1 /* 2 * Copyright (c) 2011 The Chromium OS Authors. 3 * SPDX-License-Identifier: GPL-2.0+ 4 */ 5 6 #include <common.h> 7 #include <fdtdec.h> 8 #include <lcd.h> 9 10 #include <asm/system.h> 11 #include <asm/gpio.h> 12 13 #include <asm/arch/clock.h> 14 #include <asm/arch/funcmux.h> 15 #include <asm/arch/pinmux.h> 16 #include <asm/arch/pwm.h> 17 #include <asm/arch/display.h> 18 #include <asm/arch-tegra/timer.h> 19 20 DECLARE_GLOBAL_DATA_PTR; 21 22 /* These are the stages we go throuh in enabling the LCD */ 23 enum stage_t { 24 STAGE_START, 25 STAGE_PANEL_VDD, 26 STAGE_LVDS, 27 STAGE_BACKLIGHT_VDD, 28 STAGE_PWM, 29 STAGE_BACKLIGHT_EN, 30 STAGE_DONE, 31 }; 32 33 static enum stage_t stage; /* Current stage we are at */ 34 static unsigned long timer_next; /* Time we can move onto next stage */ 35 36 /* Our LCD config, set up in handle_stage() */ 37 static struct fdt_panel_config config; 38 struct fdt_disp_config *disp_config; /* Display controller config */ 39 40 enum { 41 /* Maximum LCD size we support */ 42 LCD_MAX_WIDTH = 1366, 43 LCD_MAX_HEIGHT = 768, 44 LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */ 45 }; 46 47 vidinfo_t panel_info = { 48 /* Insert a value here so that we don't end up in the BSS */ 49 .vl_col = -1, 50 }; 51 52 #ifndef CONFIG_OF_CONTROL 53 #error "You must enable CONFIG_OF_CONTROL to get Tegra LCD support" 54 #endif 55 56 static void update_panel_size(struct fdt_disp_config *config) 57 { 58 panel_info.vl_col = config->width; 59 panel_info.vl_row = config->height; 60 panel_info.vl_bpix = config->log2_bpp; 61 } 62 63 /* 64 * Main init function called by lcd driver. 65 * Inits and then prints test pattern if required. 66 */ 67 68 void lcd_ctrl_init(void *lcdbase) 69 { 70 int type = DCACHE_OFF; 71 int size; 72 73 assert(disp_config); 74 75 /* Make sure that we can acommodate the selected LCD */ 76 assert(disp_config->width <= LCD_MAX_WIDTH); 77 assert(disp_config->height <= LCD_MAX_HEIGHT); 78 assert(disp_config->log2_bpp <= LCD_MAX_LOG2_BPP); 79 if (disp_config->width <= LCD_MAX_WIDTH 80 && disp_config->height <= LCD_MAX_HEIGHT 81 && disp_config->log2_bpp <= LCD_MAX_LOG2_BPP) 82 update_panel_size(disp_config); 83 size = lcd_get_size(&lcd_line_length); 84 85 /* Set up the LCD caching as requested */ 86 if (config.cache_type & FDT_LCD_CACHE_WRITE_THROUGH) 87 type = DCACHE_WRITETHROUGH; 88 else if (config.cache_type & FDT_LCD_CACHE_WRITE_BACK) 89 type = DCACHE_WRITEBACK; 90 mmu_set_region_dcache_behaviour(disp_config->frame_buffer, size, type); 91 92 /* Enable flushing after LCD writes if requested */ 93 lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH); 94 95 debug("LCD frame buffer at %08X\n", disp_config->frame_buffer); 96 } 97 98 ulong calc_fbsize(void) 99 { 100 return (panel_info.vl_col * panel_info.vl_row * 101 NBITS(panel_info.vl_bpix)) / 8; 102 } 103 104 void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) 105 { 106 } 107 108 void tegra_lcd_early_init(const void *blob) 109 { 110 /* 111 * Go with the maximum size for now. We will fix this up after 112 * relocation. These values are only used for memory alocation. 113 */ 114 panel_info.vl_col = LCD_MAX_WIDTH; 115 panel_info.vl_row = LCD_MAX_HEIGHT; 116 panel_info.vl_bpix = LCD_MAX_LOG2_BPP; 117 } 118 119 /** 120 * Decode the panel information from the fdt. 121 * 122 * @param blob fdt blob 123 * @param config structure to store fdt config into 124 * @return 0 if ok, -ve on error 125 */ 126 static int fdt_decode_lcd(const void *blob, struct fdt_panel_config *config) 127 { 128 int display_node; 129 130 disp_config = tegra_display_get_config(); 131 if (!disp_config) { 132 debug("%s: Display controller is not configured\n", __func__); 133 return -1; 134 } 135 display_node = disp_config->panel_node; 136 if (display_node < 0) { 137 debug("%s: No panel configuration available\n", __func__); 138 return -1; 139 } 140 141 config->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm"); 142 if (config->pwm_channel < 0) { 143 debug("%s: Unable to request PWM channel\n", __func__); 144 return -1; 145 } 146 147 config->cache_type = fdtdec_get_int(blob, display_node, 148 "nvidia,cache-type", 149 FDT_LCD_CACHE_WRITE_BACK_FLUSH); 150 151 /* These GPIOs are all optional */ 152 fdtdec_decode_gpio(blob, display_node, "nvidia,backlight-enable-gpios", 153 &config->backlight_en); 154 fdtdec_decode_gpio(blob, display_node, "nvidia,lvds-shutdown-gpios", 155 &config->lvds_shutdown); 156 fdtdec_decode_gpio(blob, display_node, "nvidia,backlight-vdd-gpios", 157 &config->backlight_vdd); 158 fdtdec_decode_gpio(blob, display_node, "nvidia,panel-vdd-gpios", 159 &config->panel_vdd); 160 161 return fdtdec_get_int_array(blob, display_node, "nvidia,panel-timings", 162 config->panel_timings, FDT_LCD_TIMINGS); 163 } 164 165 /** 166 * Handle the next stage of device init 167 */ 168 static int handle_stage(const void *blob) 169 { 170 debug("%s: stage %d\n", __func__, stage); 171 172 /* do the things for this stage */ 173 switch (stage) { 174 case STAGE_START: 175 /* Initialize the Tegra display controller */ 176 if (tegra_display_probe(gd->fdt_blob, (void *)gd->fb_base)) { 177 printf("%s: Failed to probe display driver\n", 178 __func__); 179 return -1; 180 } 181 182 /* get panel details */ 183 if (fdt_decode_lcd(blob, &config)) { 184 printf("No valid LCD information in device tree\n"); 185 return -1; 186 } 187 188 /* 189 * It is possible that the FDT has requested that the LCD be 190 * disabled. We currently don't support this. It would require 191 * changes to U-Boot LCD subsystem to have LCD support 192 * compiled in but not used. An easier option might be to 193 * still have a frame buffer, but leave the backlight off and 194 * remove all mention of lcd in the stdout environment 195 * variable. 196 */ 197 198 funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT); 199 200 fdtdec_setup_gpio(&config.panel_vdd); 201 fdtdec_setup_gpio(&config.lvds_shutdown); 202 fdtdec_setup_gpio(&config.backlight_vdd); 203 fdtdec_setup_gpio(&config.backlight_en); 204 205 /* 206 * TODO: If fdt includes output flag we can omit this code 207 * since fdtdec_setup_gpio will do it for us. 208 */ 209 if (fdt_gpio_isvalid(&config.panel_vdd)) 210 gpio_direction_output(config.panel_vdd.gpio, 0); 211 if (fdt_gpio_isvalid(&config.lvds_shutdown)) 212 gpio_direction_output(config.lvds_shutdown.gpio, 0); 213 if (fdt_gpio_isvalid(&config.backlight_vdd)) 214 gpio_direction_output(config.backlight_vdd.gpio, 0); 215 if (fdt_gpio_isvalid(&config.backlight_en)) 216 gpio_direction_output(config.backlight_en.gpio, 0); 217 break; 218 case STAGE_PANEL_VDD: 219 if (fdt_gpio_isvalid(&config.panel_vdd)) 220 gpio_direction_output(config.panel_vdd.gpio, 1); 221 break; 222 case STAGE_LVDS: 223 if (fdt_gpio_isvalid(&config.lvds_shutdown)) 224 gpio_set_value(config.lvds_shutdown.gpio, 1); 225 break; 226 case STAGE_BACKLIGHT_VDD: 227 if (fdt_gpio_isvalid(&config.backlight_vdd)) 228 gpio_set_value(config.backlight_vdd.gpio, 1); 229 break; 230 case STAGE_PWM: 231 /* Enable PWM at 15/16 high, 32768 Hz with divider 1 */ 232 pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_PWM); 233 pinmux_tristate_disable(PMUX_PINGRP_GPU); 234 235 pwm_enable(config.pwm_channel, 32768, 0xdf, 1); 236 break; 237 case STAGE_BACKLIGHT_EN: 238 if (fdt_gpio_isvalid(&config.backlight_en)) 239 gpio_set_value(config.backlight_en.gpio, 1); 240 break; 241 case STAGE_DONE: 242 break; 243 } 244 245 /* set up timer for next stage */ 246 timer_next = timer_get_us(); 247 if (stage < FDT_LCD_TIMINGS) 248 timer_next += config.panel_timings[stage] * 1000; 249 250 /* move to next stage */ 251 stage++; 252 return 0; 253 } 254 255 int tegra_lcd_check_next_stage(const void *blob, int wait) 256 { 257 if (stage == STAGE_DONE) 258 return 0; 259 260 do { 261 /* wait if we need to */ 262 debug("%s: stage %d\n", __func__, stage); 263 if (stage != STAGE_START) { 264 int delay = timer_next - timer_get_us(); 265 266 if (delay > 0) { 267 if (wait) 268 udelay(delay); 269 else 270 return 0; 271 } 272 } 273 274 if (handle_stage(blob)) 275 return -1; 276 } while (wait && stage != STAGE_DONE); 277 if (stage == STAGE_DONE) 278 debug("%s: LCD init complete\n", __func__); 279 280 return 0; 281 } 282 283 void lcd_enable(void) 284 { 285 /* 286 * Backlight and power init will be done separately in 287 * tegra_lcd_check_next_stage(), which should be called in 288 * board_late_init(). 289 * 290 * U-Boot code supports only colour depth, selected at compile time. 291 * The device tree setting should match this. Otherwise the display 292 * will not look right, and U-Boot may crash. 293 */ 294 if (disp_config->log2_bpp != LCD_BPP) { 295 printf("%s: Error: LCD depth configured in FDT (%d = %dbpp)" 296 " must match setting of LCD_BPP (%d)\n", __func__, 297 disp_config->log2_bpp, disp_config->bpp, LCD_BPP); 298 } 299 } 300