xref: /openbmc/u-boot/drivers/video/Kconfig (revision 4bb656e9)
1#
2# Video configuration
3#
4
5menu "Graphics support"
6
7config DM_VIDEO
8	bool "Enable driver model support for LCD/video"
9	depends on DM
10	help
11	  This enables driver model for LCD and video devices. These support
12	  a bitmap display of various sizes and depths which can be drawn on
13	  to display a command-line console or splash screen. Enabling this
14	  option compiles in the video uclass and routes all LCD/video access
15	  through this.
16
17config VIDEO_BPP8
18	bool "Support 8-bit-per-pixel displays"
19	depends on DM_VIDEO
20	default y if DM_VIDEO
21	help
22	  Support drawing text and bitmaps onto a 8-bit-per-pixel display.
23	  Enabling this will include code to support this display. Without
24	  this option, such displays will not be supported and console output
25	  will be empty.
26
27config VIDEO_BPP16
28	bool "Support 16-bit-per-pixel displays"
29	depends on DM_VIDEO
30	default y if DM_VIDEO
31	help
32	  Support drawing text and bitmaps onto a 16-bit-per-pixel display.
33	  Enabling this will include code to support this display. Without
34	  this option, such displays will not be supported and console output
35	  will be empty.
36
37config VIDEO_BPP32
38	bool "Support 32-bit-per-pixel displays"
39	depends on DM_VIDEO
40	default y if DM_VIDEO
41	help
42	  Support drawing text and bitmaps onto a 32-bit-per-pixel display.
43	  Enabling this will include code to support this display. Without
44	  this option, such displays will not be supported and console output
45	  will be empty.
46
47config CONSOLE_NORMAL
48	bool "Support a simple text console"
49	depends on DM_VIDEO
50	default y if DM_VIDEO
51	help
52	  Support drawing text on the frame buffer console so that it can be
53	  used as a console. Rotation is not supported by this driver (see
54	  CONFIG_CONSOLE_ROTATION for that). A built-in 8x16 font is used
55	  for the display.
56
57config CONSOLE_ROTATION
58	bool "Support rotated displays"
59	depends on DM_VIDEO
60	help
61	  Sometimes, for example if the display is mounted in portrait
62	  mode or even if it's mounted landscape but rotated by 180degree,
63	  we need to rotate our content of the display relative to the
64	  framebuffer, so that user can read the messages which are
65	  printed out. Enable this option to include a text driver which can
66	  support this. The rotation is set by the 'rot' parameter in
67	  struct video_priv: 0=unrotated, 1=90 degrees clockwise, 2=180
68	  degrees, 3=270 degrees.
69
70config CONSOLE_TRUETYPE
71	bool "Support a console that uses TrueType fonts"
72	depends on DM_VIDEO
73	help
74	  TrueTrype fonts can provide outline-drawing capability rather than
75	  needing to provide a bitmap for each font and size that is needed.
76	  With this option you can adjust the text size and use a variety of
77	  fonts. Note that this is noticeably slower than with normal console.
78
79config CONSOLE_TRUETYPE_SIZE
80	int "TrueType font size"
81	depends on CONSOLE_TRUETYPE
82	default 18
83	help
84	  This sets the font size for the console. The size is measured in
85	  pixels and is the nominal height of a character. Note that fonts
86	  are commonly measured in 'points', being 1/72 inch (about 3.52mm).
87	  However that measurement depends on the size of your display and
88	  there is no standard display density. At present there is not a
89	  method to select the display's physical size, which would allow
90	  U-Boot to calculate the correct font size.
91
92source "drivers/video/fonts/Kconfig"
93
94config VIDCONSOLE_AS_LCD
95	bool "Use 'vidconsole' when 'lcd' is seen in stdout"
96	depends on DM_VIDEO
97	help
98	  This is a work-around for boards which have 'lcd' in their stdout
99	  environment variable, but have moved to use driver model for video.
100	  In this case the console will no-longer work. While it is possible
101	  to update the environment, the breakage may be confusing for users.
102	  This option will be removed around the end of 2016.
103
104config VIDEO_VESA
105	bool "Enable VESA video driver support"
106	default n
107	help
108	  Turn on this option to enable a very simple driver which uses vesa
109	  to discover the video mode and then provides a frame buffer for use
110	  by U-Boot. This can in principle be used with any platform that
111	  supports PCI and video cards that support VESA BIOS Extension (VBE).
112
113config FRAMEBUFFER_SET_VESA_MODE
114	bool "Set framebuffer graphics resolution"
115	depends on VIDEO_VESA || VIDEO_BROADWELL_IGD
116	help
117	  Set VESA/native framebuffer mode (needed for bootsplash and graphical
118	  framebuffer console)
119
120choice
121	prompt "framebuffer graphics resolution"
122	default FRAMEBUFFER_VESA_MODE_117
123	depends on FRAMEBUFFER_SET_VESA_MODE
124	help
125	  This option sets the resolution used for the U-Boot framebuffer (and
126	  bootsplash screen).
127
128config FRAMEBUFFER_VESA_MODE_100
129	bool "640x400 256-color"
130
131config FRAMEBUFFER_VESA_MODE_101
132	bool "640x480 256-color"
133
134config FRAMEBUFFER_VESA_MODE_102
135	bool "800x600 16-color"
136
137config FRAMEBUFFER_VESA_MODE_103
138	bool "800x600 256-color"
139
140config FRAMEBUFFER_VESA_MODE_104
141	bool "1024x768 16-color"
142
143config FRAMEBUFFER_VESA_MODE_105
144	bool "1024x768 256-color"
145
146config FRAMEBUFFER_VESA_MODE_106
147	bool "1280x1024 16-color"
148
149config FRAMEBUFFER_VESA_MODE_107
150	bool "1280x1024 256-color"
151
152config FRAMEBUFFER_VESA_MODE_108
153	bool "80x60 text"
154
155config FRAMEBUFFER_VESA_MODE_109
156	bool "132x25 text"
157
158config FRAMEBUFFER_VESA_MODE_10A
159	bool "132x43 text"
160
161config FRAMEBUFFER_VESA_MODE_10B
162	bool "132x50 text"
163
164config FRAMEBUFFER_VESA_MODE_10C
165	bool "132x60 text"
166
167config FRAMEBUFFER_VESA_MODE_10D
168	bool "320x200 32k-color (1:5:5:5)"
169
170config FRAMEBUFFER_VESA_MODE_10E
171	bool "320x200 64k-color (5:6:5)"
172
173config FRAMEBUFFER_VESA_MODE_10F
174	bool "320x200 16.8M-color (8:8:8)"
175
176config FRAMEBUFFER_VESA_MODE_110
177	bool "640x480 32k-color (1:5:5:5)"
178
179config FRAMEBUFFER_VESA_MODE_111
180	bool "640x480 64k-color (5:6:5)"
181
182config FRAMEBUFFER_VESA_MODE_112
183	bool "640x480 16.8M-color (8:8:8)"
184
185config FRAMEBUFFER_VESA_MODE_113
186	bool "800x600 32k-color (1:5:5:5)"
187
188config FRAMEBUFFER_VESA_MODE_114
189	bool "800x600 64k-color (5:6:5)"
190
191config FRAMEBUFFER_VESA_MODE_115
192	bool "800x600 16.8M-color (8:8:8)"
193
194config FRAMEBUFFER_VESA_MODE_116
195	bool "1024x768 32k-color (1:5:5:5)"
196
197config FRAMEBUFFER_VESA_MODE_117
198	bool "1024x768 64k-color (5:6:5)"
199
200config FRAMEBUFFER_VESA_MODE_118
201	bool "1024x768 16.8M-color (8:8:8)"
202
203config FRAMEBUFFER_VESA_MODE_119
204	bool "1280x1024 32k-color (1:5:5:5)"
205
206config FRAMEBUFFER_VESA_MODE_11A
207	bool "1280x1024 64k-color (5:6:5)"
208
209config FRAMEBUFFER_VESA_MODE_11B
210	bool "1280x1024 16.8M-color (8:8:8)"
211
212config FRAMEBUFFER_VESA_MODE_USER
213	bool "Manually select VESA mode"
214
215endchoice
216
217# Map the config names to an integer (KB).
218config FRAMEBUFFER_VESA_MODE
219	prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER
220	hex
221	default 0x100 if FRAMEBUFFER_VESA_MODE_100
222	default 0x101 if FRAMEBUFFER_VESA_MODE_101
223	default 0x102 if FRAMEBUFFER_VESA_MODE_102
224	default 0x103 if FRAMEBUFFER_VESA_MODE_103
225	default 0x104 if FRAMEBUFFER_VESA_MODE_104
226	default 0x105 if FRAMEBUFFER_VESA_MODE_105
227	default 0x106 if FRAMEBUFFER_VESA_MODE_106
228	default 0x107 if FRAMEBUFFER_VESA_MODE_107
229	default 0x108 if FRAMEBUFFER_VESA_MODE_108
230	default 0x109 if FRAMEBUFFER_VESA_MODE_109
231	default 0x10A if FRAMEBUFFER_VESA_MODE_10A
232	default 0x10B if FRAMEBUFFER_VESA_MODE_10B
233	default 0x10C if FRAMEBUFFER_VESA_MODE_10C
234	default 0x10D if FRAMEBUFFER_VESA_MODE_10D
235	default 0x10E if FRAMEBUFFER_VESA_MODE_10E
236	default 0x10F if FRAMEBUFFER_VESA_MODE_10F
237	default 0x110 if FRAMEBUFFER_VESA_MODE_110
238	default 0x111 if FRAMEBUFFER_VESA_MODE_111
239	default 0x112 if FRAMEBUFFER_VESA_MODE_112
240	default 0x113 if FRAMEBUFFER_VESA_MODE_113
241	default 0x114 if FRAMEBUFFER_VESA_MODE_114
242	default 0x115 if FRAMEBUFFER_VESA_MODE_115
243	default 0x116 if FRAMEBUFFER_VESA_MODE_116
244	default 0x117 if FRAMEBUFFER_VESA_MODE_117
245	default 0x118 if FRAMEBUFFER_VESA_MODE_118
246	default 0x119 if FRAMEBUFFER_VESA_MODE_119
247	default 0x11A if FRAMEBUFFER_VESA_MODE_11A
248	default 0x11B if FRAMEBUFFER_VESA_MODE_11B
249	default 0x117 if FRAMEBUFFER_VESA_MODE_USER
250
251config VIDEO_LCD_ANX9804
252	bool "ANX9804 bridge chip"
253	default n
254	---help---
255	Support for the ANX9804 bridge chip, which can take pixel data coming
256	from a parallel LCD interface and translate it on the fy into a DP
257	interface for driving eDP TFT displays. It uses I2C for configuration.
258
259config VIDEO_LCD_SSD2828
260	bool "SSD2828 bridge chip"
261	default n
262	---help---
263	Support for the SSD2828 bridge chip, which can take pixel data coming
264	from a parallel LCD interface and translate it on the fly into MIPI DSI
265	interface for driving a MIPI compatible LCD panel. It uses SPI for
266	configuration.
267
268config VIDEO_LCD_SSD2828_TX_CLK
269	int "SSD2828 TX_CLK frequency (in MHz)"
270	depends on VIDEO_LCD_SSD2828
271	default 0
272	---help---
273	The frequency of the crystal, which is clocking SSD2828. It may be
274	anything in the 8MHz-30MHz range and the exact value should be
275	retrieved from the board schematics. Or in the case of Allwinner
276	hardware, it can be usually found as 'lcd_xtal_freq' variable in
277	FEX files. It can be also set to 0 for selecting PCLK from the
278	parallel LCD interface instead of TX_CLK as the PLL clock source.
279
280config VIDEO_LCD_SSD2828_RESET
281	string "RESET pin of SSD2828"
282	depends on VIDEO_LCD_SSD2828
283	default ""
284	---help---
285	The reset pin of SSD2828 chip. This takes a string in the format
286	understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
287
288config VIDEO_LCD_HITACHI_TX18D42VM
289	bool "Hitachi tx18d42vm LVDS LCD panel support"
290	depends on VIDEO
291	default n
292	---help---
293	Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a
294	lcd controller which needs to be initialized over SPI, once that is
295	done they work like a regular LVDS panel.
296
297config VIDEO_LCD_SPI_CS
298	string "SPI CS pin for LCD related config job"
299	depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
300	default ""
301	---help---
302	This is one of the SPI communication pins, involved in setting up a
303	working LCD configuration. The exact role of SPI may differ for
304	different hardware setups. The option takes a string in the format
305	understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
306
307config VIDEO_LCD_SPI_SCLK
308	string "SPI SCLK pin for LCD related config job"
309	depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
310	default ""
311	---help---
312	This is one of the SPI communication pins, involved in setting up a
313	working LCD configuration. The exact role of SPI may differ for
314	different hardware setups. The option takes a string in the format
315	understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
316
317config VIDEO_LCD_SPI_MOSI
318	string "SPI MOSI pin for LCD related config job"
319	depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
320	default ""
321	---help---
322	This is one of the SPI communication pins, involved in setting up a
323	working LCD configuration. The exact role of SPI may differ for
324	different hardware setups. The option takes a string in the format
325	understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
326
327config VIDEO_LCD_SPI_MISO
328	string "SPI MISO pin for LCD related config job (optional)"
329	depends on VIDEO_LCD_SSD2828
330	default ""
331	---help---
332	This is one of the SPI communication pins, involved in setting up a
333	working LCD configuration. The exact role of SPI may differ for
334	different hardware setups. If wired up, this pin may provide additional
335	useful functionality. Such as bi-directional communication with the
336	hardware and LCD panel id retrieval (if the panel can report it). The
337	option takes a string in the format understood by 'name_to_gpio'
338	function, e.g. PH1 for pin 1 of port H.
339
340config VIDEO_MVEBU
341	bool "Armada XP LCD controller"
342	default n
343	---help---
344	Support for the LCD controller integrated in the Marvell
345	Armada XP SoC.
346
347config I2C_EDID
348	bool "Enable EDID library"
349	depends on DM_I2C
350	default n
351	help
352	   This enables library for accessing EDID data from an LCD panel.
353
354config DISPLAY
355	bool "Enable Display support"
356	depends on DM
357	default n
358	select I2C_EDID
359	help
360	   This supports drivers that provide a display, such as eDP (Embedded
361	   DisplayPort) and HDMI (High Definition Multimedia Interface).
362	   The devices provide a simple interface to start up the display,
363	   read display information and enable it.
364
365config VIDEO_BROADWELL_IGD
366	bool "Enable Intel Broadwell integrated graphics device"
367	depends on X86
368	help
369	  This enabled support for integrated graphics on Intel broadwell
370	  devices. Initialisation is mostly performed by a VGA boot ROM, with
371	  some setup handled by U-Boot itself. The graphics adaptor works as
372	  a VESA device and supports LCD panels, eDP and LVDS outputs.
373	  Configuration of most aspects of device operation is performed using
374	  a special tool which configures the VGA ROM, but the graphics
375	  resolution can be selected in U-Boot.
376
377config VIDEO_ROCKCHIP
378	bool "Enable Rockchip video support"
379	depends on DM_VIDEO
380	help
381	   Rockchip SoCs provide video output capabilities for High-Definition
382	   Multimedia Interface (HDMI), Low-voltage Differential Signalling
383	   (LVDS), embedded DisplayPort (eDP) and Display Serial Interface
384	   (DSI). This driver supports the on-chip video output device, and
385	   targets the Rockchip RK3288.
386
387config VIDEO_SANDBOX_SDL
388	bool "Enable sandbox video console using SDL"
389	depends on SANDBOX
390	help
391	  When using sandbox you can enable an emulated LCD display which
392	  appears as an SDL (Simple DirectMedia Layer) window. This is a
393	  console device and can display stdout output. Within U-Boot is is
394	  a normal bitmap display and can display images as well as text.
395
396config VIDEO_TEGRA20
397	bool "Enable LCD support on Tegra20"
398	depends on OF_CONTROL
399	help
400	   Tegra20 supports video output to an attached LCD panel as well as
401	   other options such as HDMI. Only the LCD is supported in U-Boot.
402	   This option enables this support which can be used on devices which
403	   have an LCD display connected.
404
405config VIDEO_TEGRA124
406	bool "Enable video support on Tegra124"
407	depends on DM_VIDEO
408	help
409	   Tegra124 supports many video output options including eDP and
410	   HDMI. At present only eDP is supported by U-Boot. This option
411	   enables this support which can be used on devices which
412	   have an eDP display connected.
413
414source "drivers/video/bridge/Kconfig"
415
416endmenu
417