1 /* 2 * Copyright (c) 2015 Google, Inc 3 * Copyright 2014 Rockchip Inc. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <clk.h> 10 #include <display.h> 11 #include <dm.h> 12 #include <edid.h> 13 #include <panel.h> 14 #include <regmap.h> 15 #include <syscon.h> 16 #include <asm/gpio.h> 17 #include <asm/io.h> 18 #include <asm/arch/clock.h> 19 #include <asm/arch/edp_rk3288.h> 20 #include <asm/arch/grf_rk3288.h> 21 #include <dt-bindings/clock/rk3288-cru.h> 22 23 DECLARE_GLOBAL_DATA_PTR; 24 25 #define MAX_CR_LOOP 5 26 #define MAX_EQ_LOOP 5 27 #define DP_LINK_STATUS_SIZE 6 28 29 static const char * const voltage_names[] = { 30 "0.4V", "0.6V", "0.8V", "1.2V" 31 }; 32 static const char * const pre_emph_names[] = { 33 "0dB", "3.5dB", "6dB", "9.5dB" 34 }; 35 36 #define DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_1200 37 #define DP_PRE_EMPHASIS_MAX DP_TRAIN_PRE_EMPHASIS_9_5 38 39 struct rk_edp_priv { 40 struct rk3288_edp *regs; 41 struct rk3288_grf *grf; 42 struct udevice *panel; 43 struct link_train link_train; 44 u8 train_set[4]; 45 }; 46 47 static void rk_edp_init_refclk(struct rk3288_edp *regs) 48 { 49 writel(SEL_24M, ®s->analog_ctl_2); 50 writel(REF_CLK_24M, ®s->pll_reg_1); 51 52 writel(LDO_OUTPUT_V_SEL_145 | KVCO_DEFALUT | CHG_PUMP_CUR_SEL_5US | 53 V2L_CUR_SEL_1MA, ®s->pll_reg_2); 54 55 writel(LOCK_DET_CNT_SEL_256 | LOOP_FILTER_RESET | PALL_SSC_RESET | 56 LOCK_DET_BYPASS | PLL_LOCK_DET_MODE | PLL_LOCK_DET_FORCE, 57 ®s->pll_reg_3); 58 59 writel(REGULATOR_V_SEL_950MV | STANDBY_CUR_SEL | 60 CHG_PUMP_INOUT_CTRL_1200MV | CHG_PUMP_INPUT_CTRL_OP, 61 ®s->pll_reg_5); 62 63 writel(SSC_OFFSET | SSC_MODE | SSC_DEPTH, ®s->ssc_reg); 64 65 writel(TX_SWING_PRE_EMP_MODE | PRE_DRIVER_PW_CTRL1 | 66 LP_MODE_CLK_REGULATOR | RESISTOR_MSB_CTRL | RESISTOR_CTRL, 67 ®s->tx_common); 68 69 writel(DP_AUX_COMMON_MODE | DP_AUX_EN | AUX_TERM_50OHM, 70 ®s->dp_aux); 71 72 writel(DP_BG_OUT_SEL | DP_DB_CUR_CTRL | DP_BG_SEL | DP_RESISTOR_TUNE_BG, 73 ®s->dp_bias); 74 75 writel(CH1_CH3_SWING_EMP_CTRL | CH0_CH2_SWING_EMP_CTRL, 76 ®s->dp_reserv2); 77 } 78 79 static void rk_edp_init_interrupt(struct rk3288_edp *regs) 80 { 81 /* Set interrupt pin assertion polarity as high */ 82 writel(INT_POL, ®s->int_ctl); 83 84 /* Clear pending registers */ 85 writel(0xff, ®s->common_int_sta_1); 86 writel(0x4f, ®s->common_int_sta_2); 87 writel(0xff, ®s->common_int_sta_3); 88 writel(0x27, ®s->common_int_sta_4); 89 writel(0x7f, ®s->dp_int_sta); 90 91 /* 0:mask,1: unmask */ 92 writel(0x00, ®s->common_int_mask_1); 93 writel(0x00, ®s->common_int_mask_2); 94 writel(0x00, ®s->common_int_mask_3); 95 writel(0x00, ®s->common_int_mask_4); 96 writel(0x00, ®s->int_sta_mask); 97 } 98 99 static void rk_edp_enable_sw_function(struct rk3288_edp *regs) 100 { 101 clrbits_le32(®s->func_en_1, SW_FUNC_EN_N); 102 } 103 104 static bool rk_edp_get_pll_locked(struct rk3288_edp *regs) 105 { 106 u32 val; 107 108 val = readl(®s->dp_debug_ctl); 109 110 return val & PLL_LOCK; 111 } 112 113 static int rk_edp_init_analog_func(struct rk3288_edp *regs) 114 { 115 ulong start; 116 117 writel(0x00, ®s->dp_pd); 118 writel(PLL_LOCK_CHG, ®s->common_int_sta_1); 119 120 clrbits_le32(®s->dp_debug_ctl, F_PLL_LOCK | PLL_LOCK_CTRL); 121 122 start = get_timer(0); 123 while (!rk_edp_get_pll_locked(regs)) { 124 if (get_timer(start) > PLL_LOCK_TIMEOUT) { 125 printf("%s: PLL is not locked\n", __func__); 126 return -ETIMEDOUT; 127 } 128 } 129 130 /* Enable Serdes FIFO function and Link symbol clock domain module */ 131 clrbits_le32(®s->func_en_2, SERDES_FIFO_FUNC_EN_N | 132 LS_CLK_DOMAIN_FUNC_EN_N | AUX_FUNC_EN_N | 133 SSC_FUNC_EN_N); 134 135 return 0; 136 } 137 138 static void rk_edp_init_aux(struct rk3288_edp *regs) 139 { 140 /* Clear inerrupts related to AUX channel */ 141 writel(AUX_FUNC_EN_N, ®s->dp_int_sta); 142 143 /* Disable AUX channel module */ 144 setbits_le32(®s->func_en_2, AUX_FUNC_EN_N); 145 146 /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ 147 writel(DEFER_CTRL_EN | DEFER_COUNT(1), ®s->aux_ch_defer_dtl); 148 149 /* Enable AUX channel module */ 150 clrbits_le32(®s->func_en_2, AUX_FUNC_EN_N); 151 } 152 153 static int rk_edp_aux_enable(struct rk3288_edp *regs) 154 { 155 ulong start; 156 157 setbits_le32(®s->aux_ch_ctl_2, AUX_EN); 158 start = get_timer(0); 159 do { 160 if (!(readl(®s->aux_ch_ctl_2) & AUX_EN)) 161 return 0; 162 } while (get_timer(start) < 20); 163 164 return -ETIMEDOUT; 165 } 166 167 static int rk_edp_is_aux_reply(struct rk3288_edp *regs) 168 { 169 ulong start; 170 171 start = get_timer(0); 172 while (!(readl(®s->dp_int_sta) & RPLY_RECEIV)) { 173 if (get_timer(start) > 10) 174 return -ETIMEDOUT; 175 } 176 177 writel(RPLY_RECEIV, ®s->dp_int_sta); 178 179 return 0; 180 } 181 182 static int rk_edp_start_aux_transaction(struct rk3288_edp *regs) 183 { 184 int val, ret; 185 186 /* Enable AUX CH operation */ 187 ret = rk_edp_aux_enable(regs); 188 if (ret) { 189 debug("AUX CH enable timeout!\n"); 190 return ret; 191 } 192 193 /* Is AUX CH command reply received? */ 194 if (rk_edp_is_aux_reply(regs)) { 195 debug("AUX CH command reply failed!\n"); 196 return ret; 197 } 198 199 /* Clear interrupt source for AUX CH access error */ 200 val = readl(®s->dp_int_sta); 201 if (val & AUX_ERR) { 202 writel(AUX_ERR, ®s->dp_int_sta); 203 return -EIO; 204 } 205 206 /* Check AUX CH error access status */ 207 val = readl(®s->dp_int_sta); 208 if (val & AUX_STATUS_MASK) { 209 debug("AUX CH error happens: %d\n\n", val & AUX_STATUS_MASK); 210 return -EIO; 211 } 212 213 return 0; 214 } 215 216 static int rk_edp_dpcd_transfer(struct rk3288_edp *regs, 217 unsigned int val_addr, u8 *in_data, 218 unsigned int length, 219 enum dpcd_request request) 220 { 221 int val; 222 int i, try_times; 223 u8 *data; 224 int ret = 0; 225 u32 len = 0; 226 227 while (length) { 228 len = min(length, 16U); 229 for (try_times = 0; try_times < 10; try_times++) { 230 data = in_data; 231 /* Clear AUX CH data buffer */ 232 writel(BUF_CLR, ®s->buf_data_ctl); 233 234 /* Select DPCD device address */ 235 writel(AUX_ADDR_7_0(val_addr), ®s->aux_addr_7_0); 236 writel(AUX_ADDR_15_8(val_addr), ®s->aux_addr_15_8); 237 writel(AUX_ADDR_19_16(val_addr), ®s->aux_addr_19_16); 238 239 /* 240 * Set DisplayPort transaction and read 1 byte 241 * If bit 3 is 1, DisplayPort transaction. 242 * If Bit 3 is 0, I2C transaction. 243 */ 244 if (request == DPCD_WRITE) { 245 val = AUX_LENGTH(len) | 246 AUX_TX_COMM_DP_TRANSACTION | 247 AUX_TX_COMM_WRITE; 248 for (i = 0; i < len; i++) 249 writel(*data++, ®s->buf_data[i]); 250 } else 251 val = AUX_LENGTH(len) | 252 AUX_TX_COMM_DP_TRANSACTION | 253 AUX_TX_COMM_READ; 254 255 writel(val, ®s->aux_ch_ctl_1); 256 257 /* Start AUX transaction */ 258 ret = rk_edp_start_aux_transaction(regs); 259 if (ret == 0) 260 break; 261 else 262 printf("read dpcd Aux Transaction fail!\n"); 263 } 264 265 if (ret) 266 return ret; 267 268 if (request == DPCD_READ) { 269 for (i = 0; i < len; i++) 270 *data++ = (u8)readl(®s->buf_data[i]); 271 } 272 273 length -= len; 274 val_addr += len; 275 in_data += len; 276 } 277 278 return 0; 279 } 280 281 static int rk_edp_dpcd_read(struct rk3288_edp *regs, u32 addr, u8 *values, 282 size_t size) 283 { 284 return rk_edp_dpcd_transfer(regs, addr, values, size, DPCD_READ); 285 } 286 287 static int rk_edp_dpcd_write(struct rk3288_edp *regs, u32 addr, u8 *values, 288 size_t size) 289 { 290 return rk_edp_dpcd_transfer(regs, addr, values, size, DPCD_WRITE); 291 } 292 293 294 static int rk_edp_link_power_up(struct rk_edp_priv *edp) 295 { 296 u8 value; 297 int ret; 298 299 /* DP_SET_POWER register is only available on DPCD v1.1 and later */ 300 if (edp->link_train.revision < 0x11) 301 return 0; 302 303 ret = rk_edp_dpcd_read(edp->regs, DPCD_LINK_POWER_STATE, &value, 1); 304 if (ret) 305 return ret; 306 307 value &= ~DP_SET_POWER_MASK; 308 value |= DP_SET_POWER_D0; 309 310 ret = rk_edp_dpcd_write(edp->regs, DPCD_LINK_POWER_STATE, &value, 1); 311 if (ret) 312 return ret; 313 314 /* 315 * According to the DP 1.1 specification, a "Sink Device must exit the 316 * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink 317 * Control Field" (register 0x600). 318 */ 319 mdelay(1); 320 321 return 0; 322 } 323 324 static int rk_edp_link_configure(struct rk_edp_priv *edp) 325 { 326 u8 values[2]; 327 328 values[0] = edp->link_train.link_rate; 329 values[1] = edp->link_train.lane_count; 330 331 return rk_edp_dpcd_write(edp->regs, DPCD_LINK_BW_SET, values, 332 sizeof(values)); 333 } 334 335 static void rk_edp_set_link_training(struct rk_edp_priv *edp, 336 const u8 *training_values) 337 { 338 int i; 339 340 for (i = 0; i < edp->link_train.lane_count; i++) 341 writel(training_values[i], &edp->regs->ln_link_trn_ctl[i]); 342 } 343 344 static u8 edp_link_status(const u8 *link_status, int r) 345 { 346 return link_status[r - DPCD_LANE0_1_STATUS]; 347 } 348 349 static int rk_edp_dpcd_read_link_status(struct rk_edp_priv *edp, 350 u8 *link_status) 351 { 352 return rk_edp_dpcd_read(edp->regs, DPCD_LANE0_1_STATUS, link_status, 353 DP_LINK_STATUS_SIZE); 354 } 355 356 static u8 edp_get_lane_status(const u8 *link_status, int lane) 357 { 358 int i = DPCD_LANE0_1_STATUS + (lane >> 1); 359 int s = (lane & 1) * 4; 360 u8 l = edp_link_status(link_status, i); 361 362 return (l >> s) & 0xf; 363 } 364 365 static int rk_edp_clock_recovery(const u8 *link_status, int lane_count) 366 { 367 int lane; 368 u8 lane_status; 369 370 for (lane = 0; lane < lane_count; lane++) { 371 lane_status = edp_get_lane_status(link_status, lane); 372 if ((lane_status & DP_LANE_CR_DONE) == 0) 373 return -EIO; 374 } 375 376 return 0; 377 } 378 379 static int rk_edp_channel_eq(const u8 *link_status, int lane_count) 380 { 381 u8 lane_align; 382 u8 lane_status; 383 int lane; 384 385 lane_align = edp_link_status(link_status, 386 DPCD_LANE_ALIGN_STATUS_UPDATED); 387 if (!(lane_align & DP_INTERLANE_ALIGN_DONE)) 388 return -EIO; 389 for (lane = 0; lane < lane_count; lane++) { 390 lane_status = edp_get_lane_status(link_status, lane); 391 if ((lane_status & DP_CHANNEL_EQ_BITS) != DP_CHANNEL_EQ_BITS) 392 return -EIO; 393 } 394 395 return 0; 396 } 397 398 static uint rk_edp_get_adjust_request_voltage(const u8 *link_status, int lane) 399 { 400 int i = DPCD_ADJUST_REQUEST_LANE0_1 + (lane >> 1); 401 int s = ((lane & 1) ? 402 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : 403 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); 404 u8 l = edp_link_status(link_status, i); 405 406 return ((l >> s) & 0x3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; 407 } 408 409 static uint rk_edp_get_adjust_request_pre_emphasis(const u8 *link_status, 410 int lane) 411 { 412 int i = DPCD_ADJUST_REQUEST_LANE0_1 + (lane >> 1); 413 int s = ((lane & 1) ? 414 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : 415 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); 416 u8 l = edp_link_status(link_status, i); 417 418 return ((l >> s) & 0x3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; 419 } 420 421 static void edp_get_adjust_train(const u8 *link_status, int lane_count, 422 u8 train_set[]) 423 { 424 uint v = 0; 425 uint p = 0; 426 int lane; 427 428 for (lane = 0; lane < lane_count; lane++) { 429 uint this_v, this_p; 430 431 this_v = rk_edp_get_adjust_request_voltage(link_status, lane); 432 this_p = rk_edp_get_adjust_request_pre_emphasis(link_status, 433 lane); 434 435 debug("requested signal parameters: lane %d voltage %s pre_emph %s\n", 436 lane, 437 voltage_names[this_v >> DP_TRAIN_VOLTAGE_SWING_SHIFT], 438 pre_emph_names[this_p >> DP_TRAIN_PRE_EMPHASIS_SHIFT]); 439 440 if (this_v > v) 441 v = this_v; 442 if (this_p > p) 443 p = this_p; 444 } 445 446 if (v >= DP_VOLTAGE_MAX) 447 v |= DP_TRAIN_MAX_SWING_REACHED; 448 449 if (p >= DP_PRE_EMPHASIS_MAX) 450 p |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; 451 452 debug("using signal parameters: voltage %s pre_emph %s\n", 453 voltage_names[(v & DP_TRAIN_VOLTAGE_SWING_MASK) 454 >> DP_TRAIN_VOLTAGE_SWING_SHIFT], 455 pre_emph_names[(p & DP_TRAIN_PRE_EMPHASIS_MASK) 456 >> DP_TRAIN_PRE_EMPHASIS_SHIFT]); 457 458 for (lane = 0; lane < 4; lane++) 459 train_set[lane] = v | p; 460 } 461 462 static int rk_edp_link_train_cr(struct rk_edp_priv *edp) 463 { 464 struct rk3288_edp *regs = edp->regs; 465 int clock_recovery; 466 uint voltage, tries = 0; 467 u8 status[DP_LINK_STATUS_SIZE]; 468 int i, ret; 469 u8 value; 470 471 value = DP_TRAINING_PATTERN_1; 472 writel(value, ®s->dp_training_ptn_set); 473 ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_PATTERN_SET, &value, 1); 474 if (ret) 475 return ret; 476 memset(edp->train_set, '\0', sizeof(edp->train_set)); 477 478 /* clock recovery loop */ 479 clock_recovery = 0; 480 tries = 0; 481 voltage = 0xff; 482 483 while (1) { 484 rk_edp_set_link_training(edp, edp->train_set); 485 ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_LANE0_SET, 486 edp->train_set, 487 edp->link_train.lane_count); 488 if (ret) 489 return ret; 490 491 mdelay(1); 492 493 ret = rk_edp_dpcd_read_link_status(edp, status); 494 if (ret) { 495 printf("displayport link status failed, ret=%d\n", ret); 496 break; 497 } 498 499 clock_recovery = rk_edp_clock_recovery(status, 500 edp->link_train.lane_count); 501 if (!clock_recovery) 502 break; 503 504 for (i = 0; i < edp->link_train.lane_count; i++) { 505 if ((edp->train_set[i] & 506 DP_TRAIN_MAX_SWING_REACHED) == 0) 507 break; 508 } 509 if (i == edp->link_train.lane_count) { 510 printf("clock recovery reached max voltage\n"); 511 break; 512 } 513 514 if ((edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == 515 voltage) { 516 if (++tries == MAX_CR_LOOP) { 517 printf("clock recovery tried 5 times\n"); 518 break; 519 } 520 } else { 521 tries = 0; 522 } 523 524 voltage = edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; 525 526 /* Compute new train_set as requested by sink */ 527 edp_get_adjust_train(status, edp->link_train.lane_count, 528 edp->train_set); 529 } 530 if (clock_recovery) { 531 printf("clock recovery failed: %d\n", clock_recovery); 532 return clock_recovery; 533 } else { 534 debug("clock recovery at voltage %d pre-emphasis %d\n", 535 edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK, 536 (edp->train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK) >> 537 DP_TRAIN_PRE_EMPHASIS_SHIFT); 538 return 0; 539 } 540 } 541 542 static int rk_edp_link_train_ce(struct rk_edp_priv *edp) 543 { 544 struct rk3288_edp *regs = edp->regs; 545 int channel_eq; 546 u8 value; 547 int tries; 548 u8 status[DP_LINK_STATUS_SIZE]; 549 int ret; 550 551 value = DP_TRAINING_PATTERN_2; 552 writel(value, ®s->dp_training_ptn_set); 553 ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_PATTERN_SET, &value, 1); 554 if (ret) 555 return ret; 556 557 /* channel equalization loop */ 558 channel_eq = 0; 559 for (tries = 0; tries < 5; tries++) { 560 rk_edp_set_link_training(edp, edp->train_set); 561 udelay(400); 562 563 if (rk_edp_dpcd_read_link_status(edp, status) < 0) { 564 printf("displayport link status failed\n"); 565 return -1; 566 } 567 568 channel_eq = rk_edp_channel_eq(status, 569 edp->link_train.lane_count); 570 if (!channel_eq) 571 break; 572 edp_get_adjust_train(status, edp->link_train.lane_count, 573 edp->train_set); 574 } 575 576 if (channel_eq) { 577 printf("channel eq failed, ret=%d\n", channel_eq); 578 return channel_eq; 579 } 580 581 debug("channel eq at voltage %d pre-emphasis %d\n", 582 edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK, 583 (edp->train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK) 584 >> DP_TRAIN_PRE_EMPHASIS_SHIFT); 585 586 return 0; 587 } 588 589 static int rk_edp_init_training(struct rk_edp_priv *edp) 590 { 591 u8 values[3]; 592 int ret; 593 594 ret = rk_edp_dpcd_read(edp->regs, DPCD_DPCD_REV, values, 595 sizeof(values)); 596 if (ret < 0) 597 return ret; 598 599 edp->link_train.revision = values[0]; 600 edp->link_train.link_rate = values[1]; 601 edp->link_train.lane_count = values[2] & DP_MAX_LANE_COUNT_MASK; 602 603 debug("max link rate:%d.%dGps max number of lanes:%d\n", 604 edp->link_train.link_rate * 27 / 100, 605 edp->link_train.link_rate * 27 % 100, 606 edp->link_train.lane_count); 607 608 if ((edp->link_train.link_rate != LINK_RATE_1_62GBPS) && 609 (edp->link_train.link_rate != LINK_RATE_2_70GBPS)) { 610 debug("Rx Max Link Rate is abnormal :%x\n", 611 edp->link_train.link_rate); 612 return -EPERM; 613 } 614 615 if (edp->link_train.lane_count == 0) { 616 debug("Rx Max Lane count is abnormal :%x\n", 617 edp->link_train.lane_count); 618 return -EPERM; 619 } 620 621 ret = rk_edp_link_power_up(edp); 622 if (ret) 623 return ret; 624 625 return rk_edp_link_configure(edp); 626 } 627 628 static int rk_edp_hw_link_training(struct rk_edp_priv *edp) 629 { 630 ulong start; 631 u32 val; 632 int ret; 633 634 /* Set link rate and count as you want to establish */ 635 writel(edp->link_train.link_rate, &edp->regs->link_bw_set); 636 writel(edp->link_train.lane_count, &edp->regs->lane_count_set); 637 638 ret = rk_edp_link_train_cr(edp); 639 if (ret) 640 return ret; 641 ret = rk_edp_link_train_ce(edp); 642 if (ret) 643 return ret; 644 645 writel(HW_LT_EN, &edp->regs->dp_hw_link_training); 646 start = get_timer(0); 647 do { 648 val = readl(&edp->regs->dp_hw_link_training); 649 if (!(val & HW_LT_EN)) 650 break; 651 } while (get_timer(start) < 10); 652 653 if (val & HW_LT_ERR_CODE_MASK) { 654 printf("edp hw link training error: %d\n", 655 val >> HW_LT_ERR_CODE_SHIFT); 656 return -EIO; 657 } 658 659 return 0; 660 } 661 662 static int rk_edp_select_i2c_device(struct rk3288_edp *regs, 663 unsigned int device_addr, 664 unsigned int val_addr) 665 { 666 int ret; 667 668 /* Set EDID device address */ 669 writel(device_addr, ®s->aux_addr_7_0); 670 writel(0x0, ®s->aux_addr_15_8); 671 writel(0x0, ®s->aux_addr_19_16); 672 673 /* Set offset from base address of EDID device */ 674 writel(val_addr, ®s->buf_data[0]); 675 676 /* 677 * Set I2C transaction and write address 678 * If bit 3 is 1, DisplayPort transaction. 679 * If Bit 3 is 0, I2C transaction. 680 */ 681 writel(AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT | 682 AUX_TX_COMM_WRITE, ®s->aux_ch_ctl_1); 683 684 /* Start AUX transaction */ 685 ret = rk_edp_start_aux_transaction(regs); 686 if (ret != 0) { 687 debug("select_i2c_device Aux Transaction fail!\n"); 688 return ret; 689 } 690 691 return 0; 692 } 693 694 static int rk_edp_i2c_read(struct rk3288_edp *regs, unsigned int device_addr, 695 unsigned int val_addr, unsigned int count, u8 edid[]) 696 { 697 u32 val; 698 unsigned int i, j; 699 unsigned int cur_data_idx; 700 unsigned int defer = 0; 701 int ret = 0; 702 703 for (i = 0; i < count; i += 16) { 704 for (j = 0; j < 10; j++) { /* try 10 times */ 705 /* Clear AUX CH data buffer */ 706 writel(BUF_CLR, ®s->buf_data_ctl); 707 708 /* Set normal AUX CH command */ 709 clrbits_le32(®s->aux_ch_ctl_2, ADDR_ONLY); 710 711 /* 712 * If Rx sends defer, Tx sends only reads 713 * request without sending addres 714 */ 715 if (!defer) { 716 ret = rk_edp_select_i2c_device(regs, 717 device_addr, 718 val_addr + i); 719 } else { 720 defer = 0; 721 } 722 723 /* 724 * Set I2C transaction and write data 725 * If bit 3 is 1, DisplayPort transaction. 726 * If Bit 3 is 0, I2C transaction. 727 */ 728 writel(AUX_LENGTH(16) | AUX_TX_COMM_I2C_TRANSACTION | 729 AUX_TX_COMM_READ, ®s->aux_ch_ctl_1); 730 731 /* Start AUX transaction */ 732 ret = rk_edp_start_aux_transaction(regs); 733 if (ret == 0) { 734 break; 735 } else { 736 debug("Aux Transaction fail!\n"); 737 continue; 738 } 739 740 /* Check if Rx sends defer */ 741 val = readl(®s->aux_rx_comm); 742 if (val == AUX_RX_COMM_AUX_DEFER || 743 val == AUX_RX_COMM_I2C_DEFER) { 744 debug("Defer: %d\n\n", val); 745 defer = 1; 746 } 747 } 748 749 if (ret) 750 return ret; 751 752 for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) { 753 val = readl(®s->buf_data[cur_data_idx]); 754 edid[i + cur_data_idx] = (u8)val; 755 } 756 } 757 758 return 0; 759 } 760 761 static int rk_edp_set_link_train(struct rk_edp_priv *edp) 762 { 763 int ret; 764 765 ret = rk_edp_init_training(edp); 766 if (ret) { 767 printf("DP LT init failed!\n"); 768 return ret; 769 } 770 771 ret = rk_edp_hw_link_training(edp); 772 if (ret) 773 return ret; 774 775 return 0; 776 } 777 778 static void rk_edp_init_video(struct rk3288_edp *regs) 779 { 780 writel(VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG, 781 ®s->common_int_sta_1); 782 writel(CHA_CRI(4) | CHA_CTRL, ®s->sys_ctl_2); 783 writel(VID_HRES_TH(2) | VID_VRES_TH(0), ®s->video_ctl_8); 784 } 785 786 static void rk_edp_config_video_slave_mode(struct rk3288_edp *regs) 787 { 788 clrbits_le32(®s->func_en_1, VID_FIFO_FUNC_EN_N | VID_CAP_FUNC_EN_N); 789 } 790 791 static void rk_edp_set_video_cr_mn(struct rk3288_edp *regs, 792 enum clock_recovery_m_value_type type, 793 u32 m_value, 794 u32 n_value) 795 { 796 if (type == REGISTER_M) { 797 setbits_le32(®s->sys_ctl_4, FIX_M_VID); 798 writel(m_value & 0xff, ®s->m_vid_0); 799 writel((m_value >> 8) & 0xff, ®s->m_vid_1); 800 writel((m_value >> 16) & 0xff, ®s->m_vid_2); 801 802 writel(n_value & 0xf, ®s->n_vid_0); 803 writel((n_value >> 8) & 0xff, ®s->n_vid_1); 804 writel((n_value >> 16) & 0xff, ®s->n_vid_2); 805 } else { 806 clrbits_le32(®s->sys_ctl_4, FIX_M_VID); 807 808 writel(0x00, ®s->n_vid_0); 809 writel(0x80, ®s->n_vid_1); 810 writel(0x00, ®s->n_vid_2); 811 } 812 } 813 814 static int rk_edp_is_video_stream_clock_on(struct rk3288_edp *regs) 815 { 816 ulong start; 817 u32 val; 818 819 start = get_timer(0); 820 do { 821 val = readl(®s->sys_ctl_1); 822 823 /* must write value to update DET_STA bit status */ 824 writel(val, ®s->sys_ctl_1); 825 val = readl(®s->sys_ctl_1); 826 if (!(val & DET_STA)) 827 continue; 828 829 val = readl(®s->sys_ctl_2); 830 831 /* must write value to update CHA_STA bit status */ 832 writel(val, ®s->sys_ctl_2); 833 val = readl(®s->sys_ctl_2); 834 if (!(val & CHA_STA)) 835 return 0; 836 837 } while (get_timer(start) < 100); 838 839 return -ETIMEDOUT; 840 } 841 842 static int rk_edp_is_video_stream_on(struct rk_edp_priv *edp) 843 { 844 ulong start; 845 u32 val; 846 847 start = get_timer(0); 848 do { 849 val = readl(&edp->regs->sys_ctl_3); 850 851 /* must write value to update STRM_VALID bit status */ 852 writel(val, &edp->regs->sys_ctl_3); 853 854 val = readl(&edp->regs->sys_ctl_3); 855 if (!(val & STRM_VALID)) 856 return 0; 857 } while (get_timer(start) < 100); 858 859 return -ETIMEDOUT; 860 } 861 862 static int rk_edp_config_video(struct rk_edp_priv *edp) 863 { 864 int ret; 865 866 rk_edp_config_video_slave_mode(edp->regs); 867 868 if (!rk_edp_get_pll_locked(edp->regs)) { 869 debug("PLL is not locked yet.\n"); 870 return -ETIMEDOUT; 871 } 872 873 ret = rk_edp_is_video_stream_clock_on(edp->regs); 874 if (ret) 875 return ret; 876 877 /* Set to use the register calculated M/N video */ 878 rk_edp_set_video_cr_mn(edp->regs, CALCULATED_M, 0, 0); 879 880 /* For video bist, Video timing must be generated by register */ 881 clrbits_le32(&edp->regs->video_ctl_10, F_SEL); 882 883 /* Disable video mute */ 884 clrbits_le32(&edp->regs->video_ctl_1, VIDEO_MUTE); 885 886 /* Enable video at next frame */ 887 setbits_le32(&edp->regs->video_ctl_1, VIDEO_EN); 888 889 return rk_edp_is_video_stream_on(edp); 890 } 891 892 static void rockchip_edp_force_hpd(struct rk_edp_priv *edp) 893 { 894 setbits_le32(&edp->regs->sys_ctl_3, F_HPD | HPD_CTRL); 895 } 896 897 static int rockchip_edp_get_plug_in_status(struct rk_edp_priv *edp) 898 { 899 u32 val; 900 901 val = readl(&edp->regs->sys_ctl_3); 902 if (val & HPD_STATUS) 903 return 1; 904 905 return 0; 906 } 907 908 /* 909 * support edp HPD function 910 * some hardware version do not support edp hdp, 911 * we use 200ms to try to get the hpd single now, 912 * if we can not get edp hpd single, it will delay 200ms, 913 * also meet the edp power timing request, to compatible 914 * all of the hardware version 915 */ 916 static void rockchip_edp_wait_hpd(struct rk_edp_priv *edp) 917 { 918 ulong start; 919 920 start = get_timer(0); 921 do { 922 if (rockchip_edp_get_plug_in_status(edp)) 923 return; 924 udelay(100); 925 } while (get_timer(start) < 200); 926 927 debug("do not get hpd single, force hpd\n"); 928 rockchip_edp_force_hpd(edp); 929 } 930 931 static int rk_edp_enable(struct udevice *dev, int panel_bpp, 932 const struct display_timing *edid) 933 { 934 struct rk_edp_priv *priv = dev_get_priv(dev); 935 int ret = 0; 936 937 ret = rk_edp_set_link_train(priv); 938 if (ret) { 939 printf("link train failed!\n"); 940 return ret; 941 } 942 943 rk_edp_init_video(priv->regs); 944 ret = rk_edp_config_video(priv); 945 if (ret) { 946 printf("config video failed\n"); 947 return ret; 948 } 949 ret = panel_enable_backlight(priv->panel); 950 if (ret) { 951 debug("%s: backlight error: %d\n", __func__, ret); 952 return ret; 953 } 954 955 return 0; 956 } 957 958 static int rk_edp_read_edid(struct udevice *dev, u8 *buf, int buf_size) 959 { 960 struct rk_edp_priv *priv = dev_get_priv(dev); 961 u32 edid_size = EDID_LENGTH; 962 int ret; 963 int i; 964 965 for (i = 0; i < 3; i++) { 966 ret = rk_edp_i2c_read(priv->regs, EDID_ADDR, EDID_HEADER, 967 EDID_LENGTH, &buf[EDID_HEADER]); 968 if (ret) { 969 debug("EDID read failed\n"); 970 continue; 971 } 972 973 /* 974 * check if the EDID has an extension flag, and read additional 975 * EDID data if needed 976 */ 977 if (buf[EDID_EXTENSION_FLAG]) { 978 edid_size += EDID_LENGTH; 979 ret = rk_edp_i2c_read(priv->regs, EDID_ADDR, 980 EDID_LENGTH, EDID_LENGTH, 981 &buf[EDID_LENGTH]); 982 if (ret) { 983 debug("EDID Read failed!\n"); 984 continue; 985 } 986 } 987 goto done; 988 } 989 990 /* After 3 attempts, give up */ 991 return ret; 992 993 done: 994 return edid_size; 995 } 996 997 static int rk_edp_ofdata_to_platdata(struct udevice *dev) 998 { 999 struct rk_edp_priv *priv = dev_get_priv(dev); 1000 1001 priv->regs = (struct rk3288_edp *)dev_get_addr(dev); 1002 priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); 1003 1004 return 0; 1005 } 1006 1007 int rk_edp_probe(struct udevice *dev) 1008 { 1009 struct display_plat *uc_plat = dev_get_uclass_platdata(dev); 1010 struct rk_edp_priv *priv = dev_get_priv(dev); 1011 struct rk3288_edp *regs = priv->regs; 1012 struct clk clk; 1013 int ret; 1014 1015 ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "rockchip,panel", 1016 &priv->panel); 1017 if (ret) { 1018 debug("%s: Cannot find panel for '%s' (ret=%d)\n", __func__, 1019 dev->name, ret); 1020 return ret; 1021 } 1022 1023 int vop_id = uc_plat->source_id; 1024 debug("%s, uc_plat=%p, vop_id=%u\n", __func__, uc_plat, vop_id); 1025 1026 ret = clk_get_by_index(dev, 1, &clk); 1027 if (ret >= 0) { 1028 ret = clk_set_rate(&clk, 0); 1029 clk_free(&clk); 1030 } 1031 if (ret) { 1032 debug("%s: Failed to set EDP clock: ret=%d\n", __func__, ret); 1033 return ret; 1034 } 1035 1036 ret = clk_get_by_index(uc_plat->src_dev, 0, &clk); 1037 if (ret >= 0) { 1038 ret = clk_set_rate(&clk, 192000000); 1039 clk_free(&clk); 1040 } 1041 if (ret < 0) { 1042 debug("%s: Failed to set clock in source device '%s': ret=%d\n", 1043 __func__, uc_plat->src_dev->name, ret); 1044 return ret; 1045 } 1046 1047 /* grf_edp_ref_clk_sel: from internal 24MHz or 27MHz clock */ 1048 rk_setreg(&priv->grf->soc_con12, 1 << 4); 1049 1050 /* select epd signal from vop0 or vop1 */ 1051 rk_setreg(&priv->grf->soc_con6, (vop_id == 1) ? (1 << 5) : (1 << 5)); 1052 1053 rockchip_edp_wait_hpd(priv); 1054 1055 rk_edp_init_refclk(regs); 1056 rk_edp_init_interrupt(regs); 1057 rk_edp_enable_sw_function(regs); 1058 ret = rk_edp_init_analog_func(regs); 1059 if (ret) 1060 return ret; 1061 rk_edp_init_aux(regs); 1062 1063 return 0; 1064 } 1065 1066 static const struct dm_display_ops dp_rockchip_ops = { 1067 .read_edid = rk_edp_read_edid, 1068 .enable = rk_edp_enable, 1069 }; 1070 1071 static const struct udevice_id rockchip_dp_ids[] = { 1072 { .compatible = "rockchip,rk3288-edp" }, 1073 { } 1074 }; 1075 1076 U_BOOT_DRIVER(dp_rockchip) = { 1077 .name = "edp_rockchip", 1078 .id = UCLASS_DISPLAY, 1079 .of_match = rockchip_dp_ids, 1080 .ops = &dp_rockchip_ops, 1081 .ofdata_to_platdata = rk_edp_ofdata_to_platdata, 1082 .probe = rk_edp_probe, 1083 .priv_auto_alloc_size = sizeof(struct rk_edp_priv), 1084 }; 1085