1 /*
2  * Copyright (C) 2012 Samsung Electronics
3  *
4  * Author: Donghwa Lee <dh09.lee@samsung.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #include <common.h>
10 #include <dm.h>
11 #include <common.h>
12 #include <display.h>
13 #include <fdtdec.h>
14 #include <linux/libfdt.h>
15 #include <malloc.h>
16 #include <video_bridge.h>
17 #include <linux/compat.h>
18 #include <linux/err.h>
19 #include <asm/arch/clk.h>
20 #include <asm/arch/cpu.h>
21 #include <asm/arch/dp_info.h>
22 #include <asm/arch/dp.h>
23 #include <asm/arch/pinmux.h>
24 #include <asm/arch/power.h>
25 
26 #include "exynos_dp_lowlevel.h"
27 
28 DECLARE_GLOBAL_DATA_PTR;
29 
30 static void exynos_dp_disp_info(struct edp_disp_info *disp_info)
31 {
32 	disp_info->h_total = disp_info->h_res + disp_info->h_sync_width +
33 		disp_info->h_back_porch + disp_info->h_front_porch;
34 	disp_info->v_total = disp_info->v_res + disp_info->v_sync_width +
35 		disp_info->v_back_porch + disp_info->v_front_porch;
36 
37 	return;
38 }
39 
40 static int exynos_dp_init_dp(struct exynos_dp *regs)
41 {
42 	int ret;
43 	exynos_dp_reset(regs);
44 
45 	/* SW defined function Normal operation */
46 	exynos_dp_enable_sw_func(regs, DP_ENABLE);
47 
48 	ret = exynos_dp_init_analog_func(regs);
49 	if (ret != EXYNOS_DP_SUCCESS)
50 		return ret;
51 
52 	exynos_dp_init_hpd(regs);
53 	exynos_dp_init_aux(regs);
54 
55 	return ret;
56 }
57 
58 static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data)
59 {
60 	int i;
61 	unsigned char sum = 0;
62 
63 	for (i = 0; i < EDID_BLOCK_LENGTH; i++)
64 		sum = sum + edid_data[i];
65 
66 	return sum;
67 }
68 
69 static unsigned int exynos_dp_read_edid(struct exynos_dp *regs)
70 {
71 	unsigned char edid[EDID_BLOCK_LENGTH * 2];
72 	unsigned int extend_block = 0;
73 	unsigned char sum;
74 	unsigned char test_vector;
75 	int retval;
76 
77 	/*
78 	 * EDID device address is 0x50.
79 	 * However, if necessary, you must have set upper address
80 	 * into E-EDID in I2C device, 0x30.
81 	 */
82 
83 	/* Read Extension Flag, Number of 128-byte EDID extension blocks */
84 	exynos_dp_read_byte_from_i2c(regs, I2C_EDID_DEVICE_ADDR,
85 				     EDID_EXTENSION_FLAG, &extend_block);
86 
87 	if (extend_block > 0) {
88 		printf("DP EDID data includes a single extension!\n");
89 
90 		/* Read EDID data */
91 		retval = exynos_dp_read_bytes_from_i2c(regs,
92 						I2C_EDID_DEVICE_ADDR,
93 						EDID_HEADER_PATTERN,
94 						EDID_BLOCK_LENGTH,
95 						&edid[EDID_HEADER_PATTERN]);
96 		if (retval != 0) {
97 			printf("DP EDID Read failed!\n");
98 			return -1;
99 		}
100 		sum = exynos_dp_calc_edid_check_sum(edid);
101 		if (sum != 0) {
102 			printf("DP EDID bad checksum!\n");
103 			return -1;
104 		}
105 
106 		/* Read additional EDID data */
107 		retval = exynos_dp_read_bytes_from_i2c(regs,
108 				I2C_EDID_DEVICE_ADDR,
109 				EDID_BLOCK_LENGTH,
110 				EDID_BLOCK_LENGTH,
111 				&edid[EDID_BLOCK_LENGTH]);
112 		if (retval != 0) {
113 			printf("DP EDID Read failed!\n");
114 			return -1;
115 		}
116 		sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
117 		if (sum != 0) {
118 			printf("DP EDID bad checksum!\n");
119 			return -1;
120 		}
121 
122 		exynos_dp_read_byte_from_dpcd(regs, DPCD_TEST_REQUEST,
123 					      &test_vector);
124 		if (test_vector & DPCD_TEST_EDID_READ) {
125 			exynos_dp_write_byte_to_dpcd(regs,
126 				DPCD_TEST_EDID_CHECKSUM,
127 				edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
128 			exynos_dp_write_byte_to_dpcd(regs,
129 				DPCD_TEST_RESPONSE,
130 				DPCD_TEST_EDID_CHECKSUM_WRITE);
131 		}
132 	} else {
133 		debug("DP EDID data does not include any extensions.\n");
134 
135 		/* Read EDID data */
136 		retval = exynos_dp_read_bytes_from_i2c(regs,
137 				I2C_EDID_DEVICE_ADDR,
138 				EDID_HEADER_PATTERN,
139 				EDID_BLOCK_LENGTH,
140 				&edid[EDID_HEADER_PATTERN]);
141 
142 		if (retval != 0) {
143 			printf("DP EDID Read failed!\n");
144 			return -1;
145 		}
146 		sum = exynos_dp_calc_edid_check_sum(edid);
147 		if (sum != 0) {
148 			printf("DP EDID bad checksum!\n");
149 			return -1;
150 		}
151 
152 		exynos_dp_read_byte_from_dpcd(regs, DPCD_TEST_REQUEST,
153 			&test_vector);
154 		if (test_vector & DPCD_TEST_EDID_READ) {
155 			exynos_dp_write_byte_to_dpcd(regs,
156 				DPCD_TEST_EDID_CHECKSUM, edid[EDID_CHECKSUM]);
157 			exynos_dp_write_byte_to_dpcd(regs,
158 				DPCD_TEST_RESPONSE,
159 				DPCD_TEST_EDID_CHECKSUM_WRITE);
160 		}
161 	}
162 
163 	debug("DP EDID Read success!\n");
164 
165 	return 0;
166 }
167 
168 static unsigned int exynos_dp_handle_edid(struct exynos_dp *regs,
169 					  struct exynos_dp_priv *priv)
170 {
171 	unsigned char buf[12];
172 	unsigned int ret;
173 	unsigned char temp;
174 	unsigned char retry_cnt;
175 	unsigned char dpcd_rev[16];
176 	unsigned char lane_bw[16];
177 	unsigned char lane_cnt[16];
178 
179 	memset(dpcd_rev, 0, 16);
180 	memset(lane_bw, 0, 16);
181 	memset(lane_cnt, 0, 16);
182 	memset(buf, 0, 12);
183 
184 	retry_cnt = 5;
185 	while (retry_cnt) {
186 		/* Read DPCD 0x0000-0x000b */
187 		ret = exynos_dp_read_bytes_from_dpcd(regs, DPCD_DPCD_REV, 12,
188 						     buf);
189 		if (ret != EXYNOS_DP_SUCCESS) {
190 			if (retry_cnt == 0) {
191 				printf("DP read_byte_from_dpcd() failed\n");
192 				return ret;
193 			}
194 			retry_cnt--;
195 		} else
196 			break;
197 	}
198 
199 	/* */
200 	temp = buf[DPCD_DPCD_REV];
201 	if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11)
202 		priv->dpcd_rev = temp;
203 	else {
204 		printf("DP Wrong DPCD Rev : %x\n", temp);
205 		return -ENODEV;
206 	}
207 
208 	temp = buf[DPCD_MAX_LINK_RATE];
209 	if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70)
210 		priv->lane_bw = temp;
211 	else {
212 		printf("DP Wrong MAX LINK RATE : %x\n", temp);
213 		return -EINVAL;
214 	}
215 
216 	/* Refer VESA Display Port Standard Ver1.1a Page 120 */
217 	if (priv->dpcd_rev == DP_DPCD_REV_11) {
218 		temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f;
219 		if (buf[DPCD_MAX_LANE_COUNT] & 0x80)
220 			priv->dpcd_efc = 1;
221 		else
222 			priv->dpcd_efc = 0;
223 	} else {
224 		temp = buf[DPCD_MAX_LANE_COUNT];
225 		priv->dpcd_efc = 0;
226 	}
227 
228 	if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 ||
229 			temp == DP_LANE_CNT_4) {
230 		priv->lane_cnt = temp;
231 	} else {
232 		printf("DP Wrong MAX LANE COUNT : %x\n", temp);
233 		return -EINVAL;
234 	}
235 
236 	ret = exynos_dp_read_edid(regs);
237 	if (ret != EXYNOS_DP_SUCCESS) {
238 		printf("DP exynos_dp_read_edid() failed\n");
239 		return -EINVAL;
240 	}
241 
242 	return ret;
243 }
244 
245 static void exynos_dp_init_training(struct exynos_dp *regs)
246 {
247 	/*
248 	 * MACRO_RST must be applied after the PLL_LOCK to avoid
249 	 * the DP inter pair skew issue for at least 10 us
250 	 */
251 	exynos_dp_reset_macro(regs);
252 
253 	/* All DP analog module power up */
254 	exynos_dp_set_analog_power_down(regs, POWER_ALL, 0);
255 }
256 
257 static unsigned int exynos_dp_link_start(struct exynos_dp *regs,
258 					 struct exynos_dp_priv *priv)
259 {
260 	unsigned char buf[5];
261 	unsigned int ret = 0;
262 
263 	debug("DP: %s was called\n", __func__);
264 
265 	priv->lt_info.lt_status = DP_LT_CR;
266 	priv->lt_info.ep_loop = 0;
267 	priv->lt_info.cr_loop[0] = 0;
268 	priv->lt_info.cr_loop[1] = 0;
269 	priv->lt_info.cr_loop[2] = 0;
270 	priv->lt_info.cr_loop[3] = 0;
271 
272 		/* Set sink to D0 (Sink Not Ready) mode. */
273 	ret = exynos_dp_write_byte_to_dpcd(regs, DPCD_SINK_POWER_STATE,
274 					   DPCD_SET_POWER_STATE_D0);
275 	if (ret != EXYNOS_DP_SUCCESS) {
276 		printf("DP write_dpcd_byte failed\n");
277 		return ret;
278 	}
279 
280 	/* Set link rate and count as you want to establish */
281 	exynos_dp_set_link_bandwidth(regs, priv->lane_bw);
282 	exynos_dp_set_lane_count(regs, priv->lane_cnt);
283 
284 	/* Setup RX configuration */
285 	buf[0] = priv->lane_bw;
286 	buf[1] = priv->lane_cnt;
287 
288 	ret = exynos_dp_write_bytes_to_dpcd(regs, DPCD_LINK_BW_SET, 2, buf);
289 	if (ret != EXYNOS_DP_SUCCESS) {
290 		printf("DP write_dpcd_byte failed\n");
291 		return ret;
292 	}
293 
294 	exynos_dp_set_lane_pre_emphasis(regs, PRE_EMPHASIS_LEVEL_0,
295 			priv->lane_cnt);
296 
297 	/* Set training pattern 1 */
298 	exynos_dp_set_training_pattern(regs, TRAINING_PTN1);
299 
300 	/* Set RX training pattern */
301 	buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1;
302 
303 	buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
304 		DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
305 	buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
306 		DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
307 	buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
308 		DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
309 	buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
310 		DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
311 
312 	ret = exynos_dp_write_bytes_to_dpcd(regs, DPCD_TRAINING_PATTERN_SET,
313 					    5, buf);
314 	if (ret != EXYNOS_DP_SUCCESS) {
315 		printf("DP write_dpcd_byte failed\n");
316 		return ret;
317 	}
318 
319 	return ret;
320 }
321 
322 static unsigned int exynos_dp_training_pattern_dis(struct exynos_dp *regs)
323 {
324 	unsigned int ret = EXYNOS_DP_SUCCESS;
325 
326 	exynos_dp_set_training_pattern(regs, DP_NONE);
327 
328 	ret = exynos_dp_write_byte_to_dpcd(regs, DPCD_TRAINING_PATTERN_SET,
329 					   DPCD_TRAINING_PATTERN_DISABLED);
330 	if (ret != EXYNOS_DP_SUCCESS) {
331 		printf("DP request_link_training_req failed\n");
332 		return -EAGAIN;
333 	}
334 
335 	return ret;
336 }
337 
338 static unsigned int exynos_dp_enable_rx_to_enhanced_mode(
339 		struct exynos_dp *regs, unsigned char enable)
340 {
341 	unsigned char data;
342 	unsigned int ret = EXYNOS_DP_SUCCESS;
343 
344 	ret = exynos_dp_read_byte_from_dpcd(regs, DPCD_LANE_COUNT_SET,
345 					    &data);
346 	if (ret != EXYNOS_DP_SUCCESS) {
347 		printf("DP read_from_dpcd failed\n");
348 		return -EAGAIN;
349 	}
350 
351 	if (enable)
352 		data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data);
353 	else
354 		data = DPCD_LN_COUNT_SET(data);
355 
356 	ret = exynos_dp_write_byte_to_dpcd(regs, DPCD_LANE_COUNT_SET, data);
357 	if (ret != EXYNOS_DP_SUCCESS) {
358 			printf("DP write_to_dpcd failed\n");
359 			return -EAGAIN;
360 
361 	}
362 
363 	return ret;
364 }
365 
366 static unsigned int exynos_dp_set_enhanced_mode(struct exynos_dp *regs,
367 						unsigned char enhance_mode)
368 {
369 	unsigned int ret = EXYNOS_DP_SUCCESS;
370 
371 	ret = exynos_dp_enable_rx_to_enhanced_mode(regs, enhance_mode);
372 	if (ret != EXYNOS_DP_SUCCESS) {
373 		printf("DP rx_enhance_mode failed\n");
374 		return -EAGAIN;
375 	}
376 
377 	exynos_dp_enable_enhanced_mode(regs, enhance_mode);
378 
379 	return ret;
380 }
381 
382 static int exynos_dp_read_dpcd_lane_stat(struct exynos_dp *regs,
383 					 struct exynos_dp_priv *priv,
384 					 unsigned char *status)
385 {
386 	unsigned int ret, i;
387 	unsigned char buf[2];
388 	unsigned char lane_stat[DP_LANE_CNT_4] = {0,};
389 	unsigned char shift_val[DP_LANE_CNT_4] = {0,};
390 
391 	shift_val[0] = 0;
392 	shift_val[1] = 4;
393 	shift_val[2] = 0;
394 	shift_val[3] = 4;
395 
396 	ret = exynos_dp_read_bytes_from_dpcd(regs, DPCD_LANE0_1_STATUS, 2,
397 					     buf);
398 	if (ret != EXYNOS_DP_SUCCESS) {
399 		printf("DP read lane status failed\n");
400 		return ret;
401 	}
402 
403 	for (i = 0; i < priv->lane_cnt; i++) {
404 		lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f;
405 		if (lane_stat[0] != lane_stat[i]) {
406 			printf("Wrong lane status\n");
407 			return -EINVAL;
408 		}
409 	}
410 
411 	*status = lane_stat[0];
412 
413 	return ret;
414 }
415 
416 static unsigned int exynos_dp_read_dpcd_adj_req(struct exynos_dp *regs,
417 		unsigned char lane_num, unsigned char *sw, unsigned char *em)
418 {
419 	unsigned int ret = EXYNOS_DP_SUCCESS;
420 	unsigned char buf;
421 	unsigned int dpcd_addr;
422 	unsigned char shift_val[DP_LANE_CNT_4] = {0, 4, 0, 4};
423 
424 	/* lane_num value is used as array index, so this range 0 ~ 3 */
425 	dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2);
426 
427 	ret = exynos_dp_read_byte_from_dpcd(regs, dpcd_addr, &buf);
428 	if (ret != EXYNOS_DP_SUCCESS) {
429 		printf("DP read adjust request failed\n");
430 		return -EAGAIN;
431 	}
432 
433 	*sw = ((buf >> shift_val[lane_num]) & 0x03);
434 	*em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2;
435 
436 	return ret;
437 }
438 
439 static int exynos_dp_equalizer_err_link(struct exynos_dp *regs,
440 					struct exynos_dp_priv *priv)
441 {
442 	int ret;
443 
444 	ret = exynos_dp_training_pattern_dis(regs);
445 	if (ret != EXYNOS_DP_SUCCESS) {
446 		printf("DP training_pattern_disable() failed\n");
447 		priv->lt_info.lt_status = DP_LT_FAIL;
448 	}
449 
450 	ret = exynos_dp_set_enhanced_mode(regs, priv->dpcd_efc);
451 	if (ret != EXYNOS_DP_SUCCESS) {
452 		printf("DP set_enhanced_mode() failed\n");
453 		priv->lt_info.lt_status = DP_LT_FAIL;
454 	}
455 
456 	return ret;
457 }
458 
459 static int exynos_dp_reduce_link_rate(struct exynos_dp *regs,
460 				      struct exynos_dp_priv *priv)
461 {
462 	int ret;
463 
464 	if (priv->lane_bw == DP_LANE_BW_2_70) {
465 		priv->lane_bw = DP_LANE_BW_1_62;
466 		printf("DP Change lane bw to 1.62Gbps\n");
467 		priv->lt_info.lt_status = DP_LT_START;
468 		ret = EXYNOS_DP_SUCCESS;
469 	} else {
470 		ret = exynos_dp_training_pattern_dis(regs);
471 		if (ret != EXYNOS_DP_SUCCESS)
472 			printf("DP training_patter_disable() failed\n");
473 
474 		ret = exynos_dp_set_enhanced_mode(regs, priv->dpcd_efc);
475 		if (ret != EXYNOS_DP_SUCCESS)
476 			printf("DP set_enhanced_mode() failed\n");
477 
478 		priv->lt_info.lt_status = DP_LT_FAIL;
479 	}
480 
481 	return ret;
482 }
483 
484 static unsigned int exynos_dp_process_clock_recovery(struct exynos_dp *regs,
485 					struct exynos_dp_priv *priv)
486 {
487 	unsigned int ret = EXYNOS_DP_SUCCESS;
488 	unsigned char lane_stat;
489 	unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, };
490 	unsigned int i;
491 	unsigned char adj_req_sw;
492 	unsigned char adj_req_em;
493 	unsigned char buf[5];
494 
495 	debug("DP: %s was called\n", __func__);
496 	mdelay(1);
497 
498 	ret = exynos_dp_read_dpcd_lane_stat(regs, priv, &lane_stat);
499 	if (ret != EXYNOS_DP_SUCCESS) {
500 			printf("DP read lane status failed\n");
501 			priv->lt_info.lt_status = DP_LT_FAIL;
502 			return ret;
503 	}
504 
505 	if (lane_stat & DP_LANE_STAT_CR_DONE) {
506 		debug("DP clock Recovery training succeed\n");
507 		exynos_dp_set_training_pattern(regs, TRAINING_PTN2);
508 
509 		for (i = 0; i < priv->lane_cnt; i++) {
510 			ret = exynos_dp_read_dpcd_adj_req(regs, i,
511 						&adj_req_sw, &adj_req_em);
512 			if (ret != EXYNOS_DP_SUCCESS) {
513 				priv->lt_info.lt_status = DP_LT_FAIL;
514 				return ret;
515 			}
516 
517 			lt_ctl_val[i] = 0;
518 			lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
519 
520 			if ((adj_req_sw == VOLTAGE_LEVEL_3)
521 				|| (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
522 				lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 |
523 					MAX_PRE_EMPHASIS_REACH_3;
524 			}
525 			exynos_dp_set_lanex_pre_emphasis(regs,
526 							 lt_ctl_val[i], i);
527 		}
528 
529 		buf[0] =  DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2;
530 		buf[1] = lt_ctl_val[0];
531 		buf[2] = lt_ctl_val[1];
532 		buf[3] = lt_ctl_val[2];
533 		buf[4] = lt_ctl_val[3];
534 
535 		ret = exynos_dp_write_bytes_to_dpcd(regs,
536 				DPCD_TRAINING_PATTERN_SET, 5, buf);
537 		if (ret != EXYNOS_DP_SUCCESS) {
538 			printf("DP write training pattern1 failed\n");
539 			priv->lt_info.lt_status = DP_LT_FAIL;
540 			return ret;
541 		} else
542 			priv->lt_info.lt_status = DP_LT_ET;
543 	} else {
544 		for (i = 0; i < priv->lane_cnt; i++) {
545 			lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(
546 						regs, i);
547 				ret = exynos_dp_read_dpcd_adj_req(regs, i,
548 						&adj_req_sw, &adj_req_em);
549 			if (ret != EXYNOS_DP_SUCCESS) {
550 				printf("DP read adj req failed\n");
551 				priv->lt_info.lt_status = DP_LT_FAIL;
552 				return ret;
553 			}
554 
555 			if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
556 					(adj_req_em == PRE_EMPHASIS_LEVEL_3))
557 				ret = exynos_dp_reduce_link_rate(regs,
558 								 priv);
559 
560 			if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) ==
561 						adj_req_sw) &&
562 				(PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) ==
563 						adj_req_em)) {
564 				priv->lt_info.cr_loop[i]++;
565 				if (priv->lt_info.cr_loop[i] == MAX_CR_LOOP)
566 					ret = exynos_dp_reduce_link_rate(
567 							regs, priv);
568 			}
569 
570 			lt_ctl_val[i] = 0;
571 			lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
572 
573 			if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
574 					(adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
575 				lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 |
576 					MAX_PRE_EMPHASIS_REACH_3;
577 			}
578 			exynos_dp_set_lanex_pre_emphasis(regs,
579 							 lt_ctl_val[i], i);
580 		}
581 
582 		ret = exynos_dp_write_bytes_to_dpcd(regs,
583 				DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val);
584 		if (ret != EXYNOS_DP_SUCCESS) {
585 			printf("DP write training pattern2 failed\n");
586 			priv->lt_info.lt_status = DP_LT_FAIL;
587 			return ret;
588 		}
589 	}
590 
591 	return ret;
592 }
593 
594 static unsigned int exynos_dp_process_equalizer_training(
595 		struct exynos_dp *regs, struct exynos_dp_priv *priv)
596 {
597 	unsigned int ret = EXYNOS_DP_SUCCESS;
598 	unsigned char lane_stat, adj_req_sw, adj_req_em, i;
599 	unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,};
600 	unsigned char interlane_aligned = 0;
601 	unsigned char f_bw;
602 	unsigned char f_lane_cnt;
603 	unsigned char sink_stat;
604 
605 	mdelay(1);
606 
607 	ret = exynos_dp_read_dpcd_lane_stat(regs, priv, &lane_stat);
608 	if (ret != EXYNOS_DP_SUCCESS) {
609 		printf("DP read lane status failed\n");
610 		priv->lt_info.lt_status = DP_LT_FAIL;
611 		return ret;
612 	}
613 
614 	debug("DP lane stat : %x\n", lane_stat);
615 
616 	if (lane_stat & DP_LANE_STAT_CR_DONE) {
617 		ret = exynos_dp_read_byte_from_dpcd(regs,
618 						    DPCD_LN_ALIGN_UPDATED,
619 						    &sink_stat);
620 		if (ret != EXYNOS_DP_SUCCESS) {
621 			priv->lt_info.lt_status = DP_LT_FAIL;
622 
623 			return ret;
624 		}
625 
626 		interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE);
627 
628 		for (i = 0; i < priv->lane_cnt; i++) {
629 			ret = exynos_dp_read_dpcd_adj_req(regs, i,
630 					&adj_req_sw, &adj_req_em);
631 			if (ret != EXYNOS_DP_SUCCESS) {
632 				printf("DP read adj req 1 failed\n");
633 				priv->lt_info.lt_status = DP_LT_FAIL;
634 
635 				return ret;
636 			}
637 
638 			lt_ctl_val[i] = 0;
639 			lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
640 
641 			if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
642 				(adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
643 				lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3;
644 				lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3;
645 			}
646 		}
647 
648 		if (((lane_stat&DP_LANE_STAT_CE_DONE) &&
649 			(lane_stat&DP_LANE_STAT_SYM_LOCK))
650 			&& (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) {
651 			debug("DP Equalizer training succeed\n");
652 
653 			f_bw = exynos_dp_get_link_bandwidth(regs);
654 			f_lane_cnt = exynos_dp_get_lane_count(regs);
655 
656 			debug("DP final BandWidth : %x\n", f_bw);
657 			debug("DP final Lane Count : %x\n", f_lane_cnt);
658 
659 			priv->lt_info.lt_status = DP_LT_FINISHED;
660 
661 			exynos_dp_equalizer_err_link(regs, priv);
662 
663 		} else {
664 			priv->lt_info.ep_loop++;
665 
666 			if (priv->lt_info.ep_loop > MAX_EQ_LOOP) {
667 				if (priv->lane_bw == DP_LANE_BW_2_70) {
668 					ret = exynos_dp_reduce_link_rate(
669 							regs, priv);
670 				} else {
671 					priv->lt_info.lt_status =
672 								DP_LT_FAIL;
673 					exynos_dp_equalizer_err_link(regs,
674 								     priv);
675 				}
676 			} else {
677 				for (i = 0; i < priv->lane_cnt; i++)
678 					exynos_dp_set_lanex_pre_emphasis(
679 						regs, lt_ctl_val[i], i);
680 
681 				ret = exynos_dp_write_bytes_to_dpcd(regs,
682 						DPCD_TRAINING_LANE0_SET,
683 						4, lt_ctl_val);
684 				if (ret != EXYNOS_DP_SUCCESS) {
685 					printf("DP set lt pattern failed\n");
686 					priv->lt_info.lt_status =
687 								DP_LT_FAIL;
688 					exynos_dp_equalizer_err_link(regs,
689 								     priv);
690 				}
691 			}
692 		}
693 	} else if (priv->lane_bw == DP_LANE_BW_2_70) {
694 		ret = exynos_dp_reduce_link_rate(regs, priv);
695 	} else {
696 		priv->lt_info.lt_status = DP_LT_FAIL;
697 		exynos_dp_equalizer_err_link(regs, priv);
698 	}
699 
700 	return ret;
701 }
702 
703 static unsigned int exynos_dp_sw_link_training(struct exynos_dp *regs,
704 					       struct exynos_dp_priv *priv)
705 {
706 	unsigned int ret = 0;
707 	int training_finished;
708 
709 	/* Turn off unnecessary lane */
710 	if (priv->lane_cnt == 1)
711 		exynos_dp_set_analog_power_down(regs, CH1_BLOCK, 1);
712 
713 	training_finished = 0;
714 
715 	priv->lt_info.lt_status = DP_LT_START;
716 
717 	/* Process here */
718 	while (!training_finished) {
719 		switch (priv->lt_info.lt_status) {
720 		case DP_LT_START:
721 			ret = exynos_dp_link_start(regs, priv);
722 			if (ret != EXYNOS_DP_SUCCESS) {
723 				printf("DP LT:link start failed\n");
724 				return ret;
725 			}
726 			break;
727 		case DP_LT_CR:
728 			ret = exynos_dp_process_clock_recovery(regs,
729 							       priv);
730 			if (ret != EXYNOS_DP_SUCCESS) {
731 				printf("DP LT:clock recovery failed\n");
732 				return ret;
733 			}
734 			break;
735 		case DP_LT_ET:
736 			ret = exynos_dp_process_equalizer_training(regs,
737 								   priv);
738 			if (ret != EXYNOS_DP_SUCCESS) {
739 				printf("DP LT:equalizer training failed\n");
740 				return ret;
741 			}
742 			break;
743 		case DP_LT_FINISHED:
744 			training_finished = 1;
745 			break;
746 		case DP_LT_FAIL:
747 			return -1;
748 		}
749 	}
750 
751 	return ret;
752 }
753 
754 static unsigned int exynos_dp_set_link_train(struct exynos_dp *regs,
755 					     struct exynos_dp_priv *priv)
756 {
757 	unsigned int ret;
758 
759 	exynos_dp_init_training(regs);
760 
761 	ret = exynos_dp_sw_link_training(regs, priv);
762 	if (ret != EXYNOS_DP_SUCCESS)
763 		printf("DP dp_sw_link_training() failed\n");
764 
765 	return ret;
766 }
767 
768 static void exynos_dp_enable_scramble(struct exynos_dp *regs,
769 				      unsigned int enable)
770 {
771 	unsigned char data;
772 
773 	if (enable) {
774 		exynos_dp_enable_scrambling(regs, DP_ENABLE);
775 
776 		exynos_dp_read_byte_from_dpcd(regs,
777 					      DPCD_TRAINING_PATTERN_SET, &data);
778 		exynos_dp_write_byte_to_dpcd(regs, DPCD_TRAINING_PATTERN_SET,
779 			(u8)(data & ~DPCD_SCRAMBLING_DISABLED));
780 	} else {
781 		exynos_dp_enable_scrambling(regs, DP_DISABLE);
782 		exynos_dp_read_byte_from_dpcd(regs,
783 					      DPCD_TRAINING_PATTERN_SET, &data);
784 		exynos_dp_write_byte_to_dpcd(regs, DPCD_TRAINING_PATTERN_SET,
785 			(u8)(data | DPCD_SCRAMBLING_DISABLED));
786 	}
787 }
788 
789 static unsigned int exynos_dp_config_video(struct exynos_dp *regs,
790 					   struct exynos_dp_priv *priv)
791 {
792 	unsigned int ret = 0;
793 	unsigned int retry_cnt;
794 
795 	mdelay(1);
796 
797 	if (priv->video_info.master_mode) {
798 		printf("DP does not support master mode\n");
799 		return -ENODEV;
800 	} else {
801 		/* debug slave */
802 		exynos_dp_config_video_slave_mode(regs,
803 						  &priv->video_info);
804 	}
805 
806 	exynos_dp_set_video_color_format(regs, &priv->video_info);
807 
808 	if (priv->video_info.bist_mode) {
809 		if (exynos_dp_config_video_bist(regs, priv) != 0)
810 			return -1;
811 	}
812 
813 	ret = exynos_dp_get_pll_lock_status(regs);
814 	if (ret != PLL_LOCKED) {
815 		printf("DP PLL is not locked yet\n");
816 		return -EIO;
817 	}
818 
819 	if (priv->video_info.master_mode == 0) {
820 		retry_cnt = 10;
821 		while (retry_cnt) {
822 			ret = exynos_dp_is_slave_video_stream_clock_on(regs);
823 			if (ret != EXYNOS_DP_SUCCESS) {
824 				if (retry_cnt == 0) {
825 					printf("DP stream_clock_on failed\n");
826 					return ret;
827 				}
828 				retry_cnt--;
829 				mdelay(1);
830 			} else
831 				break;
832 		}
833 	}
834 
835 	/* Set to use the register calculated M/N video */
836 	exynos_dp_set_video_cr_mn(regs, CALCULATED_M, 0, 0);
837 
838 	/* For video bist, Video timing must be generated by register */
839 	exynos_dp_set_video_timing_mode(regs, VIDEO_TIMING_FROM_CAPTURE);
840 
841 	/* Enable video bist */
842 	if (priv->video_info.bist_pattern != COLOR_RAMP &&
843 		priv->video_info.bist_pattern != BALCK_WHITE_V_LINES &&
844 		priv->video_info.bist_pattern != COLOR_SQUARE)
845 		exynos_dp_enable_video_bist(regs,
846 					    priv->video_info.bist_mode);
847 	else
848 		exynos_dp_enable_video_bist(regs, DP_DISABLE);
849 
850 	/* Disable video mute */
851 	exynos_dp_enable_video_mute(regs, DP_DISABLE);
852 
853 	/* Configure video Master or Slave mode */
854 	exynos_dp_enable_video_master(regs,
855 				      priv->video_info.master_mode);
856 
857 	/* Enable video */
858 	exynos_dp_start_video(regs);
859 
860 	if (priv->video_info.master_mode == 0) {
861 		retry_cnt = 100;
862 		while (retry_cnt) {
863 			ret = exynos_dp_is_video_stream_on(regs);
864 			if (ret != EXYNOS_DP_SUCCESS) {
865 				if (retry_cnt == 0) {
866 					printf("DP Timeout of video stream\n");
867 					return ret;
868 				}
869 				retry_cnt--;
870 				mdelay(5);
871 			} else
872 				break;
873 		}
874 	}
875 
876 	return ret;
877 }
878 
879 static int exynos_dp_ofdata_to_platdata(struct udevice *dev)
880 {
881 	struct exynos_dp_priv *priv = dev_get_priv(dev);
882 	const void *blob = gd->fdt_blob;
883 	unsigned int node = dev_of_offset(dev);
884 	fdt_addr_t addr;
885 
886 	addr = devfdt_get_addr(dev);
887 	if (addr == FDT_ADDR_T_NONE) {
888 		debug("Can't get the DP base address\n");
889 		return -EINVAL;
890 	}
891 	priv->regs = (struct exynos_dp *)addr;
892 	priv->disp_info.h_res = fdtdec_get_int(blob, node,
893 							"samsung,h-res", 0);
894 	priv->disp_info.h_sync_width = fdtdec_get_int(blob, node,
895 						"samsung,h-sync-width", 0);
896 	priv->disp_info.h_back_porch = fdtdec_get_int(blob, node,
897 						"samsung,h-back-porch", 0);
898 	priv->disp_info.h_front_porch = fdtdec_get_int(blob, node,
899 						"samsung,h-front-porch", 0);
900 	priv->disp_info.v_res = fdtdec_get_int(blob, node,
901 						"samsung,v-res", 0);
902 	priv->disp_info.v_sync_width = fdtdec_get_int(blob, node,
903 						"samsung,v-sync-width", 0);
904 	priv->disp_info.v_back_porch = fdtdec_get_int(blob, node,
905 						"samsung,v-back-porch", 0);
906 	priv->disp_info.v_front_porch = fdtdec_get_int(blob, node,
907 						"samsung,v-front-porch", 0);
908 	priv->disp_info.v_sync_rate = fdtdec_get_int(blob, node,
909 						"samsung,v-sync-rate", 0);
910 
911 	priv->lt_info.lt_status = fdtdec_get_int(blob, node,
912 						"samsung,lt-status", 0);
913 
914 	priv->video_info.master_mode = fdtdec_get_int(blob, node,
915 						"samsung,master-mode", 0);
916 	priv->video_info.bist_mode = fdtdec_get_int(blob, node,
917 						"samsung,bist-mode", 0);
918 	priv->video_info.bist_pattern = fdtdec_get_int(blob, node,
919 						"samsung,bist-pattern", 0);
920 	priv->video_info.h_sync_polarity = fdtdec_get_int(blob, node,
921 						"samsung,h-sync-polarity", 0);
922 	priv->video_info.v_sync_polarity = fdtdec_get_int(blob, node,
923 						"samsung,v-sync-polarity", 0);
924 	priv->video_info.interlaced = fdtdec_get_int(blob, node,
925 						"samsung,interlaced", 0);
926 	priv->video_info.color_space = fdtdec_get_int(blob, node,
927 						"samsung,color-space", 0);
928 	priv->video_info.dynamic_range = fdtdec_get_int(blob, node,
929 						"samsung,dynamic-range", 0);
930 	priv->video_info.ycbcr_coeff = fdtdec_get_int(blob, node,
931 						"samsung,ycbcr-coeff", 0);
932 	priv->video_info.color_depth = fdtdec_get_int(blob, node,
933 						"samsung,color-depth", 0);
934 	return 0;
935 }
936 
937 static int exynos_dp_bridge_init(struct udevice *dev)
938 {
939 	const int max_tries = 10;
940 	int num_tries;
941 	int ret;
942 
943 	debug("%s\n", __func__);
944 	ret = video_bridge_attach(dev);
945 	if (ret) {
946 		debug("video bridge init failed: %d\n", ret);
947 		return ret;
948 	}
949 
950 	/*
951 	 * We need to wait for 90ms after bringing up the bridge since there
952 	 * is a phantom "high" on the HPD chip during its bootup.  The phantom
953 	 * high comes within 7ms of de-asserting PD and persists for at least
954 	 * 15ms.  The real high comes roughly 50ms after PD is de-asserted. The
955 	 * phantom high makes it hard for us to know when the NXP chip is up.
956 	 */
957 	mdelay(90);
958 
959 	for (num_tries = 0; num_tries < max_tries; num_tries++) {
960 		/* Check HPD. If it's high, or we don't have it, all is well */
961 		ret = video_bridge_check_attached(dev);
962 		if (!ret || ret == -ENOENT)
963 			return 0;
964 
965 		debug("%s: eDP bridge failed to come up; try %d of %d\n",
966 		      __func__, num_tries, max_tries);
967 	}
968 
969 	/* Immediately go into bridge reset if the hp line is not high */
970 	return -EIO;
971 }
972 
973 static int exynos_dp_bridge_setup(const void *blob)
974 {
975 	const int max_tries = 2;
976 	int num_tries;
977 	struct udevice *dev;
978 	int ret;
979 
980 	/* Configure I2C registers for Parade bridge */
981 	ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &dev);
982 	if (ret) {
983 		debug("video bridge init failed: %d\n", ret);
984 		return ret;
985 	}
986 
987 	if (strncmp(dev->driver->name, "parade", 6)) {
988 		/* Mux HPHPD to the special hotplug detect mode */
989 		exynos_pinmux_config(PERIPH_ID_DPHPD, 0);
990 	}
991 
992 	for (num_tries = 0; num_tries < max_tries; num_tries++) {
993 		ret = exynos_dp_bridge_init(dev);
994 		if (!ret)
995 			return 0;
996 		if (num_tries == max_tries - 1)
997 			break;
998 
999 		/*
1000 		* If we're here, the bridge chip failed to initialise.
1001 		* Power down the bridge in an attempt to reset.
1002 		*/
1003 		video_bridge_set_active(dev, false);
1004 
1005 		/*
1006 		* Arbitrarily wait 300ms here with DP_N low.  Don't know for
1007 		* sure how long we should wait, but we're being paranoid.
1008 		*/
1009 		mdelay(300);
1010 	}
1011 
1012 	return ret;
1013 }
1014 int exynos_dp_enable(struct udevice *dev, int panel_bpp,
1015 		     const struct display_timing *timing)
1016 {
1017 	struct exynos_dp_priv *priv = dev_get_priv(dev);
1018 	struct exynos_dp *regs = priv->regs;
1019 	unsigned int ret;
1020 
1021 	debug("%s: start\n", __func__);
1022 	exynos_dp_disp_info(&priv->disp_info);
1023 
1024 	ret = exynos_dp_bridge_setup(gd->fdt_blob);
1025 	if (ret && ret != -ENODEV)
1026 		printf("LCD bridge failed to enable: %d\n", ret);
1027 
1028 	exynos_dp_phy_ctrl(1);
1029 
1030 	ret = exynos_dp_init_dp(regs);
1031 	if (ret != EXYNOS_DP_SUCCESS) {
1032 		printf("DP exynos_dp_init_dp() failed\n");
1033 		return ret;
1034 	}
1035 
1036 	ret = exynos_dp_handle_edid(regs, priv);
1037 	if (ret != EXYNOS_DP_SUCCESS) {
1038 		printf("EDP handle_edid fail\n");
1039 		return ret;
1040 	}
1041 
1042 	ret = exynos_dp_set_link_train(regs, priv);
1043 	if (ret != EXYNOS_DP_SUCCESS) {
1044 		printf("DP link training fail\n");
1045 		return ret;
1046 	}
1047 
1048 	exynos_dp_enable_scramble(regs, DP_ENABLE);
1049 	exynos_dp_enable_rx_to_enhanced_mode(regs, DP_ENABLE);
1050 	exynos_dp_enable_enhanced_mode(regs, DP_ENABLE);
1051 
1052 	exynos_dp_set_link_bandwidth(regs, priv->lane_bw);
1053 	exynos_dp_set_lane_count(regs, priv->lane_cnt);
1054 
1055 	exynos_dp_init_video(regs);
1056 	ret = exynos_dp_config_video(regs, priv);
1057 	if (ret != EXYNOS_DP_SUCCESS) {
1058 		printf("Exynos DP init failed\n");
1059 		return ret;
1060 	}
1061 
1062 	debug("Exynos DP init done\n");
1063 
1064 	return ret;
1065 }
1066 
1067 
1068 static const struct dm_display_ops exynos_dp_ops = {
1069 	.enable = exynos_dp_enable,
1070 };
1071 
1072 static const struct udevice_id exynos_dp_ids[] = {
1073 	{ .compatible = "samsung,exynos5-dp" },
1074 	{ }
1075 };
1076 
1077 U_BOOT_DRIVER(exynos_dp) = {
1078 	.name	= "exynos_dp",
1079 	.id	= UCLASS_DISPLAY,
1080 	.of_match = exynos_dp_ids,
1081 	.ops	= &exynos_dp_ops,
1082 	.ofdata_to_platdata	= exynos_dp_ofdata_to_platdata,
1083 	.priv_auto_alloc_size	= sizeof(struct exynos_dp_priv),
1084 };
1085