1 /* 2 * (C) Copyright 2007 3 * DENX Software Engineering, Anatolij Gustschin, agust@denx.de 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 /* 9 * mb862xx.c - Graphic interface for Fujitsu CoralP/Lime 10 * PCI and video mode code was derived from smiLynxEM driver. 11 */ 12 13 #include <common.h> 14 15 #include <asm/io.h> 16 #include <pci.h> 17 #include <video_fb.h> 18 #include "videomodes.h" 19 #include <mb862xx.h> 20 21 #if defined(CONFIG_POST) 22 #include <post.h> 23 #endif 24 25 /* 26 * Graphic Device 27 */ 28 GraphicDevice mb862xx; 29 30 /* 31 * 32MB external RAM - 256K Chip MMIO = 0x1FC0000 ; 32 */ 33 #define VIDEO_MEM_SIZE 0x01FC0000 34 35 #if defined(CONFIG_PCI) 36 #if defined(CONFIG_VIDEO_CORALP) 37 38 static struct pci_device_id supported[] = { 39 { PCI_VENDOR_ID_FUJITSU, PCI_DEVICE_ID_CORAL_P }, 40 { PCI_VENDOR_ID_FUJITSU, PCI_DEVICE_ID_CORAL_PA }, 41 { } 42 }; 43 44 /* Internal clock frequency divider table, index is mode number */ 45 unsigned int fr_div[] = { 0x00000f00, 0x00000900, 0x00000500 }; 46 #endif 47 #endif 48 49 #if defined(CONFIG_VIDEO_CORALP) 50 #define rd_io in32r 51 #define wr_io out32r 52 #else 53 #define rd_io(addr) in_be32((volatile unsigned *)(addr)) 54 #define wr_io(addr, val) out_be32((volatile unsigned *)(addr), (val)) 55 #endif 56 57 #define HOST_RD_REG(off) rd_io((dev->frameAdrs + GC_HOST_BASE + (off))) 58 #define HOST_WR_REG(off, val) wr_io((dev->frameAdrs + GC_HOST_BASE + (off)), \ 59 (val)) 60 #define DISP_RD_REG(off) rd_io((dev->frameAdrs + GC_DISP_BASE + (off))) 61 #define DISP_WR_REG(off, val) wr_io((dev->frameAdrs + GC_DISP_BASE + (off)), \ 62 (val)) 63 #define DE_RD_REG(off) rd_io((dev->dprBase + (off))) 64 #define DE_WR_REG(off, val) wr_io((dev->dprBase + (off)), (val)) 65 66 #if defined(CONFIG_VIDEO_CORALP) 67 #define DE_WR_FIFO(val) wr_io((dev->dprBase + (GC_GEO_FIFO)), (val)) 68 #else 69 #define DE_WR_FIFO(val) wr_io((dev->dprBase + (GC_FIFO)), (val)) 70 #endif 71 72 #define L0PAL_WR_REG(idx, val) wr_io((dev->frameAdrs + \ 73 (GC_DISP_BASE | GC_L0PAL0) + \ 74 ((idx) << 2)), (val)) 75 76 #if defined(CONFIG_VIDEO_MB862xx_ACCEL) 77 static void gdc_sw_reset (void) 78 { 79 GraphicDevice *dev = &mb862xx; 80 81 HOST_WR_REG (GC_SRST, 0x1); 82 udelay (500); 83 video_hw_init (); 84 } 85 86 87 static void de_wait (void) 88 { 89 GraphicDevice *dev = &mb862xx; 90 int lc = 0x10000; 91 92 /* 93 * Sync with software writes to framebuffer, 94 * try to reset if engine locked 95 */ 96 while (DE_RD_REG (GC_CTR) & 0x00000131) 97 if (lc-- < 0) { 98 gdc_sw_reset (); 99 puts ("gdc reset done after drawing engine lock.\n"); 100 break; 101 } 102 } 103 104 static void de_wait_slots (int slots) 105 { 106 GraphicDevice *dev = &mb862xx; 107 int lc = 0x10000; 108 109 /* Wait for free fifo slots */ 110 while (DE_RD_REG (GC_IFCNT) < slots) 111 if (lc-- < 0) { 112 gdc_sw_reset (); 113 puts ("gdc reset done after drawing engine lock.\n"); 114 break; 115 } 116 } 117 #endif 118 119 #if !defined(CONFIG_VIDEO_CORALP) 120 static void board_disp_init (void) 121 { 122 GraphicDevice *dev = &mb862xx; 123 const gdc_regs *regs = board_get_regs (); 124 125 while (regs->index) { 126 DISP_WR_REG (regs->index, regs->value); 127 regs++; 128 } 129 } 130 #endif 131 132 /* 133 * Init drawing engine if accel enabled. 134 * Also clears visible framebuffer. 135 */ 136 static void de_init (void) 137 { 138 GraphicDevice *dev = &mb862xx; 139 #if defined(CONFIG_VIDEO_MB862xx_ACCEL) 140 int cf = (dev->gdfBytesPP == 1) ? 0x0000 : 0x8000; 141 142 dev->dprBase = dev->frameAdrs + GC_DRAW_BASE; 143 144 /* Setup mode and fbbase, xres, fg, bg */ 145 de_wait_slots (2); 146 DE_WR_FIFO (0xf1010108); 147 DE_WR_FIFO (cf | 0x0300); 148 DE_WR_REG (GC_FBR, 0x0); 149 DE_WR_REG (GC_XRES, dev->winSizeX); 150 DE_WR_REG (GC_FC, 0x0); 151 DE_WR_REG (GC_BC, 0x0); 152 /* Reset clipping */ 153 DE_WR_REG (GC_CXMIN, 0x0); 154 DE_WR_REG (GC_CXMAX, dev->winSizeX); 155 DE_WR_REG (GC_CYMIN, 0x0); 156 DE_WR_REG (GC_CYMAX, dev->winSizeY); 157 158 /* Clear framebuffer using drawing engine */ 159 de_wait_slots (3); 160 DE_WR_FIFO (0x09410000); 161 DE_WR_FIFO (0x00000000); 162 DE_WR_FIFO (dev->winSizeY << 16 | dev->winSizeX); 163 /* sync with SW access to framebuffer */ 164 de_wait (); 165 #else 166 unsigned int i, *p; 167 168 i = dev->winSizeX * dev->winSizeY; 169 p = (unsigned int *)dev->frameAdrs; 170 while (i--) 171 *p++ = 0; 172 #endif 173 } 174 175 #if defined(CONFIG_VIDEO_CORALP) 176 /* use CCF and MMR parameters for Coral-P Eval. Board as default */ 177 #ifndef CONFIG_SYS_MB862xx_CCF 178 #define CONFIG_SYS_MB862xx_CCF 0x00090000 179 #endif 180 #ifndef CONFIG_SYS_MB862xx_MMR 181 #define CONFIG_SYS_MB862xx_MMR 0x11d7fa13 182 #endif 183 184 unsigned int pci_video_init (void) 185 { 186 GraphicDevice *dev = &mb862xx; 187 pci_dev_t devbusfn; 188 u16 device; 189 190 if ((devbusfn = pci_find_devices (supported, 0)) < 0) { 191 puts("controller not present\n"); 192 return 0; 193 } 194 195 /* PCI setup */ 196 pci_write_config_dword (devbusfn, PCI_COMMAND, 197 (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)); 198 pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, &dev->frameAdrs); 199 dev->frameAdrs = pci_mem_to_phys (devbusfn, dev->frameAdrs); 200 201 if (dev->frameAdrs == 0) { 202 puts ("PCI config: failed to get base address\n"); 203 return 0; 204 } 205 206 dev->pciBase = dev->frameAdrs; 207 208 puts("Coral-"); 209 210 pci_read_config_word(devbusfn, PCI_DEVICE_ID, &device); 211 switch (device) { 212 case PCI_DEVICE_ID_CORAL_P: 213 puts("P\n"); 214 break; 215 case PCI_DEVICE_ID_CORAL_PA: 216 puts("PA\n"); 217 break; 218 default: 219 puts("Unknown\n"); 220 return 0; 221 } 222 223 /* Setup clocks and memory mode for Coral-P(A) */ 224 HOST_WR_REG(GC_CCF, CONFIG_SYS_MB862xx_CCF); 225 udelay (200); 226 HOST_WR_REG(GC_MMR, CONFIG_SYS_MB862xx_MMR); 227 udelay (100); 228 return dev->frameAdrs; 229 } 230 231 unsigned int card_init (void) 232 { 233 GraphicDevice *dev = &mb862xx; 234 unsigned int cf, videomode, div = 0; 235 unsigned long t1, hsync, vsync; 236 char *penv; 237 int tmp, i, bpp; 238 struct ctfb_res_modes *res_mode; 239 struct ctfb_res_modes var_mode; 240 241 memset (dev, 0, sizeof (GraphicDevice)); 242 243 if (!pci_video_init ()) 244 return 0; 245 246 tmp = 0; 247 videomode = 0x310; 248 /* get video mode via environment */ 249 if ((penv = getenv ("videomode")) != NULL) { 250 /* decide if it is a string */ 251 if (penv[0] <= '9') { 252 videomode = (int) simple_strtoul (penv, NULL, 16); 253 tmp = 1; 254 } 255 } else { 256 tmp = 1; 257 } 258 259 if (tmp) { 260 /* parameter are vesa modes, search params */ 261 for (i = 0; i < VESA_MODES_COUNT; i++) { 262 if (vesa_modes[i].vesanr == videomode) 263 break; 264 } 265 if (i == VESA_MODES_COUNT) { 266 printf ("\tno VESA Mode found, fallback to mode 0x%x\n", 267 videomode); 268 i = 0; 269 } 270 res_mode = (struct ctfb_res_modes *) 271 &res_mode_init[vesa_modes[i].resindex]; 272 if (vesa_modes[i].resindex > 2) { 273 puts ("\tUnsupported resolution, using default\n"); 274 bpp = vesa_modes[1].bits_per_pixel; 275 div = fr_div[1]; 276 } 277 bpp = vesa_modes[i].bits_per_pixel; 278 div = fr_div[vesa_modes[i].resindex]; 279 } else { 280 res_mode = (struct ctfb_res_modes *) &var_mode; 281 bpp = video_get_params (res_mode, penv); 282 } 283 284 /* calculate hsync and vsync freq (info only) */ 285 t1 = (res_mode->left_margin + res_mode->xres + 286 res_mode->right_margin + res_mode->hsync_len) / 8; 287 t1 *= 8; 288 t1 *= res_mode->pixclock; 289 t1 /= 1000; 290 hsync = 1000000000L / t1; 291 t1 *= (res_mode->upper_margin + res_mode->yres + 292 res_mode->lower_margin + res_mode->vsync_len); 293 t1 /= 1000; 294 vsync = 1000000000L / t1; 295 296 /* fill in Graphic device struct */ 297 sprintf (dev->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres, 298 res_mode->yres, bpp, (hsync / 1000), (vsync / 1000)); 299 printf ("\t%s\n", dev->modeIdent); 300 dev->winSizeX = res_mode->xres; 301 dev->winSizeY = res_mode->yres; 302 dev->memSize = VIDEO_MEM_SIZE; 303 304 switch (bpp) { 305 case 8: 306 dev->gdfIndex = GDF__8BIT_INDEX; 307 dev->gdfBytesPP = 1; 308 break; 309 case 15: 310 case 16: 311 dev->gdfIndex = GDF_15BIT_555RGB; 312 dev->gdfBytesPP = 2; 313 break; 314 default: 315 printf ("\t%d bpp configured, but only 8,15 and 16 supported\n", 316 bpp); 317 puts ("\tfallback to 15bpp\n"); 318 dev->gdfIndex = GDF_15BIT_555RGB; 319 dev->gdfBytesPP = 2; 320 } 321 322 /* Setup dot clock (internal pll, division rate) */ 323 DISP_WR_REG (GC_DCM1, div); 324 /* L0 init */ 325 cf = (dev->gdfBytesPP == 1) ? 0x00000000 : 0x80000000; 326 DISP_WR_REG (GC_L0M, ((dev->winSizeX * dev->gdfBytesPP) / 64) << 16 | 327 (dev->winSizeY - 1) | cf); 328 DISP_WR_REG (GC_L0OA0, 0x0); 329 DISP_WR_REG (GC_L0DA0, 0x0); 330 DISP_WR_REG (GC_L0DY_L0DX, 0x0); 331 DISP_WR_REG (GC_L0EM, 0x0); 332 DISP_WR_REG (GC_L0WY_L0WX, 0x0); 333 DISP_WR_REG (GC_L0WH_L0WW, (dev->winSizeY - 1) << 16 | dev->winSizeX); 334 335 /* Display timing init */ 336 DISP_WR_REG (GC_HTP_A, (dev->winSizeX + 337 res_mode->left_margin + 338 res_mode->right_margin + 339 res_mode->hsync_len - 1) << 16); 340 DISP_WR_REG (GC_HDB_HDP_A, (dev->winSizeX - 1) << 16 | 341 (dev->winSizeX - 1)); 342 DISP_WR_REG (GC_VSW_HSW_HSP_A, (res_mode->vsync_len - 1) << 24 | 343 (res_mode->hsync_len - 1) << 16 | 344 (dev->winSizeX + 345 res_mode->right_margin - 1)); 346 DISP_WR_REG (GC_VTR_A, (dev->winSizeY + res_mode->lower_margin + 347 res_mode->upper_margin + 348 res_mode->vsync_len - 1) << 16); 349 DISP_WR_REG (GC_VDP_VSP_A, (dev->winSizeY-1) << 16 | 350 (dev->winSizeY + 351 res_mode->lower_margin - 1)); 352 DISP_WR_REG (GC_WY_WX, 0x0); 353 DISP_WR_REG (GC_WH_WW, dev->winSizeY << 16 | dev->winSizeX); 354 /* Display enable, L0 layer */ 355 DISP_WR_REG (GC_DCM1, 0x80010000 | div); 356 357 return dev->frameAdrs; 358 } 359 #endif 360 361 362 #if !defined(CONFIG_VIDEO_CORALP) 363 int mb862xx_probe(unsigned int addr) 364 { 365 GraphicDevice *dev = &mb862xx; 366 unsigned int reg; 367 368 dev->frameAdrs = addr; 369 dev->dprBase = dev->frameAdrs + GC_DRAW_BASE; 370 371 /* Try to access GDC ID/Revision registers */ 372 reg = HOST_RD_REG (GC_CID); 373 reg = HOST_RD_REG (GC_CID); 374 if (reg == 0x303) { 375 reg = DE_RD_REG(GC_REV); 376 reg = DE_RD_REG(GC_REV); 377 if ((reg & ~0xff) == 0x20050100) 378 return MB862XX_TYPE_LIME; 379 } 380 381 return 0; 382 } 383 #endif 384 385 void *video_hw_init (void) 386 { 387 GraphicDevice *dev = &mb862xx; 388 389 puts ("Video: Fujitsu "); 390 391 memset (dev, 0, sizeof (GraphicDevice)); 392 393 #if defined(CONFIG_VIDEO_CORALP) 394 if (card_init () == 0) 395 return NULL; 396 #else 397 /* 398 * Preliminary init of the onboard graphic controller, 399 * retrieve base address 400 */ 401 if ((dev->frameAdrs = board_video_init ()) == 0) { 402 puts ("Controller not found!\n"); 403 return NULL; 404 } else { 405 puts ("Lime\n"); 406 407 /* Set Change of Clock Frequency Register */ 408 HOST_WR_REG (GC_CCF, CONFIG_SYS_MB862xx_CCF); 409 /* Delay required */ 410 udelay(300); 411 /* Set Memory I/F Mode Register) */ 412 HOST_WR_REG (GC_MMR, CONFIG_SYS_MB862xx_MMR); 413 } 414 #endif 415 416 de_init (); 417 418 #if !defined(CONFIG_VIDEO_CORALP) 419 board_disp_init (); 420 #endif 421 422 #if defined(CONFIG_SOCRATES) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON) 423 /* Lamp on */ 424 board_backlight_switch (1); 425 #endif 426 427 return dev; 428 } 429 430 /* 431 * Set a RGB color in the LUT 432 */ 433 void video_set_lut (unsigned int index, unsigned char r, 434 unsigned char g, unsigned char b) 435 { 436 GraphicDevice *dev = &mb862xx; 437 438 L0PAL_WR_REG (index, (r << 16) | (g << 8) | (b)); 439 } 440 441 #if defined(CONFIG_VIDEO_MB862xx_ACCEL) 442 /* 443 * Drawing engine Fill and BitBlt screen region 444 */ 445 void video_hw_rectfill (unsigned int bpp, unsigned int dst_x, 446 unsigned int dst_y, unsigned int dim_x, 447 unsigned int dim_y, unsigned int color) 448 { 449 GraphicDevice *dev = &mb862xx; 450 451 de_wait_slots (3); 452 DE_WR_REG (GC_FC, color); 453 DE_WR_FIFO (0x09410000); 454 DE_WR_FIFO ((dst_y << 16) | dst_x); 455 DE_WR_FIFO ((dim_y << 16) | dim_x); 456 de_wait (); 457 } 458 459 void video_hw_bitblt (unsigned int bpp, unsigned int src_x, 460 unsigned int src_y, unsigned int dst_x, 461 unsigned int dst_y, unsigned int width, 462 unsigned int height) 463 { 464 GraphicDevice *dev = &mb862xx; 465 unsigned int ctrl = 0x0d000000L; 466 467 if (src_x >= dst_x && src_y >= dst_y) 468 ctrl |= 0x00440000L; 469 else if (src_x >= dst_x && src_y <= dst_y) 470 ctrl |= 0x00460000L; 471 else if (src_x <= dst_x && src_y >= dst_y) 472 ctrl |= 0x00450000L; 473 else 474 ctrl |= 0x00470000L; 475 476 de_wait_slots (4); 477 DE_WR_FIFO (ctrl); 478 DE_WR_FIFO ((src_y << 16) | src_x); 479 DE_WR_FIFO ((dst_y << 16) | dst_x); 480 DE_WR_FIFO ((height << 16) | width); 481 de_wait (); /* sync */ 482 } 483 #endif 484