch/clock.h> 16 #include <asm/arch/funcmux.h> 17 #include <asm/arch/pinmux.h> 18 #include <asm/arch/pwm.h> 19 #include <asm/arch/display.h> 20 #include <asm/arch-tegra/timer.h> 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 /* These are the stages we go throuh in enabling the LCD */ 25 enum stage_t { 26 STAGE_START, 27 STAGE_PANEL_VDD, 28 STAGE_LVDS, 29 STAGE_BACKLIGHT_VDD, 30 STAGE_PWM, 31 STAGE_BACKLIGHT_EN, 32 STAGE_DONE, 33 }; 34 35 #define FDT_LCD_TIMINGS 4 36 37 enum { 38 FDT_LCD_TIMING_REF_TO_SYNC, 39 FDT_LCD_TIMING_SYNC_WIDTH, 40 FDT_LCD_TIMING_BACK_PORCH, 41 FDT_LCD_TIMING_FRONT_PORCH, 42 43 FDT_LCD_TIMING_COUNT, 44 }; 45 46 enum lcd_cache_t { 47 FDT_LCD_CACHE_OFF = 0, 48 FDT_LCD_CACHE_WRITE_THROUGH = 1 << 0, 49 FDT_LCD_CACHE_WRITE_BACK = 1 << 1, 50 FDT_LCD_CACHE_FLUSH = 1 << 2, 51 FDT_LCD_CACHE_WRITE_BACK_FLUSH = FDT_LCD_CACHE_WRITE_BACK | 52 FDT_LCD_CACHE_FLUSH, 53 }; 54 55 /* Information about the display controller */ 56 struct tegra_lcd_priv { 57 enum stage_t stage; /* Current stage we are at */ 58 unsigned long timer_next; /* Time we can move onto next stage */ 59 int width; /* width in pixels */ 60 int height; /* height in pixels */ 61 62 /* 63 * log2 of number of bpp, in general, unless it bpp is 24 in which 64 * case this field holds 24 also! This is a U-Boot thing. 65 */ 66 int log2_bpp; 67 struct disp_ctlr *disp; /* Display controller to use */ 68 fdt_addr_t frame_buffer; /* Address of frame buffer */ 69 unsigned pixel_clock; /* Pixel clock in Hz */ 70 uint horiz_timing[FDT_LCD_TIMING_COUNT]; /* Horizontal timing */ 71 uint vert_timing[FDT_LCD_TIMING_COUNT]; /* Vertical timing */ 72 struct udevice *pwm; 73 int pwm_channel; /* PWM channel to use for backlight */ 74 enum lcd_cache_t cache_type; 75 76 struct gpio_desc backlight_en; /* GPIO for backlight enable */ 77 struct gpio_desc lvds_shutdown; /* GPIO for lvds shutdown */ 78 struct gpio_desc backlight_vdd; /* GPIO for backlight vdd */ 79 struct gpio_desc panel_vdd; /* GPIO for panel vdd */ 80 /* 81 * Panel required timings 82 * Timing 1: delay between panel_vdd-rise and data-rise 83 * Timing 2: delay between data-rise and backlight_vdd-rise 84 * Timing 3: delay between backlight_vdd and pwm-rise 85 * Timing 4: delay between pwm-rise and backlight_en-rise 86 */ 87 uint panel_timings[FDT_LCD_TIMINGS]; 88 }; 89 90 enum { 91 /* Maximum LCD size we support */ 92 LCD_MAX_WIDTH = 1366, 93 LCD_MAX_HEIGHT = 768, 94 LCD_MAX_LOG2_BPP = VIDEO_BPP16, 95 }; 96 97 static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win) 98 { 99 unsigned h_dda, v_dda; 100 unsigned long val; 101 102 val = readl(&dc->cmd.disp_win_header); 103 val |= WINDOW_A_SELECT; 104 writel(val, &dc->cmd.disp_win_header); 105 106 writel(win->fmt, &dc->win.color_depth); 107 108 clrsetbits_le32(&dc->win.byte_swap, BYTE_SWAP_MASK, 109 BYTE_SWAP_NOSWAP << BYTE_SWAP_SHIFT); 110 111 val = win->out_x << H_POSITION_SHIFT; 112 val |= win->out_y << V_POSITION_SHIFT; 113 writel(val, &dc->win.pos); 114 115 val = win->out_w << H_SIZE_SHIFT; 116 val |= win->out_h << V_SIZE_SHIFT; 117 writel(val, &dc->win.size); 118 119 val = (win->w * win->bpp / 8) << H_PRESCALED_SIZE_SHIFT; 120 val |= win->h << V_PRESCALED_SIZE_SHIFT; 121 writel(val, &dc->win.prescaled_size); 122 123 writel(0, &dc->win.h_initial_dda); 124 writel(0, &dc->win.v_initial_dda); 125 126 h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1U); 127 v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1U); 128 129 val = h_dda << H_DDA_INC_SHIFT; 130 val |= v_dda << V_DDA_INC_SHIFT; 131 writel(val, &dc->win.dda_increment); 132 133 writel(win->stride, &dc->win.line_stride); 134 writel(0, &dc->win.buf_stride); 135 136 val = WIN_ENABLE; 137 if (win->bpp < 24) 138 val |= COLOR_EXPAND; 139 writel(val, &dc->win.win_opt); 140 141 writel((unsigned long)win->phys_addr, &dc->winbuf.start_addr); 142 writel(win->x, &dc->winbuf.addr_h_offset); 143 writel(win->y, &dc->winbuf.addr_v_offset); 144 145 writel(0xff00, &dc->win.blend_nokey); 146 writel(0xff00, &dc->win.blend_1win); 147 148 val = GENERAL_ACT_REQ | WIN_A_ACT_REQ; 149 val |= GENERAL_UPDATE | WIN_A_UPDATE; 150 writel(val, &dc->cmd.state_ctrl); 151 } 152 153 static void write_pair(struct tegra_lcd_priv *priv, int item, u32 *reg) 154 { 155 writel(priv->horiz_timing[item] | 156 (priv->vert_timing[item] << 16), reg); 157 } 158 159 static int update_display_mode(struct dc_disp_reg *disp, 160 struct tegra_lcd_priv *priv) 161 { 162 unsigned long val; 163 unsigned long rate; 164 unsigned long div; 165 166 writel(0x0, &disp->disp_timing_opt); 167 write_pair(priv, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync); 168 write_pair(priv, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width); 169 write_pair(priv, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch); 170 write_pair(priv, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch); 171 172 writel(priv->width | (priv->height << 16), &disp->disp_active); 173 174 val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT; 175 val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT; 176 writel(val, &disp->data_enable_opt); 177 178 val = DATA_FORMAT_DF1P1C << DATA_FORMAT_SHIFT; 179 val |= DATA_ALIGNMENT_MSB << DATA_ALIGNMENT_SHIFT; 180 val |= DATA_ORDER_RED_BLUE << DATA_ORDER_SHIFT; 181 writel(val, &disp->disp_interface_ctrl); 182 183 /* 184 * The pixel clock divider is in 7.1 format (where the bottom bit 185 * represents 0.5). Here we calculate the divider needed to get from 186 * the display clock (typically 600MHz) to the pixel clock. We round 187 * up or down as requried. 188 */ 189 rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL); 190 div = ((rate * 2 + priv->pixel_clock / 2) / priv->pixel_clock) - 2; 191 debug("Display clock %lu, divider %lu\n", rate, div); 192 193 writel(0x00010001, &disp->shift_clk_opt); 194 195 val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT; 196 val |= div << SHIFT_CLK_DIVIDER_SHIFT; 197 writel(val, &disp->disp_clk_ctrl); 198 199 return 0; 200 } 201 202 /* Start up the display and turn on power to PWMs */ 203 static void basic_init(struct dc_cmd_reg *cmd) 204 { 205 u32 val; 206 207 writel(0x00000100, &cmd->gen_incr_syncpt_ctrl); 208 writel(0x0000011a, &cmd->cont_syncpt_vsync); 209 writel(0x00000000, &cmd->int_type); 210 writel(0x00000000, &cmd->int_polarity); 211 writel(0x00000000, &cmd->int_mask); 212 writel(0x00000000, &cmd->int_enb); 213 214 val = PW0_ENABLE | PW1_ENABLE | PW2_ENABLE; 215 val |= PW3_ENABLE | PW4_ENABLE | PM0_ENABLE; 216 val |= PM1_ENABLE; 217 writel(val, &cmd->disp_pow_ctrl); 218 219 val = readl(&cmd->disp_cmd); 220 val |= CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT; 221 writel(val, &cmd->disp_cmd); 222 } 223 224 static void basic_init_timer(struct dc_disp_reg *disp) 225 { 226 writel(0x00000020, &disp->mem_high_pri); 227 writel(0x00000001, &disp->mem_high_pri_timer); 228 } 229 230 static const u32 rgb_enb_tab[PIN_REG_COUNT] = { 231 0x00000000, 232 0x00000000, 233 0x00000000, 234 0x00000000, 235 }; 236 237 static const u32 rgb_polarity_tab[PIN_REG_COUNT] = { 238 0x00000000, 239 0x01000000, 240 0x00000000, 241 0x00000000, 242 }; 243 244 static const u32 rgb_data_tab[PIN_REG_COUNT] = { 245 0x00000000, 246 0x00000000, 247 0x00000000, 248 0x00000000, 249 }; 250 251 static const u32 rgb_sel_tab[PIN_OUTPUT_SEL_COUNT] = { 252 0x00000000, 253 0x00000000, 254 0x00000000, 255 0x00000000, 256 0x00210222, 257 0x00002200, 258 0x00020000, 259 }; 260 261 static void rgb_enable(struct dc_com_reg *com) 262 { 263 int i; 264 265 for (i = 0; i < PIN_REG_COUNT; i++) { 266 writel(rgb_enb_tab[i], &com->pin_output_enb[i]); 267 writel(rgb_polarity_tab[i], &com->pin_output_polarity[i]); 268 writel(rgb_data_tab[i], &com->pin_output_data[i]); 269 } 270 271 for (i = 0; i < PIN_OUTPUT_SEL_COUNT; i++) 272 writel(rgb_sel_tab[i], &com->pin_output_sel[i]); 273 } 274 275 static int setup_window(struct disp_ctl_win *win, 276 struct tegra_lcd_priv *priv) 277 { 278 win->x = 0; 279 win->y = 0; 280 win->w = priv->width; 281 win->h = priv->height; 282 win->out_x = 0; 283 win->out_y = 0; 284 win->out_w = priv->width; 285 win->out_h = priv->height; 286 win->phys_addr = priv->frame_buffer; 287 win->stride = priv->width * (1 << priv->log2_bpp) / 8; 288 debug("%s: depth = %d\n", __func__, priv->log2_bpp); 289 switch (priv->log2_bpp) { 290 case 5: 291 case 24: 292 win->fmt = COLOR_DEPTH_R8G8B8A8; 293 win->bpp = 32; 294 break; 295 case 4: 296 win->fmt = COLOR_DEPTH_B5G6R5; 297 win->bpp = 16; 298 break; 299 300 default: 301 debug("Unsupported LCD bit depth"); 302 return -1; 303 } 304 305 return 0; 306 } 307 308 static void debug_timing(const char *name, unsigned int timing[]) 309 { 310 #ifdef DEBUG 311 int i; 312 313 debug("%s timing: ", name); 314 for (i = 0; i < FDT_LCD_TIMING_COUNT; i++) 315 debug("%d ", timing[i]); 316 debug("\n"); 317 #endif 318 } 319 320 /** 321 * Register a new display based on device tree configuration. 322 * 323 * The frame buffer can be positioned by U-Boot or overriden by the fdt. 324 * You should pass in the U-Boot address here, and check the contents of 325 * struct tegra_lcd_priv to see what was actually chosen. 326 * 327 * @param blob Device tree blob 328 * @param priv Driver's private data 329 * @param default_lcd_base Default address of LCD frame buffer 330 * @return 0 if ok, -1 on error (unsupported bits per pixel) 331 */ 332 static int tegra_display_probe(const void *blob, struct tegra_lcd_priv *priv, 333 void *default_lcd_base) 334 { 335 struct disp_ctl_win window; 336 struct dc_ctlr *dc; 337 338 priv->frame_buffer = (u32)default_lcd_base; 339 340 dc = (struct dc_ctlr *)priv->disp; 341 342 /* 343 * A header file for clock constants was NAKed upstream. 344 * TODO: Put this into the FDT and fdt_lcd struct when we have clock 345 * support there 346 */ 347 clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH, 348 144 * 1000000); 349 clock_start_periph_pll(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL, 350 600 * 1000000); 351 basic_init(&dc->cmd); 352 basic_init_timer(&dc->disp); 353 rgb_enable(&dc->com); 354 355 if (priv->pixel_clock) 356 update_display_mode(&dc->disp, priv); 357 358 if (setup_window(&window, priv)) 359 return -1; 360 361 update_window(dc, &window); 362 363 return 0; 364 } 365 366 /** 367 * Handle the next stage of device init 368 */ 369 static int handle_stage(const void *blob, struct tegra_lcd_priv *priv) 370 { 371 debug("%s: stage %d\n", __func__, priv->stage); 372 373 /* do the things for this stage */ 374 switch (priv->stage) { 375 case STAGE_START: 376 /* 377 * It is possible that the FDT has requested that the LCD be 378 * disabled. We currently don't support this. It would require 379 * changes to U-Boot LCD subsystem to have LCD support 380 * compiled in but not used. An easier option might be to 381 * still have a frame buffer, but leave the backlight off and 382 * remove all mention of lcd in the stdout environment 383 * variable. 384 */ 385 386 funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT); 387 break; 388 case STAGE_PANEL_VDD: 389 if (dm_gpio_is_valid(&priv->panel_vdd)) 390 dm_gpio_set_value(&priv->panel_vdd, 1); 391 break; 392 case STAGE_LVDS: 393 if (dm_gpio_is_valid(&priv->lvds_shutdown)) 394 dm_gpio_set_value(&priv->lvds_shutdown, 1); 395 break; 396 case STAGE_BACKLIGHT_VDD: 397 if (dm_gpio_is_valid(&priv->backlight_vdd)) 398 dm_gpio_set_value(&priv->backlight_vdd, 1); 399 break; 400 case STAGE_PWM: 401 /* Enable PWM at 15/16 high, 32768 Hz with divider 1 */ 402 pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_PWM); 403 pinmux_tristate_disable(PMUX_PINGRP_GPU); 404 405 pwm_set_config(priv->pwm, priv->pwm_channel, 0xdf, 0xff); 406 pwm_set_enable(priv->pwm, priv->pwm_channel, true); 407 break; 408 case STAGE_BACKLIGHT_EN: 409 if (dm_gpio_is_valid(&priv->backlight_en)) 410 dm_gpio_set_value(&priv->backlight_en, 1); 411 break; 412 case STAGE_DONE: 413 break; 414 } 415 416 /* set up timer for next stage */ 417 priv->timer_next = timer_get_us(); 418 if (priv->stage < FDT_LCD_TIMINGS) 419 priv->timer_next += priv->panel_timings[priv->stage] * 1000; 420 421 /* move to next stage */ 422 priv->stage++; 423 return 0; 424 } 425 426 /** 427 * Perform the next stage of the LCD init if it is time to do so. 428 * 429 * LCD init can be time-consuming because of the number of delays we need 430 * while waiting for the backlight power supply, etc. This function can 431 * be called at various times during U-Boot operation to advance the 432 * initialization of the LCD to the next stage if sufficient time has 433 * passed since the last stage. It keeps track of what stage it is up to 434 * and the time that it is permitted to move to the next stage. 435 * 436 * The final call should have wait=1 to complete the init. 437 * 438 * @param blob fdt blob containing LCD information 439 * @param wait 1 to wait until all init is complete, and then return 440 * 0 to return immediately, potentially doing nothing if it is 441 * not yet time for the next init. 442 */ 443 static int tegra_lcd_check_next_stage(const void *blob, 444 struct tegra_lcd_priv *priv, int wait) 445 { 446 if (priv->stage == STAGE_DONE) 447 return 0; 448 449 do { 450 /* wait if we need to */ 451 debug("%s: stage %d\n", __func__, priv->stage); 452 if (priv->stage != STAGE_START) { 453 int delay = priv->timer_next - timer_get_us(); 454 455 if (delay > 0) { 456 if (wait) 457 udelay(delay); 458 else 459 return 0; 460 } 461 } 462 463 if (handle_stage(blob, priv)) 464 return -1; 465 } while (wait && priv->stage != STAGE_DONE); 466 if (priv->stage == STAGE_DONE) 467 debug("%s: LCD init complete\n", __func__); 468 469 return 0; 470 } 471 472 static int tegra_lcd_probe(struct udevice *dev) 473 { 474 struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); 475 struct video_priv *uc_priv = dev_get_uclass_priv(dev); 476 struct tegra_lcd_priv *priv = dev_get_priv(dev); 477 const void *blob = gd->fdt_blob; 478 int type = DCACHE_OFF; 479 480 /* Initialize the Tegra display controller */ 481 if (tegra_display_probe(blob, priv, (void *)plat->base)) { 482 printf("%s: Failed to probe display driver\n", __func__); 483 return -1; 484 } 485 486 tegra_lcd_check_next_stage(blob, priv, 1); 487 488 /* Set up the LCD caching as requested */ 489 if (priv->cache_type & FDT_LCD_CACHE_WRITE_THROUGH) 490 type = DCACHE_WRITETHROUGH; 491 else if (priv->cache_type & FDT_LCD_CACHE_WRITE_BACK) 492 type = DCACHE_WRITEBACK; 493 mmu_set_region_dcache_behaviour(priv->frame_buffer, plat->size, type); 494 495 /* Enable flushing after LCD writes if requested */ 496 video_set_flush_dcache(dev, priv->cache_type & FDT_LCD_CACHE_FLUSH); 497 498 uc_priv->xsize = priv->width; 499 uc_priv->ysize = priv->height; 500 uc_priv->bpix = priv->log2_bpp; 501 debug("LCD frame buffer at %pa, size %x\n", &priv->frame_buffer, 502 plat->size); 503 504 return 0; 505 } 506 507 static int tegra_lcd_ofdata_to_platdata(struct udevice *dev) 508 { 509 struct tegra_lcd_priv *priv = dev_get_priv(dev); 510 struct fdtdec_phandle_args args; 511 const void *blob = gd->fdt_blob; 512 int node = dev->of_offset; 513 int front, back, ref; 514 int panel_node; 515 int rgb; 516 int bpp, bit; 517 int ret; 518 519 priv->disp = (struct disp_ctlr *)dev_get_addr(dev); 520 if (!priv->disp) { 521 debug("%s: No display controller address\n", __func__); 522 return -EINVAL; 523 } 524 525 rgb = fdt_subnode_offset(blob, node, "rgb"); 526 527 panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel"); 528 if (panel_node < 0) { 529 debug("%s: Cannot find panel information\n", __func__); 530 return -EINVAL; 531 } 532 533 priv->width = fdtdec_get_int(blob, panel_node, "xres", -1); 534 priv->height = fdtdec_get_int(blob, panel_node, "yres", -1); 535 priv->pixel_clock = fdtdec_get_int(blob, panel_node, "clock", 0); 536 if (!priv->pixel_clock || priv->width == -1 || priv->height == -1) { 537 debug("%s: Pixel parameters missing\n", __func__); 538 return -EINVAL; 539 } 540 541 back = fdtdec_get_int(blob, panel_node, "left-margin", -1); 542 front = fdtdec_get_int(blob, panel_node, "right-margin", -1); 543 ref = fdtdec_get_int(blob, panel_node, "hsync-len", -1); 544 if ((back | front | ref) == -1) { 545 debug("%s: Horizontal parameters missing\n", __func__); 546 return -EINVAL; 547 } 548 549 /* Use a ref-to-sync of 1 always, and take this from the front porch */ 550 priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; 551 priv->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; 552 priv->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back; 553 priv->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - 554 priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC]; 555 debug_timing("horiz", priv->horiz_timing); 556 557 back = fdtdec_get_int(blob, panel_node, "upper-margin", -1); 558 front = fdtdec_get_int(blob, panel_node, "lower-margin", -1); 559 ref = fdtdec_get_int(blob, panel_node, "vsync-len", -1); 560 if ((back | front | ref) == -1) { 561 debug("%s: Vertical parameters missing\n", __func__); 562 return -EINVAL; 563 } 564 565 priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; 566 priv->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; 567 priv->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back; 568 priv->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - 569 priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC]; 570 debug_timing("vert", priv->vert_timing); 571 572 bpp = fdtdec_get_int(blob, panel_node, "nvidia,bits-per-pixel", -1); 573 bit = ffs(bpp) - 1; 574 if (bpp == (1 << bit)) 575 priv->log2_bpp = bit; 576 else 577 priv->log2_bpp = bpp; 578 if (bpp == -1) { 579 debug("%s: Pixel bpp parameters missing\n", __func__); 580 return -EINVAL; 581 } 582 583 if (fdtdec_parse_phandle_with_args(blob, panel_node, "nvidia,pwm", 584 "#pwm-cells", 0, 0, &args)) { 585 debug("%s: Unable to decode PWM\n", __func__); 586 return -EINVAL; 587 } 588 589 ret = uclass_get_device_by_of_offset(UCLASS_PWM, args.node, &priv->pwm); 590 if (ret) { 591 debug("%s: Unable to find PWM\n", __func__); 592 return -EINVAL; 593 } 594 priv->pwm_channel = args.args[0]; 595 596 priv->cache_type = fdtdec_get_int(blob, panel_node, "nvidia,cache-type", 597 FDT_LCD_CACHE_WRITE_BACK_FLUSH); 598 599 /* These GPIOs are all optional */ 600 gpio_request_by_name_nodev(blob, panel_node, 601 "nvidia,backlight-enable-gpios", 0, 602 &priv->backlight_en, GPIOD_IS_OUT); 603 gpio_request_by_name_nodev(blob, panel_node, 604 "nvidia,lvds-shutdown-gpios", 0, 605 &priv->lvds_shutdown, GPIOD_IS_OUT); 606 gpio_request_by_name_nodev(blob, panel_node, 607 "nvidia,backlight-vdd-gpios", 0, 608 &priv->backlight_vdd, GPIOD_IS_OUT); 609 gpio_request_by_name_nodev(blob, panel_node, 610 "nvidia,panel-vdd-gpios", 0, 611 &priv->panel_vdd, GPIOD_IS_OUT); 612 613 if (fdtdec_get_int_array(blob, panel_node, "nvidia,panel-timings", 614 priv->panel_timings, FDT_LCD_TIMINGS)) 615 return -EINVAL; 616 617 return 0; 618 } 619 620 static int tegra_lcd_bind(struct udevice *dev) 621 { 622 struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); 623 624 plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT * 625 (1 << LCD_MAX_LOG2_BPP) / 8; 626 627 return 0; 628 } 629 630 static const struct video_ops tegra_lcd_ops = { 631 }; 632 633 static const struct udevice_id tegra_lcd_ids[] = { 634 { .compatible = "nvidia,tegra20-dc" }, 635 { } 636 }; 637 638 U_BOOT_DRIVER(tegra_lcd) = { 639 .name = "tegra_lcd", 640 .id = UCLASS_VIDEO, 641 .of_match = tegra_lcd_ids, 642 .ops = &tegra_lcd_ops, 643 .bind = tegra_lcd_bind, 644 .probe = tegra_lcd_probe, 645 .ofdata_to_platdata = tegra_lcd_ofdata_to_platdata, 646 .priv_auto_alloc_size = sizeof(struct tegra_lcd_priv), 647 }; 648