1 /* 2 * PXA LCD Controller 3 * 4 * (C) Copyright 2001-2002 5 * Wolfgang Denk, DENX Software Engineering -- wd@denx.de 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 /************************************************************************/ 11 /* ** HEADER FILES */ 12 /************************************************************************/ 13 14 #include <common.h> 15 #include <asm/arch/pxa-regs.h> 16 #include <asm/io.h> 17 #include <lcd.h> 18 #include <linux/types.h> 19 #include <stdarg.h> 20 #include <stdio_dev.h> 21 22 /* #define DEBUG */ 23 24 #ifdef CONFIG_LCD 25 26 /*----------------------------------------------------------------------*/ 27 /* 28 * Define panel bpp, LCCR0, LCCR3 and panel_info video struct for 29 * your display. 30 */ 31 32 #ifdef CONFIG_PXA_VGA 33 /* LCD outputs connected to a video DAC */ 34 # define LCD_BPP LCD_COLOR8 35 36 /* you have to set lccr0 and lccr3 (including pcd) */ 37 # define REG_LCCR0 0x003008f8 38 # define REG_LCCR3 0x0300FF01 39 40 /* 640x480x16 @ 61 Hz */ 41 vidinfo_t panel_info = { 42 .vl_col = 640, 43 .vl_row = 480, 44 .vl_width = 640, 45 .vl_height = 480, 46 .vl_clkp = CONFIG_SYS_HIGH, 47 .vl_oep = CONFIG_SYS_HIGH, 48 .vl_hsp = CONFIG_SYS_HIGH, 49 .vl_vsp = CONFIG_SYS_HIGH, 50 .vl_dp = CONFIG_SYS_HIGH, 51 .vl_bpix = LCD_BPP, 52 .vl_lbw = 0, 53 .vl_splt = 0, 54 .vl_clor = 0, 55 .vl_tft = 1, 56 .vl_hpw = 40, 57 .vl_blw = 56, 58 .vl_elw = 56, 59 .vl_vpw = 20, 60 .vl_bfw = 8, 61 .vl_efw = 8, 62 }; 63 #endif /* CONFIG_PXA_VIDEO */ 64 65 /*----------------------------------------------------------------------*/ 66 #ifdef CONFIG_SHARP_LM8V31 67 68 # define LCD_BPP LCD_COLOR8 69 # define LCD_INVERT_COLORS /* Needed for colors to be correct, but why? */ 70 71 /* you have to set lccr0 and lccr3 (including pcd) */ 72 # define REG_LCCR0 0x0030087C 73 # define REG_LCCR3 0x0340FF08 74 75 vidinfo_t panel_info = { 76 .vl_col = 640, 77 .vl_row = 480, 78 .vl_width = 157, 79 .vl_height = 118, 80 .vl_clkp = CONFIG_SYS_HIGH, 81 .vl_oep = CONFIG_SYS_HIGH, 82 .vl_hsp = CONFIG_SYS_HIGH, 83 .vl_vsp = CONFIG_SYS_HIGH, 84 .vl_dp = CONFIG_SYS_HIGH, 85 .vl_bpix = LCD_BPP, 86 .vl_lbw = 0, 87 .vl_splt = 1, 88 .vl_clor = 1, 89 .vl_tft = 0, 90 .vl_hpw = 1, 91 .vl_blw = 3, 92 .vl_elw = 3, 93 .vl_vpw = 1, 94 .vl_bfw = 0, 95 .vl_efw = 0, 96 }; 97 #endif /* CONFIG_SHARP_LM8V31 */ 98 /*----------------------------------------------------------------------*/ 99 #ifdef CONFIG_VOIPAC_LCD 100 101 # define LCD_BPP LCD_COLOR8 102 # define LCD_INVERT_COLORS 103 104 /* you have to set lccr0 and lccr3 (including pcd) */ 105 # define REG_LCCR0 0x043008f8 106 # define REG_LCCR3 0x0340FF08 107 108 vidinfo_t panel_info = { 109 .vl_col = 640, 110 .vl_row = 480, 111 .vl_width = 157, 112 .vl_height = 118, 113 .vl_clkp = CONFIG_SYS_HIGH, 114 .vl_oep = CONFIG_SYS_HIGH, 115 .vl_hsp = CONFIG_SYS_HIGH, 116 .vl_vsp = CONFIG_SYS_HIGH, 117 .vl_dp = CONFIG_SYS_HIGH, 118 .vl_bpix = LCD_BPP, 119 .vl_lbw = 0, 120 .vl_splt = 1, 121 .vl_clor = 1, 122 .vl_tft = 1, 123 .vl_hpw = 32, 124 .vl_blw = 144, 125 .vl_elw = 32, 126 .vl_vpw = 2, 127 .vl_bfw = 13, 128 .vl_efw = 30, 129 }; 130 #endif /* CONFIG_VOIPAC_LCD */ 131 132 /*----------------------------------------------------------------------*/ 133 #ifdef CONFIG_HITACHI_SX14 134 /* Hitachi SX14Q004-ZZA color STN LCD */ 135 #define LCD_BPP LCD_COLOR8 136 137 /* you have to set lccr0 and lccr3 (including pcd) */ 138 #define REG_LCCR0 0x00301079 139 #define REG_LCCR3 0x0340FF20 140 141 vidinfo_t panel_info = { 142 .vl_col = 320, 143 .vl_row = 240, 144 .vl_width = 167, 145 .vl_height = 109, 146 .vl_clkp = CONFIG_SYS_HIGH, 147 .vl_oep = CONFIG_SYS_HIGH, 148 .vl_hsp = CONFIG_SYS_HIGH, 149 .vl_vsp = CONFIG_SYS_HIGH, 150 .vl_dp = CONFIG_SYS_HIGH, 151 .vl_bpix = LCD_BPP, 152 .vl_lbw = 1, 153 .vl_splt = 0, 154 .vl_clor = 1, 155 .vl_tft = 0, 156 .vl_hpw = 1, 157 .vl_blw = 1, 158 .vl_elw = 1, 159 .vl_vpw = 7, 160 .vl_bfw = 0, 161 .vl_efw = 0, 162 }; 163 #endif /* CONFIG_HITACHI_SX14 */ 164 165 /*----------------------------------------------------------------------*/ 166 #ifdef CONFIG_LMS283GF05 167 168 # define LCD_BPP LCD_COLOR8 169 /*# define LCD_INVERT_COLORS*/ 170 171 /* you have to set lccr0 and lccr3 (including pcd) */ 172 # define REG_LCCR0 0x043008f8 173 # define REG_LCCR3 0x03b00009 174 175 vidinfo_t panel_info = { 176 .vl_col = 240, 177 .vl_row = 320, 178 .vl_width = 240, 179 .vl_height = 320, 180 .vl_clkp = CONFIG_SYS_HIGH, 181 .vl_oep = CONFIG_SYS_LOW, 182 .vl_hsp = CONFIG_SYS_LOW, 183 .vl_vsp = CONFIG_SYS_LOW, 184 .vl_dp = CONFIG_SYS_HIGH, 185 .vl_bpix = LCD_BPP, 186 .vl_lbw = 0, 187 .vl_splt = 1, 188 .vl_clor = 1, 189 .vl_tft = 1, 190 .vl_hpw = 4, 191 .vl_blw = 4, 192 .vl_elw = 8, 193 .vl_vpw = 4, 194 .vl_bfw = 4, 195 .vl_efw = 8, 196 }; 197 #endif /* CONFIG_LMS283GF05 */ 198 199 /*----------------------------------------------------------------------*/ 200 201 #ifdef CONFIG_ACX517AKN 202 203 # define LCD_BPP LCD_COLOR8 204 205 /* you have to set lccr0 and lccr3 (including pcd) */ 206 # define REG_LCCR0 0x003008f9 207 # define REG_LCCR3 0x03700006 208 209 vidinfo_t panel_info = { 210 .vl_col = 320, 211 .vl_row = 320, 212 .vl_width = 320, 213 .vl_height = 320, 214 .vl_clkp = CONFIG_SYS_HIGH, 215 .vl_oep = CONFIG_SYS_LOW, 216 .vl_hsp = CONFIG_SYS_LOW, 217 .vl_vsp = CONFIG_SYS_LOW, 218 .vl_dp = CONFIG_SYS_HIGH, 219 .vl_bpix = LCD_BPP, 220 .vl_lbw = 0, 221 .vl_splt = 1, 222 .vl_clor = 1, 223 .vl_tft = 1, 224 .vl_hpw = 0x04, 225 .vl_blw = 0x1c, 226 .vl_elw = 0x08, 227 .vl_vpw = 0x01, 228 .vl_bfw = 0x07, 229 .vl_efw = 0x08, 230 }; 231 #endif /* CONFIG_ACX517AKN */ 232 233 #ifdef CONFIG_ACX544AKN 234 235 # define LCD_BPP LCD_COLOR16 236 237 /* you have to set lccr0 and lccr3 (including pcd) */ 238 # define REG_LCCR0 0x003008f9 239 # define REG_LCCR3 0x04700007 /* 16bpp */ 240 241 vidinfo_t panel_info = { 242 .vl_col = 320, 243 .vl_row = 320, 244 .vl_width = 320, 245 .vl_height = 320, 246 .vl_clkp = CONFIG_SYS_LOW, 247 .vl_oep = CONFIG_SYS_LOW, 248 .vl_hsp = CONFIG_SYS_LOW, 249 .vl_vsp = CONFIG_SYS_LOW, 250 .vl_dp = CONFIG_SYS_LOW, 251 .vl_bpix = LCD_BPP, 252 .vl_lbw = 0, 253 .vl_splt = 0, 254 .vl_clor = 1, 255 .vl_tft = 1, 256 .vl_hpw = 0x05, 257 .vl_blw = 0x13, 258 .vl_elw = 0x08, 259 .vl_vpw = 0x02, 260 .vl_bfw = 0x07, 261 .vl_efw = 0x05, 262 }; 263 #endif /* CONFIG_ACX544AKN */ 264 265 /*----------------------------------------------------------------------*/ 266 267 #ifdef CONFIG_LQ038J7DH53 268 269 # define LCD_BPP LCD_COLOR8 270 271 /* you have to set lccr0 and lccr3 (including pcd) */ 272 # define REG_LCCR0 0x003008f9 273 # define REG_LCCR3 0x03700004 274 275 vidinfo_t panel_info = { 276 .vl_col = 320, 277 .vl_row = 480, 278 .vl_width = 320, 279 .vl_height = 480, 280 .vl_clkp = CONFIG_SYS_HIGH, 281 .vl_oep = CONFIG_SYS_LOW, 282 .vl_hsp = CONFIG_SYS_LOW, 283 .vl_vsp = CONFIG_SYS_LOW, 284 .vl_dp = CONFIG_SYS_HIGH, 285 .vl_bpix = LCD_BPP, 286 .vl_lbw = 0, 287 .vl_splt = 1, 288 .vl_clor = 1, 289 .vl_tft = 1, 290 .vl_hpw = 0x04, 291 .vl_blw = 0x20, 292 .vl_elw = 0x01, 293 .vl_vpw = 0x01, 294 .vl_bfw = 0x04, 295 .vl_efw = 0x01, 296 }; 297 #endif /* CONFIG_ACX517AKN */ 298 299 /*----------------------------------------------------------------------*/ 300 301 #ifdef CONFIG_LITTLETON_LCD 302 # define LCD_BPP LCD_COLOR8 303 304 /* you have to set lccr0 and lccr3 (including pcd) */ 305 # define REG_LCCR0 0x003008f8 306 # define REG_LCCR3 0x0300FF04 307 308 vidinfo_t panel_info = { 309 .vl_col = 480, 310 .vl_row = 640, 311 .vl_width = 480, 312 .vl_height = 640, 313 .vl_clkp = CONFIG_SYS_HIGH, 314 .vl_oep = CONFIG_SYS_HIGH, 315 .vl_hsp = CONFIG_SYS_HIGH, 316 .vl_vsp = CONFIG_SYS_HIGH, 317 .vl_dp = CONFIG_SYS_HIGH, 318 .vl_bpix = LCD_BPP, 319 .vl_lbw = 0, 320 .vl_splt = 0, 321 .vl_clor = 0, 322 .vl_tft = 1, 323 .vl_hpw = 9, 324 .vl_blw = 8, 325 .vl_elw = 24, 326 .vl_vpw = 2, 327 .vl_bfw = 2, 328 .vl_efw = 4, 329 }; 330 #endif /* CONFIG_LITTLETON_LCD */ 331 332 /*----------------------------------------------------------------------*/ 333 334 static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid); 335 static void pxafb_setup_gpio (vidinfo_t *vid); 336 static void pxafb_enable_controller (vidinfo_t *vid); 337 static int pxafb_init (vidinfo_t *vid); 338 339 /************************************************************************/ 340 /* --------------- PXA chipset specific functions ------------------- */ 341 /************************************************************************/ 342 343 ushort *configuration_get_cmap(void) 344 { 345 struct pxafb_info *fbi = &panel_info.pxa; 346 return (ushort *)fbi->palette; 347 } 348 349 void lcd_ctrl_init (void *lcdbase) 350 { 351 pxafb_init_mem(lcdbase, &panel_info); 352 pxafb_init(&panel_info); 353 pxafb_setup_gpio(&panel_info); 354 pxafb_enable_controller(&panel_info); 355 } 356 357 /*----------------------------------------------------------------------*/ 358 #if LCD_BPP == LCD_COLOR8 359 void 360 lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) 361 { 362 struct pxafb_info *fbi = &panel_info.pxa; 363 unsigned short *palette = (unsigned short *)fbi->palette; 364 u_int val; 365 366 if (regno < fbi->palette_size) { 367 val = ((red << 8) & 0xf800); 368 val |= ((green << 4) & 0x07e0); 369 val |= (blue & 0x001f); 370 371 #ifdef LCD_INVERT_COLORS 372 palette[regno] = ~val; 373 #else 374 palette[regno] = val; 375 #endif 376 } 377 378 debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %04X\n", 379 regno, &palette[regno], 380 red, green, blue, 381 palette[regno]); 382 } 383 #endif /* LCD_COLOR8 */ 384 385 /*----------------------------------------------------------------------*/ 386 __weak void lcd_enable(void) 387 { 388 } 389 390 /************************************************************************/ 391 /* ** PXA255 specific routines */ 392 /************************************************************************/ 393 394 /* 395 * Calculate fb size for VIDEOLFB_ATAG. Size returned contains fb, 396 * descriptors and palette areas. 397 */ 398 ulong calc_fbsize (void) 399 { 400 ulong size; 401 int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; 402 403 size = line_length * panel_info.vl_row; 404 size += PAGE_SIZE; 405 406 return size; 407 } 408 409 static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid) 410 { 411 u_long palette_mem_size; 412 struct pxafb_info *fbi = &vid->pxa; 413 int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8; 414 415 fbi->screen = (u_long)lcdbase; 416 417 fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16; 418 palette_mem_size = fbi->palette_size * sizeof(u16); 419 420 debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); 421 /* locate palette and descs at end of page following fb */ 422 fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size; 423 424 return 0; 425 } 426 #ifdef CONFIG_CPU_MONAHANS 427 static inline void pxafb_setup_gpio (vidinfo_t *vid) {} 428 #else 429 static void pxafb_setup_gpio (vidinfo_t *vid) 430 { 431 u_long lccr0; 432 433 /* 434 * setup is based on type of panel supported 435 */ 436 437 lccr0 = vid->pxa.reg_lccr0; 438 439 /* 4 bit interface */ 440 if ((lccr0 & LCCR0_CMS) && (lccr0 & LCCR0_SDS) && !(lccr0 & LCCR0_DPD)) 441 { 442 debug("Setting GPIO for 4 bit data\n"); 443 /* bits 58-61 */ 444 writel(readl(GPDR1) | (0xf << 26), GPDR1); 445 writel((readl(GAFR1_U) & ~(0xff << 20)) | (0xaa << 20), 446 GAFR1_U); 447 448 /* bits 74-77 */ 449 writel(readl(GPDR2) | (0xf << 10), GPDR2); 450 writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20), 451 GAFR2_L); 452 } 453 454 /* 8 bit interface */ 455 else if (((lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_DPD))) || 456 (!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS))) 457 { 458 debug("Setting GPIO for 8 bit data\n"); 459 /* bits 58-65 */ 460 writel(readl(GPDR1) | (0x3f << 26), GPDR1); 461 writel(readl(GPDR2) | (0x3), GPDR2); 462 463 writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20), 464 GAFR1_U); 465 writel((readl(GAFR2_L) & ~0xf) | (0xa), GAFR2_L); 466 467 /* bits 74-77 */ 468 writel(readl(GPDR2) | (0xf << 10), GPDR2); 469 writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20), 470 GAFR2_L); 471 } 472 473 /* 16 bit interface */ 474 else if (!(lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_PAS))) 475 { 476 debug("Setting GPIO for 16 bit data\n"); 477 /* bits 58-77 */ 478 writel(readl(GPDR1) | (0x3f << 26), GPDR1); 479 writel(readl(GPDR2) | 0x00003fff, GPDR2); 480 481 writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20), 482 GAFR1_U); 483 writel((readl(GAFR2_L) & 0xf0000000) | 0x0aaaaaaa, GAFR2_L); 484 } 485 else 486 { 487 printf("pxafb_setup_gpio: unable to determine bits per pixel\n"); 488 } 489 } 490 #endif 491 492 static void pxafb_enable_controller (vidinfo_t *vid) 493 { 494 debug("Enabling LCD controller\n"); 495 496 /* Sequence from 11.7.10 */ 497 writel(vid->pxa.reg_lccr3, LCCR3); 498 writel(vid->pxa.reg_lccr2, LCCR2); 499 writel(vid->pxa.reg_lccr1, LCCR1); 500 writel(vid->pxa.reg_lccr0 & ~LCCR0_ENB, LCCR0); 501 writel(vid->pxa.fdadr0, FDADR0); 502 writel(vid->pxa.fdadr1, FDADR1); 503 writel(readl(LCCR0) | LCCR0_ENB, LCCR0); 504 505 #ifdef CONFIG_CPU_MONAHANS 506 writel(readl(CKENA) | CKENA_1_LCD, CKENA); 507 #else 508 writel(readl(CKEN) | CKEN16_LCD, CKEN); 509 #endif 510 511 debug("FDADR0 = 0x%08x\n", readl(FDADR0)); 512 debug("FDADR1 = 0x%08x\n", readl(FDADR1)); 513 debug("LCCR0 = 0x%08x\n", readl(LCCR0)); 514 debug("LCCR1 = 0x%08x\n", readl(LCCR1)); 515 debug("LCCR2 = 0x%08x\n", readl(LCCR2)); 516 debug("LCCR3 = 0x%08x\n", readl(LCCR3)); 517 } 518 519 static int pxafb_init (vidinfo_t *vid) 520 { 521 struct pxafb_info *fbi = &vid->pxa; 522 523 debug("Configuring PXA LCD\n"); 524 525 fbi->reg_lccr0 = REG_LCCR0; 526 fbi->reg_lccr3 = REG_LCCR3; 527 528 debug("vid: vl_col=%d hslen=%d lm=%d rm=%d\n", 529 vid->vl_col, vid->vl_hpw, 530 vid->vl_blw, vid->vl_elw); 531 debug("vid: vl_row=%d vslen=%d um=%d bm=%d\n", 532 vid->vl_row, vid->vl_vpw, 533 vid->vl_bfw, vid->vl_efw); 534 535 fbi->reg_lccr1 = 536 LCCR1_DisWdth(vid->vl_col) + 537 LCCR1_HorSnchWdth(vid->vl_hpw) + 538 LCCR1_BegLnDel(vid->vl_blw) + 539 LCCR1_EndLnDel(vid->vl_elw); 540 541 fbi->reg_lccr2 = 542 LCCR2_DisHght(vid->vl_row) + 543 LCCR2_VrtSnchWdth(vid->vl_vpw) + 544 LCCR2_BegFrmDel(vid->vl_bfw) + 545 LCCR2_EndFrmDel(vid->vl_efw); 546 547 fbi->reg_lccr3 = REG_LCCR3 & ~(LCCR3_HSP | LCCR3_VSP); 548 fbi->reg_lccr3 |= (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH) 549 | (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH); 550 551 552 /* setup dma descriptors */ 553 fbi->dmadesc_fblow = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 3*16); 554 fbi->dmadesc_fbhigh = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 2*16); 555 fbi->dmadesc_palette = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 1*16); 556 557 #define BYTES_PER_PANEL ((fbi->reg_lccr0 & LCCR0_SDS) ? \ 558 (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8 / 2) : \ 559 (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8)) 560 561 /* populate descriptors */ 562 fbi->dmadesc_fblow->fdadr = (u_long)fbi->dmadesc_fblow; 563 fbi->dmadesc_fblow->fsadr = fbi->screen + BYTES_PER_PANEL; 564 fbi->dmadesc_fblow->fidr = 0; 565 fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL; 566 567 fbi->fdadr1 = (u_long)fbi->dmadesc_fblow; /* only used in dual-panel mode */ 568 569 fbi->dmadesc_fbhigh->fsadr = fbi->screen; 570 fbi->dmadesc_fbhigh->fidr = 0; 571 fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL; 572 573 fbi->dmadesc_palette->fsadr = fbi->palette; 574 fbi->dmadesc_palette->fidr = 0; 575 fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL; 576 577 if( NBITS(vid->vl_bpix) < 12) 578 { 579 /* assume any mode with <12 bpp is palette driven */ 580 fbi->dmadesc_palette->fdadr = (u_long)fbi->dmadesc_fbhigh; 581 fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_palette; 582 /* flips back and forth between pal and fbhigh */ 583 fbi->fdadr0 = (u_long)fbi->dmadesc_palette; 584 } 585 else 586 { 587 /* palette shouldn't be loaded in true-color mode */ 588 fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_fbhigh; 589 fbi->fdadr0 = (u_long)fbi->dmadesc_fbhigh; /* no pal just fbhigh */ 590 } 591 592 debug("fbi->dmadesc_fblow = 0x%lx\n", (u_long)fbi->dmadesc_fblow); 593 debug("fbi->dmadesc_fbhigh = 0x%lx\n", (u_long)fbi->dmadesc_fbhigh); 594 debug("fbi->dmadesc_palette = 0x%lx\n", (u_long)fbi->dmadesc_palette); 595 596 debug("fbi->dmadesc_fblow->fdadr = 0x%lx\n", fbi->dmadesc_fblow->fdadr); 597 debug("fbi->dmadesc_fbhigh->fdadr = 0x%lx\n", fbi->dmadesc_fbhigh->fdadr); 598 debug("fbi->dmadesc_palette->fdadr = 0x%lx\n", fbi->dmadesc_palette->fdadr); 599 600 debug("fbi->dmadesc_fblow->fsadr = 0x%lx\n", fbi->dmadesc_fblow->fsadr); 601 debug("fbi->dmadesc_fbhigh->fsadr = 0x%lx\n", fbi->dmadesc_fbhigh->fsadr); 602 debug("fbi->dmadesc_palette->fsadr = 0x%lx\n", fbi->dmadesc_palette->fsadr); 603 604 debug("fbi->dmadesc_fblow->ldcmd = 0x%lx\n", fbi->dmadesc_fblow->ldcmd); 605 debug("fbi->dmadesc_fbhigh->ldcmd = 0x%lx\n", fbi->dmadesc_fbhigh->ldcmd); 606 debug("fbi->dmadesc_palette->ldcmd = 0x%lx\n", fbi->dmadesc_palette->ldcmd); 607 608 return 0; 609 } 610 611 /************************************************************************/ 612 /************************************************************************/ 613 614 #endif /* CONFIG_LCD */ 615