1 /* 2 * Copyright (c) 2015 Google, Inc 3 * Copyright 2014 Rockchip Inc. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <clk.h> 10 #include <display.h> 11 #include <dm.h> 12 #include <edid.h> 13 #include <regmap.h> 14 #include <syscon.h> 15 #include <video.h> 16 #include <asm/gpio.h> 17 #include <asm/hardware.h> 18 #include <asm/io.h> 19 #include <asm/arch/clock.h> 20 #include <asm/arch/cru_rk3288.h> 21 #include <asm/arch/grf_rk3288.h> 22 #include <asm/arch/edp_rk3288.h> 23 #include <asm/arch/vop_rk3288.h> 24 #include <dm/device-internal.h> 25 #include <dm/uclass-internal.h> 26 #include <dt-bindings/clock/rk3288-cru.h> 27 #include <power/regulator.h> 28 29 DECLARE_GLOBAL_DATA_PTR; 30 31 struct rk_vop_priv { 32 struct rk3288_vop *regs; 33 struct rk3288_grf *grf; 34 }; 35 36 void rkvop_enable(struct rk3288_vop *regs, ulong fbbase, 37 int fb_bits_per_pixel, const struct display_timing *edid) 38 { 39 u32 lb_mode; 40 u32 rgb_mode; 41 u32 hactive = edid->hactive.typ; 42 u32 vactive = edid->vactive.typ; 43 44 writel(V_ACT_WIDTH(hactive - 1) | V_ACT_HEIGHT(vactive - 1), 45 ®s->win0_act_info); 46 47 writel(V_DSP_XST(edid->hsync_len.typ + edid->hback_porch.typ) | 48 V_DSP_YST(edid->vsync_len.typ + edid->vback_porch.typ), 49 ®s->win0_dsp_st); 50 51 writel(V_DSP_WIDTH(hactive - 1) | 52 V_DSP_HEIGHT(vactive - 1), 53 ®s->win0_dsp_info); 54 55 clrsetbits_le32(®s->win0_color_key, M_WIN0_KEY_EN | M_WIN0_KEY_COLOR, 56 V_WIN0_KEY_EN(0) | V_WIN0_KEY_COLOR(0)); 57 58 switch (fb_bits_per_pixel) { 59 case 16: 60 rgb_mode = RGB565; 61 writel(V_RGB565_VIRWIDTH(hactive), ®s->win0_vir); 62 break; 63 case 24: 64 rgb_mode = RGB888; 65 writel(V_RGB888_VIRWIDTH(hactive), ®s->win0_vir); 66 break; 67 case 32: 68 default: 69 rgb_mode = ARGB8888; 70 writel(V_ARGB888_VIRWIDTH(hactive), ®s->win0_vir); 71 break; 72 } 73 74 if (hactive > 2560) 75 lb_mode = LB_RGB_3840X2; 76 else if (hactive > 1920) 77 lb_mode = LB_RGB_2560X4; 78 else if (hactive > 1280) 79 lb_mode = LB_RGB_1920X5; 80 else 81 lb_mode = LB_RGB_1280X8; 82 83 clrsetbits_le32(®s->win0_ctrl0, 84 M_WIN0_LB_MODE | M_WIN0_DATA_FMT | M_WIN0_EN, 85 V_WIN0_LB_MODE(lb_mode) | V_WIN0_DATA_FMT(rgb_mode) | 86 V_WIN0_EN(1)); 87 88 writel(fbbase, ®s->win0_yrgb_mst); 89 writel(0x01, ®s->reg_cfg_done); /* enable reg config */ 90 } 91 92 void rkvop_mode_set(struct rk3288_vop *regs, 93 const struct display_timing *edid, enum vop_modes mode) 94 { 95 u32 hactive = edid->hactive.typ; 96 u32 vactive = edid->vactive.typ; 97 u32 hsync_len = edid->hsync_len.typ; 98 u32 hback_porch = edid->hback_porch.typ; 99 u32 vsync_len = edid->vsync_len.typ; 100 u32 vback_porch = edid->vback_porch.typ; 101 u32 hfront_porch = edid->hfront_porch.typ; 102 u32 vfront_porch = edid->vfront_porch.typ; 103 uint flags; 104 int mode_flags; 105 106 switch (mode) { 107 case VOP_MODE_HDMI: 108 clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN, 109 V_HDMI_OUT_EN(1)); 110 break; 111 case VOP_MODE_EDP: 112 default: 113 clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN, 114 V_EDP_OUT_EN(1)); 115 break; 116 case VOP_MODE_LVDS: 117 clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN, 118 V_RGB_OUT_EN(1)); 119 break; 120 case VOP_MODE_MIPI: 121 clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN, 122 V_MIPI_OUT_EN(1)); 123 break; 124 } 125 126 if (mode == VOP_MODE_HDMI || mode == VOP_MODE_EDP) 127 /* RGBaaa */ 128 mode_flags = 15; 129 else 130 /* RGB888 */ 131 mode_flags = 0; 132 133 flags = V_DSP_OUT_MODE(mode_flags) | 134 V_DSP_HSYNC_POL(!!(edid->flags & DISPLAY_FLAGS_HSYNC_HIGH)) | 135 V_DSP_VSYNC_POL(!!(edid->flags & DISPLAY_FLAGS_VSYNC_HIGH)); 136 137 clrsetbits_le32(®s->dsp_ctrl0, 138 M_DSP_OUT_MODE | M_DSP_VSYNC_POL | M_DSP_HSYNC_POL, 139 flags); 140 141 writel(V_HSYNC(hsync_len) | 142 V_HORPRD(hsync_len + hback_porch + hactive + hfront_porch), 143 ®s->dsp_htotal_hs_end); 144 145 writel(V_HEAP(hsync_len + hback_porch + hactive) | 146 V_HASP(hsync_len + hback_porch), 147 ®s->dsp_hact_st_end); 148 149 writel(V_VSYNC(vsync_len) | 150 V_VERPRD(vsync_len + vback_porch + vactive + vfront_porch), 151 ®s->dsp_vtotal_vs_end); 152 153 writel(V_VAEP(vsync_len + vback_porch + vactive)| 154 V_VASP(vsync_len + vback_porch), 155 ®s->dsp_vact_st_end); 156 157 writel(V_HEAP(hsync_len + hback_porch + hactive) | 158 V_HASP(hsync_len + hback_porch), 159 ®s->post_dsp_hact_info); 160 161 writel(V_VAEP(vsync_len + vback_porch + vactive)| 162 V_VASP(vsync_len + vback_porch), 163 ®s->post_dsp_vact_info); 164 165 writel(0x01, ®s->reg_cfg_done); /* enable reg config */ 166 } 167 168 /** 169 * rk_display_init() - Try to enable the given display device 170 * 171 * This function performs many steps: 172 * - Finds the display device being referenced by @ep_node 173 * - Puts the VOP's ID into its uclass platform data 174 * - Probes the device to set it up 175 * - Reads the EDID timing information 176 * - Sets up the VOP clocks, etc. for the selected pixel clock and display mode 177 * - Enables the display (the display device handles this and will do different 178 * things depending on the display type) 179 * - Tells the uclass about the display resolution so that the console will 180 * appear correctly 181 * 182 * @dev: VOP device that we want to connect to the display 183 * @fbbase: Frame buffer address 184 * @ep_node: Device tree node to process - this is the offset of an endpoint 185 * node within the VOP's 'port' list. 186 * @return 0 if OK, -ve if something went wrong 187 */ 188 int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node) 189 { 190 struct video_priv *uc_priv = dev_get_uclass_priv(dev); 191 const void *blob = gd->fdt_blob; 192 struct rk_vop_priv *priv = dev_get_priv(dev); 193 int vop_id, remote_vop_id; 194 struct rk3288_vop *regs = priv->regs; 195 struct display_timing timing; 196 struct udevice *disp; 197 int ret, remote, i, offset; 198 struct display_plat *disp_uc_plat; 199 struct clk clk; 200 enum video_log2_bpp l2bpp; 201 202 vop_id = fdtdec_get_int(blob, ep_node, "reg", -1); 203 debug("vop_id=%d\n", vop_id); 204 remote = fdtdec_lookup_phandle(blob, ep_node, "remote-endpoint"); 205 if (remote < 0) 206 return -EINVAL; 207 remote_vop_id = fdtdec_get_int(blob, remote, "reg", -1); 208 debug("remote vop_id=%d\n", remote_vop_id); 209 210 for (i = 0, offset = remote; i < 3 && offset > 0; i++) 211 offset = fdt_parent_offset(blob, offset); 212 if (offset < 0) { 213 debug("%s: Invalid remote-endpoint position\n", dev->name); 214 return -EINVAL; 215 } 216 217 ret = uclass_find_device_by_of_offset(UCLASS_DISPLAY, offset, &disp); 218 if (ret) { 219 debug("%s: device '%s' display not found (ret=%d)\n", __func__, 220 dev->name, ret); 221 return ret; 222 } 223 224 disp_uc_plat = dev_get_uclass_platdata(disp); 225 debug("Found device '%s', disp_uc_priv=%p\n", disp->name, disp_uc_plat); 226 if (display_in_use(disp)) { 227 debug(" - device in use\n"); 228 return -EBUSY; 229 } 230 231 disp_uc_plat->source_id = remote_vop_id; 232 disp_uc_plat->src_dev = dev; 233 234 ret = device_probe(disp); 235 if (ret) { 236 debug("%s: device '%s' display won't probe (ret=%d)\n", 237 __func__, dev->name, ret); 238 return ret; 239 } 240 241 ret = display_read_timing(disp, &timing); 242 if (ret) { 243 debug("%s: Failed to read timings\n", __func__); 244 return ret; 245 } 246 247 ret = clk_get_by_index(dev, 1, &clk); 248 if (!ret) 249 ret = clk_set_rate(&clk, timing.pixelclock.typ); 250 if (IS_ERR_VALUE(ret)) { 251 debug("%s: Failed to set pixel clock: ret=%d\n", __func__, ret); 252 return ret; 253 } 254 255 /* Set bitwidth for vop display according to vop mode */ 256 switch (vop_id) { 257 case VOP_MODE_EDP: 258 case VOP_MODE_HDMI: 259 case VOP_MODE_LVDS: 260 l2bpp = VIDEO_BPP16; 261 break; 262 case VOP_MODE_MIPI: 263 l2bpp = VIDEO_BPP32; 264 break; 265 default: 266 l2bpp = VIDEO_BPP16; 267 } 268 rkvop_mode_set(regs, &timing, vop_id); 269 270 rkvop_enable(regs, fbbase, 1 << l2bpp, &timing); 271 272 ret = display_enable(disp, 1 << l2bpp, &timing); 273 if (ret) 274 return ret; 275 276 uc_priv->xsize = timing.hactive.typ; 277 uc_priv->ysize = timing.vactive.typ; 278 uc_priv->bpix = l2bpp; 279 debug("fb=%lx, size=%d %d\n", fbbase, uc_priv->xsize, uc_priv->ysize); 280 281 return 0; 282 } 283 284 static int rk_vop_probe(struct udevice *dev) 285 { 286 struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); 287 const void *blob = gd->fdt_blob; 288 struct rk_vop_priv *priv = dev_get_priv(dev); 289 struct udevice *reg; 290 int ret, port, node; 291 292 /* Before relocation we don't need to do anything */ 293 if (!(gd->flags & GD_FLG_RELOC)) 294 return 0; 295 296 priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); 297 priv->regs = (struct rk3288_vop *)devfdt_get_addr(dev); 298 299 /* lcdc(vop) iodomain select 1.8V */ 300 rk_setreg(&priv->grf->io_vsel, 1 << 0); 301 302 /* 303 * Try some common regulators. We should really get these from the 304 * device tree somehow. 305 */ 306 ret = regulator_autoset_by_name("vcc18_lcd", ®); 307 if (ret) 308 debug("%s: Cannot autoset regulator vcc18_lcd\n", __func__); 309 ret = regulator_autoset_by_name("VCC18_LCD", ®); 310 if (ret) 311 debug("%s: Cannot autoset regulator VCC18_LCD\n", __func__); 312 ret = regulator_autoset_by_name("vdd10_lcd_pwren_h", ®); 313 if (ret) { 314 debug("%s: Cannot autoset regulator vdd10_lcd_pwren_h\n", 315 __func__); 316 } 317 ret = regulator_autoset_by_name("vdd10_lcd", ®); 318 if (ret) { 319 debug("%s: Cannot autoset regulator vdd10_lcd\n", 320 __func__); 321 } 322 ret = regulator_autoset_by_name("VDD10_LCD", ®); 323 if (ret) { 324 debug("%s: Cannot autoset regulator VDD10_LCD\n", 325 __func__); 326 } 327 ret = regulator_autoset_by_name("vcc33_lcd", ®); 328 if (ret) 329 debug("%s: Cannot autoset regulator vcc33_lcd\n", __func__); 330 331 /* 332 * Try all the ports until we find one that works. In practice this 333 * tries EDP first if available, then HDMI. 334 * 335 * Note that rockchip_vop_set_clk() always uses NPLL as the source 336 * clock so it is currently not possible to use more than one display 337 * device simultaneously. 338 */ 339 port = fdt_subnode_offset(blob, dev_of_offset(dev), "port"); 340 if (port < 0) 341 return -EINVAL; 342 for (node = fdt_first_subnode(blob, port); 343 node > 0; 344 node = fdt_next_subnode(blob, node)) { 345 ret = rk_display_init(dev, plat->base, node); 346 if (ret) 347 debug("Device failed: ret=%d\n", ret); 348 if (!ret) 349 break; 350 } 351 video_set_flush_dcache(dev, 1); 352 353 return ret; 354 } 355 356 static int rk_vop_bind(struct udevice *dev) 357 { 358 struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); 359 360 plat->size = 1920 * 1200 * 4; 361 362 return 0; 363 } 364 365 static const struct video_ops rk_vop_ops = { 366 }; 367 368 static const struct udevice_id rk_vop_ids[] = { 369 { .compatible = "rockchip,rk3399-vop-big" }, 370 { .compatible = "rockchip,rk3399-vop-lit" }, 371 { .compatible = "rockchip,rk3288-vop" }, 372 { } 373 }; 374 375 U_BOOT_DRIVER(rk_vop) = { 376 .name = "rk_vop", 377 .id = UCLASS_VIDEO, 378 .of_match = rk_vop_ids, 379 .ops = &rk_vop_ops, 380 .bind = rk_vop_bind, 381 .probe = rk_vop_probe, 382 .priv_auto_alloc_size = sizeof(struct rk_vop_priv), 383 }; 384