1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Allwinner DW HDMI bridge 4 * 5 * (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net> 6 */ 7 8 #include <common.h> 9 #include <display.h> 10 #include <dm.h> 11 #include <dw_hdmi.h> 12 #include <edid.h> 13 #include <asm/io.h> 14 #include <asm/arch/clock.h> 15 #include <asm/arch/lcdc.h> 16 17 struct sunxi_dw_hdmi_priv { 18 struct dw_hdmi hdmi; 19 int mux; 20 }; 21 22 struct sunxi_hdmi_phy { 23 u32 pol; 24 u32 res1[3]; 25 u32 read_en; 26 u32 unscramble; 27 u32 res2[2]; 28 u32 ctrl; 29 u32 unk1; 30 u32 unk2; 31 u32 pll; 32 u32 clk; 33 u32 unk3; 34 u32 status; 35 }; 36 37 #define HDMI_PHY_OFFS 0x10000 38 39 static int sunxi_dw_hdmi_get_divider(uint clock) 40 { 41 /* 42 * Due to missing documentaion of HDMI PHY, we know correct 43 * settings only for following four PHY dividers. Select one 44 * based on clock speed. 45 */ 46 if (clock <= 27000000) 47 return 11; 48 else if (clock <= 74250000) 49 return 4; 50 else if (clock <= 148500000) 51 return 2; 52 else 53 return 1; 54 } 55 56 static void sunxi_dw_hdmi_phy_init(void) 57 { 58 struct sunxi_hdmi_phy * const phy = 59 (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS); 60 unsigned long tmo; 61 u32 tmp; 62 63 /* 64 * HDMI PHY settings are taken as-is from Allwinner BSP code. 65 * There is no documentation. 66 */ 67 writel(0, &phy->ctrl); 68 setbits_le32(&phy->ctrl, BIT(0)); 69 udelay(5); 70 setbits_le32(&phy->ctrl, BIT(16)); 71 setbits_le32(&phy->ctrl, BIT(1)); 72 udelay(10); 73 setbits_le32(&phy->ctrl, BIT(2)); 74 udelay(5); 75 setbits_le32(&phy->ctrl, BIT(3)); 76 udelay(40); 77 setbits_le32(&phy->ctrl, BIT(19)); 78 udelay(100); 79 setbits_le32(&phy->ctrl, BIT(18)); 80 setbits_le32(&phy->ctrl, 7 << 4); 81 82 /* Note that Allwinner code doesn't fail in case of timeout */ 83 tmo = timer_get_us() + 2000; 84 while ((readl(&phy->status) & 0x80) == 0) { 85 if (timer_get_us() > tmo) { 86 printf("Warning: HDMI PHY init timeout!\n"); 87 break; 88 } 89 } 90 91 setbits_le32(&phy->ctrl, 0xf << 8); 92 setbits_le32(&phy->ctrl, BIT(7)); 93 94 writel(0x39dc5040, &phy->pll); 95 writel(0x80084343, &phy->clk); 96 udelay(10000); 97 writel(1, &phy->unk3); 98 setbits_le32(&phy->pll, BIT(25)); 99 udelay(100000); 100 tmp = (readl(&phy->status) & 0x1f800) >> 11; 101 setbits_le32(&phy->pll, BIT(31) | BIT(30)); 102 setbits_le32(&phy->pll, tmp); 103 writel(0x01FF0F7F, &phy->ctrl); 104 writel(0x80639000, &phy->unk1); 105 writel(0x0F81C405, &phy->unk2); 106 107 /* enable read access to HDMI controller */ 108 writel(0x54524545, &phy->read_en); 109 /* descramble register offsets */ 110 writel(0x42494E47, &phy->unscramble); 111 } 112 113 static int sunxi_dw_hdmi_get_plug_in_status(void) 114 { 115 struct sunxi_hdmi_phy * const phy = 116 (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS); 117 118 return !!(readl(&phy->status) & (1 << 19)); 119 } 120 121 static int sunxi_dw_hdmi_wait_for_hpd(void) 122 { 123 ulong start; 124 125 start = get_timer(0); 126 do { 127 if (sunxi_dw_hdmi_get_plug_in_status()) 128 return 0; 129 udelay(100); 130 } while (get_timer(start) < 300); 131 132 return -1; 133 } 134 135 static void sunxi_dw_hdmi_phy_set(uint clock) 136 { 137 struct sunxi_hdmi_phy * const phy = 138 (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS); 139 int div = sunxi_dw_hdmi_get_divider(clock); 140 u32 tmp; 141 142 /* 143 * Unfortunately, we don't know much about those magic 144 * numbers. They are taken from Allwinner BSP driver. 145 */ 146 switch (div) { 147 case 1: 148 writel(0x30dc5fc0, &phy->pll); 149 writel(0x800863C0, &phy->clk); 150 mdelay(10); 151 writel(0x00000001, &phy->unk3); 152 setbits_le32(&phy->pll, BIT(25)); 153 mdelay(200); 154 tmp = (readl(&phy->status) & 0x1f800) >> 11; 155 setbits_le32(&phy->pll, BIT(31) | BIT(30)); 156 if (tmp < 0x3d) 157 setbits_le32(&phy->pll, tmp + 2); 158 else 159 setbits_le32(&phy->pll, 0x3f); 160 mdelay(100); 161 writel(0x01FFFF7F, &phy->ctrl); 162 writel(0x8063b000, &phy->unk1); 163 writel(0x0F8246B5, &phy->unk2); 164 break; 165 case 2: 166 writel(0x39dc5040, &phy->pll); 167 writel(0x80084381, &phy->clk); 168 mdelay(10); 169 writel(0x00000001, &phy->unk3); 170 setbits_le32(&phy->pll, BIT(25)); 171 mdelay(100); 172 tmp = (readl(&phy->status) & 0x1f800) >> 11; 173 setbits_le32(&phy->pll, BIT(31) | BIT(30)); 174 setbits_le32(&phy->pll, tmp); 175 writel(0x01FFFF7F, &phy->ctrl); 176 writel(0x8063a800, &phy->unk1); 177 writel(0x0F81C485, &phy->unk2); 178 break; 179 case 4: 180 writel(0x39dc5040, &phy->pll); 181 writel(0x80084343, &phy->clk); 182 mdelay(10); 183 writel(0x00000001, &phy->unk3); 184 setbits_le32(&phy->pll, BIT(25)); 185 mdelay(100); 186 tmp = (readl(&phy->status) & 0x1f800) >> 11; 187 setbits_le32(&phy->pll, BIT(31) | BIT(30)); 188 setbits_le32(&phy->pll, tmp); 189 writel(0x01FFFF7F, &phy->ctrl); 190 writel(0x8063b000, &phy->unk1); 191 writel(0x0F81C405, &phy->unk2); 192 break; 193 case 11: 194 writel(0x39dc5040, &phy->pll); 195 writel(0x8008430a, &phy->clk); 196 mdelay(10); 197 writel(0x00000001, &phy->unk3); 198 setbits_le32(&phy->pll, BIT(25)); 199 mdelay(100); 200 tmp = (readl(&phy->status) & 0x1f800) >> 11; 201 setbits_le32(&phy->pll, BIT(31) | BIT(30)); 202 setbits_le32(&phy->pll, tmp); 203 writel(0x01FFFF7F, &phy->ctrl); 204 writel(0x8063b000, &phy->unk1); 205 writel(0x0F81C405, &phy->unk2); 206 break; 207 } 208 } 209 210 static void sunxi_dw_hdmi_pll_set(uint clk_khz) 211 { 212 int value, n, m, div = 0, diff; 213 int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF; 214 215 div = sunxi_dw_hdmi_get_divider(clk_khz * 1000); 216 217 /* 218 * Find the lowest divider resulting in a matching clock. If there 219 * is no match, pick the closest lower clock, as monitors tend to 220 * not sync to higher frequencies. 221 */ 222 for (m = 1; m <= 16; m++) { 223 n = (m * div * clk_khz) / 24000; 224 225 if ((n >= 1) && (n <= 128)) { 226 value = (24000 * n) / m / div; 227 diff = clk_khz - value; 228 if (diff < best_diff) { 229 best_diff = diff; 230 best_m = m; 231 best_n = n; 232 } 233 } 234 } 235 236 clock_set_pll3_factors(best_m, best_n); 237 debug("dotclock: %dkHz = %dkHz: (24MHz * %d) / %d / %d\n", 238 clk_khz, (clock_get_pll3() / 1000) / div, 239 best_n, best_m, div); 240 } 241 242 static void sunxi_dw_hdmi_lcdc_init(int mux, const struct display_timing *edid, 243 int bpp) 244 { 245 struct sunxi_ccm_reg * const ccm = 246 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; 247 int div = sunxi_dw_hdmi_get_divider(edid->pixelclock.typ); 248 struct sunxi_lcdc_reg *lcdc; 249 250 if (mux == 0) { 251 lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; 252 253 /* Reset off */ 254 setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0); 255 256 /* Clock on */ 257 setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0); 258 writel(CCM_LCD0_CTRL_GATE | CCM_LCD0_CTRL_M(div), 259 &ccm->lcd0_clk_cfg); 260 } else { 261 lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD1_BASE; 262 263 /* Reset off */ 264 setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD1); 265 266 /* Clock on */ 267 setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD1); 268 writel(CCM_LCD1_CTRL_GATE | CCM_LCD1_CTRL_M(div), 269 &ccm->lcd1_clk_cfg); 270 } 271 272 lcdc_init(lcdc); 273 lcdc_tcon1_mode_set(lcdc, edid, false, false); 274 lcdc_enable(lcdc, bpp); 275 } 276 277 static int sunxi_dw_hdmi_phy_cfg(struct dw_hdmi *hdmi, uint mpixelclock) 278 { 279 sunxi_dw_hdmi_pll_set(mpixelclock/1000); 280 sunxi_dw_hdmi_phy_set(mpixelclock); 281 282 return 0; 283 } 284 285 static int sunxi_dw_hdmi_read_edid(struct udevice *dev, u8 *buf, int buf_size) 286 { 287 struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev); 288 289 return dw_hdmi_read_edid(&priv->hdmi, buf, buf_size); 290 } 291 292 static int sunxi_dw_hdmi_enable(struct udevice *dev, int panel_bpp, 293 const struct display_timing *edid) 294 { 295 struct sunxi_hdmi_phy * const phy = 296 (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS); 297 struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev); 298 int ret; 299 300 ret = dw_hdmi_enable(&priv->hdmi, edid); 301 if (ret) 302 return ret; 303 304 sunxi_dw_hdmi_lcdc_init(priv->mux, edid, panel_bpp); 305 306 if (edid->flags & DISPLAY_FLAGS_VSYNC_LOW) 307 setbits_le32(&phy->pol, 0x200); 308 309 if (edid->flags & DISPLAY_FLAGS_HSYNC_LOW) 310 setbits_le32(&phy->pol, 0x100); 311 312 setbits_le32(&phy->ctrl, 0xf << 12); 313 314 /* 315 * This is last hdmi access before boot, so scramble addresses 316 * again or othwerwise BSP driver won't work. Dummy read is 317 * needed or otherwise last write doesn't get written correctly. 318 */ 319 (void)readb(SUNXI_HDMI_BASE); 320 writel(0, &phy->unscramble); 321 322 return 0; 323 } 324 325 static int sunxi_dw_hdmi_probe(struct udevice *dev) 326 { 327 struct display_plat *uc_plat = dev_get_uclass_platdata(dev); 328 struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev); 329 struct sunxi_ccm_reg * const ccm = 330 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; 331 int ret; 332 333 /* Set pll3 to 297 MHz */ 334 clock_set_pll3(297000000); 335 336 /* Set hdmi parent to pll3 */ 337 clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK, 338 CCM_HDMI_CTRL_PLL3); 339 340 /* Set ahb gating to pass */ 341 setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI); 342 setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI2); 343 setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI); 344 setbits_le32(&ccm->hdmi_slow_clk_cfg, CCM_HDMI_SLOW_CTRL_DDC_GATE); 345 346 /* Clock on */ 347 setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE); 348 349 sunxi_dw_hdmi_phy_init(); 350 351 ret = sunxi_dw_hdmi_wait_for_hpd(); 352 if (ret < 0) { 353 debug("hdmi can not get hpd signal\n"); 354 return -1; 355 } 356 357 priv->hdmi.ioaddr = SUNXI_HDMI_BASE; 358 priv->hdmi.i2c_clk_high = 0xd8; 359 priv->hdmi.i2c_clk_low = 0xfe; 360 priv->hdmi.reg_io_width = 1; 361 priv->hdmi.phy_set = sunxi_dw_hdmi_phy_cfg; 362 priv->mux = uc_plat->source_id; 363 364 dw_hdmi_init(&priv->hdmi); 365 366 return 0; 367 } 368 369 static const struct dm_display_ops sunxi_dw_hdmi_ops = { 370 .read_edid = sunxi_dw_hdmi_read_edid, 371 .enable = sunxi_dw_hdmi_enable, 372 }; 373 374 U_BOOT_DRIVER(sunxi_dw_hdmi) = { 375 .name = "sunxi_dw_hdmi", 376 .id = UCLASS_DISPLAY, 377 .ops = &sunxi_dw_hdmi_ops, 378 .probe = sunxi_dw_hdmi_probe, 379 .priv_auto_alloc_size = sizeof(struct sunxi_dw_hdmi_priv), 380 }; 381 382 U_BOOT_DEVICE(sunxi_dw_hdmi) = { 383 .name = "sunxi_dw_hdmi" 384 }; 385