1 /* 2 * MUSB OTG driver defines 3 * 4 * Copyright 2005 Mentor Graphics Corporation 5 * Copyright (C) 2005-2006 by Texas Instruments 6 * Copyright (C) 2006-2007 Nokia Corporation 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * version 2 as published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, but 13 * WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 20 * 02110-1301 USA 21 * 22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED 23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 */ 34 35 #ifndef __MUSB_CORE_H__ 36 #define __MUSB_CORE_H__ 37 38 #ifndef __UBOOT__ 39 #include <linux/slab.h> 40 #include <linux/list.h> 41 #include <linux/interrupt.h> 42 #include <linux/errno.h> 43 #include <linux/timer.h> 44 #include <linux/device.h> 45 #include <linux/usb.h> 46 #include <linux/usb/otg.h> 47 #else 48 #include <asm/errno.h> 49 #endif 50 #include <linux/usb/ch9.h> 51 #include <linux/usb/gadget.h> 52 #include <linux/usb/musb.h> 53 54 struct musb; 55 struct musb_hw_ep; 56 struct musb_ep; 57 58 /* Helper defines for struct musb->hwvers */ 59 #define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) 60 #define MUSB_HWVERS_MINOR(x) (x & 0x3ff) 61 #define MUSB_HWVERS_RC 0x8000 62 #define MUSB_HWVERS_1300 0x52C 63 #define MUSB_HWVERS_1400 0x590 64 #define MUSB_HWVERS_1800 0x720 65 #define MUSB_HWVERS_1900 0x784 66 #define MUSB_HWVERS_2000 0x800 67 68 #include "musb_debug.h" 69 #include "musb_dma.h" 70 71 #include "musb_io.h" 72 #include "musb_regs.h" 73 74 #include "musb_gadget.h" 75 #ifndef __UBOOT__ 76 #include <linux/usb/hcd.h> 77 #endif 78 #include "musb_host.h" 79 80 #define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST) 81 #define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL) 82 #define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG) 83 84 /* NOTE: otg and peripheral-only state machines start at B_IDLE. 85 * OTG or host-only go to A_IDLE when ID is sensed. 86 */ 87 #define is_peripheral_active(m) (!(m)->is_host) 88 #define is_host_active(m) ((m)->is_host) 89 90 #ifdef CONFIG_PROC_FS 91 #include <linux/fs.h> 92 #define MUSB_CONFIG_PROC_FS 93 #endif 94 95 /****************************** PERIPHERAL ROLE *****************************/ 96 97 #ifndef __UBOOT__ 98 #define is_peripheral_capable() (1) 99 #else 100 #ifdef CONFIG_USB_MUSB_GADGET 101 #define is_peripheral_capable() (1) 102 #else 103 #define is_peripheral_capable() (0) 104 #endif 105 #endif 106 107 extern irqreturn_t musb_g_ep0_irq(struct musb *); 108 extern void musb_g_tx(struct musb *, u8); 109 extern void musb_g_rx(struct musb *, u8); 110 extern void musb_g_reset(struct musb *); 111 extern void musb_g_suspend(struct musb *); 112 extern void musb_g_resume(struct musb *); 113 extern void musb_g_wakeup(struct musb *); 114 extern void musb_g_disconnect(struct musb *); 115 116 /****************************** HOST ROLE ***********************************/ 117 118 #ifndef __UBOOT__ 119 #define is_host_capable() (1) 120 #else 121 #ifdef CONFIG_USB_MUSB_HOST 122 #define is_host_capable() (1) 123 #else 124 #define is_host_capable() (0) 125 #endif 126 #endif 127 128 extern irqreturn_t musb_h_ep0_irq(struct musb *); 129 extern void musb_host_tx(struct musb *, u8); 130 extern void musb_host_rx(struct musb *, u8); 131 132 /****************************** CONSTANTS ********************************/ 133 134 #ifndef MUSB_C_NUM_EPS 135 #define MUSB_C_NUM_EPS ((u8)16) 136 #endif 137 138 #ifndef MUSB_MAX_END0_PACKET 139 #define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE) 140 #endif 141 142 /* host side ep0 states */ 143 enum musb_h_ep0_state { 144 MUSB_EP0_IDLE, 145 MUSB_EP0_START, /* expect ack of setup */ 146 MUSB_EP0_IN, /* expect IN DATA */ 147 MUSB_EP0_OUT, /* expect ack of OUT DATA */ 148 MUSB_EP0_STATUS, /* expect ack of STATUS */ 149 } __attribute__ ((packed)); 150 151 /* peripheral side ep0 states */ 152 enum musb_g_ep0_state { 153 MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */ 154 MUSB_EP0_STAGE_SETUP, /* received SETUP */ 155 MUSB_EP0_STAGE_TX, /* IN data */ 156 MUSB_EP0_STAGE_RX, /* OUT data */ 157 MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */ 158 MUSB_EP0_STAGE_STATUSOUT, /* (after IN data) */ 159 MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */ 160 } __attribute__ ((packed)); 161 162 /* 163 * OTG protocol constants. See USB OTG 1.3 spec, 164 * sections 5.5 "Device Timings" and 6.6.5 "Timers". 165 */ 166 #define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */ 167 #define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */ 168 #define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */ 169 #define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */ 170 171 172 /*************************** REGISTER ACCESS ********************************/ 173 174 /* Endpoint registers (other than dynfifo setup) can be accessed either 175 * directly with the "flat" model, or after setting up an index register. 176 */ 177 178 #if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \ 179 || defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \ 180 || defined(CONFIG_ARCH_OMAP4) 181 /* REVISIT indexed access seemed to 182 * misbehave (on DaVinci) for at least peripheral IN ... 183 */ 184 #define MUSB_FLAT_REG 185 #endif 186 187 /* TUSB mapping: "flat" plus ep0 special cases */ 188 #if defined(CONFIG_USB_MUSB_TUSB6010) || \ 189 defined(CONFIG_USB_MUSB_TUSB6010_MODULE) 190 #define musb_ep_select(_mbase, _epnum) \ 191 musb_writeb((_mbase), MUSB_INDEX, (_epnum)) 192 #define MUSB_EP_OFFSET MUSB_TUSB_OFFSET 193 194 /* "flat" mapping: each endpoint has its own i/o address */ 195 #elif defined(MUSB_FLAT_REG) 196 #define musb_ep_select(_mbase, _epnum) (((void)(_mbase)), ((void)(_epnum))) 197 #define MUSB_EP_OFFSET MUSB_FLAT_OFFSET 198 199 /* "indexed" mapping: INDEX register controls register bank select */ 200 #else 201 #define musb_ep_select(_mbase, _epnum) \ 202 musb_writeb((_mbase), MUSB_INDEX, (_epnum)) 203 #define MUSB_EP_OFFSET MUSB_INDEXED_OFFSET 204 #endif 205 206 /****************************** FUNCTIONS ********************************/ 207 208 #define MUSB_HST_MODE(_musb)\ 209 { (_musb)->is_host = true; } 210 #define MUSB_DEV_MODE(_musb) \ 211 { (_musb)->is_host = false; } 212 213 #define test_devctl_hst_mode(_x) \ 214 (musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM) 215 216 #define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral") 217 218 /******************************** TYPES *************************************/ 219 220 /** 221 * struct musb_platform_ops - Operations passed to musb_core by HW glue layer 222 * @init: turns on clocks, sets up platform-specific registers, etc 223 * @exit: undoes @init 224 * @set_mode: forcefully changes operating mode 225 * @try_ilde: tries to idle the IP 226 * @vbus_status: returns vbus status if possible 227 * @set_vbus: forces vbus status 228 * @adjust_channel_params: pre check for standard dma channel_program func 229 */ 230 struct musb_platform_ops { 231 int (*init)(struct musb *musb); 232 int (*exit)(struct musb *musb); 233 234 #ifndef __UBOOT__ 235 void (*enable)(struct musb *musb); 236 #else 237 int (*enable)(struct musb *musb); 238 #endif 239 void (*disable)(struct musb *musb); 240 241 int (*set_mode)(struct musb *musb, u8 mode); 242 void (*try_idle)(struct musb *musb, unsigned long timeout); 243 244 int (*vbus_status)(struct musb *musb); 245 void (*set_vbus)(struct musb *musb, int on); 246 247 int (*adjust_channel_params)(struct dma_channel *channel, 248 u16 packet_sz, u8 *mode, 249 dma_addr_t *dma_addr, u32 *len); 250 }; 251 252 /* 253 * struct musb_hw_ep - endpoint hardware (bidirectional) 254 * 255 * Ordered slightly for better cacheline locality. 256 */ 257 struct musb_hw_ep { 258 struct musb *musb; 259 void __iomem *fifo; 260 void __iomem *regs; 261 262 #if defined(CONFIG_USB_MUSB_TUSB6010) || \ 263 defined(CONFIG_USB_MUSB_TUSB6010_MODULE) 264 void __iomem *conf; 265 #endif 266 267 /* index in musb->endpoints[] */ 268 u8 epnum; 269 270 /* hardware configuration, possibly dynamic */ 271 bool is_shared_fifo; 272 bool tx_double_buffered; 273 bool rx_double_buffered; 274 u16 max_packet_sz_tx; 275 u16 max_packet_sz_rx; 276 277 struct dma_channel *tx_channel; 278 struct dma_channel *rx_channel; 279 280 #if defined(CONFIG_USB_MUSB_TUSB6010) || \ 281 defined(CONFIG_USB_MUSB_TUSB6010_MODULE) 282 /* TUSB has "asynchronous" and "synchronous" dma modes */ 283 dma_addr_t fifo_async; 284 dma_addr_t fifo_sync; 285 void __iomem *fifo_sync_va; 286 #endif 287 288 void __iomem *target_regs; 289 290 /* currently scheduled peripheral endpoint */ 291 struct musb_qh *in_qh; 292 struct musb_qh *out_qh; 293 294 u8 rx_reinit; 295 u8 tx_reinit; 296 297 /* peripheral side */ 298 struct musb_ep ep_in; /* TX */ 299 struct musb_ep ep_out; /* RX */ 300 }; 301 302 static inline struct musb_request *next_in_request(struct musb_hw_ep *hw_ep) 303 { 304 return next_request(&hw_ep->ep_in); 305 } 306 307 static inline struct musb_request *next_out_request(struct musb_hw_ep *hw_ep) 308 { 309 return next_request(&hw_ep->ep_out); 310 } 311 312 struct musb_csr_regs { 313 /* FIFO registers */ 314 u16 txmaxp, txcsr, rxmaxp, rxcsr; 315 u16 rxfifoadd, txfifoadd; 316 u8 txtype, txinterval, rxtype, rxinterval; 317 u8 rxfifosz, txfifosz; 318 u8 txfunaddr, txhubaddr, txhubport; 319 u8 rxfunaddr, rxhubaddr, rxhubport; 320 }; 321 322 struct musb_context_registers { 323 324 u8 power; 325 u16 intrtxe, intrrxe; 326 u8 intrusbe; 327 u16 frame; 328 u8 index, testmode; 329 330 u8 devctl, busctl, misc; 331 u32 otg_interfsel; 332 333 struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; 334 }; 335 336 /* 337 * struct musb - Driver instance data. 338 */ 339 struct musb { 340 /* device lock */ 341 spinlock_t lock; 342 343 const struct musb_platform_ops *ops; 344 struct musb_context_registers context; 345 346 irqreturn_t (*isr)(int, void *); 347 struct work_struct irq_work; 348 u16 hwvers; 349 350 /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */ 351 #define MUSB_PORT_STAT_RESUME (1 << 31) 352 353 u32 port1_status; 354 355 unsigned long rh_timer; 356 357 enum musb_h_ep0_state ep0_stage; 358 359 /* bulk traffic normally dedicates endpoint hardware, and each 360 * direction has its own ring of host side endpoints. 361 * we try to progress the transfer at the head of each endpoint's 362 * queue until it completes or NAKs too much; then we try the next 363 * endpoint. 364 */ 365 struct musb_hw_ep *bulk_ep; 366 367 struct list_head control; /* of musb_qh */ 368 struct list_head in_bulk; /* of musb_qh */ 369 struct list_head out_bulk; /* of musb_qh */ 370 371 struct timer_list otg_timer; 372 struct notifier_block nb; 373 374 struct dma_controller *dma_controller; 375 376 struct device *controller; 377 void __iomem *ctrl_base; 378 void __iomem *mregs; 379 380 #if defined(CONFIG_USB_MUSB_TUSB6010) || \ 381 defined(CONFIG_USB_MUSB_TUSB6010_MODULE) 382 dma_addr_t async; 383 dma_addr_t sync; 384 void __iomem *sync_va; 385 #endif 386 387 /* passed down from chip/board specific irq handlers */ 388 u8 int_usb; 389 u16 int_rx; 390 u16 int_tx; 391 392 struct usb_phy *xceiv; 393 394 int nIrq; 395 unsigned irq_wake:1; 396 397 struct musb_hw_ep endpoints[MUSB_C_NUM_EPS]; 398 #define control_ep endpoints 399 400 #define VBUSERR_RETRY_COUNT 3 401 u16 vbuserr_retry; 402 u16 epmask; 403 u8 nr_endpoints; 404 405 u8 board_mode; /* enum musb_mode */ 406 int (*board_set_power)(int state); 407 408 u8 min_power; /* vbus for periph, in mA/2 */ 409 410 bool is_host; 411 412 int a_wait_bcon; /* VBUS timeout in msecs */ 413 unsigned long idle_timeout; /* Next timeout in jiffies */ 414 415 /* active means connected and not suspended */ 416 unsigned is_active:1; 417 418 unsigned is_multipoint:1; 419 unsigned ignore_disconnect:1; /* during bus resets */ 420 421 unsigned hb_iso_rx:1; /* high bandwidth iso rx? */ 422 unsigned hb_iso_tx:1; /* high bandwidth iso tx? */ 423 unsigned dyn_fifo:1; /* dynamic FIFO supported? */ 424 425 unsigned bulk_split:1; 426 #define can_bulk_split(musb,type) \ 427 (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) 428 429 unsigned bulk_combine:1; 430 #define can_bulk_combine(musb,type) \ 431 (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) 432 433 /* is_suspended means USB B_PERIPHERAL suspend */ 434 unsigned is_suspended:1; 435 436 /* may_wakeup means remote wakeup is enabled */ 437 unsigned may_wakeup:1; 438 439 /* is_self_powered is reported in device status and the 440 * config descriptor. is_bus_powered means B_PERIPHERAL 441 * draws some VBUS current; both can be true. 442 */ 443 unsigned is_self_powered:1; 444 unsigned is_bus_powered:1; 445 446 unsigned set_address:1; 447 unsigned test_mode:1; 448 unsigned softconnect:1; 449 450 u8 address; 451 u8 test_mode_nr; 452 u16 ackpend; /* ep0 */ 453 enum musb_g_ep0_state ep0_state; 454 struct usb_gadget g; /* the gadget */ 455 struct usb_gadget_driver *gadget_driver; /* its driver */ 456 457 /* 458 * FIXME: Remove this flag. 459 * 460 * This is only added to allow Blackfin to work 461 * with current driver. For some unknown reason 462 * Blackfin doesn't work with double buffering 463 * and that's enabled by default. 464 * 465 * We added this flag to forcefully disable double 466 * buffering until we get it working. 467 */ 468 unsigned double_buffer_not_ok:1; 469 470 struct musb_hdrc_config *config; 471 472 #ifdef MUSB_CONFIG_PROC_FS 473 struct proc_dir_entry *proc_entry; 474 #endif 475 }; 476 477 static inline struct musb *gadget_to_musb(struct usb_gadget *g) 478 { 479 return container_of(g, struct musb, g); 480 } 481 482 #ifdef CONFIG_BLACKFIN 483 static inline int musb_read_fifosize(struct musb *musb, 484 struct musb_hw_ep *hw_ep, u8 epnum) 485 { 486 musb->nr_endpoints++; 487 musb->epmask |= (1 << epnum); 488 489 if (epnum < 5) { 490 hw_ep->max_packet_sz_tx = 128; 491 hw_ep->max_packet_sz_rx = 128; 492 } else { 493 hw_ep->max_packet_sz_tx = 1024; 494 hw_ep->max_packet_sz_rx = 1024; 495 } 496 hw_ep->is_shared_fifo = false; 497 498 return 0; 499 } 500 501 static inline void musb_configure_ep0(struct musb *musb) 502 { 503 musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE; 504 musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE; 505 musb->endpoints[0].is_shared_fifo = true; 506 } 507 508 #else 509 510 static inline int musb_read_fifosize(struct musb *musb, 511 struct musb_hw_ep *hw_ep, u8 epnum) 512 { 513 void *mbase = musb->mregs; 514 u8 reg = 0; 515 516 /* read from core using indexed model */ 517 reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE)); 518 /* 0's returned when no more endpoints */ 519 if (!reg) 520 return -ENODEV; 521 522 musb->nr_endpoints++; 523 musb->epmask |= (1 << epnum); 524 525 hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f); 526 527 /* shared TX/RX FIFO? */ 528 if ((reg & 0xf0) == 0xf0) { 529 hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx; 530 hw_ep->is_shared_fifo = true; 531 return 0; 532 } else { 533 hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4); 534 hw_ep->is_shared_fifo = false; 535 } 536 537 return 0; 538 } 539 540 static inline void musb_configure_ep0(struct musb *musb) 541 { 542 musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE; 543 musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE; 544 musb->endpoints[0].is_shared_fifo = true; 545 } 546 #endif /* CONFIG_BLACKFIN */ 547 548 549 /***************************** Glue it together *****************************/ 550 551 extern const char musb_driver_name[]; 552 553 #ifndef __UBOOT__ 554 extern void musb_start(struct musb *musb); 555 #else 556 extern int musb_start(struct musb *musb); 557 #endif 558 extern void musb_stop(struct musb *musb); 559 560 extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); 561 extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); 562 563 extern void musb_load_testpacket(struct musb *); 564 565 extern irqreturn_t musb_interrupt(struct musb *); 566 567 extern void musb_hnp_stop(struct musb *musb); 568 569 static inline void musb_platform_set_vbus(struct musb *musb, int is_on) 570 { 571 if (musb->ops->set_vbus) 572 musb->ops->set_vbus(musb, is_on); 573 } 574 575 #ifndef __UBOOT__ 576 static inline void musb_platform_enable(struct musb *musb) 577 { 578 if (musb->ops->enable) 579 musb->ops->enable(musb); 580 } 581 #else 582 static inline int musb_platform_enable(struct musb *musb) 583 { 584 if (!musb->ops->enable) 585 return 0; 586 587 return musb->ops->enable(musb); 588 } 589 #endif 590 591 static inline void musb_platform_disable(struct musb *musb) 592 { 593 if (musb->ops->disable) 594 musb->ops->disable(musb); 595 } 596 597 static inline int musb_platform_set_mode(struct musb *musb, u8 mode) 598 { 599 if (!musb->ops->set_mode) 600 return 0; 601 602 return musb->ops->set_mode(musb, mode); 603 } 604 605 static inline void musb_platform_try_idle(struct musb *musb, 606 unsigned long timeout) 607 { 608 if (musb->ops->try_idle) 609 musb->ops->try_idle(musb, timeout); 610 } 611 612 static inline int musb_platform_get_vbus_status(struct musb *musb) 613 { 614 if (!musb->ops->vbus_status) 615 return 0; 616 617 return musb->ops->vbus_status(musb); 618 } 619 620 static inline int musb_platform_init(struct musb *musb) 621 { 622 if (!musb->ops->init) 623 return -EINVAL; 624 625 return musb->ops->init(musb); 626 } 627 628 static inline int musb_platform_exit(struct musb *musb) 629 { 630 if (!musb->ops->exit) 631 return -EINVAL; 632 633 return musb->ops->exit(musb); 634 } 635 636 #ifdef __UBOOT__ 637 struct musb * 638 musb_init_controller(struct musb_hdrc_platform_data *plat, struct device *dev, 639 void *ctrl); 640 #endif 641 #endif /* __MUSB_CORE_H__ */ 642