xref: /openbmc/u-boot/drivers/video/Kconfig (revision 7e8702a0) 
1#
2# Video configuration
3#
4
5menu "Graphics support"
6
7config DM_VIDEO
8	bool "Enable driver model support for LCD/video"
9	depends on DM
10	help
11	  This enables driver model for LCD and video devices. These support
12	  a bitmap display of various sizes and depths which can be drawn on
13	  to display a command-line console or splash screen. Enabling this
14	  option compiles in the video uclass and routes all LCD/video access
15	  through this.
16
17config VIDEO_BPP8
18	bool "Support 8-bit-per-pixel displays"
19	depends on DM_VIDEO
20	default y if DM_VIDEO
21	help
22	  Support drawing text and bitmaps onto a 8-bit-per-pixel display.
23	  Enabling this will include code to support this display. Without
24	  this option, such displays will not be supported and console output
25	  will be empty.
26
27config VIDEO_BPP16
28	bool "Support 16-bit-per-pixel displays"
29	depends on DM_VIDEO
30	default y if DM_VIDEO
31	help
32	  Support drawing text and bitmaps onto a 16-bit-per-pixel display.
33	  Enabling this will include code to support this display. Without
34	  this option, such displays will not be supported and console output
35	  will be empty.
36
37config VIDEO_BPP32
38	bool "Support 32-bit-per-pixel displays"
39	depends on DM_VIDEO
40	default y if DM_VIDEO
41	help
42	  Support drawing text and bitmaps onto a 32-bit-per-pixel display.
43	  Enabling this will include code to support this display. Without
44	  this option, such displays will not be supported and console output
45	  will be empty.
46
47config VIDEO_ROTATION
48	bool "Support rotated displays"
49	depends on DM_VIDEO
50	help
51	  Sometimes, for example if the display is mounted in portrait
52	  mode or even if it's mounted landscape but rotated by 180degree,
53	  we need to rotate our content of the display relative to the
54	  framebuffer, so that user can read the messages which are
55	  printed out. Enable this option to include a text driver which can
56	  support this. The rotation is set by the 'rot' parameter in
57	  struct video_priv: 0=unrotated, 1=90 degrees clockwise, 2=180
58	  degrees, 3=270 degrees.
59
60config VIDEO_VESA
61	bool "Enable VESA video driver support"
62	default n
63	help
64	  Turn on this option to enable a very simple driver which uses vesa
65	  to discover the video mode and then provides a frame buffer for use
66	  by U-Boot. This can in principle be used with any platform that
67	  supports PCI and video cards that support VESA BIOS Extension (VBE).
68
69config FRAMEBUFFER_SET_VESA_MODE
70	bool "Set framebuffer graphics resolution"
71	depends on VIDEO_VESA
72	help
73	  Set VESA/native framebuffer mode (needed for bootsplash and graphical
74	  framebuffer console)
75
76choice
77	prompt "framebuffer graphics resolution"
78	default FRAMEBUFFER_VESA_MODE_117
79	depends on FRAMEBUFFER_SET_VESA_MODE
80	help
81	  This option sets the resolution used for the U-Boot framebuffer (and
82	  bootsplash screen).
83
84config FRAMEBUFFER_VESA_MODE_100
85	bool "640x400 256-color"
86
87config FRAMEBUFFER_VESA_MODE_101
88	bool "640x480 256-color"
89
90config FRAMEBUFFER_VESA_MODE_102
91	bool "800x600 16-color"
92
93config FRAMEBUFFER_VESA_MODE_103
94	bool "800x600 256-color"
95
96config FRAMEBUFFER_VESA_MODE_104
97	bool "1024x768 16-color"
98
99config FRAMEBUFFER_VESA_MODE_105
100	bool "1024x768 256-color"
101
102config FRAMEBUFFER_VESA_MODE_106
103	bool "1280x1024 16-color"
104
105config FRAMEBUFFER_VESA_MODE_107
106	bool "1280x1024 256-color"
107
108config FRAMEBUFFER_VESA_MODE_108
109	bool "80x60 text"
110
111config FRAMEBUFFER_VESA_MODE_109
112	bool "132x25 text"
113
114config FRAMEBUFFER_VESA_MODE_10A
115	bool "132x43 text"
116
117config FRAMEBUFFER_VESA_MODE_10B
118	bool "132x50 text"
119
120config FRAMEBUFFER_VESA_MODE_10C
121	bool "132x60 text"
122
123config FRAMEBUFFER_VESA_MODE_10D
124	bool "320x200 32k-color (1:5:5:5)"
125
126config FRAMEBUFFER_VESA_MODE_10E
127	bool "320x200 64k-color (5:6:5)"
128
129config FRAMEBUFFER_VESA_MODE_10F
130	bool "320x200 16.8M-color (8:8:8)"
131
132config FRAMEBUFFER_VESA_MODE_110
133	bool "640x480 32k-color (1:5:5:5)"
134
135config FRAMEBUFFER_VESA_MODE_111
136	bool "640x480 64k-color (5:6:5)"
137
138config FRAMEBUFFER_VESA_MODE_112
139	bool "640x480 16.8M-color (8:8:8)"
140
141config FRAMEBUFFER_VESA_MODE_113
142	bool "800x600 32k-color (1:5:5:5)"
143
144config FRAMEBUFFER_VESA_MODE_114
145	bool "800x600 64k-color (5:6:5)"
146
147config FRAMEBUFFER_VESA_MODE_115
148	bool "800x600 16.8M-color (8:8:8)"
149
150config FRAMEBUFFER_VESA_MODE_116
151	bool "1024x768 32k-color (1:5:5:5)"
152
153config FRAMEBUFFER_VESA_MODE_117
154	bool "1024x768 64k-color (5:6:5)"
155
156config FRAMEBUFFER_VESA_MODE_118
157	bool "1024x768 16.8M-color (8:8:8)"
158
159config FRAMEBUFFER_VESA_MODE_119
160	bool "1280x1024 32k-color (1:5:5:5)"
161
162config FRAMEBUFFER_VESA_MODE_11A
163	bool "1280x1024 64k-color (5:6:5)"
164
165config FRAMEBUFFER_VESA_MODE_11B
166	bool "1280x1024 16.8M-color (8:8:8)"
167
168config FRAMEBUFFER_VESA_MODE_USER
169	bool "Manually select VESA mode"
170
171endchoice
172
173# Map the config names to an integer (KB).
174config FRAMEBUFFER_VESA_MODE
175	prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER
176	hex
177	default 0x100 if FRAMEBUFFER_VESA_MODE_100
178	default 0x101 if FRAMEBUFFER_VESA_MODE_101
179	default 0x102 if FRAMEBUFFER_VESA_MODE_102
180	default 0x103 if FRAMEBUFFER_VESA_MODE_103
181	default 0x104 if FRAMEBUFFER_VESA_MODE_104
182	default 0x105 if FRAMEBUFFER_VESA_MODE_105
183	default 0x106 if FRAMEBUFFER_VESA_MODE_106
184	default 0x107 if FRAMEBUFFER_VESA_MODE_107
185	default 0x108 if FRAMEBUFFER_VESA_MODE_108
186	default 0x109 if FRAMEBUFFER_VESA_MODE_109
187	default 0x10A if FRAMEBUFFER_VESA_MODE_10A
188	default 0x10B if FRAMEBUFFER_VESA_MODE_10B
189	default 0x10C if FRAMEBUFFER_VESA_MODE_10C
190	default 0x10D if FRAMEBUFFER_VESA_MODE_10D
191	default 0x10E if FRAMEBUFFER_VESA_MODE_10E
192	default 0x10F if FRAMEBUFFER_VESA_MODE_10F
193	default 0x110 if FRAMEBUFFER_VESA_MODE_110
194	default 0x111 if FRAMEBUFFER_VESA_MODE_111
195	default 0x112 if FRAMEBUFFER_VESA_MODE_112
196	default 0x113 if FRAMEBUFFER_VESA_MODE_113
197	default 0x114 if FRAMEBUFFER_VESA_MODE_114
198	default 0x115 if FRAMEBUFFER_VESA_MODE_115
199	default 0x116 if FRAMEBUFFER_VESA_MODE_116
200	default 0x117 if FRAMEBUFFER_VESA_MODE_117
201	default 0x118 if FRAMEBUFFER_VESA_MODE_118
202	default 0x119 if FRAMEBUFFER_VESA_MODE_119
203	default 0x11A if FRAMEBUFFER_VESA_MODE_11A
204	default 0x11B if FRAMEBUFFER_VESA_MODE_11B
205	default 0x117 if FRAMEBUFFER_VESA_MODE_USER
206
207config VIDEO_LCD_ANX9804
208	bool "ANX9804 bridge chip"
209	default n
210	---help---
211	Support for the ANX9804 bridge chip, which can take pixel data coming
212	from a parallel LCD interface and translate it on the fy into a DP
213	interface for driving eDP TFT displays. It uses I2C for configuration.
214
215config VIDEO_LCD_SSD2828
216	bool "SSD2828 bridge chip"
217	default n
218	---help---
219	Support for the SSD2828 bridge chip, which can take pixel data coming
220	from a parallel LCD interface and translate it on the fly into MIPI DSI
221	interface for driving a MIPI compatible LCD panel. It uses SPI for
222	configuration.
223
224config VIDEO_LCD_SSD2828_TX_CLK
225	int "SSD2828 TX_CLK frequency (in MHz)"
226	depends on VIDEO_LCD_SSD2828
227	default 0
228	---help---
229	The frequency of the crystal, which is clocking SSD2828. It may be
230	anything in the 8MHz-30MHz range and the exact value should be
231	retrieved from the board schematics. Or in the case of Allwinner
232	hardware, it can be usually found as 'lcd_xtal_freq' variable in
233	FEX files. It can be also set to 0 for selecting PCLK from the
234	parallel LCD interface instead of TX_CLK as the PLL clock source.
235
236config VIDEO_LCD_SSD2828_RESET
237	string "RESET pin of SSD2828"
238	depends on VIDEO_LCD_SSD2828
239	default ""
240	---help---
241	The reset pin of SSD2828 chip. This takes a string in the format
242	understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
243
244config VIDEO_LCD_HITACHI_TX18D42VM
245	bool "Hitachi tx18d42vm LVDS LCD panel support"
246	depends on VIDEO
247	default n
248	---help---
249	Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a
250	lcd controller which needs to be initialized over SPI, once that is
251	done they work like a regular LVDS panel.
252
253config VIDEO_LCD_SPI_CS
254	string "SPI CS pin for LCD related config job"
255	depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
256	default ""
257	---help---
258	This is one of the SPI communication pins, involved in setting up a
259	working LCD configuration. The exact role of SPI may differ for
260	different hardware setups. The option takes a string in the format
261	understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
262
263config VIDEO_LCD_SPI_SCLK
264	string "SPI SCLK pin for LCD related config job"
265	depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
266	default ""
267	---help---
268	This is one of the SPI communication pins, involved in setting up a
269	working LCD configuration. The exact role of SPI may differ for
270	different hardware setups. The option takes a string in the format
271	understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
272
273config VIDEO_LCD_SPI_MOSI
274	string "SPI MOSI pin for LCD related config job"
275	depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
276	default ""
277	---help---
278	This is one of the SPI communication pins, involved in setting up a
279	working LCD configuration. The exact role of SPI may differ for
280	different hardware setups. The option takes a string in the format
281	understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
282
283config VIDEO_LCD_SPI_MISO
284	string "SPI MISO pin for LCD related config job (optional)"
285	depends on VIDEO_LCD_SSD2828
286	default ""
287	---help---
288	This is one of the SPI communication pins, involved in setting up a
289	working LCD configuration. The exact role of SPI may differ for
290	different hardware setups. If wired up, this pin may provide additional
291	useful functionality. Such as bi-directional communication with the
292	hardware and LCD panel id retrieval (if the panel can report it). The
293	option takes a string in the format understood by 'name_to_gpio'
294	function, e.g. PH1 for pin 1 of port H.
295
296config VIDEO_MVEBU
297	bool "Armada XP LCD controller"
298	default n
299	---help---
300	Support for the LCD controller integrated in the Marvell
301	Armada XP SoC.
302
303config I2C_EDID
304	bool "Enable EDID library"
305	depends on DM_I2C
306	default n
307	help
308	   This enables library for accessing EDID data from an LCD panel.
309
310config DISPLAY
311	bool "Enable Display support"
312	depends on DM
313	default n
314	select I2C_EDID
315	help
316	   This supports drivers that provide a display, such as eDP (Embedded
317	   DisplayPort) and HDMI (High Definition Multimedia Interface).
318	   The devices provide a simple interface to start up the display,
319	   read display information and enable it.
320
321config VIDEO_ROCKCHIP
322	bool "Enable Rockchip video support"
323	depends on DM_VIDEO
324	help
325	   Rockchip SoCs provide video output capabilities for High-Definition
326	   Multimedia Interface (HDMI), Low-voltage Differential Signalling
327	   (LVDS), embedded DisplayPort (eDP) and Display Serial Interface
328	   (DSI). This driver supports the on-chip video output device, and
329	   targets the Rockchip RK3288.
330
331config VIDEO_SANDBOX_SDL
332	bool "Enable sandbox video console using SDL"
333	depends on SANDBOX
334	help
335	  When using sandbox you can enable an emulated LCD display which
336	  appears as an SDL (Simple DirectMedia Layer) window. This is a
337	  console device and can display stdout output. Within U-Boot is is
338	  a normal bitmap display and can display images as well as text.
339
340config VIDEO_TEGRA124
341	bool "Enable video support on Tegra124"
342	help
343	   Tegra124 supports many video output options including eDP and
344	   HDMI. At present only eDP is supported by U-Boot. This option
345	   enables this support which can be used on devices which
346	   have an eDP display connected.
347
348source "drivers/video/bridge/Kconfig"
349
350endmenu
351