1 /* 2 * Copyright (C) 2005-2007 by Texas Instruments 3 * Some code has been taken from tusb6010.c 4 * Copyrights for that are attributable to: 5 * Copyright (C) 2006 Nokia Corporation 6 * Tony Lindgren <tony@atomide.com> 7 * 8 * This file is part of the Inventra Controller Driver for Linux. 9 * 10 * The Inventra Controller Driver for Linux is free software; you 11 * can redistribute it and/or modify it under the terms of the GNU 12 * General Public License version 2 as published by the Free Software 13 * Foundation. 14 * 15 * The Inventra Controller Driver for Linux is distributed in 16 * the hope that it will be useful, but WITHOUT ANY WARRANTY; 17 * without even the implied warranty of MERCHANTABILITY or 18 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 19 * License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with The Inventra Controller Driver for Linux ; if not, 23 * write to the Free Software Foundation, Inc., 59 Temple Place, 24 * Suite 330, Boston, MA 02111-1307 USA 25 * 26 */ 27 #ifndef __UBOOT__ 28 #include <linux/module.h> 29 #include <linux/kernel.h> 30 #include <linux/sched.h> 31 #include <linux/init.h> 32 #include <linux/list.h> 33 #include <linux/io.h> 34 #include <linux/platform_device.h> 35 #include <linux/dma-mapping.h> 36 #include <linux/pm_runtime.h> 37 #include <linux/err.h> 38 #include <linux/usb/musb-omap.h> 39 #else 40 #include <common.h> 41 #include <asm/omap_musb.h> 42 #include <twl4030.h> 43 #include "linux-compat.h" 44 #endif 45 46 #include "musb_core.h" 47 #include "omap2430.h" 48 49 #ifndef __UBOOT__ 50 struct omap2430_glue { 51 struct device *dev; 52 struct platform_device *musb; 53 enum omap_musb_vbus_id_status status; 54 struct work_struct omap_musb_mailbox_work; 55 }; 56 #define glue_to_musb(g) platform_get_drvdata(g->musb) 57 58 struct omap2430_glue *_glue; 59 60 static struct timer_list musb_idle_timer; 61 62 static void musb_do_idle(unsigned long _musb) 63 { 64 struct musb *musb = (void *)_musb; 65 unsigned long flags; 66 u8 power; 67 u8 devctl; 68 69 spin_lock_irqsave(&musb->lock, flags); 70 71 switch (musb->xceiv->state) { 72 case OTG_STATE_A_WAIT_BCON: 73 74 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 75 if (devctl & MUSB_DEVCTL_BDEVICE) { 76 musb->xceiv->state = OTG_STATE_B_IDLE; 77 MUSB_DEV_MODE(musb); 78 } else { 79 musb->xceiv->state = OTG_STATE_A_IDLE; 80 MUSB_HST_MODE(musb); 81 } 82 break; 83 case OTG_STATE_A_SUSPEND: 84 /* finish RESUME signaling? */ 85 if (musb->port1_status & MUSB_PORT_STAT_RESUME) { 86 power = musb_readb(musb->mregs, MUSB_POWER); 87 power &= ~MUSB_POWER_RESUME; 88 dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power); 89 musb_writeb(musb->mregs, MUSB_POWER, power); 90 musb->is_active = 1; 91 musb->port1_status &= ~(USB_PORT_STAT_SUSPEND 92 | MUSB_PORT_STAT_RESUME); 93 musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; 94 usb_hcd_poll_rh_status(musb_to_hcd(musb)); 95 /* NOTE: it might really be A_WAIT_BCON ... */ 96 musb->xceiv->state = OTG_STATE_A_HOST; 97 } 98 break; 99 case OTG_STATE_A_HOST: 100 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 101 if (devctl & MUSB_DEVCTL_BDEVICE) 102 musb->xceiv->state = OTG_STATE_B_IDLE; 103 else 104 musb->xceiv->state = OTG_STATE_A_WAIT_BCON; 105 default: 106 break; 107 } 108 spin_unlock_irqrestore(&musb->lock, flags); 109 } 110 111 112 static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout) 113 { 114 unsigned long default_timeout = jiffies + msecs_to_jiffies(3); 115 static unsigned long last_timer; 116 117 if (timeout == 0) 118 timeout = default_timeout; 119 120 /* Never idle if active, or when VBUS timeout is not set as host */ 121 if (musb->is_active || ((musb->a_wait_bcon == 0) 122 && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) { 123 dev_dbg(musb->controller, "%s active, deleting timer\n", 124 otg_state_string(musb->xceiv->state)); 125 del_timer(&musb_idle_timer); 126 last_timer = jiffies; 127 return; 128 } 129 130 if (time_after(last_timer, timeout)) { 131 if (!timer_pending(&musb_idle_timer)) 132 last_timer = timeout; 133 else { 134 dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n"); 135 return; 136 } 137 } 138 last_timer = timeout; 139 140 dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n", 141 otg_state_string(musb->xceiv->state), 142 (unsigned long)jiffies_to_msecs(timeout - jiffies)); 143 mod_timer(&musb_idle_timer, timeout); 144 } 145 146 static void omap2430_musb_set_vbus(struct musb *musb, int is_on) 147 { 148 struct usb_otg *otg = musb->xceiv->otg; 149 u8 devctl; 150 unsigned long timeout = jiffies + msecs_to_jiffies(1000); 151 int ret = 1; 152 /* HDRC controls CPEN, but beware current surges during device 153 * connect. They can trigger transient overcurrent conditions 154 * that must be ignored. 155 */ 156 157 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 158 159 if (is_on) { 160 if (musb->xceiv->state == OTG_STATE_A_IDLE) { 161 /* start the session */ 162 devctl |= MUSB_DEVCTL_SESSION; 163 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 164 /* 165 * Wait for the musb to set as A device to enable the 166 * VBUS 167 */ 168 while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) { 169 170 cpu_relax(); 171 172 if (time_after(jiffies, timeout)) { 173 dev_err(musb->controller, 174 "configured as A device timeout"); 175 ret = -EINVAL; 176 break; 177 } 178 } 179 180 if (ret && otg->set_vbus) 181 otg_set_vbus(otg, 1); 182 } else { 183 musb->is_active = 1; 184 otg->default_a = 1; 185 musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; 186 devctl |= MUSB_DEVCTL_SESSION; 187 MUSB_HST_MODE(musb); 188 } 189 } else { 190 musb->is_active = 0; 191 192 /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and 193 * jumping right to B_IDLE... 194 */ 195 196 otg->default_a = 0; 197 musb->xceiv->state = OTG_STATE_B_IDLE; 198 devctl &= ~MUSB_DEVCTL_SESSION; 199 200 MUSB_DEV_MODE(musb); 201 } 202 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 203 204 dev_dbg(musb->controller, "VBUS %s, devctl %02x " 205 /* otg %3x conf %08x prcm %08x */ "\n", 206 otg_state_string(musb->xceiv->state), 207 musb_readb(musb->mregs, MUSB_DEVCTL)); 208 } 209 210 static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode) 211 { 212 u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 213 214 devctl |= MUSB_DEVCTL_SESSION; 215 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 216 217 return 0; 218 } 219 #endif 220 221 static inline void omap2430_low_level_exit(struct musb *musb) 222 { 223 u32 l; 224 225 /* in any role */ 226 l = musb_readl(musb->mregs, OTG_FORCESTDBY); 227 l |= ENABLEFORCE; /* enable MSTANDBY */ 228 musb_writel(musb->mregs, OTG_FORCESTDBY, l); 229 } 230 231 static inline void omap2430_low_level_init(struct musb *musb) 232 { 233 u32 l; 234 235 l = musb_readl(musb->mregs, OTG_FORCESTDBY); 236 l &= ~ENABLEFORCE; /* disable MSTANDBY */ 237 musb_writel(musb->mregs, OTG_FORCESTDBY, l); 238 } 239 240 #ifndef __UBOOT__ 241 void omap_musb_mailbox(enum omap_musb_vbus_id_status status) 242 { 243 struct omap2430_glue *glue = _glue; 244 struct musb *musb = glue_to_musb(glue); 245 246 glue->status = status; 247 if (!musb) { 248 dev_err(glue->dev, "musb core is not yet ready\n"); 249 return; 250 } 251 252 schedule_work(&glue->omap_musb_mailbox_work); 253 } 254 EXPORT_SYMBOL_GPL(omap_musb_mailbox); 255 256 static void omap_musb_set_mailbox(struct omap2430_glue *glue) 257 { 258 struct musb *musb = glue_to_musb(glue); 259 struct device *dev = musb->controller; 260 struct musb_hdrc_platform_data *pdata = dev->platform_data; 261 struct omap_musb_board_data *data = pdata->board_data; 262 struct usb_otg *otg = musb->xceiv->otg; 263 264 switch (glue->status) { 265 case OMAP_MUSB_ID_GROUND: 266 dev_dbg(dev, "ID GND\n"); 267 268 otg->default_a = true; 269 musb->xceiv->state = OTG_STATE_A_IDLE; 270 musb->xceiv->last_event = USB_EVENT_ID; 271 if (!is_otg_enabled(musb) || musb->gadget_driver) { 272 pm_runtime_get_sync(dev); 273 usb_phy_init(musb->xceiv); 274 omap2430_musb_set_vbus(musb, 1); 275 } 276 break; 277 278 case OMAP_MUSB_VBUS_VALID: 279 dev_dbg(dev, "VBUS Connect\n"); 280 281 otg->default_a = false; 282 musb->xceiv->state = OTG_STATE_B_IDLE; 283 musb->xceiv->last_event = USB_EVENT_VBUS; 284 if (musb->gadget_driver) 285 pm_runtime_get_sync(dev); 286 usb_phy_init(musb->xceiv); 287 break; 288 289 case OMAP_MUSB_ID_FLOAT: 290 case OMAP_MUSB_VBUS_OFF: 291 dev_dbg(dev, "VBUS Disconnect\n"); 292 293 musb->xceiv->last_event = USB_EVENT_NONE; 294 if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) 295 if (musb->gadget_driver) { 296 pm_runtime_mark_last_busy(dev); 297 pm_runtime_put_autosuspend(dev); 298 } 299 300 if (data->interface_type == MUSB_INTERFACE_UTMI) { 301 if (musb->xceiv->otg->set_vbus) 302 otg_set_vbus(musb->xceiv->otg, 0); 303 } 304 usb_phy_shutdown(musb->xceiv); 305 break; 306 default: 307 dev_dbg(dev, "ID float\n"); 308 } 309 } 310 311 312 static void omap_musb_mailbox_work(struct work_struct *mailbox_work) 313 { 314 struct omap2430_glue *glue = container_of(mailbox_work, 315 struct omap2430_glue, omap_musb_mailbox_work); 316 omap_musb_set_mailbox(glue); 317 } 318 #endif 319 320 static int omap2430_musb_init(struct musb *musb) 321 { 322 u32 l; 323 int status = 0; 324 unsigned long int start; 325 #ifndef __UBOOT__ 326 struct device *dev = musb->controller; 327 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 328 struct musb_hdrc_platform_data *plat = dev->platform_data; 329 struct omap_musb_board_data *data = plat->board_data; 330 #else 331 struct omap_musb_board_data *data = 332 (struct omap_musb_board_data *)musb->controller; 333 #endif 334 335 /* Reset the controller */ 336 musb_writel(musb->mregs, OTG_SYSCONFIG, SOFTRST); 337 338 start = get_timer(0); 339 340 while (1) { 341 l = musb_readl(musb->mregs, OTG_SYSCONFIG); 342 if ((l & SOFTRST) == 0) 343 break; 344 345 if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) { 346 dev_err(musb->controller, "MUSB reset is taking too long\n"); 347 return -ENODEV; 348 } 349 } 350 351 #ifndef __UBOOT__ 352 /* We require some kind of external transceiver, hooked 353 * up through ULPI. TWL4030-family PMICs include one, 354 * which needs a driver, drivers aren't always needed. 355 */ 356 musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); 357 if (IS_ERR_OR_NULL(musb->xceiv)) { 358 pr_err("HS USB OTG: no transceiver configured\n"); 359 return -ENODEV; 360 } 361 362 status = pm_runtime_get_sync(dev); 363 if (status < 0) { 364 dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status); 365 goto err1; 366 } 367 #endif 368 369 l = musb_readl(musb->mregs, OTG_INTERFSEL); 370 371 if (data->interface_type == MUSB_INTERFACE_UTMI) { 372 /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */ 373 l &= ~ULPI_12PIN; /* Disable ULPI */ 374 l |= UTMI_8BIT; /* Enable UTMI */ 375 } else { 376 l |= ULPI_12PIN; 377 } 378 379 musb_writel(musb->mregs, OTG_INTERFSEL, l); 380 381 pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, " 382 "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n", 383 musb_readl(musb->mregs, OTG_REVISION), 384 musb_readl(musb->mregs, OTG_SYSCONFIG), 385 musb_readl(musb->mregs, OTG_SYSSTATUS), 386 musb_readl(musb->mregs, OTG_INTERFSEL), 387 musb_readl(musb->mregs, OTG_SIMENABLE)); 388 389 #ifndef __UBOOT__ 390 setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); 391 392 if (glue->status != OMAP_MUSB_UNKNOWN) 393 omap_musb_set_mailbox(glue); 394 395 pm_runtime_put_noidle(musb->controller); 396 #endif 397 return 0; 398 399 err1: 400 return status; 401 } 402 403 #ifndef __UBOOT__ 404 static void omap2430_musb_enable(struct musb *musb) 405 #else 406 static int omap2430_musb_enable(struct musb *musb) 407 #endif 408 { 409 #ifndef __UBOOT__ 410 u8 devctl; 411 unsigned long timeout = jiffies + msecs_to_jiffies(1000); 412 struct device *dev = musb->controller; 413 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 414 struct musb_hdrc_platform_data *pdata = dev->platform_data; 415 struct omap_musb_board_data *data = pdata->board_data; 416 417 switch (glue->status) { 418 419 case OMAP_MUSB_ID_GROUND: 420 usb_phy_init(musb->xceiv); 421 if (data->interface_type != MUSB_INTERFACE_UTMI) 422 break; 423 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 424 /* start the session */ 425 devctl |= MUSB_DEVCTL_SESSION; 426 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 427 while (musb_readb(musb->mregs, MUSB_DEVCTL) & 428 MUSB_DEVCTL_BDEVICE) { 429 cpu_relax(); 430 431 if (time_after(jiffies, timeout)) { 432 dev_err(dev, "configured as A device timeout"); 433 break; 434 } 435 } 436 break; 437 438 case OMAP_MUSB_VBUS_VALID: 439 usb_phy_init(musb->xceiv); 440 break; 441 442 default: 443 break; 444 } 445 #else 446 #ifdef CONFIG_TWL4030_USB 447 if (twl4030_usb_ulpi_init()) { 448 serial_printf("ERROR: %s Could not initialize PHY\n", 449 __PRETTY_FUNCTION__); 450 } 451 #endif 452 return 0; 453 #endif 454 } 455 456 static void omap2430_musb_disable(struct musb *musb) 457 { 458 #ifndef __UBOOT__ 459 struct device *dev = musb->controller; 460 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 461 462 if (glue->status != OMAP_MUSB_UNKNOWN) 463 usb_phy_shutdown(musb->xceiv); 464 #endif 465 } 466 467 static int omap2430_musb_exit(struct musb *musb) 468 { 469 del_timer_sync(&musb_idle_timer); 470 471 omap2430_low_level_exit(musb); 472 473 return 0; 474 } 475 476 #ifndef __UBOOT__ 477 static const struct musb_platform_ops omap2430_ops = { 478 #else 479 const struct musb_platform_ops omap2430_ops = { 480 #endif 481 .init = omap2430_musb_init, 482 .exit = omap2430_musb_exit, 483 484 #ifndef __UBOOT__ 485 .set_mode = omap2430_musb_set_mode, 486 .try_idle = omap2430_musb_try_idle, 487 488 .set_vbus = omap2430_musb_set_vbus, 489 #endif 490 491 .enable = omap2430_musb_enable, 492 .disable = omap2430_musb_disable, 493 }; 494 495 #ifndef __UBOOT__ 496 static u64 omap2430_dmamask = DMA_BIT_MASK(32); 497 498 static int __devinit omap2430_probe(struct platform_device *pdev) 499 { 500 struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; 501 struct platform_device *musb; 502 struct omap2430_glue *glue; 503 int ret = -ENOMEM; 504 505 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); 506 if (!glue) { 507 dev_err(&pdev->dev, "failed to allocate glue context\n"); 508 goto err0; 509 } 510 511 musb = platform_device_alloc("musb-hdrc", -1); 512 if (!musb) { 513 dev_err(&pdev->dev, "failed to allocate musb device\n"); 514 goto err0; 515 } 516 517 musb->dev.parent = &pdev->dev; 518 musb->dev.dma_mask = &omap2430_dmamask; 519 musb->dev.coherent_dma_mask = omap2430_dmamask; 520 521 glue->dev = &pdev->dev; 522 glue->musb = musb; 523 glue->status = OMAP_MUSB_UNKNOWN; 524 525 pdata->platform_ops = &omap2430_ops; 526 527 platform_set_drvdata(pdev, glue); 528 529 /* 530 * REVISIT if we ever have two instances of the wrapper, we will be 531 * in big trouble 532 */ 533 _glue = glue; 534 535 INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work); 536 537 ret = platform_device_add_resources(musb, pdev->resource, 538 pdev->num_resources); 539 if (ret) { 540 dev_err(&pdev->dev, "failed to add resources\n"); 541 goto err1; 542 } 543 544 ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); 545 if (ret) { 546 dev_err(&pdev->dev, "failed to add platform_data\n"); 547 goto err1; 548 } 549 550 pm_runtime_enable(&pdev->dev); 551 552 ret = platform_device_add(musb); 553 if (ret) { 554 dev_err(&pdev->dev, "failed to register musb device\n"); 555 goto err1; 556 } 557 558 return 0; 559 560 err1: 561 platform_device_put(musb); 562 563 err0: 564 return ret; 565 } 566 567 static int __devexit omap2430_remove(struct platform_device *pdev) 568 { 569 struct omap2430_glue *glue = platform_get_drvdata(pdev); 570 571 cancel_work_sync(&glue->omap_musb_mailbox_work); 572 platform_device_del(glue->musb); 573 platform_device_put(glue->musb); 574 575 return 0; 576 } 577 578 #ifdef CONFIG_PM 579 580 static int omap2430_runtime_suspend(struct device *dev) 581 { 582 struct omap2430_glue *glue = dev_get_drvdata(dev); 583 struct musb *musb = glue_to_musb(glue); 584 585 if (musb) { 586 musb->context.otg_interfsel = musb_readl(musb->mregs, 587 OTG_INTERFSEL); 588 589 omap2430_low_level_exit(musb); 590 usb_phy_set_suspend(musb->xceiv, 1); 591 } 592 593 return 0; 594 } 595 596 static int omap2430_runtime_resume(struct device *dev) 597 { 598 struct omap2430_glue *glue = dev_get_drvdata(dev); 599 struct musb *musb = glue_to_musb(glue); 600 601 if (musb) { 602 omap2430_low_level_init(musb); 603 musb_writel(musb->mregs, OTG_INTERFSEL, 604 musb->context.otg_interfsel); 605 606 usb_phy_set_suspend(musb->xceiv, 0); 607 } 608 609 return 0; 610 } 611 612 static struct dev_pm_ops omap2430_pm_ops = { 613 .runtime_suspend = omap2430_runtime_suspend, 614 .runtime_resume = omap2430_runtime_resume, 615 }; 616 617 #define DEV_PM_OPS (&omap2430_pm_ops) 618 #else 619 #define DEV_PM_OPS NULL 620 #endif 621 622 static struct platform_driver omap2430_driver = { 623 .probe = omap2430_probe, 624 .remove = __devexit_p(omap2430_remove), 625 .driver = { 626 .name = "musb-omap2430", 627 .pm = DEV_PM_OPS, 628 }, 629 }; 630 631 MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer"); 632 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); 633 MODULE_LICENSE("GPL v2"); 634 635 static int __init omap2430_init(void) 636 { 637 return platform_driver_register(&omap2430_driver); 638 } 639 subsys_initcall(omap2430_init); 640 641 static void __exit omap2430_exit(void) 642 { 643 platform_driver_unregister(&omap2430_driver); 644 } 645 module_exit(omap2430_exit); 646 #endif 647