1 /* 2 * Driver for AT91/AT32 LCD Controller 3 * 4 * Copyright (C) 2007 Atmel Corporation 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <asm/io.h> 27 #include <asm/arch/hardware.h> 28 #include <asm/arch/gpio.h> 29 #include <asm/arch/clk.h> 30 #include <lcd.h> 31 #include <atmel_lcdc.h> 32 33 int lcd_line_length; 34 int lcd_color_fg; 35 int lcd_color_bg; 36 37 void *lcd_base; /* Start of framebuffer memory */ 38 void *lcd_console_address; /* Start of console buffer */ 39 40 short console_col; 41 short console_row; 42 43 /* configurable parameters */ 44 #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 45 #define ATMEL_LCDC_DMA_BURST_LEN 8 46 47 #if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9) 48 #define ATMEL_LCDC_FIFO_SIZE 2048 49 #else 50 #define ATMEL_LCDC_FIFO_SIZE 512 51 #endif 52 53 #define lcdc_readl(mmio, reg) __raw_readl((mmio)+(reg)) 54 #define lcdc_writel(mmio, reg, val) __raw_writel((val), (mmio)+(reg)) 55 56 void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) 57 { 58 #if defined(CONFIG_ATMEL_LCD_BGR555) 59 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno), 60 (red >> 3) | ((green & 0xf8) << 2) | ((blue & 0xf8) << 7)); 61 #else 62 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno), 63 (blue >> 3) | ((green & 0xfc) << 3) | ((red & 0xf8) << 8)); 64 #endif 65 } 66 67 void lcd_ctrl_init(void *lcdbase) 68 { 69 unsigned long value; 70 71 /* Turn off the LCD controller and the DMA controller */ 72 lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON, 73 1 << ATMEL_LCDC_GUARDT_OFFSET); 74 75 /* Wait for the LCDC core to become idle */ 76 while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) 77 udelay(10); 78 79 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0); 80 81 /* Reset LCDC DMA */ 82 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST); 83 84 /* ...set frame size and burst length = 8 words (?) */ 85 value = (panel_info.vl_col * panel_info.vl_row * 86 NBITS(panel_info.vl_bpix)) / 32; 87 value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET); 88 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value); 89 90 /* Set pixel clock */ 91 value = get_lcdc_clk_rate(0) / panel_info.vl_clk; 92 if (get_lcdc_clk_rate(0) % panel_info.vl_clk) 93 value++; 94 value = (value / 2) - 1; 95 96 if (!value) { 97 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); 98 } else 99 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, 100 value << ATMEL_LCDC_CLKVAL_OFFSET); 101 102 /* Initialize control register 2 */ 103 value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE; 104 if (panel_info.vl_tft) 105 value |= ATMEL_LCDC_DISTYPE_TFT; 106 107 if (!(panel_info.vl_sync & ATMEL_LCDC_INVLINE_INVERTED)) 108 value |= ATMEL_LCDC_INVLINE_INVERTED; 109 if (!(panel_info.vl_sync & ATMEL_LCDC_INVFRAME_INVERTED)) 110 value |= ATMEL_LCDC_INVFRAME_INVERTED; 111 value |= (panel_info.vl_bpix << 5); 112 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value); 113 114 /* Vertical timing */ 115 value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET; 116 value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET; 117 value |= panel_info.vl_lower_margin; 118 lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value); 119 120 /* Horizontal timing */ 121 value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET; 122 value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET; 123 value |= (panel_info.vl_left_margin - 1); 124 lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value); 125 126 /* Display size */ 127 value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET; 128 value |= panel_info.vl_row - 1; 129 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value); 130 131 /* FIFO Threshold: Use formula from data sheet */ 132 value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3); 133 lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value); 134 135 /* Toggle LCD_MODE every frame */ 136 lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0); 137 138 /* Disable all interrupts */ 139 lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL); 140 141 /* Set contrast */ 142 value = ATMEL_LCDC_PS_DIV8 | 143 ATMEL_LCDC_POL_POSITIVE | 144 ATMEL_LCDC_ENA_PWMENABLE; 145 lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value); 146 lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); 147 148 /* Set framebuffer DMA base address and pixel offset */ 149 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase); 150 151 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN); 152 lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON, 153 (1 << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR); 154 } 155 156 ulong calc_fbsize(void) 157 { 158 return ((panel_info.vl_col * panel_info.vl_row * 159 NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE; 160 } 161