1 /* 2 * Copyright (C) 2012 Samsung Electronics 3 * 4 * Author: Donghwa Lee <dh09.lee@samsung.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <config.h> 10 #include <common.h> 11 #include <linux/err.h> 12 #include <asm/arch/cpu.h> 13 #include <asm/arch/dp_info.h> 14 #include <asm/arch/dp.h> 15 #include <fdtdec.h> 16 #include <libfdt.h> 17 #include "exynos_dp_lowlevel.h" 18 19 /* Declare global data pointer */ 20 DECLARE_GLOBAL_DATA_PTR; 21 22 static void exynos_dp_enable_video_input(struct exynos_dp *dp_regs, 23 unsigned int enable) 24 { 25 unsigned int reg; 26 27 reg = readl(&dp_regs->video_ctl1); 28 reg &= ~VIDEO_EN_MASK; 29 30 /* enable video input */ 31 if (enable) 32 reg |= VIDEO_EN_MASK; 33 34 writel(reg, &dp_regs->video_ctl1); 35 36 return; 37 } 38 39 void exynos_dp_enable_video_bist(struct exynos_dp *dp_regs, unsigned int enable) 40 { 41 /* enable video bist */ 42 unsigned int reg; 43 44 reg = readl(&dp_regs->video_ctl4); 45 reg &= ~VIDEO_BIST_MASK; 46 47 /* enable video bist */ 48 if (enable) 49 reg |= VIDEO_BIST_MASK; 50 51 writel(reg, &dp_regs->video_ctl4); 52 53 return; 54 } 55 56 void exynos_dp_enable_video_mute(struct exynos_dp *dp_regs, unsigned int enable) 57 { 58 unsigned int reg; 59 60 reg = readl(&dp_regs->video_ctl1); 61 reg &= ~(VIDEO_MUTE_MASK); 62 if (enable) 63 reg |= VIDEO_MUTE_MASK; 64 65 writel(reg, &dp_regs->video_ctl1); 66 67 return; 68 } 69 70 71 static void exynos_dp_init_analog_param(struct exynos_dp *dp_regs) 72 { 73 unsigned int reg; 74 75 /* 76 * Set termination 77 * Normal bandgap, Normal swing, Tx terminal registor 61 ohm 78 * 24M Phy clock, TX digital logic power is 100:1.0625V 79 */ 80 reg = SEL_BG_NEW_BANDGAP | TX_TERMINAL_CTRL_61_OHM | 81 SWING_A_30PER_G_NORMAL; 82 writel(reg, &dp_regs->analog_ctl1); 83 84 reg = SEL_24M | TX_DVDD_BIT_1_0625V; 85 writel(reg, &dp_regs->analog_ctl2); 86 87 /* 88 * Set power source for internal clk driver to 1.0625v. 89 * Select current reference of TX driver current to 00:Ipp/2+Ic/2. 90 * Set VCO range of PLL +- 0uA 91 */ 92 reg = DRIVE_DVDD_BIT_1_0625V | SEL_CURRENT_DEFAULT | VCO_BIT_000_MICRO; 93 writel(reg, &dp_regs->analog_ctl3); 94 95 /* 96 * Set AUX TX terminal resistor to 102 ohm 97 * Set AUX channel amplitude control 98 */ 99 reg = PD_RING_OSC | AUX_TERMINAL_CTRL_52_OHM | TX_CUR1_2X | TX_CUR_4_MA; 100 writel(reg, &dp_regs->pll_filter_ctl1); 101 102 /* 103 * PLL loop filter bandwidth 104 * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz 105 * PLL digital power select: 1.2500V 106 */ 107 reg = CH3_AMP_0_MV | CH2_AMP_0_MV | CH1_AMP_0_MV | CH0_AMP_0_MV; 108 109 writel(reg, &dp_regs->amp_tuning_ctl); 110 111 /* 112 * PLL loop filter bandwidth 113 * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz 114 * PLL digital power select: 1.1250V 115 */ 116 reg = DP_PLL_LOOP_BIT_DEFAULT | DP_PLL_REF_BIT_1_1250V; 117 writel(reg, &dp_regs->pll_ctl); 118 } 119 120 static void exynos_dp_init_interrupt(struct exynos_dp *dp_regs) 121 { 122 /* Set interrupt registers to initial states */ 123 124 /* 125 * Disable interrupt 126 * INT pin assertion polarity. It must be configured 127 * correctly according to ICU setting. 128 * 1 = assert high, 0 = assert low 129 */ 130 writel(INT_POL, &dp_regs->int_ctl); 131 132 /* Clear pending registers */ 133 writel(0xff, &dp_regs->common_int_sta1); 134 writel(0xff, &dp_regs->common_int_sta2); 135 writel(0xff, &dp_regs->common_int_sta3); 136 writel(0xff, &dp_regs->common_int_sta4); 137 writel(0xff, &dp_regs->int_sta); 138 139 /* 0:mask,1: unmask */ 140 writel(0x00, &dp_regs->int_sta_mask1); 141 writel(0x00, &dp_regs->int_sta_mask2); 142 writel(0x00, &dp_regs->int_sta_mask3); 143 writel(0x00, &dp_regs->int_sta_mask4); 144 writel(0x00, &dp_regs->int_sta_mask); 145 } 146 147 void exynos_dp_reset(struct exynos_dp *dp_regs) 148 { 149 unsigned int reg_func_1; 150 151 /* dp tx sw reset */ 152 writel(RESET_DP_TX, &dp_regs->tx_sw_reset); 153 154 exynos_dp_enable_video_input(dp_regs, DP_DISABLE); 155 exynos_dp_enable_video_bist(dp_regs, DP_DISABLE); 156 exynos_dp_enable_video_mute(dp_regs, DP_DISABLE); 157 158 /* software reset */ 159 reg_func_1 = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N | 160 AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N | 161 HDCP_FUNC_EN_N | SW_FUNC_EN_N; 162 163 writel(reg_func_1, &dp_regs->func_en1); 164 writel(reg_func_1, &dp_regs->func_en2); 165 166 mdelay(1); 167 168 exynos_dp_init_analog_param(dp_regs); 169 exynos_dp_init_interrupt(dp_regs); 170 171 return; 172 } 173 174 void exynos_dp_enable_sw_func(struct exynos_dp *dp_regs, unsigned int enable) 175 { 176 unsigned int reg; 177 178 reg = readl(&dp_regs->func_en1); 179 reg &= ~(SW_FUNC_EN_N); 180 181 if (!enable) 182 reg |= SW_FUNC_EN_N; 183 184 writel(reg, &dp_regs->func_en1); 185 186 return; 187 } 188 189 unsigned int exynos_dp_set_analog_power_down(struct exynos_dp *dp_regs, 190 unsigned int block, u32 enable) 191 { 192 unsigned int reg; 193 194 reg = readl(&dp_regs->phy_pd); 195 switch (block) { 196 case AUX_BLOCK: 197 reg &= ~(AUX_PD); 198 if (enable) 199 reg |= AUX_PD; 200 break; 201 case CH0_BLOCK: 202 reg &= ~(CH0_PD); 203 if (enable) 204 reg |= CH0_PD; 205 break; 206 case CH1_BLOCK: 207 reg &= ~(CH1_PD); 208 if (enable) 209 reg |= CH1_PD; 210 break; 211 case CH2_BLOCK: 212 reg &= ~(CH2_PD); 213 if (enable) 214 reg |= CH2_PD; 215 break; 216 case CH3_BLOCK: 217 reg &= ~(CH3_PD); 218 if (enable) 219 reg |= CH3_PD; 220 break; 221 case ANALOG_TOTAL: 222 reg &= ~PHY_PD; 223 if (enable) 224 reg |= PHY_PD; 225 break; 226 case POWER_ALL: 227 reg &= ~(PHY_PD | AUX_PD | CH0_PD | CH1_PD | CH2_PD | 228 CH3_PD); 229 if (enable) 230 reg |= (PHY_PD | AUX_PD | CH0_PD | CH1_PD | 231 CH2_PD | CH3_PD); 232 break; 233 default: 234 printf("DP undefined block number : %d\n", block); 235 return -1; 236 } 237 238 writel(reg, &dp_regs->phy_pd); 239 240 return 0; 241 } 242 243 unsigned int exynos_dp_get_pll_lock_status(struct exynos_dp *dp_regs) 244 { 245 unsigned int reg; 246 247 reg = readl(&dp_regs->debug_ctl); 248 249 if (reg & PLL_LOCK) 250 return PLL_LOCKED; 251 else 252 return PLL_UNLOCKED; 253 } 254 255 static void exynos_dp_set_pll_power(struct exynos_dp *dp_regs, 256 unsigned int enable) 257 { 258 unsigned int reg; 259 260 reg = readl(&dp_regs->pll_ctl); 261 reg &= ~(DP_PLL_PD); 262 263 if (!enable) 264 reg |= DP_PLL_PD; 265 266 writel(reg, &dp_regs->pll_ctl); 267 } 268 269 int exynos_dp_init_analog_func(struct exynos_dp *dp_regs) 270 { 271 int ret = EXYNOS_DP_SUCCESS; 272 unsigned int retry_cnt = 10; 273 unsigned int reg; 274 275 /* Power On All Analog block */ 276 exynos_dp_set_analog_power_down(dp_regs, POWER_ALL, DP_DISABLE); 277 278 reg = PLL_LOCK_CHG; 279 writel(reg, &dp_regs->common_int_sta1); 280 281 reg = readl(&dp_regs->debug_ctl); 282 reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL); 283 writel(reg, &dp_regs->debug_ctl); 284 285 /* Assert DP PLL Reset */ 286 reg = readl(&dp_regs->pll_ctl); 287 reg |= DP_PLL_RESET; 288 writel(reg, &dp_regs->pll_ctl); 289 290 mdelay(1); 291 292 /* Deassert DP PLL Reset */ 293 reg = readl(&dp_regs->pll_ctl); 294 reg &= ~(DP_PLL_RESET); 295 writel(reg, &dp_regs->pll_ctl); 296 297 exynos_dp_set_pll_power(dp_regs, DP_ENABLE); 298 299 while (exynos_dp_get_pll_lock_status(dp_regs) == PLL_UNLOCKED) { 300 mdelay(1); 301 retry_cnt--; 302 if (retry_cnt == 0) { 303 printf("DP dp's pll lock failed : retry : %d\n", 304 retry_cnt); 305 return -EINVAL; 306 } 307 } 308 309 debug("dp's pll lock success(%d)\n", retry_cnt); 310 311 /* Enable Serdes FIFO function and Link symbol clock domain module */ 312 reg = readl(&dp_regs->func_en2); 313 reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N 314 | AUX_FUNC_EN_N); 315 writel(reg, &dp_regs->func_en2); 316 317 return ret; 318 } 319 320 void exynos_dp_init_hpd(struct exynos_dp *dp_regs) 321 { 322 unsigned int reg; 323 324 /* Clear interrupts related to Hot Plug Detect */ 325 reg = HOTPLUG_CHG | HPD_LOST | PLUG; 326 writel(reg, &dp_regs->common_int_sta4); 327 328 reg = INT_HPD; 329 writel(reg, &dp_regs->int_sta); 330 331 reg = readl(&dp_regs->sys_ctl3); 332 reg &= ~(F_HPD | HPD_CTRL); 333 writel(reg, &dp_regs->sys_ctl3); 334 335 return; 336 } 337 338 static inline void exynos_dp_reset_aux(struct exynos_dp *dp_regs) 339 { 340 unsigned int reg; 341 342 /* Disable AUX channel module */ 343 reg = readl(&dp_regs->func_en2); 344 reg |= AUX_FUNC_EN_N; 345 writel(reg, &dp_regs->func_en2); 346 347 return; 348 } 349 350 void exynos_dp_init_aux(struct exynos_dp *dp_regs) 351 { 352 unsigned int reg; 353 354 /* Clear interrupts related to AUX channel */ 355 reg = RPLY_RECEIV | AUX_ERR; 356 writel(reg, &dp_regs->int_sta); 357 358 exynos_dp_reset_aux(dp_regs); 359 360 /* Disable AUX transaction H/W retry */ 361 reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(3)| 362 AUX_HW_RETRY_INTERVAL_600_MICROSECONDS; 363 writel(reg, &dp_regs->aux_hw_retry_ctl); 364 365 /* Receive AUX Channel DEFER commands equal to DEFER_COUNT*64 */ 366 reg = DEFER_CTRL_EN | DEFER_COUNT(1); 367 writel(reg, &dp_regs->aux_ch_defer_ctl); 368 369 /* Enable AUX channel module */ 370 reg = readl(&dp_regs->func_en2); 371 reg &= ~AUX_FUNC_EN_N; 372 writel(reg, &dp_regs->func_en2); 373 374 return; 375 } 376 377 void exynos_dp_config_interrupt(struct exynos_dp *dp_regs) 378 { 379 unsigned int reg; 380 381 /* 0: mask, 1: unmask */ 382 reg = COMMON_INT_MASK_1; 383 writel(reg, &dp_regs->common_int_mask1); 384 385 reg = COMMON_INT_MASK_2; 386 writel(reg, &dp_regs->common_int_mask2); 387 388 reg = COMMON_INT_MASK_3; 389 writel(reg, &dp_regs->common_int_mask3); 390 391 reg = COMMON_INT_MASK_4; 392 writel(reg, &dp_regs->common_int_mask4); 393 394 reg = INT_STA_MASK; 395 writel(reg, &dp_regs->int_sta_mask); 396 397 return; 398 } 399 400 unsigned int exynos_dp_get_plug_in_status(struct exynos_dp *dp_regs) 401 { 402 unsigned int reg; 403 404 reg = readl(&dp_regs->sys_ctl3); 405 if (reg & HPD_STATUS) 406 return 0; 407 408 return -1; 409 } 410 411 unsigned int exynos_dp_detect_hpd(struct exynos_dp *dp_regs) 412 { 413 int timeout_loop = DP_TIMEOUT_LOOP_COUNT; 414 415 mdelay(2); 416 417 while (exynos_dp_get_plug_in_status(dp_regs) != 0) { 418 if (timeout_loop == 0) 419 return -EINVAL; 420 mdelay(10); 421 timeout_loop--; 422 } 423 424 return EXYNOS_DP_SUCCESS; 425 } 426 427 unsigned int exynos_dp_start_aux_transaction(struct exynos_dp *dp_regs) 428 { 429 unsigned int reg; 430 unsigned int ret = 0; 431 unsigned int retry_cnt; 432 433 /* Enable AUX CH operation */ 434 reg = readl(&dp_regs->aux_ch_ctl2); 435 reg |= AUX_EN; 436 writel(reg, &dp_regs->aux_ch_ctl2); 437 438 retry_cnt = 10; 439 while (retry_cnt) { 440 reg = readl(&dp_regs->int_sta); 441 if (!(reg & RPLY_RECEIV)) { 442 if (retry_cnt == 0) { 443 printf("DP Reply Timeout!!\n"); 444 ret = -EAGAIN; 445 return ret; 446 } 447 mdelay(1); 448 retry_cnt--; 449 } else 450 break; 451 } 452 453 /* Clear interrupt source for AUX CH command reply */ 454 writel(reg, &dp_regs->int_sta); 455 456 /* Clear interrupt source for AUX CH access error */ 457 reg = readl(&dp_regs->int_sta); 458 if (reg & AUX_ERR) { 459 printf("DP Aux Access Error\n"); 460 writel(AUX_ERR, &dp_regs->int_sta); 461 ret = -EAGAIN; 462 return ret; 463 } 464 465 /* Check AUX CH error access status */ 466 reg = readl(&dp_regs->aux_ch_sta); 467 if ((reg & AUX_STATUS_MASK) != 0) { 468 debug("DP AUX CH error happens: %x\n", reg & AUX_STATUS_MASK); 469 ret = -EAGAIN; 470 return ret; 471 } 472 473 return EXYNOS_DP_SUCCESS; 474 } 475 476 unsigned int exynos_dp_write_byte_to_dpcd(struct exynos_dp *dp_regs, 477 unsigned int reg_addr, 478 unsigned char data) 479 { 480 unsigned int reg, ret; 481 482 /* Clear AUX CH data buffer */ 483 reg = BUF_CLR; 484 writel(reg, &dp_regs->buffer_data_ctl); 485 486 /* Select DPCD device address */ 487 reg = AUX_ADDR_7_0(reg_addr); 488 writel(reg, &dp_regs->aux_addr_7_0); 489 reg = AUX_ADDR_15_8(reg_addr); 490 writel(reg, &dp_regs->aux_addr_15_8); 491 reg = AUX_ADDR_19_16(reg_addr); 492 writel(reg, &dp_regs->aux_addr_19_16); 493 494 /* Write data buffer */ 495 reg = (unsigned int)data; 496 writel(reg, &dp_regs->buf_data0); 497 498 /* 499 * Set DisplayPort transaction and write 1 byte 500 * If bit 3 is 1, DisplayPort transaction. 501 * If Bit 3 is 0, I2C transaction. 502 */ 503 reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; 504 writel(reg, &dp_regs->aux_ch_ctl1); 505 506 /* Start AUX transaction */ 507 ret = exynos_dp_start_aux_transaction(dp_regs); 508 if (ret != EXYNOS_DP_SUCCESS) { 509 printf("DP Aux transaction failed\n"); 510 return ret; 511 } 512 513 return ret; 514 } 515 516 unsigned int exynos_dp_read_byte_from_dpcd(struct exynos_dp *dp_regs, 517 unsigned int reg_addr, 518 unsigned char *data) 519 { 520 unsigned int reg; 521 int retval; 522 523 /* Clear AUX CH data buffer */ 524 reg = BUF_CLR; 525 writel(reg, &dp_regs->buffer_data_ctl); 526 527 /* Select DPCD device address */ 528 reg = AUX_ADDR_7_0(reg_addr); 529 writel(reg, &dp_regs->aux_addr_7_0); 530 reg = AUX_ADDR_15_8(reg_addr); 531 writel(reg, &dp_regs->aux_addr_15_8); 532 reg = AUX_ADDR_19_16(reg_addr); 533 writel(reg, &dp_regs->aux_addr_19_16); 534 535 /* 536 * Set DisplayPort transaction and read 1 byte 537 * If bit 3 is 1, DisplayPort transaction. 538 * If Bit 3 is 0, I2C transaction. 539 */ 540 reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; 541 writel(reg, &dp_regs->aux_ch_ctl1); 542 543 /* Start AUX transaction */ 544 retval = exynos_dp_start_aux_transaction(dp_regs); 545 if (!retval) 546 debug("DP Aux Transaction fail!\n"); 547 548 /* Read data buffer */ 549 reg = readl(&dp_regs->buf_data0); 550 *data = (unsigned char)(reg & 0xff); 551 552 return retval; 553 } 554 555 unsigned int exynos_dp_write_bytes_to_dpcd(struct exynos_dp *dp_regs, 556 unsigned int reg_addr, 557 unsigned int count, 558 unsigned char data[]) 559 { 560 unsigned int reg; 561 unsigned int start_offset; 562 unsigned int cur_data_count; 563 unsigned int cur_data_idx; 564 unsigned int retry_cnt; 565 unsigned int ret = 0; 566 567 /* Clear AUX CH data buffer */ 568 reg = BUF_CLR; 569 writel(reg, &dp_regs->buffer_data_ctl); 570 571 start_offset = 0; 572 while (start_offset < count) { 573 /* Buffer size of AUX CH is 16 * 4bytes */ 574 if ((count - start_offset) > 16) 575 cur_data_count = 16; 576 else 577 cur_data_count = count - start_offset; 578 579 retry_cnt = 5; 580 while (retry_cnt) { 581 /* Select DPCD device address */ 582 reg = AUX_ADDR_7_0(reg_addr + start_offset); 583 writel(reg, &dp_regs->aux_addr_7_0); 584 reg = AUX_ADDR_15_8(reg_addr + start_offset); 585 writel(reg, &dp_regs->aux_addr_15_8); 586 reg = AUX_ADDR_19_16(reg_addr + start_offset); 587 writel(reg, &dp_regs->aux_addr_19_16); 588 589 for (cur_data_idx = 0; cur_data_idx < cur_data_count; 590 cur_data_idx++) { 591 reg = data[start_offset + cur_data_idx]; 592 writel(reg, (unsigned int)&dp_regs->buf_data0 + 593 (4 * cur_data_idx)); 594 } 595 /* 596 * Set DisplayPort transaction and write 597 * If bit 3 is 1, DisplayPort transaction. 598 * If Bit 3 is 0, I2C transaction. 599 */ 600 reg = AUX_LENGTH(cur_data_count) | 601 AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; 602 writel(reg, &dp_regs->aux_ch_ctl1); 603 604 /* Start AUX transaction */ 605 ret = exynos_dp_start_aux_transaction(dp_regs); 606 if (ret != EXYNOS_DP_SUCCESS) { 607 if (retry_cnt == 0) { 608 printf("DP Aux Transaction failed\n"); 609 return ret; 610 } 611 retry_cnt--; 612 } else 613 break; 614 } 615 start_offset += cur_data_count; 616 } 617 618 return ret; 619 } 620 621 unsigned int exynos_dp_read_bytes_from_dpcd(struct exynos_dp *dp_regs, 622 unsigned int reg_addr, 623 unsigned int count, 624 unsigned char data[]) 625 { 626 unsigned int reg; 627 unsigned int start_offset; 628 unsigned int cur_data_count; 629 unsigned int cur_data_idx; 630 unsigned int retry_cnt; 631 unsigned int ret = 0; 632 633 /* Clear AUX CH data buffer */ 634 reg = BUF_CLR; 635 writel(reg, &dp_regs->buffer_data_ctl); 636 637 start_offset = 0; 638 while (start_offset < count) { 639 /* Buffer size of AUX CH is 16 * 4bytes */ 640 if ((count - start_offset) > 16) 641 cur_data_count = 16; 642 else 643 cur_data_count = count - start_offset; 644 645 retry_cnt = 5; 646 while (retry_cnt) { 647 /* Select DPCD device address */ 648 reg = AUX_ADDR_7_0(reg_addr + start_offset); 649 writel(reg, &dp_regs->aux_addr_7_0); 650 reg = AUX_ADDR_15_8(reg_addr + start_offset); 651 writel(reg, &dp_regs->aux_addr_15_8); 652 reg = AUX_ADDR_19_16(reg_addr + start_offset); 653 writel(reg, &dp_regs->aux_addr_19_16); 654 /* 655 * Set DisplayPort transaction and read 656 * If bit 3 is 1, DisplayPort transaction. 657 * If Bit 3 is 0, I2C transaction. 658 */ 659 reg = AUX_LENGTH(cur_data_count) | 660 AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; 661 writel(reg, &dp_regs->aux_ch_ctl1); 662 663 /* Start AUX transaction */ 664 ret = exynos_dp_start_aux_transaction(dp_regs); 665 if (ret != EXYNOS_DP_SUCCESS) { 666 if (retry_cnt == 0) { 667 printf("DP Aux Transaction failed\n"); 668 return ret; 669 } 670 retry_cnt--; 671 } else 672 break; 673 } 674 675 for (cur_data_idx = 0; cur_data_idx < cur_data_count; 676 cur_data_idx++) { 677 reg = readl((unsigned int)&dp_regs->buf_data0 + 678 4 * cur_data_idx); 679 data[start_offset + cur_data_idx] = (unsigned char)reg; 680 } 681 682 start_offset += cur_data_count; 683 } 684 685 return ret; 686 } 687 688 int exynos_dp_select_i2c_device(struct exynos_dp *dp_regs, 689 unsigned int device_addr, unsigned int reg_addr) 690 { 691 unsigned int reg; 692 int retval; 693 694 /* Set EDID device address */ 695 reg = device_addr; 696 writel(reg, &dp_regs->aux_addr_7_0); 697 writel(0x0, &dp_regs->aux_addr_15_8); 698 writel(0x0, &dp_regs->aux_addr_19_16); 699 700 /* Set offset from base address of EDID device */ 701 writel(reg_addr, &dp_regs->buf_data0); 702 703 /* 704 * Set I2C transaction and write address 705 * If bit 3 is 1, DisplayPort transaction. 706 * If Bit 3 is 0, I2C transaction. 707 */ 708 reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT | 709 AUX_TX_COMM_WRITE; 710 writel(reg, &dp_regs->aux_ch_ctl1); 711 712 /* Start AUX transaction */ 713 retval = exynos_dp_start_aux_transaction(dp_regs); 714 if (retval != 0) 715 printf("%s: DP Aux Transaction fail!\n", __func__); 716 717 return retval; 718 } 719 720 int exynos_dp_read_byte_from_i2c(struct exynos_dp *dp_regs, 721 unsigned int device_addr, 722 unsigned int reg_addr, unsigned int *data) 723 { 724 unsigned int reg; 725 int i; 726 int retval; 727 728 for (i = 0; i < 10; i++) { 729 /* Clear AUX CH data buffer */ 730 reg = BUF_CLR; 731 writel(reg, &dp_regs->buffer_data_ctl); 732 733 /* Select EDID device */ 734 retval = exynos_dp_select_i2c_device(dp_regs, device_addr, 735 reg_addr); 736 if (retval != 0) { 737 printf("DP Select EDID device fail. retry !\n"); 738 continue; 739 } 740 741 /* 742 * Set I2C transaction and read data 743 * If bit 3 is 1, DisplayPort transaction. 744 * If Bit 3 is 0, I2C transaction. 745 */ 746 reg = AUX_TX_COMM_I2C_TRANSACTION | 747 AUX_TX_COMM_READ; 748 writel(reg, &dp_regs->aux_ch_ctl1); 749 750 /* Start AUX transaction */ 751 retval = exynos_dp_start_aux_transaction(dp_regs); 752 if (retval != EXYNOS_DP_SUCCESS) 753 printf("%s: DP Aux Transaction fail!\n", __func__); 754 } 755 756 /* Read data */ 757 if (retval == 0) 758 *data = readl(&dp_regs->buf_data0); 759 760 return retval; 761 } 762 763 int exynos_dp_read_bytes_from_i2c(struct exynos_dp *dp_regs, 764 unsigned int device_addr, 765 unsigned int reg_addr, unsigned int count, 766 unsigned char edid[]) 767 { 768 unsigned int reg; 769 unsigned int i, j; 770 unsigned int cur_data_idx; 771 unsigned int defer = 0; 772 int retval = 0; 773 774 for (i = 0; i < count; i += 16) { /* use 16 burst */ 775 for (j = 0; j < 100; j++) { 776 /* Clear AUX CH data buffer */ 777 reg = BUF_CLR; 778 writel(reg, &dp_regs->buffer_data_ctl); 779 780 /* Set normal AUX CH command */ 781 reg = readl(&dp_regs->aux_ch_ctl2); 782 reg &= ~ADDR_ONLY; 783 writel(reg, &dp_regs->aux_ch_ctl2); 784 785 /* 786 * If Rx sends defer, Tx sends only reads 787 * request without sending addres 788 */ 789 if (!defer) 790 retval = exynos_dp_select_i2c_device( 791 dp_regs, device_addr, reg_addr + i); 792 else 793 defer = 0; 794 795 if (retval == EXYNOS_DP_SUCCESS) { 796 /* 797 * Set I2C transaction and write data 798 * If bit 3 is 1, DisplayPort transaction. 799 * If Bit 3 is 0, I2C transaction. 800 */ 801 reg = AUX_LENGTH(16) | 802 AUX_TX_COMM_I2C_TRANSACTION | 803 AUX_TX_COMM_READ; 804 writel(reg, &dp_regs->aux_ch_ctl1); 805 806 /* Start AUX transaction */ 807 retval = exynos_dp_start_aux_transaction( 808 dp_regs); 809 if (retval == 0) 810 break; 811 else 812 printf("DP Aux Transaction fail!\n"); 813 } 814 /* Check if Rx sends defer */ 815 reg = readl(&dp_regs->aux_rx_comm); 816 if (reg == AUX_RX_COMM_AUX_DEFER || 817 reg == AUX_RX_COMM_I2C_DEFER) { 818 printf("DP Defer: %d\n", reg); 819 defer = 1; 820 } 821 } 822 823 for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) { 824 reg = readl((unsigned int)&dp_regs->buf_data0 825 + 4 * cur_data_idx); 826 edid[i + cur_data_idx] = (unsigned char)reg; 827 } 828 } 829 830 return retval; 831 } 832 833 void exynos_dp_reset_macro(struct exynos_dp *dp_regs) 834 { 835 unsigned int reg; 836 837 reg = readl(&dp_regs->phy_test); 838 reg |= MACRO_RST; 839 writel(reg, &dp_regs->phy_test); 840 841 /* 10 us is the minimum Macro reset time. */ 842 mdelay(1); 843 844 reg &= ~MACRO_RST; 845 writel(reg, &dp_regs->phy_test); 846 } 847 848 void exynos_dp_set_link_bandwidth(struct exynos_dp *dp_regs, 849 unsigned char bwtype) 850 { 851 unsigned int reg; 852 853 reg = (unsigned int)bwtype; 854 855 /* Set bandwidth to 2.7G or 1.62G */ 856 if ((bwtype == DP_LANE_BW_1_62) || (bwtype == DP_LANE_BW_2_70)) 857 writel(reg, &dp_regs->link_bw_set); 858 } 859 860 unsigned char exynos_dp_get_link_bandwidth(struct exynos_dp *dp_regs) 861 { 862 unsigned char ret; 863 unsigned int reg; 864 865 reg = readl(&dp_regs->link_bw_set); 866 ret = (unsigned char)reg; 867 868 return ret; 869 } 870 871 void exynos_dp_set_lane_count(struct exynos_dp *dp_regs, unsigned char count) 872 { 873 unsigned int reg; 874 875 reg = (unsigned int)count; 876 877 if ((count == DP_LANE_CNT_1) || (count == DP_LANE_CNT_2) || 878 (count == DP_LANE_CNT_4)) 879 writel(reg, &dp_regs->lane_count_set); 880 } 881 882 unsigned int exynos_dp_get_lane_count(struct exynos_dp *dp_regs) 883 { 884 return readl(&dp_regs->lane_count_set); 885 } 886 887 unsigned char exynos_dp_get_lanex_pre_emphasis(struct exynos_dp *dp_regs, 888 unsigned char lanecnt) 889 { 890 unsigned int reg_list[DP_LANE_CNT_4] = { 891 (unsigned int)&dp_regs->ln0_link_training_ctl, 892 (unsigned int)&dp_regs->ln1_link_training_ctl, 893 (unsigned int)&dp_regs->ln2_link_training_ctl, 894 (unsigned int)&dp_regs->ln3_link_training_ctl, 895 }; 896 897 return readl(reg_list[lanecnt]); 898 } 899 900 void exynos_dp_set_lanex_pre_emphasis(struct exynos_dp *dp_regs, 901 unsigned char request_val, 902 unsigned char lanecnt) 903 { 904 unsigned int reg_list[DP_LANE_CNT_4] = { 905 (unsigned int)&dp_regs->ln0_link_training_ctl, 906 (unsigned int)&dp_regs->ln1_link_training_ctl, 907 (unsigned int)&dp_regs->ln2_link_training_ctl, 908 (unsigned int)&dp_regs->ln3_link_training_ctl, 909 }; 910 911 writel(request_val, reg_list[lanecnt]); 912 } 913 914 void exynos_dp_set_lane_pre_emphasis(struct exynos_dp *dp_regs, 915 unsigned int level, unsigned char lanecnt) 916 { 917 unsigned char i; 918 unsigned int reg; 919 unsigned int reg_list[DP_LANE_CNT_4] = { 920 (unsigned int)&dp_regs->ln0_link_training_ctl, 921 (unsigned int)&dp_regs->ln1_link_training_ctl, 922 (unsigned int)&dp_regs->ln2_link_training_ctl, 923 (unsigned int)&dp_regs->ln3_link_training_ctl, 924 }; 925 unsigned int reg_shift[DP_LANE_CNT_4] = { 926 PRE_EMPHASIS_SET_0_SHIFT, 927 PRE_EMPHASIS_SET_1_SHIFT, 928 PRE_EMPHASIS_SET_2_SHIFT, 929 PRE_EMPHASIS_SET_3_SHIFT 930 }; 931 932 for (i = 0; i < lanecnt; i++) { 933 reg = level << reg_shift[i]; 934 writel(reg, reg_list[i]); 935 } 936 } 937 938 void exynos_dp_set_training_pattern(struct exynos_dp *dp_regs, 939 unsigned int pattern) 940 { 941 unsigned int reg = 0; 942 943 switch (pattern) { 944 case PRBS7: 945 reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7; 946 break; 947 case D10_2: 948 reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2; 949 break; 950 case TRAINING_PTN1: 951 reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1; 952 break; 953 case TRAINING_PTN2: 954 reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2; 955 break; 956 case DP_NONE: 957 reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_DISABLE | 958 SW_TRAINING_PATTERN_SET_NORMAL; 959 break; 960 default: 961 break; 962 } 963 964 writel(reg, &dp_regs->training_ptn_set); 965 } 966 967 void exynos_dp_enable_enhanced_mode(struct exynos_dp *dp_regs, 968 unsigned char enable) 969 { 970 unsigned int reg; 971 972 reg = readl(&dp_regs->sys_ctl4); 973 reg &= ~ENHANCED; 974 975 if (enable) 976 reg |= ENHANCED; 977 978 writel(reg, &dp_regs->sys_ctl4); 979 } 980 981 void exynos_dp_enable_scrambling(struct exynos_dp *dp_regs, unsigned int enable) 982 { 983 unsigned int reg; 984 985 reg = readl(&dp_regs->training_ptn_set); 986 reg &= ~(SCRAMBLING_DISABLE); 987 988 if (!enable) 989 reg |= SCRAMBLING_DISABLE; 990 991 writel(reg, &dp_regs->training_ptn_set); 992 } 993 994 int exynos_dp_init_video(struct exynos_dp *dp_regs) 995 { 996 unsigned int reg; 997 998 /* Clear VID_CLK_CHG[1] and VID_FORMAT_CHG[3] and VSYNC_DET[7] */ 999 reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; 1000 writel(reg, &dp_regs->common_int_sta1); 1001 1002 /* I_STRM__CLK detect : DE_CTL : Auto detect */ 1003 reg &= ~DET_CTRL; 1004 writel(reg, &dp_regs->sys_ctl1); 1005 1006 return 0; 1007 } 1008 1009 void exynos_dp_config_video_slave_mode(struct exynos_dp *dp_regs, 1010 struct edp_video_info *video_info) 1011 { 1012 unsigned int reg; 1013 1014 /* Video Slave mode setting */ 1015 reg = readl(&dp_regs->func_en1); 1016 reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N); 1017 reg |= MASTER_VID_FUNC_EN_N; 1018 writel(reg, &dp_regs->func_en1); 1019 1020 /* Configure Interlaced for slave mode video */ 1021 reg = readl(&dp_regs->video_ctl10); 1022 reg &= ~INTERACE_SCAN_CFG; 1023 reg |= (video_info->interlaced << INTERACE_SCAN_CFG_SHIFT); 1024 writel(reg, &dp_regs->video_ctl10); 1025 1026 /* Configure V sync polarity for slave mode video */ 1027 reg = readl(&dp_regs->video_ctl10); 1028 reg &= ~VSYNC_POLARITY_CFG; 1029 reg |= (video_info->v_sync_polarity << V_S_POLARITY_CFG_SHIFT); 1030 writel(reg, &dp_regs->video_ctl10); 1031 1032 /* Configure H sync polarity for slave mode video */ 1033 reg = readl(&dp_regs->video_ctl10); 1034 reg &= ~HSYNC_POLARITY_CFG; 1035 reg |= (video_info->h_sync_polarity << H_S_POLARITY_CFG_SHIFT); 1036 writel(reg, &dp_regs->video_ctl10); 1037 1038 /* Set video mode to slave mode */ 1039 reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE; 1040 writel(reg, &dp_regs->soc_general_ctl); 1041 } 1042 1043 void exynos_dp_set_video_color_format(struct exynos_dp *dp_regs, 1044 struct edp_video_info *video_info) 1045 { 1046 unsigned int reg; 1047 1048 /* Configure the input color depth, color space, dynamic range */ 1049 reg = (video_info->dynamic_range << IN_D_RANGE_SHIFT) | 1050 (video_info->color_depth << IN_BPC_SHIFT) | 1051 (video_info->color_space << IN_COLOR_F_SHIFT); 1052 writel(reg, &dp_regs->video_ctl2); 1053 1054 /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ 1055 reg = readl(&dp_regs->video_ctl3); 1056 reg &= ~IN_YC_COEFFI_MASK; 1057 if (video_info->ycbcr_coeff) 1058 reg |= IN_YC_COEFFI_ITU709; 1059 else 1060 reg |= IN_YC_COEFFI_ITU601; 1061 writel(reg, &dp_regs->video_ctl3); 1062 } 1063 1064 int exynos_dp_config_video_bist(struct exynos_dp *dp_regs, 1065 struct exynos_dp_priv *priv) 1066 { 1067 unsigned int reg; 1068 unsigned int bist_type = 0; 1069 struct edp_video_info video_info = priv->video_info; 1070 1071 /* For master mode, you don't need to set the video format */ 1072 if (video_info.master_mode == 0) { 1073 writel(TOTAL_LINE_CFG_L(priv->disp_info.v_total), 1074 &dp_regs->total_ln_cfg_l); 1075 writel(TOTAL_LINE_CFG_H(priv->disp_info.v_total), 1076 &dp_regs->total_ln_cfg_h); 1077 writel(ACTIVE_LINE_CFG_L(priv->disp_info.v_res), 1078 &dp_regs->active_ln_cfg_l); 1079 writel(ACTIVE_LINE_CFG_H(priv->disp_info.v_res), 1080 &dp_regs->active_ln_cfg_h); 1081 writel(priv->disp_info.v_sync_width, &dp_regs->vsw_cfg); 1082 writel(priv->disp_info.v_back_porch, &dp_regs->vbp_cfg); 1083 writel(priv->disp_info.v_front_porch, &dp_regs->vfp_cfg); 1084 1085 writel(TOTAL_PIXEL_CFG_L(priv->disp_info.h_total), 1086 &dp_regs->total_pix_cfg_l); 1087 writel(TOTAL_PIXEL_CFG_H(priv->disp_info.h_total), 1088 &dp_regs->total_pix_cfg_h); 1089 writel(ACTIVE_PIXEL_CFG_L(priv->disp_info.h_res), 1090 &dp_regs->active_pix_cfg_l); 1091 writel(ACTIVE_PIXEL_CFG_H(priv->disp_info.h_res), 1092 &dp_regs->active_pix_cfg_h); 1093 writel(H_F_PORCH_CFG_L(priv->disp_info.h_front_porch), 1094 &dp_regs->hfp_cfg_l); 1095 writel(H_F_PORCH_CFG_H(priv->disp_info.h_front_porch), 1096 &dp_regs->hfp_cfg_h); 1097 writel(H_SYNC_PORCH_CFG_L(priv->disp_info.h_sync_width), 1098 &dp_regs->hsw_cfg_l); 1099 writel(H_SYNC_PORCH_CFG_H(priv->disp_info.h_sync_width), 1100 &dp_regs->hsw_cfg_h); 1101 writel(H_B_PORCH_CFG_L(priv->disp_info.h_back_porch), 1102 &dp_regs->hbp_cfg_l); 1103 writel(H_B_PORCH_CFG_H(priv->disp_info.h_back_porch), 1104 &dp_regs->hbp_cfg_h); 1105 1106 /* 1107 * Set SLAVE_I_SCAN_CFG[2], VSYNC_P_CFG[1], 1108 * HSYNC_P_CFG[0] properly 1109 */ 1110 reg = (video_info.interlaced << INTERACE_SCAN_CFG_SHIFT | 1111 video_info.v_sync_polarity << V_S_POLARITY_CFG_SHIFT | 1112 video_info.h_sync_polarity << H_S_POLARITY_CFG_SHIFT); 1113 writel(reg, &dp_regs->video_ctl10); 1114 } 1115 1116 /* BIST color bar width set--set to each bar is 32 pixel width */ 1117 switch (video_info.bist_pattern) { 1118 case COLORBAR_32: 1119 bist_type = BIST_WIDTH_BAR_32_PIXEL | 1120 BIST_TYPE_COLOR_BAR; 1121 break; 1122 case COLORBAR_64: 1123 bist_type = BIST_WIDTH_BAR_64_PIXEL | 1124 BIST_TYPE_COLOR_BAR; 1125 break; 1126 case WHITE_GRAY_BALCKBAR_32: 1127 bist_type = BIST_WIDTH_BAR_32_PIXEL | 1128 BIST_TYPE_WHITE_GRAY_BLACK_BAR; 1129 break; 1130 case WHITE_GRAY_BALCKBAR_64: 1131 bist_type = BIST_WIDTH_BAR_64_PIXEL | 1132 BIST_TYPE_WHITE_GRAY_BLACK_BAR; 1133 break; 1134 case MOBILE_WHITEBAR_32: 1135 bist_type = BIST_WIDTH_BAR_32_PIXEL | 1136 BIST_TYPE_MOBILE_WHITE_BAR; 1137 break; 1138 case MOBILE_WHITEBAR_64: 1139 bist_type = BIST_WIDTH_BAR_64_PIXEL | 1140 BIST_TYPE_MOBILE_WHITE_BAR; 1141 break; 1142 default: 1143 return -1; 1144 } 1145 1146 reg = bist_type; 1147 writel(reg, &dp_regs->video_ctl4); 1148 1149 return 0; 1150 } 1151 1152 unsigned int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp *dp_regs) 1153 { 1154 unsigned int reg; 1155 1156 /* Update Video stream clk detect status */ 1157 reg = readl(&dp_regs->sys_ctl1); 1158 writel(reg, &dp_regs->sys_ctl1); 1159 1160 reg = readl(&dp_regs->sys_ctl1); 1161 1162 if (!(reg & DET_STA)) { 1163 debug("DP Input stream clock not detected.\n"); 1164 return -EIO; 1165 } 1166 1167 return EXYNOS_DP_SUCCESS; 1168 } 1169 1170 void exynos_dp_set_video_cr_mn(struct exynos_dp *dp_regs, unsigned int type, 1171 unsigned int m_value, unsigned int n_value) 1172 { 1173 unsigned int reg; 1174 1175 if (type == REGISTER_M) { 1176 reg = readl(&dp_regs->sys_ctl4); 1177 reg |= FIX_M_VID; 1178 writel(reg, &dp_regs->sys_ctl4); 1179 reg = M_VID0_CFG(m_value); 1180 writel(reg, &dp_regs->m_vid0); 1181 reg = M_VID1_CFG(m_value); 1182 writel(reg, &dp_regs->m_vid1); 1183 reg = M_VID2_CFG(m_value); 1184 writel(reg, &dp_regs->m_vid2); 1185 1186 reg = N_VID0_CFG(n_value); 1187 writel(reg, &dp_regs->n_vid0); 1188 reg = N_VID1_CFG(n_value); 1189 writel(reg, &dp_regs->n_vid1); 1190 reg = N_VID2_CFG(n_value); 1191 writel(reg, &dp_regs->n_vid2); 1192 } else { 1193 reg = readl(&dp_regs->sys_ctl4); 1194 reg &= ~FIX_M_VID; 1195 writel(reg, &dp_regs->sys_ctl4); 1196 } 1197 } 1198 1199 void exynos_dp_set_video_timing_mode(struct exynos_dp *dp_regs, 1200 unsigned int type) 1201 { 1202 unsigned int reg; 1203 1204 reg = readl(&dp_regs->video_ctl10); 1205 reg &= ~FORMAT_SEL; 1206 1207 if (type != VIDEO_TIMING_FROM_CAPTURE) 1208 reg |= FORMAT_SEL; 1209 1210 writel(reg, &dp_regs->video_ctl10); 1211 } 1212 1213 void exynos_dp_enable_video_master(struct exynos_dp *dp_regs, 1214 unsigned int enable) 1215 { 1216 unsigned int reg; 1217 1218 reg = readl(&dp_regs->soc_general_ctl); 1219 if (enable) { 1220 reg &= ~VIDEO_MODE_MASK; 1221 reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE; 1222 } else { 1223 reg &= ~VIDEO_MODE_MASK; 1224 reg |= VIDEO_MODE_SLAVE_MODE; 1225 } 1226 1227 writel(reg, &dp_regs->soc_general_ctl); 1228 } 1229 1230 void exynos_dp_start_video(struct exynos_dp *dp_regs) 1231 { 1232 unsigned int reg; 1233 1234 /* Enable Video input and disable Mute */ 1235 reg = readl(&dp_regs->video_ctl1); 1236 reg |= VIDEO_EN; 1237 writel(reg, &dp_regs->video_ctl1); 1238 } 1239 1240 unsigned int exynos_dp_is_video_stream_on(struct exynos_dp *dp_regs) 1241 { 1242 unsigned int reg; 1243 1244 /* Update STRM_VALID */ 1245 reg = readl(&dp_regs->sys_ctl3); 1246 writel(reg, &dp_regs->sys_ctl3); 1247 1248 reg = readl(&dp_regs->sys_ctl3); 1249 if (!(reg & STRM_VALID)) 1250 return -EIO; 1251 1252 return EXYNOS_DP_SUCCESS; 1253 } 1254