1config VIDEO_BRIDGE 2 bool "Support video bridges" 3 depends on DM 4 help 5 Some platforms use video bridges to convert from one output to 6 another. For example, where the SoC only supports eDP and the LCD 7 requires LVDS, an eDP->LVDS bridge chip can be used to provide the 8 necessary conversion. This option enables support for these devices. 9 10config VIDEO_BRIDGE_PARADE_PS862X 11 bool "Support Parade PS862X DP->LVDS bridge" 12 depends on VIDEO_BRIDGE 13 help 14 The Parade PS8622 and PS8625 are DisplayPort-to-LVDS (Low voltage 15 differential signalling) converters. They enable an LVDS LCD panel 16 to be connected to an eDP output device such as an SoC that lacks 17 LVDS capability, or where LVDS requires too many signals to route 18 on the PCB. Setup parameters are provided in the device tree. 19 20config VIDEO_BRIDGE_NXP_PTN3460 21 bool "Support NXP PTN3460 DP->LVDS bridge" 22 depends on VIDEO_BRIDGE 23 help 24 The NXP PTN3460 is a DisplayPort-to-LVDS (Low voltage differential 25 signalling) converter. It enables an LVDS LCD panel to be connected 26 to an eDP output device such as an SoC that lacks LVDS capability, 27 or where LVDS requires too many signals to route on the PCB. 28 29config VIDEO_BRIDGE_ANALOGIX_ANX6345 30 bool "Support Analogix ANX6345 RGB->DP bridge" 31 depends on VIDEO_BRIDGE 32 select DM_I2C 33 help 34 The Analogix ANX6345 is RGB-to-DP converter. It enables an eDP LCD 35 panel to be connected to an parallel LCD interface. 36