1 /* 2 * Driver for AT91/AT32 LCD Controller 3 * 4 * Copyright (C) 2007 Atmel Corporation 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <asm/io.h> 27 #include <asm/arch/gpio.h> 28 #include <asm/arch/clk.h> 29 #include <lcd.h> 30 #include <atmel_lcdc.h> 31 32 int lcd_line_length; 33 int lcd_color_fg; 34 int lcd_color_bg; 35 36 void *lcd_base; /* Start of framebuffer memory */ 37 void *lcd_console_address; /* Start of console buffer */ 38 39 short console_col; 40 short console_row; 41 42 /* configurable parameters */ 43 #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 44 #define ATMEL_LCDC_DMA_BURST_LEN 8 45 #ifndef ATMEL_LCDC_GUARD_TIME 46 #define ATMEL_LCDC_GUARD_TIME 1 47 #endif 48 49 #if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9) 50 #define ATMEL_LCDC_FIFO_SIZE 2048 51 #else 52 #define ATMEL_LCDC_FIFO_SIZE 512 53 #endif 54 55 #define lcdc_readl(mmio, reg) __raw_readl((mmio)+(reg)) 56 #define lcdc_writel(mmio, reg, val) __raw_writel((val), (mmio)+(reg)) 57 58 void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) 59 { 60 #if defined(CONFIG_ATMEL_LCD_BGR555) 61 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno), 62 (red >> 3) | ((green & 0xf8) << 2) | ((blue & 0xf8) << 7)); 63 #else 64 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno), 65 (blue >> 3) | ((green & 0xfc) << 3) | ((red & 0xf8) << 8)); 66 #endif 67 } 68 69 void lcd_ctrl_init(void *lcdbase) 70 { 71 unsigned long value; 72 73 /* Turn off the LCD controller and the DMA controller */ 74 lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON, 75 ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET); 76 77 /* Wait for the LCDC core to become idle */ 78 while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) 79 udelay(10); 80 81 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0); 82 83 /* Reset LCDC DMA */ 84 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST); 85 86 /* ...set frame size and burst length = 8 words (?) */ 87 value = (panel_info.vl_col * panel_info.vl_row * 88 NBITS(panel_info.vl_bpix)) / 32; 89 value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET); 90 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value); 91 92 /* Set pixel clock */ 93 value = get_lcdc_clk_rate(0) / panel_info.vl_clk; 94 if (get_lcdc_clk_rate(0) % panel_info.vl_clk) 95 value++; 96 value = (value / 2) - 1; 97 98 if (!value) { 99 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); 100 } else 101 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, 102 value << ATMEL_LCDC_CLKVAL_OFFSET); 103 104 /* Initialize control register 2 */ 105 #ifdef CONFIG_AVR32 106 value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE; 107 #else 108 value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE; 109 #endif 110 if (panel_info.vl_tft) 111 value |= ATMEL_LCDC_DISTYPE_TFT; 112 113 value |= panel_info.vl_sync; 114 value |= (panel_info.vl_bpix << 5); 115 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value); 116 117 /* Vertical timing */ 118 value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET; 119 value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET; 120 value |= panel_info.vl_lower_margin; 121 lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value); 122 123 /* Horizontal timing */ 124 value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET; 125 value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET; 126 value |= (panel_info.vl_left_margin - 1); 127 lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value); 128 129 /* Display size */ 130 value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET; 131 value |= panel_info.vl_row - 1; 132 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value); 133 134 /* FIFO Threshold: Use formula from data sheet */ 135 value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3); 136 lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value); 137 138 /* Toggle LCD_MODE every frame */ 139 lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0); 140 141 /* Disable all interrupts */ 142 lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL); 143 144 /* Set contrast */ 145 value = ATMEL_LCDC_PS_DIV8 | 146 ATMEL_LCDC_POL_POSITIVE | 147 ATMEL_LCDC_ENA_PWMENABLE; 148 lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value); 149 lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); 150 151 /* Set framebuffer DMA base address and pixel offset */ 152 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase); 153 154 lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN); 155 lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON, 156 (ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR); 157 } 158 159 ulong calc_fbsize(void) 160 { 161 return ((panel_info.vl_col * panel_info.vl_row * 162 NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE; 163 } 164