1 /* 2 * MUSB OTG driver DMA controller abstraction 3 * 4 * Copyright 2005 Mentor Graphics Corporation 5 * Copyright (C) 2005-2006 by Texas Instruments 6 * Copyright (C) 2006-2007 Nokia Corporation 7 * 8 * SPDX-License-Identifier: GPL-2.0 9 */ 10 11 #ifndef __MUSB_DMA_H__ 12 #define __MUSB_DMA_H__ 13 14 struct musb_hw_ep; 15 16 /* 17 * DMA Controller Abstraction 18 * 19 * DMA Controllers are abstracted to allow use of a variety of different 20 * implementations of DMA, as allowed by the Inventra USB cores. On the 21 * host side, usbcore sets up the DMA mappings and flushes caches; on the 22 * peripheral side, the gadget controller driver does. Responsibilities 23 * of a DMA controller driver include: 24 * 25 * - Handling the details of moving multiple USB packets 26 * in cooperation with the Inventra USB core, including especially 27 * the correct RX side treatment of short packets and buffer-full 28 * states (both of which terminate transfers). 29 * 30 * - Knowing the correlation between dma channels and the 31 * Inventra core's local endpoint resources and data direction. 32 * 33 * - Maintaining a list of allocated/available channels. 34 * 35 * - Updating channel status on interrupts, 36 * whether shared with the Inventra core or separate. 37 */ 38 39 #define DMA_ADDR_INVALID (~(dma_addr_t)0) 40 41 #ifndef CONFIG_USB_MUSB_PIO_ONLY 42 #define is_dma_capable() (1) 43 #else 44 #define is_dma_capable() (0) 45 #endif 46 47 #ifdef CONFIG_USB_TI_CPPI_DMA 48 #define is_cppi_enabled() 1 49 #else 50 #define is_cppi_enabled() 0 51 #endif 52 53 #ifdef CONFIG_USB_TUSB_OMAP_DMA 54 #define tusb_dma_omap() 1 55 #else 56 #define tusb_dma_omap() 0 57 #endif 58 59 /* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1 60 * Only allow DMA mode 1 to be used when the USB will actually generate the 61 * interrupts we expect. 62 */ 63 #ifdef CONFIG_BLACKFIN 64 # undef USE_MODE1 65 # if !ANOMALY_05000456 66 # define USE_MODE1 67 # endif 68 #endif 69 70 /* 71 * DMA channel status ... updated by the dma controller driver whenever that 72 * status changes, and protected by the overall controller spinlock. 73 */ 74 enum dma_channel_status { 75 /* unallocated */ 76 MUSB_DMA_STATUS_UNKNOWN, 77 /* allocated ... but not busy, no errors */ 78 MUSB_DMA_STATUS_FREE, 79 /* busy ... transactions are active */ 80 MUSB_DMA_STATUS_BUSY, 81 /* transaction(s) aborted due to ... dma or memory bus error */ 82 MUSB_DMA_STATUS_BUS_ABORT, 83 /* transaction(s) aborted due to ... core error or USB fault */ 84 MUSB_DMA_STATUS_CORE_ABORT 85 }; 86 87 struct dma_controller; 88 89 /** 90 * struct dma_channel - A DMA channel. 91 * @private_data: channel-private data 92 * @max_len: the maximum number of bytes the channel can move in one 93 * transaction (typically representing many USB maximum-sized packets) 94 * @actual_len: how many bytes have been transferred 95 * @status: current channel status (updated e.g. on interrupt) 96 * @desired_mode: true if mode 1 is desired; false if mode 0 is desired 97 * 98 * channels are associated with an endpoint for the duration of at least 99 * one usb transfer. 100 */ 101 struct dma_channel { 102 void *private_data; 103 /* FIXME not void* private_data, but a dma_controller * */ 104 size_t max_len; 105 size_t actual_len; 106 enum dma_channel_status status; 107 bool desired_mode; 108 }; 109 110 /* 111 * dma_channel_status - return status of dma channel 112 * @c: the channel 113 * 114 * Returns the software's view of the channel status. If that status is BUSY 115 * then it's possible that the hardware has completed (or aborted) a transfer, 116 * so the driver needs to update that status. 117 */ 118 static inline enum dma_channel_status 119 dma_channel_status(struct dma_channel *c) 120 { 121 return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN; 122 } 123 124 /** 125 * struct dma_controller - A DMA Controller. 126 * @start: call this to start a DMA controller; 127 * return 0 on success, else negative errno 128 * @stop: call this to stop a DMA controller 129 * return 0 on success, else negative errno 130 * @channel_alloc: call this to allocate a DMA channel 131 * @channel_release: call this to release a DMA channel 132 * @channel_abort: call this to abort a pending DMA transaction, 133 * returning it to FREE (but allocated) state 134 * 135 * Controllers manage dma channels. 136 */ 137 struct dma_controller { 138 int (*start)(struct dma_controller *); 139 int (*stop)(struct dma_controller *); 140 struct dma_channel *(*channel_alloc)(struct dma_controller *, 141 struct musb_hw_ep *, u8 is_tx); 142 void (*channel_release)(struct dma_channel *); 143 int (*channel_program)(struct dma_channel *channel, 144 u16 maxpacket, u8 mode, 145 dma_addr_t dma_addr, 146 u32 length); 147 int (*channel_abort)(struct dma_channel *); 148 int (*is_compatible)(struct dma_channel *channel, 149 u16 maxpacket, 150 void *buf, u32 length); 151 }; 152 153 /* called after channel_program(), may indicate a fault */ 154 extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit); 155 156 157 extern struct dma_controller *__init 158 dma_controller_create(struct musb *, void __iomem *); 159 160 extern void dma_controller_destroy(struct dma_controller *); 161 162 #endif /* __MUSB_DMA_H__ */ 163