1 /* 2 * Microchip PIC32 MUSB "glue layer" 3 * 4 * Copyright (C) 2015, Microchip Technology Inc. 5 * Cristian Birsan <cristian.birsan@microchip.com> 6 * Purna Chandra Mandal <purna.mandal@microchip.com> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 * 10 * Based on the dsps "glue layer" code. 11 */ 12 13 #include <common.h> 14 #include <linux/usb/musb.h> 15 #include "linux-compat.h" 16 #include "musb_core.h" 17 #include "musb_uboot.h" 18 19 DECLARE_GLOBAL_DATA_PTR; 20 21 #define PIC32_TX_EP_MASK 0x0f /* EP0 + 7 Tx EPs */ 22 #define PIC32_RX_EP_MASK 0x0e /* 7 Rx EPs */ 23 24 #define MUSB_SOFTRST 0x7f 25 #define MUSB_SOFTRST_NRST BIT(0) 26 #define MUSB_SOFTRST_NRSTX BIT(1) 27 28 #define USBCRCON 0 29 #define USBCRCON_USBWKUPEN BIT(0) /* Enable Wakeup Interrupt */ 30 #define USBCRCON_USBRIE BIT(1) /* Enable Remote resume Interrupt */ 31 #define USBCRCON_USBIE BIT(2) /* Enable USB General interrupt */ 32 #define USBCRCON_SENDMONEN BIT(3) /* Enable Session End VBUS monitoring */ 33 #define USBCRCON_BSVALMONEN BIT(4) /* Enable B-Device VBUS monitoring */ 34 #define USBCRCON_ASVALMONEN BIT(5) /* Enable A-Device VBUS monitoring */ 35 #define USBCRCON_VBUSMONEN BIT(6) /* Enable VBUS monitoring */ 36 #define USBCRCON_PHYIDEN BIT(7) /* PHY ID monitoring enable */ 37 #define USBCRCON_USBIDVAL BIT(8) /* USB ID value */ 38 #define USBCRCON_USBIDOVEN BIT(9) /* USB ID override enable */ 39 #define USBCRCON_USBWK BIT(24) /* USB Wakeup Status */ 40 #define USBCRCON_USBRF BIT(25) /* USB Resume Status */ 41 #define USBCRCON_USBIF BIT(26) /* USB General Interrupt Status */ 42 43 /* PIC32 controller data */ 44 struct pic32_musb_data { 45 struct musb_host_data mdata; 46 struct device dev; 47 void __iomem *musb_glue; 48 }; 49 50 #define to_pic32_musb_data(d) \ 51 container_of(d, struct pic32_musb_data, dev) 52 53 static void pic32_musb_disable(struct musb *musb) 54 { 55 /* no way to shut the controller */ 56 } 57 58 static int pic32_musb_enable(struct musb *musb) 59 { 60 /* soft reset by NRSTx */ 61 musb_writeb(musb->mregs, MUSB_SOFTRST, MUSB_SOFTRST_NRSTX); 62 /* set mode */ 63 musb_platform_set_mode(musb, musb->board_mode); 64 65 return 0; 66 } 67 68 static irqreturn_t pic32_interrupt(int irq, void *hci) 69 { 70 struct musb *musb = hci; 71 irqreturn_t ret = IRQ_NONE; 72 u32 epintr, usbintr; 73 74 /* ack usb core interrupts */ 75 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); 76 if (musb->int_usb) 77 musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb); 78 79 /* ack endpoint interrupts */ 80 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX) & PIC32_RX_EP_MASK; 81 if (musb->int_rx) 82 musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx); 83 84 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX) & PIC32_TX_EP_MASK; 85 if (musb->int_tx) 86 musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx); 87 88 /* drop spurious RX and TX if device is disconnected */ 89 if (musb->int_usb & MUSB_INTR_DISCONNECT) { 90 musb->int_tx = 0; 91 musb->int_rx = 0; 92 } 93 94 if (musb->int_tx || musb->int_rx || musb->int_usb) 95 ret = musb_interrupt(musb); 96 97 return ret; 98 } 99 100 static int pic32_musb_set_mode(struct musb *musb, u8 mode) 101 { 102 struct device *dev = musb->controller; 103 struct pic32_musb_data *pdata = to_pic32_musb_data(dev); 104 105 switch (mode) { 106 case MUSB_HOST: 107 clrsetbits_le32(pdata->musb_glue + USBCRCON, 108 USBCRCON_USBIDVAL, USBCRCON_USBIDOVEN); 109 break; 110 case MUSB_PERIPHERAL: 111 setbits_le32(pdata->musb_glue + USBCRCON, 112 USBCRCON_USBIDVAL | USBCRCON_USBIDOVEN); 113 break; 114 case MUSB_OTG: 115 dev_err(dev, "support for OTG is unimplemented\n"); 116 break; 117 default: 118 dev_err(dev, "unsupported mode %d\n", mode); 119 return -EINVAL; 120 } 121 122 return 0; 123 } 124 125 static int pic32_musb_init(struct musb *musb) 126 { 127 struct pic32_musb_data *pdata = to_pic32_musb_data(musb->controller); 128 u32 ctrl, hwvers; 129 u8 power; 130 131 /* Returns zero if not clocked */ 132 hwvers = musb_read_hwvers(musb->mregs); 133 if (!hwvers) 134 return -ENODEV; 135 136 /* Reset the musb */ 137 power = musb_readb(musb->mregs, MUSB_POWER); 138 power = power | MUSB_POWER_RESET; 139 musb_writeb(musb->mregs, MUSB_POWER, power); 140 mdelay(100); 141 142 /* Start the on-chip PHY and its PLL. */ 143 power = power & ~MUSB_POWER_RESET; 144 musb_writeb(musb->mregs, MUSB_POWER, power); 145 146 musb->isr = pic32_interrupt; 147 148 ctrl = USBCRCON_USBIF | USBCRCON_USBRF | 149 USBCRCON_USBWK | USBCRCON_USBIDOVEN | 150 USBCRCON_PHYIDEN | USBCRCON_USBIE | 151 USBCRCON_USBRIE | USBCRCON_USBWKUPEN | 152 USBCRCON_VBUSMONEN; 153 writel(ctrl, pdata->musb_glue + USBCRCON); 154 155 return 0; 156 } 157 158 /* PIC32 supports only 32bit read operation */ 159 void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) 160 { 161 void __iomem *fifo = hw_ep->fifo; 162 u32 val, rem = len % 4; 163 164 /* USB stack ensures dst is always 32bit aligned. */ 165 readsl(fifo, dst, len / 4); 166 if (rem) { 167 dst += len & ~0x03; 168 val = musb_readl(fifo, 0); 169 memcpy(dst, &val, rem); 170 } 171 } 172 173 const struct musb_platform_ops pic32_musb_ops = { 174 .init = pic32_musb_init, 175 .set_mode = pic32_musb_set_mode, 176 .disable = pic32_musb_disable, 177 .enable = pic32_musb_enable, 178 }; 179 180 /* PIC32 default FIFO config - fits in 8KB */ 181 static struct musb_fifo_cfg pic32_musb_fifo_config[] = { 182 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, 183 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, 184 { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, 185 { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, 186 { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, 187 { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, 188 { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, 189 { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, 190 { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, 191 { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, 192 { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, }, 193 { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, }, 194 { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, }, 195 { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, }, 196 }; 197 198 static struct musb_hdrc_config pic32_musb_config = { 199 .fifo_cfg = pic32_musb_fifo_config, 200 .fifo_cfg_size = ARRAY_SIZE(pic32_musb_fifo_config), 201 .multipoint = 1, 202 .dyn_fifo = 1, 203 .num_eps = 8, 204 .ram_bits = 11, 205 }; 206 207 /* PIC32 has one MUSB controller which can be host or gadget */ 208 static struct musb_hdrc_platform_data pic32_musb_plat = { 209 .mode = MUSB_HOST, 210 .config = &pic32_musb_config, 211 .power = 250, /* 500mA */ 212 .platform_ops = &pic32_musb_ops, 213 }; 214 215 static int musb_usb_probe(struct udevice *dev) 216 { 217 struct usb_bus_priv *priv = dev_get_uclass_priv(dev); 218 struct pic32_musb_data *pdata = dev_get_priv(dev); 219 struct musb_host_data *mdata = &pdata->mdata; 220 struct fdt_resource mc, glue; 221 void *fdt = (void *)gd->fdt_blob; 222 int node = dev->of_offset; 223 void __iomem *mregs; 224 int ret; 225 226 priv->desc_before_addr = true; 227 228 ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", 229 "mc", &mc); 230 if (ret < 0) { 231 printf("pic32-musb: resource \"mc\" not found\n"); 232 return ret; 233 } 234 235 ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", 236 "control", &glue); 237 if (ret < 0) { 238 printf("pic32-musb: resource \"control\" not found\n"); 239 return ret; 240 } 241 242 mregs = ioremap(mc.start, fdt_resource_size(&mc)); 243 pdata->musb_glue = ioremap(glue.start, fdt_resource_size(&glue)); 244 245 /* init controller */ 246 #ifdef CONFIG_USB_MUSB_HOST 247 mdata->host = musb_init_controller(&pic32_musb_plat, 248 &pdata->dev, mregs); 249 if (!mdata->host) 250 return -EIO; 251 252 ret = musb_lowlevel_init(mdata); 253 #else 254 pic32_musb_plat.mode = MUSB_PERIPHERAL; 255 ret = musb_register(&pic32_musb_plat, &pdata->dev, mregs); 256 #endif 257 if (ret == 0) 258 printf("PIC32 MUSB OTG\n"); 259 260 return ret; 261 } 262 263 static int musb_usb_remove(struct udevice *dev) 264 { 265 struct pic32_musb_data *pdata = dev_get_priv(dev); 266 267 musb_stop(pdata->mdata.host); 268 269 return 0; 270 } 271 272 static const struct udevice_id pic32_musb_ids[] = { 273 { .compatible = "microchip,pic32mzda-usb" }, 274 { } 275 }; 276 277 U_BOOT_DRIVER(usb_musb) = { 278 .name = "pic32-musb", 279 .id = UCLASS_USB, 280 .of_match = pic32_musb_ids, 281 .probe = musb_usb_probe, 282 .remove = musb_usb_remove, 283 #ifdef CONFIG_USB_MUSB_HOST 284 .ops = &musb_usb_ops, 285 #endif 286 .platdata_auto_alloc_size = sizeof(struct usb_platdata), 287 .priv_auto_alloc_size = sizeof(struct pic32_musb_data), 288 }; 289