1 /* 2 * Driver for AT91/AT32 LCD Controller 3 * 4 * Copyright (C) 2007 Atmel Corporation 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <asm/io.h> 11 #include <asm/arch/gpio.h> 12 #include <asm/arch/clk.h> 13 #include <lcd.h> 14 #include <bmp_layout.h> 15 #include <atmel_lcdc.h> 16 17 /* configurable parameters */ 18 #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 19 #define ATMEL_LCDC_DMA_BURST_LEN 8 20 #ifndef ATMEL_LCDC_GUARD_TIME 21 #define ATMEL_LCDC_GUARD_TIME 1 22 #endif 23 24 #if defined(CONFIG_AT91SAM9263) 25 #define ATMEL_LCDC_FIFO_SIZE 2048 26 #else 27 #define ATMEL_LCDC_FIFO_SIZE 512 28 #endif 29 30 #define lcdc_readl(mmio, reg) __raw_readl((mmio)+(reg)) 31 #define lcdc_writel(mmio, reg, val) __raw_writel((val), (mmio)+(reg)) 32 33 ushort *configuration_get_cmap(void) 34 { 35 return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0)); 36 } 37 38 #if defined(CONFIG_BMP_16BPP) && defined(CONFIG_ATMEL_LCD_BGR555) 39 void fb_put_word(uchar **fb, uchar **from) 40 { 41 *(*fb)++ = (((*from)[0] & 0x1f) << 2) | ((*from)[1] & 0x03); 42 *(*fb)++ = ((*from)[0] & 0xe0) | (((*from)[1] & 0x7c) >> 2); 43 *from += 2; 44 } 45 #endif 46 47 #ifdef CONFIG_LCD_LOGO 48 #include <bmp_logo.h> 49 void lcd_logo_set_cmap(void) 50 { 51 int i; 52 uint lut_entry; 53 ushort colreg; 54 uint *cmap = (uint *)configuration_get_cmap(); 55 56 for (i = 0; i < BMP_LOGO_COLORS; ++i) { 57 colreg = bmp_logo_palette[i]; 58 #ifdef CONFIG_ATMEL_LCD_BGR555 59 lut_entry = ((colreg & 0x000F) << 11) | 60 ((colreg & 0x00F0) << 2) | 61 ((colreg & 0x0F00) >> 7); 62 #else 63 lut_entry = ((colreg & 0x000F) << 1) | 64 ((colreg & 0x00F0) << 3) | 65 ((colreg & 0x0F00) << 4); 66 #endif 67 *(cmap + BMP_LOGO_OFFSET) = lut_entry; 68 cmap++; 69 } 70 } 71 #endif 72 73 void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) 74 { 75 #if defined(CONFIG_ATMEL_LCD_BGR555) 76 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno), 77 (red >> 3) | ((green & 0xf8) << 2) | ((blue & 0xf8) << 7)); 78 #else 79 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno), 80 (blue >> 3) | ((green & 0xfc) << 3) | ((red & 0xf8) << 8)); 81 #endif 82 } 83 84 void lcd_set_cmap(bmp_image_t *bmp, unsigned colors) 85 { 86 int i; 87 88 for (i = 0; i < colors; ++i) { 89 bmp_color_table_entry_t cte = bmp->color_table[i]; 90 lcd_setcolreg(i, cte.red, cte.green, cte.blue); 91 } 92 } 93 94 void lcd_ctrl_init(void *lcdbase) 95 { 96 unsigned long value; 97 98 /* Turn off the LCD controller and the DMA controller */ 99 lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON, 100 ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET); 101 102 /* Wait for the LCDC core to become idle */ 103 while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) 104 udelay(10); 105 106 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0); 107 108 /* Reset LCDC DMA */ 109 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST); 110 111 /* ...set frame size and burst length = 8 words (?) */ 112 value = (panel_info.vl_col * panel_info.vl_row * 113 NBITS(panel_info.vl_bpix)) / 32; 114 value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET); 115 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value); 116 117 /* Set pixel clock */ 118 value = get_lcdc_clk_rate(0) / panel_info.vl_clk; 119 if (get_lcdc_clk_rate(0) % panel_info.vl_clk) 120 value++; 121 value = (value / 2) - 1; 122 123 if (!value) { 124 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); 125 } else 126 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, 127 value << ATMEL_LCDC_CLKVAL_OFFSET); 128 129 /* Initialize control register 2 */ 130 #ifdef CONFIG_AVR32 131 value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE; 132 #else 133 value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE; 134 #endif 135 if (panel_info.vl_tft) 136 value |= ATMEL_LCDC_DISTYPE_TFT; 137 138 value |= panel_info.vl_sync; 139 value |= (panel_info.vl_bpix << 5); 140 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value); 141 142 /* Vertical timing */ 143 value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET; 144 value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET; 145 value |= panel_info.vl_lower_margin; 146 lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value); 147 148 /* Horizontal timing */ 149 value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET; 150 value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET; 151 value |= (panel_info.vl_left_margin - 1); 152 lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value); 153 154 /* Display size */ 155 value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET; 156 value |= panel_info.vl_row - 1; 157 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value); 158 159 /* FIFO Threshold: Use formula from data sheet */ 160 value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3); 161 lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value); 162 163 /* Toggle LCD_MODE every frame */ 164 lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0); 165 166 /* Disable all interrupts */ 167 lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL); 168 169 /* Set contrast */ 170 value = ATMEL_LCDC_PS_DIV8 | 171 ATMEL_LCDC_ENA_PWMENABLE; 172 if (!panel_info.vl_cont_pol_low) 173 value |= ATMEL_LCDC_POL_POSITIVE; 174 lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value); 175 lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); 176 177 /* Set framebuffer DMA base address and pixel offset */ 178 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase); 179 180 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN); 181 lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON, 182 (ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR); 183 } 184 185 ulong calc_fbsize(void) 186 { 187 return ((panel_info.vl_col * panel_info.vl_row * 188 NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE; 189 } 190