1 /* 2 * Porting to u-boot: 3 * 4 * (C) Copyright 2011 5 * Stefano Babic, DENX Software Engineering, sbabic@denx.de. 6 * 7 * Copyright (C) 2008-2009 MontaVista Software Inc. 8 * Copyright (C) 2008-2009 Texas Instruments Inc 9 * 10 * Based on the LCD driver for TI Avalanche processors written by 11 * Ajay Singh and Shalom Hai. 12 * 13 * SPDX-License-Identifier: GPL-2.0+ 14 */ 15 16 #include <common.h> 17 #include <memalign.h> 18 #include <video_fb.h> 19 #include <linux/list.h> 20 #include <linux/fb.h> 21 22 #include <linux/errno.h> 23 #include <asm/io.h> 24 #include <asm/arch/hardware.h> 25 26 #include "videomodes.h" 27 #include "da8xx-fb.h" 28 29 #if !defined(DA8XX_LCD_CNTL_BASE) 30 #define DA8XX_LCD_CNTL_BASE DAVINCI_LCD_CNTL_BASE 31 #endif 32 33 #define DRIVER_NAME "da8xx_lcdc" 34 35 #define LCD_VERSION_1 1 36 #define LCD_VERSION_2 2 37 38 /* LCD Status Register */ 39 #define LCD_END_OF_FRAME1 (1 << 9) 40 #define LCD_END_OF_FRAME0 (1 << 8) 41 #define LCD_PL_LOAD_DONE (1 << 6) 42 #define LCD_FIFO_UNDERFLOW (1 << 5) 43 #define LCD_SYNC_LOST (1 << 2) 44 45 /* LCD DMA Control Register */ 46 #define LCD_DMA_BURST_SIZE(x) ((x) << 4) 47 #define LCD_DMA_BURST_1 0x0 48 #define LCD_DMA_BURST_2 0x1 49 #define LCD_DMA_BURST_4 0x2 50 #define LCD_DMA_BURST_8 0x3 51 #define LCD_DMA_BURST_16 0x4 52 #define LCD_V1_END_OF_FRAME_INT_ENA (1 << 2) 53 #define LCD_V2_END_OF_FRAME0_INT_ENA (1 << 8) 54 #define LCD_V2_END_OF_FRAME1_INT_ENA (1 << 9) 55 #define LCD_DUAL_FRAME_BUFFER_ENABLE (1 << 0) 56 57 #define LCD_V2_TFT_24BPP_MODE (1 << 25) 58 #define LCD_V2_TFT_24BPP_UNPACK (1 << 26) 59 60 /* LCD Control Register */ 61 #define LCD_CLK_DIVISOR(x) ((x) << 8) 62 #define LCD_RASTER_MODE 0x01 63 64 /* LCD Raster Control Register */ 65 #define LCD_PALETTE_LOAD_MODE(x) ((x) << 20) 66 #define PALETTE_AND_DATA 0x00 67 #define PALETTE_ONLY 0x01 68 #define DATA_ONLY 0x02 69 70 #define LCD_MONO_8BIT_MODE (1 << 9) 71 #define LCD_RASTER_ORDER (1 << 8) 72 #define LCD_TFT_MODE (1 << 7) 73 #define LCD_V1_UNDERFLOW_INT_ENA (1 << 6) 74 #define LCD_V2_UNDERFLOW_INT_ENA (1 << 5) 75 #define LCD_V1_PL_INT_ENA (1 << 4) 76 #define LCD_V2_PL_INT_ENA (1 << 6) 77 #define LCD_MONOCHROME_MODE (1 << 1) 78 #define LCD_RASTER_ENABLE (1 << 0) 79 #define LCD_TFT_ALT_ENABLE (1 << 23) 80 #define LCD_STN_565_ENABLE (1 << 24) 81 #define LCD_V2_DMA_CLK_EN (1 << 2) 82 #define LCD_V2_LIDD_CLK_EN (1 << 1) 83 #define LCD_V2_CORE_CLK_EN (1 << 0) 84 #define LCD_V2_LPP_B10 26 85 #define LCD_V2_TFT_24BPP_MODE (1 << 25) 86 #define LCD_V2_TFT_24BPP_UNPACK (1 << 26) 87 88 /* LCD Raster Timing 2 Register */ 89 #define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16) 90 #define LCD_AC_BIAS_FREQUENCY(x) ((x) << 8) 91 #define LCD_SYNC_CTRL (1 << 25) 92 #define LCD_SYNC_EDGE (1 << 24) 93 #define LCD_INVERT_PIXEL_CLOCK (1 << 22) 94 #define LCD_INVERT_LINE_CLOCK (1 << 21) 95 #define LCD_INVERT_FRAME_CLOCK (1 << 20) 96 97 /* Clock registers available only on Version 2 */ 98 #define LCD_CLK_MAIN_RESET (1 << 3) 99 /* LCD Block */ 100 struct da8xx_lcd_regs { 101 u32 revid; 102 u32 ctrl; 103 u32 stat; 104 u32 lidd_ctrl; 105 u32 lidd_cs0_conf; 106 u32 lidd_cs0_addr; 107 u32 lidd_cs0_data; 108 u32 lidd_cs1_conf; 109 u32 lidd_cs1_addr; 110 u32 lidd_cs1_data; 111 u32 raster_ctrl; 112 u32 raster_timing_0; 113 u32 raster_timing_1; 114 u32 raster_timing_2; 115 u32 raster_subpanel; 116 u32 reserved; 117 u32 dma_ctrl; 118 u32 dma_frm_buf_base_addr_0; 119 u32 dma_frm_buf_ceiling_addr_0; 120 u32 dma_frm_buf_base_addr_1; 121 u32 dma_frm_buf_ceiling_addr_1; 122 u32 resv1; 123 u32 raw_stat; 124 u32 masked_stat; 125 u32 int_ena_set; 126 u32 int_ena_clr; 127 u32 end_of_int_ind; 128 /* Clock registers available only on Version 2 */ 129 u32 clk_ena; 130 u32 clk_reset; 131 }; 132 133 #define LCD_NUM_BUFFERS 1 134 135 #define WSI_TIMEOUT 50 136 #define PALETTE_SIZE 256 137 #define LEFT_MARGIN 64 138 #define RIGHT_MARGIN 64 139 #define UPPER_MARGIN 32 140 #define LOWER_MARGIN 32 141 #define WAIT_FOR_FRAME_DONE true 142 #define NO_WAIT_FOR_FRAME_DONE false 143 144 #define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP) 145 146 static struct da8xx_lcd_regs *da8xx_fb_reg_base; 147 148 DECLARE_GLOBAL_DATA_PTR; 149 150 /* graphics setup */ 151 static GraphicDevice gpanel; 152 static const struct da8xx_panel *lcd_panel; 153 static struct fb_info *da8xx_fb_info; 154 static int bits_x_pixel; 155 static unsigned int lcd_revision; 156 const struct lcd_ctrl_config *da8xx_lcd_cfg; 157 158 static inline unsigned int lcdc_read(u32 *addr) 159 { 160 return (unsigned int)readl(addr); 161 } 162 163 static inline void lcdc_write(unsigned int val, u32 *addr) 164 { 165 writel(val, addr); 166 } 167 168 struct da8xx_fb_par { 169 u32 p_palette_base; 170 unsigned char *v_palette_base; 171 dma_addr_t vram_phys; 172 unsigned long vram_size; 173 void *vram_virt; 174 unsigned int dma_start; 175 unsigned int dma_end; 176 struct clk *lcdc_clk; 177 int irq; 178 unsigned short pseudo_palette[16]; 179 unsigned int palette_sz; 180 unsigned int pxl_clk; 181 int blank; 182 int vsync_flag; 183 int vsync_timeout; 184 }; 185 186 187 /* Variable Screen Information */ 188 static struct fb_var_screeninfo da8xx_fb_var = { 189 .xoffset = 0, 190 .yoffset = 0, 191 .transp = {0, 0, 0}, 192 .nonstd = 0, 193 .activate = 0, 194 .height = -1, 195 .width = -1, 196 .pixclock = 46666, /* 46us - AUO display */ 197 .accel_flags = 0, 198 .left_margin = LEFT_MARGIN, 199 .right_margin = RIGHT_MARGIN, 200 .upper_margin = UPPER_MARGIN, 201 .lower_margin = LOWER_MARGIN, 202 .sync = 0, 203 .vmode = FB_VMODE_NONINTERLACED 204 }; 205 206 static struct fb_fix_screeninfo da8xx_fb_fix = { 207 .id = "DA8xx FB Drv", 208 .type = FB_TYPE_PACKED_PIXELS, 209 .type_aux = 0, 210 .visual = FB_VISUAL_PSEUDOCOLOR, 211 .xpanstep = 0, 212 .ypanstep = 1, 213 .ywrapstep = 0, 214 .accel = FB_ACCEL_NONE 215 }; 216 217 /* Enable the Raster Engine of the LCD Controller */ 218 static inline void lcd_enable_raster(void) 219 { 220 u32 reg; 221 222 /* Put LCDC in reset for several cycles */ 223 if (lcd_revision == LCD_VERSION_2) 224 lcdc_write(LCD_CLK_MAIN_RESET, 225 &da8xx_fb_reg_base->clk_reset); 226 227 udelay(1000); 228 /* Bring LCDC out of reset */ 229 if (lcd_revision == LCD_VERSION_2) 230 lcdc_write(0, 231 &da8xx_fb_reg_base->clk_reset); 232 233 udelay(1000); 234 235 reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); 236 if (!(reg & LCD_RASTER_ENABLE)) 237 lcdc_write(reg | LCD_RASTER_ENABLE, 238 &da8xx_fb_reg_base->raster_ctrl); 239 } 240 241 /* Disable the Raster Engine of the LCD Controller */ 242 static inline void lcd_disable_raster(bool wait_for_frame_done) 243 { 244 u32 reg; 245 u32 loop_cnt = 0; 246 u32 stat; 247 u32 i = 0; 248 249 if (wait_for_frame_done) 250 loop_cnt = 5000; 251 252 reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); 253 if (reg & LCD_RASTER_ENABLE) 254 lcdc_write(reg & ~LCD_RASTER_ENABLE, 255 &da8xx_fb_reg_base->raster_ctrl); 256 257 /* Wait for the current frame to complete */ 258 do { 259 if (lcd_revision == LCD_VERSION_1) 260 stat = lcdc_read(&da8xx_fb_reg_base->stat); 261 else 262 stat = lcdc_read(&da8xx_fb_reg_base->raw_stat); 263 264 mdelay(1); 265 } while (!(stat & 0x01) && (i++ < loop_cnt)); 266 267 if (lcd_revision == LCD_VERSION_1) 268 lcdc_write(stat, &da8xx_fb_reg_base->stat); 269 else 270 lcdc_write(stat, &da8xx_fb_reg_base->raw_stat); 271 272 if ((loop_cnt != 0) && (i >= loop_cnt)) { 273 printf("LCD Controller timed out\n"); 274 return; 275 } 276 } 277 278 static void lcd_blit(int load_mode, struct da8xx_fb_par *par) 279 { 280 u32 start; 281 u32 end; 282 u32 reg_ras; 283 u32 reg_dma; 284 u32 reg_int; 285 286 /* init reg to clear PLM (loading mode) fields */ 287 reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); 288 reg_ras &= ~(3 << 20); 289 290 reg_dma = lcdc_read(&da8xx_fb_reg_base->dma_ctrl); 291 292 if (load_mode == LOAD_DATA) { 293 start = par->dma_start; 294 end = par->dma_end; 295 296 reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY); 297 if (lcd_revision == LCD_VERSION_1) { 298 reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA; 299 } else { 300 reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | 301 LCD_V2_END_OF_FRAME0_INT_ENA | 302 LCD_V2_END_OF_FRAME1_INT_ENA | 303 LCD_V2_UNDERFLOW_INT_ENA | LCD_SYNC_LOST; 304 lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); 305 } 306 307 #if (LCD_NUM_BUFFERS == 2) 308 reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; 309 lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); 310 lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); 311 lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1); 312 lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); 313 #else 314 reg_dma &= ~LCD_DUAL_FRAME_BUFFER_ENABLE; 315 lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); 316 lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); 317 lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1); 318 lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); 319 #endif 320 321 } else if (load_mode == LOAD_PALETTE) { 322 start = par->p_palette_base; 323 end = start + par->palette_sz - 1; 324 325 reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); 326 if (lcd_revision == LCD_VERSION_1) { 327 reg_ras |= LCD_V1_PL_INT_ENA; 328 } else { 329 reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | 330 LCD_V2_PL_INT_ENA; 331 lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); 332 } 333 334 lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); 335 lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); 336 } 337 338 lcdc_write(reg_dma, &da8xx_fb_reg_base->dma_ctrl); 339 lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl); 340 341 /* 342 * The Raster enable bit must be set after all other control fields are 343 * set. 344 */ 345 lcd_enable_raster(); 346 } 347 348 /* Configure the Burst Size of DMA */ 349 static int lcd_cfg_dma(int burst_size) 350 { 351 u32 reg; 352 353 reg = lcdc_read(&da8xx_fb_reg_base->dma_ctrl) & 0x00000001; 354 switch (burst_size) { 355 case 1: 356 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1); 357 break; 358 case 2: 359 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2); 360 break; 361 case 4: 362 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4); 363 break; 364 case 8: 365 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8); 366 break; 367 case 16: 368 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16); 369 break; 370 default: 371 return -EINVAL; 372 } 373 lcdc_write(reg, &da8xx_fb_reg_base->dma_ctrl); 374 375 return 0; 376 } 377 378 static void lcd_cfg_ac_bias(int period, int transitions_per_int) 379 { 380 u32 reg; 381 382 /* Set the AC Bias Period and Number of Transitions per Interrupt */ 383 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 0xFFF00000; 384 reg |= LCD_AC_BIAS_FREQUENCY(period) | 385 LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int); 386 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2); 387 } 388 389 static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width, 390 int front_porch) 391 { 392 u32 reg; 393 394 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0) & 0xf; 395 reg |= ((back_porch & 0xff) << 24) 396 | ((front_porch & 0xff) << 16) 397 | ((pulse_width & 0x3f) << 10); 398 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0); 399 } 400 401 static void lcd_cfg_vertical_sync(int back_porch, int pulse_width, 402 int front_porch) 403 { 404 u32 reg; 405 406 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1) & 0x3ff; 407 reg |= ((back_porch & 0xff) << 24) 408 | ((front_porch & 0xff) << 16) 409 | ((pulse_width & 0x3f) << 10); 410 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1); 411 } 412 413 static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) 414 { 415 u32 reg; 416 u32 reg_int; 417 418 reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE | 419 LCD_MONO_8BIT_MODE | 420 LCD_MONOCHROME_MODE); 421 422 switch (cfg->p_disp_panel->panel_shade) { 423 case MONOCHROME: 424 reg |= LCD_MONOCHROME_MODE; 425 if (cfg->mono_8bit_mode) 426 reg |= LCD_MONO_8BIT_MODE; 427 break; 428 case COLOR_ACTIVE: 429 reg |= LCD_TFT_MODE; 430 if (cfg->tft_alt_mode) 431 reg |= LCD_TFT_ALT_ENABLE; 432 break; 433 434 case COLOR_PASSIVE: 435 if (cfg->stn_565_mode) 436 reg |= LCD_STN_565_ENABLE; 437 break; 438 439 default: 440 return -EINVAL; 441 } 442 443 /* enable additional interrupts here */ 444 if (lcd_revision == LCD_VERSION_1) { 445 reg |= LCD_V1_UNDERFLOW_INT_ENA; 446 } else { 447 reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | 448 LCD_V2_UNDERFLOW_INT_ENA; 449 lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); 450 } 451 452 lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); 453 454 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2); 455 456 if (cfg->sync_ctrl) 457 reg |= LCD_SYNC_CTRL; 458 else 459 reg &= ~LCD_SYNC_CTRL; 460 461 if (cfg->sync_edge) 462 reg |= LCD_SYNC_EDGE; 463 else 464 reg &= ~LCD_SYNC_EDGE; 465 466 if (cfg->invert_line_clock) 467 reg |= LCD_INVERT_LINE_CLOCK; 468 else 469 reg &= ~LCD_INVERT_LINE_CLOCK; 470 471 if (cfg->invert_frm_clock) 472 reg |= LCD_INVERT_FRAME_CLOCK; 473 else 474 reg &= ~LCD_INVERT_FRAME_CLOCK; 475 476 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2); 477 478 return 0; 479 } 480 481 static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, 482 u32 bpp, u32 raster_order) 483 { 484 u32 reg; 485 486 /* Set the Panel Width */ 487 /* Pixels per line = (PPL + 1)*16 */ 488 if (lcd_revision == LCD_VERSION_1) { 489 /* 490 * 0x3F in bits 4..9 gives max horizontal resolution = 1024 491 * pixels 492 */ 493 width &= 0x3f0; 494 } else { 495 /* 496 * 0x7F in bits 4..10 gives max horizontal resolution = 2048 497 * pixels. 498 */ 499 width &= 0x7f0; 500 } 501 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0); 502 reg &= 0xfffffc00; 503 if (lcd_revision == LCD_VERSION_1) { 504 reg |= ((width >> 4) - 1) << 4; 505 } else { 506 width = (width >> 4) - 1; 507 reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3); 508 } 509 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0); 510 511 /* Set the Panel Height */ 512 /* Set bits 9:0 of Lines Per Pixel */ 513 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1); 514 reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00); 515 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1); 516 517 /* Set bit 10 of Lines Per Pixel */ 518 if (lcd_revision == LCD_VERSION_2) { 519 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2); 520 reg |= ((height - 1) & 0x400) << 16; 521 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2); 522 } 523 524 /* Set the Raster Order of the Frame Buffer */ 525 reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8); 526 if (raster_order) 527 reg |= LCD_RASTER_ORDER; 528 529 if (bpp == 24) 530 reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE); 531 else if (bpp == 32) 532 reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE 533 | LCD_V2_TFT_24BPP_UNPACK); 534 535 lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); 536 537 switch (bpp) { 538 case 1: 539 case 2: 540 case 4: 541 case 16: 542 case 24: 543 case 32: 544 par->palette_sz = 16 * 2; 545 break; 546 547 case 8: 548 par->palette_sz = 256 * 2; 549 break; 550 551 default: 552 return -EINVAL; 553 } 554 555 return 0; 556 } 557 558 static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, 559 unsigned blue, unsigned transp, 560 struct fb_info *info) 561 { 562 struct da8xx_fb_par *par = info->par; 563 unsigned short *palette = (unsigned short *) par->v_palette_base; 564 u_short pal; 565 int update_hw = 0; 566 567 if (regno > 255) 568 return 1; 569 570 if (info->fix.visual == FB_VISUAL_DIRECTCOLOR) 571 return 1; 572 573 if (info->var.bits_per_pixel == 8) { 574 red >>= 4; 575 green >>= 8; 576 blue >>= 12; 577 578 pal = (red & 0x0f00); 579 pal |= (green & 0x00f0); 580 pal |= (blue & 0x000f); 581 582 if (palette[regno] != pal) { 583 update_hw = 1; 584 palette[regno] = pal; 585 } 586 } else if ((info->var.bits_per_pixel == 16) && regno < 16) { 587 red >>= (16 - info->var.red.length); 588 red <<= info->var.red.offset; 589 590 green >>= (16 - info->var.green.length); 591 green <<= info->var.green.offset; 592 593 blue >>= (16 - info->var.blue.length); 594 blue <<= info->var.blue.offset; 595 596 par->pseudo_palette[regno] = red | green | blue; 597 598 if (palette[0] != 0x4000) { 599 update_hw = 1; 600 palette[0] = 0x4000; 601 } 602 } else if (((info->var.bits_per_pixel == 32) && regno < 32) || 603 ((info->var.bits_per_pixel == 24) && regno < 24)) { 604 red >>= (24 - info->var.red.length); 605 red <<= info->var.red.offset; 606 607 green >>= (24 - info->var.green.length); 608 green <<= info->var.green.offset; 609 610 blue >>= (24 - info->var.blue.length); 611 blue <<= info->var.blue.offset; 612 613 par->pseudo_palette[regno] = red | green | blue; 614 615 if (palette[0] != 0x4000) { 616 update_hw = 1; 617 palette[0] = 0x4000; 618 } 619 } 620 621 /* Update the palette in the h/w as needed. */ 622 if (update_hw) 623 lcd_blit(LOAD_PALETTE, par); 624 625 return 0; 626 } 627 628 static void lcd_reset(struct da8xx_fb_par *par) 629 { 630 /* Disable the Raster if previously Enabled */ 631 lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); 632 633 /* DMA has to be disabled */ 634 lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl); 635 lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl); 636 637 if (lcd_revision == LCD_VERSION_2) { 638 lcdc_write(0, &da8xx_fb_reg_base->int_ena_set); 639 /* Write 1 to reset */ 640 lcdc_write(LCD_CLK_MAIN_RESET, &da8xx_fb_reg_base->clk_reset); 641 lcdc_write(0, &da8xx_fb_reg_base->clk_reset); 642 } 643 } 644 645 static void lcd_calc_clk_divider(struct da8xx_fb_par *par) 646 { 647 unsigned int lcd_clk, div; 648 649 /* Get clock from sysclk2 */ 650 lcd_clk = clk_get(2); 651 652 div = lcd_clk / par->pxl_clk; 653 debug("LCD Clock: %d Divider: %d PixClk: %d\n", 654 lcd_clk, div, par->pxl_clk); 655 656 /* Configure the LCD clock divisor. */ 657 lcdc_write(LCD_CLK_DIVISOR(div) | 658 (LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl); 659 660 if (lcd_revision == LCD_VERSION_2) 661 lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN | 662 LCD_V2_CORE_CLK_EN, 663 &da8xx_fb_reg_base->clk_ena); 664 } 665 666 static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, 667 const struct da8xx_panel *panel) 668 { 669 u32 bpp; 670 int ret = 0; 671 672 lcd_reset(par); 673 674 /* Calculate the divider */ 675 lcd_calc_clk_divider(par); 676 677 if (panel->invert_pxl_clk) 678 lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) | 679 LCD_INVERT_PIXEL_CLOCK), 680 &da8xx_fb_reg_base->raster_timing_2); 681 else 682 lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 683 ~LCD_INVERT_PIXEL_CLOCK), 684 &da8xx_fb_reg_base->raster_timing_2); 685 686 /* Configure the DMA burst size. */ 687 ret = lcd_cfg_dma(cfg->dma_burst_sz); 688 if (ret < 0) 689 return ret; 690 691 /* Configure the AC bias properties. */ 692 lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt); 693 694 /* Configure the vertical and horizontal sync properties. */ 695 lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp); 696 lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp); 697 698 /* Configure for display */ 699 ret = lcd_cfg_display(cfg); 700 if (ret < 0) 701 return ret; 702 703 if ((QVGA != cfg->p_disp_panel->panel_type) && 704 (WVGA != cfg->p_disp_panel->panel_type)) 705 return -EINVAL; 706 707 if (cfg->bpp <= cfg->p_disp_panel->max_bpp && 708 cfg->bpp >= cfg->p_disp_panel->min_bpp) 709 bpp = cfg->bpp; 710 else 711 bpp = cfg->p_disp_panel->max_bpp; 712 if (bpp == 12) 713 bpp = 16; 714 ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->width, 715 (unsigned int)panel->height, bpp, 716 cfg->raster_order); 717 if (ret < 0) 718 return ret; 719 720 /* Configure FDD */ 721 lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & 0xfff00fff) | 722 (cfg->fdd << 12), &da8xx_fb_reg_base->raster_ctrl); 723 724 return 0; 725 } 726 727 static void lcdc_dma_start(void) 728 { 729 struct da8xx_fb_par *par = da8xx_fb_info->par; 730 lcdc_write(par->dma_start, 731 &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); 732 lcdc_write(par->dma_end, 733 &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); 734 lcdc_write(0, 735 &da8xx_fb_reg_base->dma_frm_buf_base_addr_1); 736 lcdc_write(0, 737 &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); 738 } 739 740 static u32 lcdc_irq_handler_rev01(void) 741 { 742 struct da8xx_fb_par *par = da8xx_fb_info->par; 743 u32 stat = lcdc_read(&da8xx_fb_reg_base->stat); 744 u32 reg_ras; 745 746 if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { 747 debug("LCD_SYNC_LOST\n"); 748 lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); 749 lcdc_write(stat, &da8xx_fb_reg_base->stat); 750 lcd_enable_raster(); 751 return LCD_SYNC_LOST; 752 } else if (stat & LCD_PL_LOAD_DONE) { 753 debug("LCD_PL_LOAD_DONE\n"); 754 /* 755 * Must disable raster before changing state of any control bit. 756 * And also must be disabled before clearing the PL loading 757 * interrupt via the following write to the status register. If 758 * this is done after then one gets multiple PL done interrupts. 759 */ 760 lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); 761 762 lcdc_write(stat, &da8xx_fb_reg_base->stat); 763 764 /* Disable PL completion interrupt */ 765 reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); 766 reg_ras &= ~LCD_V1_PL_INT_ENA; 767 lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl); 768 769 /* Setup and start data loading mode */ 770 lcd_blit(LOAD_DATA, par); 771 return LCD_PL_LOAD_DONE; 772 } else { 773 lcdc_write(stat, &da8xx_fb_reg_base->stat); 774 775 if (stat & LCD_END_OF_FRAME0) 776 debug("LCD_END_OF_FRAME0\n"); 777 778 lcdc_write(par->dma_start, 779 &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); 780 lcdc_write(par->dma_end, 781 &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); 782 par->vsync_flag = 1; 783 return LCD_END_OF_FRAME0; 784 } 785 return stat; 786 } 787 788 static u32 lcdc_irq_handler_rev02(void) 789 { 790 struct da8xx_fb_par *par = da8xx_fb_info->par; 791 u32 stat = lcdc_read(&da8xx_fb_reg_base->masked_stat); 792 u32 reg_int; 793 794 if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { 795 debug("LCD_SYNC_LOST\n"); 796 lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); 797 lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); 798 lcd_enable_raster(); 799 lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); 800 return LCD_SYNC_LOST; 801 } else if (stat & LCD_PL_LOAD_DONE) { 802 debug("LCD_PL_LOAD_DONE\n"); 803 /* 804 * Must disable raster before changing state of any control bit. 805 * And also must be disabled before clearing the PL loading 806 * interrupt via the following write to the status register. If 807 * this is done after then one gets multiple PL done interrupts. 808 */ 809 lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); 810 811 lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); 812 813 /* Disable PL completion interrupt */ 814 reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_clr) | 815 (LCD_V2_PL_INT_ENA); 816 lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_clr); 817 818 /* Setup and start data loading mode */ 819 lcd_blit(LOAD_DATA, par); 820 lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); 821 return LCD_PL_LOAD_DONE; 822 } else { 823 lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); 824 825 if (stat & LCD_END_OF_FRAME0) 826 debug("LCD_END_OF_FRAME0\n"); 827 828 lcdc_write(par->dma_start, 829 &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); 830 lcdc_write(par->dma_end, 831 &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); 832 par->vsync_flag = 1; 833 lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); 834 return LCD_END_OF_FRAME0; 835 } 836 lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); 837 return stat; 838 } 839 840 static u32 lcdc_irq_handler(void) 841 { 842 if (lcd_revision == LCD_VERSION_1) 843 return lcdc_irq_handler_rev01(); 844 else 845 return lcdc_irq_handler_rev02(); 846 } 847 848 static u32 wait_for_event(u32 event) 849 { 850 u32 timeout = 50000; 851 u32 ret; 852 853 do { 854 ret = lcdc_irq_handler(); 855 udelay(1000); 856 --timeout; 857 } while (!(ret & event) && timeout); 858 859 if (!(ret & event)) { 860 printf("%s: event %d not hit\n", __func__, event); 861 return -1; 862 } 863 864 return 0; 865 866 } 867 868 void *video_hw_init(void) 869 { 870 struct da8xx_fb_par *par; 871 u32 size; 872 u32 rev; 873 char *p; 874 875 if (!lcd_panel) { 876 printf("Display not initialized\n"); 877 return NULL; 878 } 879 gpanel.winSizeX = lcd_panel->width; 880 gpanel.winSizeY = lcd_panel->height; 881 gpanel.plnSizeX = lcd_panel->width; 882 gpanel.plnSizeY = lcd_panel->height; 883 884 switch (bits_x_pixel) { 885 case 32: 886 gpanel.gdfBytesPP = 4; 887 gpanel.gdfIndex = GDF_32BIT_X888RGB; 888 break; 889 case 24: 890 gpanel.gdfBytesPP = 4; 891 gpanel.gdfIndex = GDF_32BIT_X888RGB; 892 break; 893 case 16: 894 gpanel.gdfBytesPP = 2; 895 gpanel.gdfIndex = GDF_16BIT_565RGB; 896 break; 897 default: 898 gpanel.gdfBytesPP = 1; 899 gpanel.gdfIndex = GDF__8BIT_INDEX; 900 break; 901 } 902 903 da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DA8XX_LCD_CNTL_BASE; 904 905 /* Determine LCD IP Version */ 906 rev = lcdc_read(&da8xx_fb_reg_base->revid); 907 switch (rev) { 908 case 0x4C100102: 909 lcd_revision = LCD_VERSION_1; 910 break; 911 case 0x4F200800: 912 case 0x4F201000: 913 lcd_revision = LCD_VERSION_2; 914 break; 915 default: 916 printf("Unknown PID Reg value 0x%x, defaulting to LCD revision 1\n", 917 rev); 918 lcd_revision = LCD_VERSION_1; 919 break; 920 } 921 922 debug("rev: 0x%x Resolution: %dx%d %d\n", rev, 923 gpanel.winSizeX, 924 gpanel.winSizeY, 925 da8xx_lcd_cfg->bpp); 926 927 size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par); 928 da8xx_fb_info = malloc_cache_aligned(size); 929 debug("da8xx_fb_info at %x\n", (unsigned int)da8xx_fb_info); 930 931 if (!da8xx_fb_info) { 932 printf("Memory allocation failed for fb_info\n"); 933 return NULL; 934 } 935 memset(da8xx_fb_info, 0, size); 936 p = (char *)da8xx_fb_info; 937 da8xx_fb_info->par = p + sizeof(struct fb_info); 938 debug("da8xx_par at %x\n", (unsigned int)da8xx_fb_info->par); 939 940 par = da8xx_fb_info->par; 941 par->pxl_clk = lcd_panel->pxl_clk; 942 943 if (lcd_init(par, da8xx_lcd_cfg, lcd_panel) < 0) { 944 printf("lcd_init failed\n"); 945 goto err_release_fb; 946 } 947 948 /* allocate frame buffer */ 949 par->vram_size = lcd_panel->width * lcd_panel->height * 950 da8xx_lcd_cfg->bpp; 951 par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8; 952 953 par->vram_virt = malloc_cache_aligned(par->vram_size); 954 955 par->vram_phys = (dma_addr_t) par->vram_virt; 956 debug("Requesting 0x%x bytes for framebuffer at 0x%x\n", 957 (unsigned int)par->vram_size, 958 (unsigned int)par->vram_virt); 959 if (!par->vram_virt) { 960 printf("GLCD: malloc for frame buffer failed\n"); 961 goto err_release_fb; 962 } 963 gd->fb_base = (int)par->vram_virt; 964 965 gpanel.frameAdrs = (unsigned int)par->vram_virt; 966 da8xx_fb_info->screen_base = (char *) par->vram_virt; 967 da8xx_fb_fix.smem_start = gpanel.frameAdrs; 968 da8xx_fb_fix.smem_len = par->vram_size; 969 da8xx_fb_fix.line_length = (lcd_panel->width * da8xx_lcd_cfg->bpp) / 8; 970 971 par->dma_start = par->vram_phys; 972 par->dma_end = par->dma_start + lcd_panel->height * 973 da8xx_fb_fix.line_length - 1; 974 975 /* allocate palette buffer */ 976 par->v_palette_base = malloc_cache_aligned(PALETTE_SIZE); 977 if (!par->v_palette_base) { 978 printf("GLCD: malloc for palette buffer failed\n"); 979 goto err_release_fb_mem; 980 } 981 memset(par->v_palette_base, 0, PALETTE_SIZE); 982 par->p_palette_base = (unsigned int)par->v_palette_base; 983 984 /* Initialize par */ 985 da8xx_fb_info->var.bits_per_pixel = da8xx_lcd_cfg->bpp; 986 987 da8xx_fb_var.xres = lcd_panel->width; 988 da8xx_fb_var.xres_virtual = lcd_panel->width; 989 990 da8xx_fb_var.yres = lcd_panel->height; 991 da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS; 992 993 da8xx_fb_var.grayscale = 994 da8xx_lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; 995 da8xx_fb_var.bits_per_pixel = da8xx_lcd_cfg->bpp; 996 997 da8xx_fb_var.hsync_len = lcd_panel->hsw; 998 da8xx_fb_var.vsync_len = lcd_panel->vsw; 999 1000 /* Initialize fbinfo */ 1001 da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT; 1002 da8xx_fb_info->fix = da8xx_fb_fix; 1003 da8xx_fb_info->var = da8xx_fb_var; 1004 da8xx_fb_info->pseudo_palette = par->pseudo_palette; 1005 da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ? 1006 FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; 1007 1008 /* Clear interrupt */ 1009 memset((void *)par->vram_virt, 0, par->vram_size); 1010 lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); 1011 if (lcd_revision == LCD_VERSION_1) 1012 lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat); 1013 else 1014 lcdc_write(0xFFFF, &da8xx_fb_reg_base->masked_stat); 1015 debug("Palette at 0x%x size %d\n", par->p_palette_base, 1016 par->palette_sz); 1017 lcdc_dma_start(); 1018 1019 /* Load a default palette */ 1020 fb_setcolreg(0, 0, 0, 0, 0xffff, da8xx_fb_info); 1021 1022 /* Check that the palette is loaded */ 1023 wait_for_event(LCD_PL_LOAD_DONE); 1024 1025 /* Wait until DMA is working */ 1026 wait_for_event(LCD_END_OF_FRAME0); 1027 1028 return (void *)&gpanel; 1029 1030 err_release_fb_mem: 1031 free(par->vram_virt); 1032 1033 err_release_fb: 1034 free(da8xx_fb_info); 1035 1036 return NULL; 1037 } 1038 1039 void da8xx_video_init(const struct da8xx_panel *panel, 1040 const struct lcd_ctrl_config *lcd_cfg, int bits_pixel) 1041 { 1042 lcd_panel = panel; 1043 da8xx_lcd_cfg = lcd_cfg; 1044 bits_x_pixel = bits_pixel; 1045 } 1046