1 /*
2  * MUSB OTG driver core code
3  *
4  * Copyright 2005 Mentor Graphics Corporation
5  * Copyright (C) 2005-2006 by Texas Instruments
6  * Copyright (C) 2006-2007 Nokia Corporation
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20  * 02110-1301 USA
21  *
22  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
25  * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  *
33  */
34 
35 /*
36  * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
37  *
38  * This consists of a Host Controller Driver (HCD) and a peripheral
39  * controller driver implementing the "Gadget" API; OTG support is
40  * in the works.  These are normal Linux-USB controller drivers which
41  * use IRQs and have no dedicated thread.
42  *
43  * This version of the driver has only been used with products from
44  * Texas Instruments.  Those products integrate the Inventra logic
45  * with other DMA, IRQ, and bus modules, as well as other logic that
46  * needs to be reflected in this driver.
47  *
48  *
49  * NOTE:  the original Mentor code here was pretty much a collection
50  * of mechanisms that don't seem to have been fully integrated/working
51  * for *any* Linux kernel version.  This version aims at Linux 2.6.now,
52  * Key open issues include:
53  *
54  *  - Lack of host-side transaction scheduling, for all transfer types.
55  *    The hardware doesn't do it; instead, software must.
56  *
57  *    This is not an issue for OTG devices that don't support external
58  *    hubs, but for more "normal" USB hosts it's a user issue that the
59  *    "multipoint" support doesn't scale in the expected ways.  That
60  *    includes DaVinci EVM in a common non-OTG mode.
61  *
62  *      * Control and bulk use dedicated endpoints, and there's as
63  *        yet no mechanism to either (a) reclaim the hardware when
64  *        peripherals are NAKing, which gets complicated with bulk
65  *        endpoints, or (b) use more than a single bulk endpoint in
66  *        each direction.
67  *
68  *        RESULT:  one device may be perceived as blocking another one.
69  *
70  *      * Interrupt and isochronous will dynamically allocate endpoint
71  *        hardware, but (a) there's no record keeping for bandwidth;
72  *        (b) in the common case that few endpoints are available, there
73  *        is no mechanism to reuse endpoints to talk to multiple devices.
74  *
75  *        RESULT:  At one extreme, bandwidth can be overcommitted in
76  *        some hardware configurations, no faults will be reported.
77  *        At the other extreme, the bandwidth capabilities which do
78  *        exist tend to be severely undercommitted.  You can't yet hook
79  *        up both a keyboard and a mouse to an external USB hub.
80  */
81 
82 /*
83  * This gets many kinds of configuration information:
84  *	- Kconfig for everything user-configurable
85  *	- platform_device for addressing, irq, and platform_data
86  *	- platform_data is mostly for board-specific informarion
87  *	  (plus recentrly, SOC or family details)
88  *
89  * Most of the conditional compilation will (someday) vanish.
90  */
91 
92 #ifndef __UBOOT__
93 #include <linux/module.h>
94 #include <linux/kernel.h>
95 #include <linux/sched.h>
96 #include <linux/slab.h>
97 #include <linux/init.h>
98 #include <linux/list.h>
99 #include <linux/kobject.h>
100 #include <linux/prefetch.h>
101 #include <linux/platform_device.h>
102 #include <linux/io.h>
103 #else
104 #include <common.h>
105 #include <usb.h>
106 #include <asm/errno.h>
107 #include <linux/usb/ch9.h>
108 #include <linux/usb/gadget.h>
109 #include <linux/usb/musb.h>
110 #include <asm/io.h>
111 #include "linux-compat.h"
112 #include "usb-compat.h"
113 #endif
114 
115 #include "musb_core.h"
116 
117 #define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
118 
119 
120 #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
121 #define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
122 
123 #define MUSB_VERSION "6.0"
124 
125 #define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
126 
127 #define MUSB_DRIVER_NAME "musb-hdrc"
128 const char musb_driver_name[] = MUSB_DRIVER_NAME;
129 
130 MODULE_DESCRIPTION(DRIVER_INFO);
131 MODULE_AUTHOR(DRIVER_AUTHOR);
132 MODULE_LICENSE("GPL");
133 MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
134 
135 
136 #ifndef __UBOOT__
137 /*-------------------------------------------------------------------------*/
138 
139 static inline struct musb *dev_to_musb(struct device *dev)
140 {
141 	return dev_get_drvdata(dev);
142 }
143 #endif
144 
145 /*-------------------------------------------------------------------------*/
146 
147 #ifndef __UBOOT__
148 #ifndef CONFIG_BLACKFIN
149 static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
150 {
151 	void __iomem *addr = phy->io_priv;
152 	int	i = 0;
153 	u8	r;
154 	u8	power;
155 	int	ret;
156 
157 	pm_runtime_get_sync(phy->io_dev);
158 
159 	/* Make sure the transceiver is not in low power mode */
160 	power = musb_readb(addr, MUSB_POWER);
161 	power &= ~MUSB_POWER_SUSPENDM;
162 	musb_writeb(addr, MUSB_POWER, power);
163 
164 	/* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the
165 	 * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
166 	 */
167 
168 	musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
169 	musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
170 			MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
171 
172 	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
173 				& MUSB_ULPI_REG_CMPLT)) {
174 		i++;
175 		if (i == 10000) {
176 			ret = -ETIMEDOUT;
177 			goto out;
178 		}
179 
180 	}
181 	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
182 	r &= ~MUSB_ULPI_REG_CMPLT;
183 	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
184 
185 	ret = musb_readb(addr, MUSB_ULPI_REG_DATA);
186 
187 out:
188 	pm_runtime_put(phy->io_dev);
189 
190 	return ret;
191 }
192 
193 static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
194 {
195 	void __iomem *addr = phy->io_priv;
196 	int	i = 0;
197 	u8	r = 0;
198 	u8	power;
199 	int	ret = 0;
200 
201 	pm_runtime_get_sync(phy->io_dev);
202 
203 	/* Make sure the transceiver is not in low power mode */
204 	power = musb_readb(addr, MUSB_POWER);
205 	power &= ~MUSB_POWER_SUSPENDM;
206 	musb_writeb(addr, MUSB_POWER, power);
207 
208 	musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
209 	musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data);
210 	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
211 
212 	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
213 				& MUSB_ULPI_REG_CMPLT)) {
214 		i++;
215 		if (i == 10000) {
216 			ret = -ETIMEDOUT;
217 			goto out;
218 		}
219 	}
220 
221 	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
222 	r &= ~MUSB_ULPI_REG_CMPLT;
223 	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
224 
225 out:
226 	pm_runtime_put(phy->io_dev);
227 
228 	return ret;
229 }
230 #else
231 #define musb_ulpi_read		NULL
232 #define musb_ulpi_write		NULL
233 #endif
234 
235 static struct usb_phy_io_ops musb_ulpi_access = {
236 	.read = musb_ulpi_read,
237 	.write = musb_ulpi_write,
238 };
239 #endif
240 
241 /*-------------------------------------------------------------------------*/
242 
243 #if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
244 
245 /*
246  * Load an endpoint's FIFO
247  */
248 void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
249 {
250 	struct musb *musb = hw_ep->musb;
251 	void __iomem *fifo = hw_ep->fifo;
252 
253 	prefetch((u8 *)src);
254 
255 	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
256 			'T', hw_ep->epnum, fifo, len, src);
257 
258 	/* we can't assume unaligned reads work */
259 	if (likely((0x01 & (unsigned long) src) == 0)) {
260 		u16	index = 0;
261 
262 		/* best case is 32bit-aligned source address */
263 		if ((0x02 & (unsigned long) src) == 0) {
264 			if (len >= 4) {
265 				writesl(fifo, src + index, len >> 2);
266 				index += len & ~0x03;
267 			}
268 			if (len & 0x02) {
269 				musb_writew(fifo, 0, *(u16 *)&src[index]);
270 				index += 2;
271 			}
272 		} else {
273 			if (len >= 2) {
274 				writesw(fifo, src + index, len >> 1);
275 				index += len & ~0x01;
276 			}
277 		}
278 		if (len & 0x01)
279 			musb_writeb(fifo, 0, src[index]);
280 	} else  {
281 		/* byte aligned */
282 		writesb(fifo, src, len);
283 	}
284 }
285 
286 #if !defined(CONFIG_USB_MUSB_AM35X)
287 /*
288  * Unload an endpoint's FIFO
289  */
290 void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
291 {
292 	struct musb *musb = hw_ep->musb;
293 	void __iomem *fifo = hw_ep->fifo;
294 
295 	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
296 			'R', hw_ep->epnum, fifo, len, dst);
297 
298 	/* we can't assume unaligned writes work */
299 	if (likely((0x01 & (unsigned long) dst) == 0)) {
300 		u16	index = 0;
301 
302 		/* best case is 32bit-aligned destination address */
303 		if ((0x02 & (unsigned long) dst) == 0) {
304 			if (len >= 4) {
305 				readsl(fifo, dst, len >> 2);
306 				index = len & ~0x03;
307 			}
308 			if (len & 0x02) {
309 				*(u16 *)&dst[index] = musb_readw(fifo, 0);
310 				index += 2;
311 			}
312 		} else {
313 			if (len >= 2) {
314 				readsw(fifo, dst, len >> 1);
315 				index = len & ~0x01;
316 			}
317 		}
318 		if (len & 0x01)
319 			dst[index] = musb_readb(fifo, 0);
320 	} else  {
321 		/* byte aligned */
322 		readsb(fifo, dst, len);
323 	}
324 }
325 #endif
326 
327 #endif	/* normal PIO */
328 
329 
330 /*-------------------------------------------------------------------------*/
331 
332 /* for high speed test mode; see USB 2.0 spec 7.1.20 */
333 static const u8 musb_test_packet[53] = {
334 	/* implicit SYNC then DATA0 to start */
335 
336 	/* JKJKJKJK x9 */
337 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
338 	/* JJKKJJKK x8 */
339 	0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
340 	/* JJJJKKKK x8 */
341 	0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
342 	/* JJJJJJJKKKKKKK x8 */
343 	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
344 	/* JJJJJJJK x8 */
345 	0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
346 	/* JKKKKKKK x10, JK */
347 	0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
348 
349 	/* implicit CRC16 then EOP to end */
350 };
351 
352 void musb_load_testpacket(struct musb *musb)
353 {
354 	void __iomem	*regs = musb->endpoints[0].regs;
355 
356 	musb_ep_select(musb->mregs, 0);
357 	musb_write_fifo(musb->control_ep,
358 			sizeof(musb_test_packet), musb_test_packet);
359 	musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
360 }
361 
362 #ifndef __UBOOT__
363 /*-------------------------------------------------------------------------*/
364 
365 /*
366  * Handles OTG hnp timeouts, such as b_ase0_brst
367  */
368 void musb_otg_timer_func(unsigned long data)
369 {
370 	struct musb	*musb = (struct musb *)data;
371 	unsigned long	flags;
372 
373 	spin_lock_irqsave(&musb->lock, flags);
374 	switch (musb->xceiv->state) {
375 	case OTG_STATE_B_WAIT_ACON:
376 		dev_dbg(musb->controller, "HNP: b_wait_acon timeout; back to b_peripheral\n");
377 		musb_g_disconnect(musb);
378 		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
379 		musb->is_active = 0;
380 		break;
381 	case OTG_STATE_A_SUSPEND:
382 	case OTG_STATE_A_WAIT_BCON:
383 		dev_dbg(musb->controller, "HNP: %s timeout\n",
384 			otg_state_string(musb->xceiv->state));
385 		musb_platform_set_vbus(musb, 0);
386 		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
387 		break;
388 	default:
389 		dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
390 			otg_state_string(musb->xceiv->state));
391 	}
392 	musb->ignore_disconnect = 0;
393 	spin_unlock_irqrestore(&musb->lock, flags);
394 }
395 
396 /*
397  * Stops the HNP transition. Caller must take care of locking.
398  */
399 void musb_hnp_stop(struct musb *musb)
400 {
401 	struct usb_hcd	*hcd = musb_to_hcd(musb);
402 	void __iomem	*mbase = musb->mregs;
403 	u8	reg;
404 
405 	dev_dbg(musb->controller, "HNP: stop from %s\n", otg_state_string(musb->xceiv->state));
406 
407 	switch (musb->xceiv->state) {
408 	case OTG_STATE_A_PERIPHERAL:
409 		musb_g_disconnect(musb);
410 		dev_dbg(musb->controller, "HNP: back to %s\n",
411 			otg_state_string(musb->xceiv->state));
412 		break;
413 	case OTG_STATE_B_HOST:
414 		dev_dbg(musb->controller, "HNP: Disabling HR\n");
415 		hcd->self.is_b_host = 0;
416 		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
417 		MUSB_DEV_MODE(musb);
418 		reg = musb_readb(mbase, MUSB_POWER);
419 		reg |= MUSB_POWER_SUSPENDM;
420 		musb_writeb(mbase, MUSB_POWER, reg);
421 		/* REVISIT: Start SESSION_REQUEST here? */
422 		break;
423 	default:
424 		dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n",
425 			otg_state_string(musb->xceiv->state));
426 	}
427 
428 	/*
429 	 * When returning to A state after HNP, avoid hub_port_rebounce(),
430 	 * which cause occasional OPT A "Did not receive reset after connect"
431 	 * errors.
432 	 */
433 	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
434 }
435 #endif
436 
437 /*
438  * Interrupt Service Routine to record USB "global" interrupts.
439  * Since these do not happen often and signify things of
440  * paramount importance, it seems OK to check them individually;
441  * the order of the tests is specified in the manual
442  *
443  * @param musb instance pointer
444  * @param int_usb register contents
445  * @param devctl
446  * @param power
447  */
448 
449 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
450 				u8 devctl, u8 power)
451 {
452 #ifndef __UBOOT__
453 	struct usb_otg *otg = musb->xceiv->otg;
454 #endif
455 	irqreturn_t handled = IRQ_NONE;
456 
457 	dev_dbg(musb->controller, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
458 		int_usb);
459 
460 #ifndef __UBOOT__
461 	/* in host mode, the peripheral may issue remote wakeup.
462 	 * in peripheral mode, the host may resume the link.
463 	 * spurious RESUME irqs happen too, paired with SUSPEND.
464 	 */
465 	if (int_usb & MUSB_INTR_RESUME) {
466 		handled = IRQ_HANDLED;
467 		dev_dbg(musb->controller, "RESUME (%s)\n", otg_state_string(musb->xceiv->state));
468 
469 		if (devctl & MUSB_DEVCTL_HM) {
470 			void __iomem *mbase = musb->mregs;
471 
472 			switch (musb->xceiv->state) {
473 			case OTG_STATE_A_SUSPEND:
474 				/* remote wakeup?  later, GetPortStatus
475 				 * will stop RESUME signaling
476 				 */
477 
478 				if (power & MUSB_POWER_SUSPENDM) {
479 					/* spurious */
480 					musb->int_usb &= ~MUSB_INTR_SUSPEND;
481 					dev_dbg(musb->controller, "Spurious SUSPENDM\n");
482 					break;
483 				}
484 
485 				power &= ~MUSB_POWER_SUSPENDM;
486 				musb_writeb(mbase, MUSB_POWER,
487 						power | MUSB_POWER_RESUME);
488 
489 				musb->port1_status |=
490 						(USB_PORT_STAT_C_SUSPEND << 16)
491 						| MUSB_PORT_STAT_RESUME;
492 				musb->rh_timer = jiffies
493 						+ msecs_to_jiffies(20);
494 
495 				musb->xceiv->state = OTG_STATE_A_HOST;
496 				musb->is_active = 1;
497 				usb_hcd_resume_root_hub(musb_to_hcd(musb));
498 				break;
499 			case OTG_STATE_B_WAIT_ACON:
500 				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
501 				musb->is_active = 1;
502 				MUSB_DEV_MODE(musb);
503 				break;
504 			default:
505 				WARNING("bogus %s RESUME (%s)\n",
506 					"host",
507 					otg_state_string(musb->xceiv->state));
508 			}
509 		} else {
510 			switch (musb->xceiv->state) {
511 			case OTG_STATE_A_SUSPEND:
512 				/* possibly DISCONNECT is upcoming */
513 				musb->xceiv->state = OTG_STATE_A_HOST;
514 				usb_hcd_resume_root_hub(musb_to_hcd(musb));
515 				break;
516 			case OTG_STATE_B_WAIT_ACON:
517 			case OTG_STATE_B_PERIPHERAL:
518 				/* disconnect while suspended?  we may
519 				 * not get a disconnect irq...
520 				 */
521 				if ((devctl & MUSB_DEVCTL_VBUS)
522 						!= (3 << MUSB_DEVCTL_VBUS_SHIFT)
523 						) {
524 					musb->int_usb |= MUSB_INTR_DISCONNECT;
525 					musb->int_usb &= ~MUSB_INTR_SUSPEND;
526 					break;
527 				}
528 				musb_g_resume(musb);
529 				break;
530 			case OTG_STATE_B_IDLE:
531 				musb->int_usb &= ~MUSB_INTR_SUSPEND;
532 				break;
533 			default:
534 				WARNING("bogus %s RESUME (%s)\n",
535 					"peripheral",
536 					otg_state_string(musb->xceiv->state));
537 			}
538 		}
539 	}
540 
541 	/* see manual for the order of the tests */
542 	if (int_usb & MUSB_INTR_SESSREQ) {
543 		void __iomem *mbase = musb->mregs;
544 
545 		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
546 				&& (devctl & MUSB_DEVCTL_BDEVICE)) {
547 			dev_dbg(musb->controller, "SessReq while on B state\n");
548 			return IRQ_HANDLED;
549 		}
550 
551 		dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n",
552 			otg_state_string(musb->xceiv->state));
553 
554 		/* IRQ arrives from ID pin sense or (later, if VBUS power
555 		 * is removed) SRP.  responses are time critical:
556 		 *  - turn on VBUS (with silicon-specific mechanism)
557 		 *  - go through A_WAIT_VRISE
558 		 *  - ... to A_WAIT_BCON.
559 		 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
560 		 */
561 		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
562 		musb->ep0_stage = MUSB_EP0_START;
563 		musb->xceiv->state = OTG_STATE_A_IDLE;
564 		MUSB_HST_MODE(musb);
565 		musb_platform_set_vbus(musb, 1);
566 
567 		handled = IRQ_HANDLED;
568 	}
569 
570 	if (int_usb & MUSB_INTR_VBUSERROR) {
571 		int	ignore = 0;
572 
573 		/* During connection as an A-Device, we may see a short
574 		 * current spikes causing voltage drop, because of cable
575 		 * and peripheral capacitance combined with vbus draw.
576 		 * (So: less common with truly self-powered devices, where
577 		 * vbus doesn't act like a power supply.)
578 		 *
579 		 * Such spikes are short; usually less than ~500 usec, max
580 		 * of ~2 msec.  That is, they're not sustained overcurrent
581 		 * errors, though they're reported using VBUSERROR irqs.
582 		 *
583 		 * Workarounds:  (a) hardware: use self powered devices.
584 		 * (b) software:  ignore non-repeated VBUS errors.
585 		 *
586 		 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
587 		 * make trouble here, keeping VBUS < 4.4V ?
588 		 */
589 		switch (musb->xceiv->state) {
590 		case OTG_STATE_A_HOST:
591 			/* recovery is dicey once we've gotten past the
592 			 * initial stages of enumeration, but if VBUS
593 			 * stayed ok at the other end of the link, and
594 			 * another reset is due (at least for high speed,
595 			 * to redo the chirp etc), it might work OK...
596 			 */
597 		case OTG_STATE_A_WAIT_BCON:
598 		case OTG_STATE_A_WAIT_VRISE:
599 			if (musb->vbuserr_retry) {
600 				void __iomem *mbase = musb->mregs;
601 
602 				musb->vbuserr_retry--;
603 				ignore = 1;
604 				devctl |= MUSB_DEVCTL_SESSION;
605 				musb_writeb(mbase, MUSB_DEVCTL, devctl);
606 			} else {
607 				musb->port1_status |=
608 					  USB_PORT_STAT_OVERCURRENT
609 					| (USB_PORT_STAT_C_OVERCURRENT << 16);
610 			}
611 			break;
612 		default:
613 			break;
614 		}
615 
616 		dev_dbg(musb->controller, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
617 				otg_state_string(musb->xceiv->state),
618 				devctl,
619 				({ char *s;
620 				switch (devctl & MUSB_DEVCTL_VBUS) {
621 				case 0 << MUSB_DEVCTL_VBUS_SHIFT:
622 					s = "<SessEnd"; break;
623 				case 1 << MUSB_DEVCTL_VBUS_SHIFT:
624 					s = "<AValid"; break;
625 				case 2 << MUSB_DEVCTL_VBUS_SHIFT:
626 					s = "<VBusValid"; break;
627 				/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
628 				default:
629 					s = "VALID"; break;
630 				}; s; }),
631 				VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
632 				musb->port1_status);
633 
634 		/* go through A_WAIT_VFALL then start a new session */
635 		if (!ignore)
636 			musb_platform_set_vbus(musb, 0);
637 		handled = IRQ_HANDLED;
638 	}
639 
640 	if (int_usb & MUSB_INTR_SUSPEND) {
641 		dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x power %02x\n",
642 			otg_state_string(musb->xceiv->state), devctl, power);
643 		handled = IRQ_HANDLED;
644 
645 		switch (musb->xceiv->state) {
646 		case OTG_STATE_A_PERIPHERAL:
647 			/* We also come here if the cable is removed, since
648 			 * this silicon doesn't report ID-no-longer-grounded.
649 			 *
650 			 * We depend on T(a_wait_bcon) to shut us down, and
651 			 * hope users don't do anything dicey during this
652 			 * undesired detour through A_WAIT_BCON.
653 			 */
654 			musb_hnp_stop(musb);
655 			usb_hcd_resume_root_hub(musb_to_hcd(musb));
656 			musb_root_disconnect(musb);
657 			musb_platform_try_idle(musb, jiffies
658 					+ msecs_to_jiffies(musb->a_wait_bcon
659 						? : OTG_TIME_A_WAIT_BCON));
660 
661 			break;
662 		case OTG_STATE_B_IDLE:
663 			if (!musb->is_active)
664 				break;
665 		case OTG_STATE_B_PERIPHERAL:
666 			musb_g_suspend(musb);
667 			musb->is_active = is_otg_enabled(musb)
668 					&& otg->gadget->b_hnp_enable;
669 			if (musb->is_active) {
670 				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
671 				dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
672 				mod_timer(&musb->otg_timer, jiffies
673 					+ msecs_to_jiffies(
674 							OTG_TIME_B_ASE0_BRST));
675 			}
676 			break;
677 		case OTG_STATE_A_WAIT_BCON:
678 			if (musb->a_wait_bcon != 0)
679 				musb_platform_try_idle(musb, jiffies
680 					+ msecs_to_jiffies(musb->a_wait_bcon));
681 			break;
682 		case OTG_STATE_A_HOST:
683 			musb->xceiv->state = OTG_STATE_A_SUSPEND;
684 			musb->is_active = is_otg_enabled(musb)
685 					&& otg->host->b_hnp_enable;
686 			break;
687 		case OTG_STATE_B_HOST:
688 			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
689 			dev_dbg(musb->controller, "REVISIT: SUSPEND as B_HOST\n");
690 			break;
691 		default:
692 			/* "should not happen" */
693 			musb->is_active = 0;
694 			break;
695 		}
696 	}
697 #endif
698 
699 	if (int_usb & MUSB_INTR_CONNECT) {
700 		struct usb_hcd *hcd = musb_to_hcd(musb);
701 
702 		handled = IRQ_HANDLED;
703 		musb->is_active = 1;
704 
705 		musb->ep0_stage = MUSB_EP0_START;
706 
707 		/* flush endpoints when transitioning from Device Mode */
708 		if (is_peripheral_active(musb)) {
709 			/* REVISIT HNP; just force disconnect */
710 		}
711 		musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask);
712 		musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe);
713 		musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
714 #ifndef __UBOOT__
715 		musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
716 					|USB_PORT_STAT_HIGH_SPEED
717 					|USB_PORT_STAT_ENABLE
718 					);
719 		musb->port1_status |= USB_PORT_STAT_CONNECTION
720 					|(USB_PORT_STAT_C_CONNECTION << 16);
721 
722 		/* high vs full speed is just a guess until after reset */
723 		if (devctl & MUSB_DEVCTL_LSDEV)
724 			musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
725 
726 		/* indicate new connection to OTG machine */
727 		switch (musb->xceiv->state) {
728 		case OTG_STATE_B_PERIPHERAL:
729 			if (int_usb & MUSB_INTR_SUSPEND) {
730 				dev_dbg(musb->controller, "HNP: SUSPEND+CONNECT, now b_host\n");
731 				int_usb &= ~MUSB_INTR_SUSPEND;
732 				goto b_host;
733 			} else
734 				dev_dbg(musb->controller, "CONNECT as b_peripheral???\n");
735 			break;
736 		case OTG_STATE_B_WAIT_ACON:
737 			dev_dbg(musb->controller, "HNP: CONNECT, now b_host\n");
738 b_host:
739 			musb->xceiv->state = OTG_STATE_B_HOST;
740 			hcd->self.is_b_host = 1;
741 			musb->ignore_disconnect = 0;
742 			del_timer(&musb->otg_timer);
743 			break;
744 		default:
745 			if ((devctl & MUSB_DEVCTL_VBUS)
746 					== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
747 				musb->xceiv->state = OTG_STATE_A_HOST;
748 				hcd->self.is_b_host = 0;
749 			}
750 			break;
751 		}
752 
753 		/* poke the root hub */
754 		MUSB_HST_MODE(musb);
755 		if (hcd->status_urb)
756 			usb_hcd_poll_rh_status(hcd);
757 		else
758 			usb_hcd_resume_root_hub(hcd);
759 
760 		dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
761 				otg_state_string(musb->xceiv->state), devctl);
762 #endif
763 	}
764 
765 #ifndef __UBOOT__
766 	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
767 		dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
768 				otg_state_string(musb->xceiv->state),
769 				MUSB_MODE(musb), devctl);
770 		handled = IRQ_HANDLED;
771 
772 		switch (musb->xceiv->state) {
773 		case OTG_STATE_A_HOST:
774 		case OTG_STATE_A_SUSPEND:
775 			usb_hcd_resume_root_hub(musb_to_hcd(musb));
776 			musb_root_disconnect(musb);
777 			if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
778 				musb_platform_try_idle(musb, jiffies
779 					+ msecs_to_jiffies(musb->a_wait_bcon));
780 			break;
781 		case OTG_STATE_B_HOST:
782 			/* REVISIT this behaves for "real disconnect"
783 			 * cases; make sure the other transitions from
784 			 * from B_HOST act right too.  The B_HOST code
785 			 * in hnp_stop() is currently not used...
786 			 */
787 			musb_root_disconnect(musb);
788 			musb_to_hcd(musb)->self.is_b_host = 0;
789 			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
790 			MUSB_DEV_MODE(musb);
791 			musb_g_disconnect(musb);
792 			break;
793 		case OTG_STATE_A_PERIPHERAL:
794 			musb_hnp_stop(musb);
795 			musb_root_disconnect(musb);
796 			/* FALLTHROUGH */
797 		case OTG_STATE_B_WAIT_ACON:
798 			/* FALLTHROUGH */
799 		case OTG_STATE_B_PERIPHERAL:
800 		case OTG_STATE_B_IDLE:
801 			musb_g_disconnect(musb);
802 			break;
803 		default:
804 			WARNING("unhandled DISCONNECT transition (%s)\n",
805 				otg_state_string(musb->xceiv->state));
806 			break;
807 		}
808 	}
809 
810 	/* mentor saves a bit: bus reset and babble share the same irq.
811 	 * only host sees babble; only peripheral sees bus reset.
812 	 */
813 	if (int_usb & MUSB_INTR_RESET) {
814 		handled = IRQ_HANDLED;
815 		if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
816 			/*
817 			 * Looks like non-HS BABBLE can be ignored, but
818 			 * HS BABBLE is an error condition. For HS the solution
819 			 * is to avoid babble in the first place and fix what
820 			 * caused BABBLE. When HS BABBLE happens we can only
821 			 * stop the session.
822 			 */
823 			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
824 				dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl);
825 			else {
826 				ERR("Stopping host session -- babble\n");
827 				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
828 			}
829 		} else if (is_peripheral_capable()) {
830 			dev_dbg(musb->controller, "BUS RESET as %s\n",
831 				otg_state_string(musb->xceiv->state));
832 			switch (musb->xceiv->state) {
833 			case OTG_STATE_A_SUSPEND:
834 				/* We need to ignore disconnect on suspend
835 				 * otherwise tusb 2.0 won't reconnect after a
836 				 * power cycle, which breaks otg compliance.
837 				 */
838 				musb->ignore_disconnect = 1;
839 				musb_g_reset(musb);
840 				/* FALLTHROUGH */
841 			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
842 				/* never use invalid T(a_wait_bcon) */
843 				dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n",
844 					otg_state_string(musb->xceiv->state),
845 					TA_WAIT_BCON(musb));
846 				mod_timer(&musb->otg_timer, jiffies
847 					+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
848 				break;
849 			case OTG_STATE_A_PERIPHERAL:
850 				musb->ignore_disconnect = 0;
851 				del_timer(&musb->otg_timer);
852 				musb_g_reset(musb);
853 				break;
854 			case OTG_STATE_B_WAIT_ACON:
855 				dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n",
856 					otg_state_string(musb->xceiv->state));
857 				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
858 				musb_g_reset(musb);
859 				break;
860 			case OTG_STATE_B_IDLE:
861 				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
862 				/* FALLTHROUGH */
863 			case OTG_STATE_B_PERIPHERAL:
864 				musb_g_reset(musb);
865 				break;
866 			default:
867 				dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n",
868 					otg_state_string(musb->xceiv->state));
869 			}
870 		}
871 	}
872 #endif
873 
874 #if 0
875 /* REVISIT ... this would be for multiplexing periodic endpoints, or
876  * supporting transfer phasing to prevent exceeding ISO bandwidth
877  * limits of a given frame or microframe.
878  *
879  * It's not needed for peripheral side, which dedicates endpoints;
880  * though it _might_ use SOF irqs for other purposes.
881  *
882  * And it's not currently needed for host side, which also dedicates
883  * endpoints, relies on TX/RX interval registers, and isn't claimed
884  * to support ISO transfers yet.
885  */
886 	if (int_usb & MUSB_INTR_SOF) {
887 		void __iomem *mbase = musb->mregs;
888 		struct musb_hw_ep	*ep;
889 		u8 epnum;
890 		u16 frame;
891 
892 		dev_dbg(musb->controller, "START_OF_FRAME\n");
893 		handled = IRQ_HANDLED;
894 
895 		/* start any periodic Tx transfers waiting for current frame */
896 		frame = musb_readw(mbase, MUSB_FRAME);
897 		ep = musb->endpoints;
898 		for (epnum = 1; (epnum < musb->nr_endpoints)
899 					&& (musb->epmask >= (1 << epnum));
900 				epnum++, ep++) {
901 			/*
902 			 * FIXME handle framecounter wraps (12 bits)
903 			 * eliminate duplicated StartUrb logic
904 			 */
905 			if (ep->dwWaitFrame >= frame) {
906 				ep->dwWaitFrame = 0;
907 				pr_debug("SOF --> periodic TX%s on %d\n",
908 					ep->tx_channel ? " DMA" : "",
909 					epnum);
910 				if (!ep->tx_channel)
911 					musb_h_tx_start(musb, epnum);
912 				else
913 					cppi_hostdma_start(musb, epnum);
914 			}
915 		}		/* end of for loop */
916 	}
917 #endif
918 
919 	schedule_work(&musb->irq_work);
920 
921 	return handled;
922 }
923 
924 /*-------------------------------------------------------------------------*/
925 
926 /*
927 * Program the HDRC to start (enable interrupts, dma, etc.).
928 */
929 #ifndef __UBOOT__
930 void musb_start(struct musb *musb)
931 #else
932 int musb_start(struct musb *musb)
933 #endif
934 {
935 	void __iomem	*regs = musb->mregs;
936 	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
937 #ifdef __UBOOT__
938 	int ret;
939 #endif
940 
941 	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
942 
943 	/*  Set INT enable registers, enable interrupts */
944 	musb_writew(regs, MUSB_INTRTXE, musb->epmask);
945 	musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
946 	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
947 
948 	musb_writeb(regs, MUSB_TESTMODE, 0);
949 
950 	/* put into basic highspeed mode and start session */
951 	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
952 						| MUSB_POWER_HSENAB
953 						/* ENSUSPEND wedges tusb */
954 						/* | MUSB_POWER_ENSUSPEND */
955 						);
956 
957 	musb->is_active = 0;
958 	devctl = musb_readb(regs, MUSB_DEVCTL);
959 	devctl &= ~MUSB_DEVCTL_SESSION;
960 
961 	if (is_otg_enabled(musb)) {
962 #ifndef __UBOOT__
963 		/* session started after:
964 		 * (a) ID-grounded irq, host mode;
965 		 * (b) vbus present/connect IRQ, peripheral mode;
966 		 * (c) peripheral initiates, using SRP
967 		 */
968 		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
969 			musb->is_active = 1;
970 		else
971 			devctl |= MUSB_DEVCTL_SESSION;
972 #endif
973 
974 	} else if (is_host_enabled(musb)) {
975 		/* assume ID pin is hard-wired to ground */
976 		devctl |= MUSB_DEVCTL_SESSION;
977 
978 	} else /* peripheral is enabled */ {
979 		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
980 			musb->is_active = 1;
981 	}
982 
983 #ifndef __UBOOT__
984 	musb_platform_enable(musb);
985 #else
986 	ret = musb_platform_enable(musb);
987 	if (ret) {
988 		musb->is_active = 0;
989 		return ret;
990 	}
991 #endif
992 	musb_writeb(regs, MUSB_DEVCTL, devctl);
993 
994 #ifdef __UBOOT__
995 	return 0;
996 #endif
997 }
998 
999 
1000 static void musb_generic_disable(struct musb *musb)
1001 {
1002 	void __iomem	*mbase = musb->mregs;
1003 	u16	temp;
1004 
1005 	/* disable interrupts */
1006 	musb_writeb(mbase, MUSB_INTRUSBE, 0);
1007 	musb_writew(mbase, MUSB_INTRTXE, 0);
1008 	musb_writew(mbase, MUSB_INTRRXE, 0);
1009 
1010 	/* off */
1011 	musb_writeb(mbase, MUSB_DEVCTL, 0);
1012 
1013 	/*  flush pending interrupts */
1014 	temp = musb_readb(mbase, MUSB_INTRUSB);
1015 	temp = musb_readw(mbase, MUSB_INTRTX);
1016 	temp = musb_readw(mbase, MUSB_INTRRX);
1017 
1018 }
1019 
1020 /*
1021  * Make the HDRC stop (disable interrupts, etc.);
1022  * reversible by musb_start
1023  * called on gadget driver unregister
1024  * with controller locked, irqs blocked
1025  * acts as a NOP unless some role activated the hardware
1026  */
1027 void musb_stop(struct musb *musb)
1028 {
1029 	/* stop IRQs, timers, ... */
1030 	musb_platform_disable(musb);
1031 	musb_generic_disable(musb);
1032 	dev_dbg(musb->controller, "HDRC disabled\n");
1033 
1034 	/* FIXME
1035 	 *  - mark host and/or peripheral drivers unusable/inactive
1036 	 *  - disable DMA (and enable it in HdrcStart)
1037 	 *  - make sure we can musb_start() after musb_stop(); with
1038 	 *    OTG mode, gadget driver module rmmod/modprobe cycles that
1039 	 *  - ...
1040 	 */
1041 	musb_platform_try_idle(musb, 0);
1042 }
1043 
1044 #ifndef __UBOOT__
1045 static void musb_shutdown(struct platform_device *pdev)
1046 {
1047 	struct musb	*musb = dev_to_musb(&pdev->dev);
1048 	unsigned long	flags;
1049 
1050 	pm_runtime_get_sync(musb->controller);
1051 
1052 	musb_gadget_cleanup(musb);
1053 
1054 	spin_lock_irqsave(&musb->lock, flags);
1055 	musb_platform_disable(musb);
1056 	musb_generic_disable(musb);
1057 	spin_unlock_irqrestore(&musb->lock, flags);
1058 
1059 	if (!is_otg_enabled(musb) && is_host_enabled(musb))
1060 		usb_remove_hcd(musb_to_hcd(musb));
1061 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
1062 	musb_platform_exit(musb);
1063 
1064 	pm_runtime_put(musb->controller);
1065 	/* FIXME power down */
1066 }
1067 #endif
1068 
1069 
1070 /*-------------------------------------------------------------------------*/
1071 
1072 /*
1073  * The silicon either has hard-wired endpoint configurations, or else
1074  * "dynamic fifo" sizing.  The driver has support for both, though at this
1075  * writing only the dynamic sizing is very well tested.   Since we switched
1076  * away from compile-time hardware parameters, we can no longer rely on
1077  * dead code elimination to leave only the relevant one in the object file.
1078  *
1079  * We don't currently use dynamic fifo setup capability to do anything
1080  * more than selecting one of a bunch of predefined configurations.
1081  */
1082 #if defined(CONFIG_USB_MUSB_TUSB6010)			\
1083 	|| defined(CONFIG_USB_MUSB_TUSB6010_MODULE)	\
1084 	|| defined(CONFIG_USB_MUSB_OMAP2PLUS)		\
1085 	|| defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)	\
1086 	|| defined(CONFIG_USB_MUSB_AM35X)		\
1087 	|| defined(CONFIG_USB_MUSB_AM35X_MODULE)	\
1088 	|| defined(CONFIG_USB_MUSB_DSPS)		\
1089 	|| defined(CONFIG_USB_MUSB_DSPS_MODULE)
1090 static ushort __devinitdata fifo_mode = 4;
1091 #elif defined(CONFIG_USB_MUSB_UX500)			\
1092 	|| defined(CONFIG_USB_MUSB_UX500_MODULE)
1093 static ushort __devinitdata fifo_mode = 5;
1094 #else
1095 static ushort __devinitdata fifo_mode = 2;
1096 #endif
1097 
1098 /* "modprobe ... fifo_mode=1" etc */
1099 module_param(fifo_mode, ushort, 0);
1100 MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
1101 
1102 /*
1103  * tables defining fifo_mode values.  define more if you like.
1104  * for host side, make sure both halves of ep1 are set up.
1105  */
1106 
1107 /* mode 0 - fits in 2KB */
1108 static struct musb_fifo_cfg __devinitdata mode_0_cfg[] = {
1109 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
1110 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
1111 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
1112 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1113 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1114 };
1115 
1116 /* mode 1 - fits in 4KB */
1117 static struct musb_fifo_cfg __devinitdata mode_1_cfg[] = {
1118 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
1119 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
1120 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1121 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1122 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1123 };
1124 
1125 /* mode 2 - fits in 4KB */
1126 static struct musb_fifo_cfg __devinitdata mode_2_cfg[] = {
1127 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
1128 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
1129 { .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
1130 { .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
1131 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1132 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1133 };
1134 
1135 /* mode 3 - fits in 4KB */
1136 static struct musb_fifo_cfg __devinitdata mode_3_cfg[] = {
1137 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
1138 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
1139 { .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
1140 { .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
1141 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1142 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1143 };
1144 
1145 /* mode 4 - fits in 16KB */
1146 static struct musb_fifo_cfg __devinitdata mode_4_cfg[] = {
1147 { .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
1148 { .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
1149 { .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
1150 { .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
1151 { .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
1152 { .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
1153 { .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
1154 { .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
1155 { .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
1156 { .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
1157 { .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, },
1158 { .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 512, },
1159 { .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
1160 { .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
1161 { .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
1162 { .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
1163 { .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
1164 { .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
1165 { .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 256, },
1166 { .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 64, },
1167 { .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 256, },
1168 { .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 64, },
1169 { .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 256, },
1170 { .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 64, },
1171 { .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
1172 { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
1173 { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
1174 };
1175 
1176 /* mode 5 - fits in 8KB */
1177 static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = {
1178 { .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
1179 { .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
1180 { .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
1181 { .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
1182 { .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
1183 { .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
1184 { .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
1185 { .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
1186 { .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
1187 { .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
1188 { .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 32, },
1189 { .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 32, },
1190 { .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 32, },
1191 { .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 32, },
1192 { .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 32, },
1193 { .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 32, },
1194 { .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 32, },
1195 { .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 32, },
1196 { .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 32, },
1197 { .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 32, },
1198 { .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 32, },
1199 { .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 32, },
1200 { .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 32, },
1201 { .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 32, },
1202 { .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, },
1203 { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
1204 { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
1205 };
1206 
1207 /*
1208  * configure a fifo; for non-shared endpoints, this may be called
1209  * once for a tx fifo and once for an rx fifo.
1210  *
1211  * returns negative errno or offset for next fifo.
1212  */
1213 static int __devinit
1214 fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
1215 		const struct musb_fifo_cfg *cfg, u16 offset)
1216 {
1217 	void __iomem	*mbase = musb->mregs;
1218 	int	size = 0;
1219 	u16	maxpacket = cfg->maxpacket;
1220 	u16	c_off = offset >> 3;
1221 	u8	c_size;
1222 
1223 	/* expect hw_ep has already been zero-initialized */
1224 
1225 	size = ffs(max(maxpacket, (u16) 8)) - 1;
1226 	maxpacket = 1 << size;
1227 
1228 	c_size = size - 3;
1229 	if (cfg->mode == BUF_DOUBLE) {
1230 		if ((offset + (maxpacket << 1)) >
1231 				(1 << (musb->config->ram_bits + 2)))
1232 			return -EMSGSIZE;
1233 		c_size |= MUSB_FIFOSZ_DPB;
1234 	} else {
1235 		if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
1236 			return -EMSGSIZE;
1237 	}
1238 
1239 	/* configure the FIFO */
1240 	musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
1241 
1242 	/* EP0 reserved endpoint for control, bidirectional;
1243 	 * EP1 reserved for bulk, two unidirection halves.
1244 	 */
1245 	if (hw_ep->epnum == 1)
1246 		musb->bulk_ep = hw_ep;
1247 	/* REVISIT error check:  be sure ep0 can both rx and tx ... */
1248 	switch (cfg->style) {
1249 	case FIFO_TX:
1250 		musb_write_txfifosz(mbase, c_size);
1251 		musb_write_txfifoadd(mbase, c_off);
1252 		hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1253 		hw_ep->max_packet_sz_tx = maxpacket;
1254 		break;
1255 	case FIFO_RX:
1256 		musb_write_rxfifosz(mbase, c_size);
1257 		musb_write_rxfifoadd(mbase, c_off);
1258 		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1259 		hw_ep->max_packet_sz_rx = maxpacket;
1260 		break;
1261 	case FIFO_RXTX:
1262 		musb_write_txfifosz(mbase, c_size);
1263 		musb_write_txfifoadd(mbase, c_off);
1264 		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1265 		hw_ep->max_packet_sz_rx = maxpacket;
1266 
1267 		musb_write_rxfifosz(mbase, c_size);
1268 		musb_write_rxfifoadd(mbase, c_off);
1269 		hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
1270 		hw_ep->max_packet_sz_tx = maxpacket;
1271 
1272 		hw_ep->is_shared_fifo = true;
1273 		break;
1274 	}
1275 
1276 	/* NOTE rx and tx endpoint irqs aren't managed separately,
1277 	 * which happens to be ok
1278 	 */
1279 	musb->epmask |= (1 << hw_ep->epnum);
1280 
1281 	return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
1282 }
1283 
1284 static struct musb_fifo_cfg __devinitdata ep0_cfg = {
1285 	.style = FIFO_RXTX, .maxpacket = 64,
1286 };
1287 
1288 static int __devinit ep_config_from_table(struct musb *musb)
1289 {
1290 	const struct musb_fifo_cfg	*cfg;
1291 	unsigned		i, n;
1292 	int			offset;
1293 	struct musb_hw_ep	*hw_ep = musb->endpoints;
1294 
1295 	if (musb->config->fifo_cfg) {
1296 		cfg = musb->config->fifo_cfg;
1297 		n = musb->config->fifo_cfg_size;
1298 		goto done;
1299 	}
1300 
1301 	switch (fifo_mode) {
1302 	default:
1303 		fifo_mode = 0;
1304 		/* FALLTHROUGH */
1305 	case 0:
1306 		cfg = mode_0_cfg;
1307 		n = ARRAY_SIZE(mode_0_cfg);
1308 		break;
1309 	case 1:
1310 		cfg = mode_1_cfg;
1311 		n = ARRAY_SIZE(mode_1_cfg);
1312 		break;
1313 	case 2:
1314 		cfg = mode_2_cfg;
1315 		n = ARRAY_SIZE(mode_2_cfg);
1316 		break;
1317 	case 3:
1318 		cfg = mode_3_cfg;
1319 		n = ARRAY_SIZE(mode_3_cfg);
1320 		break;
1321 	case 4:
1322 		cfg = mode_4_cfg;
1323 		n = ARRAY_SIZE(mode_4_cfg);
1324 		break;
1325 	case 5:
1326 		cfg = mode_5_cfg;
1327 		n = ARRAY_SIZE(mode_5_cfg);
1328 		break;
1329 	}
1330 
1331 	pr_debug("%s: setup fifo_mode %d\n", musb_driver_name, fifo_mode);
1332 
1333 done:
1334 	offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
1335 	/* assert(offset > 0) */
1336 
1337 	/* NOTE:  for RTL versions >= 1.400 EPINFO and RAMINFO would
1338 	 * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
1339 	 */
1340 
1341 	for (i = 0; i < n; i++) {
1342 		u8	epn = cfg->hw_ep_num;
1343 
1344 		if (epn >= musb->config->num_eps) {
1345 			pr_debug("%s: invalid ep %d\n",
1346 					musb_driver_name, epn);
1347 			return -EINVAL;
1348 		}
1349 		offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
1350 		if (offset < 0) {
1351 			pr_debug("%s: mem overrun, ep %d\n",
1352 					musb_driver_name, epn);
1353 			return -EINVAL;
1354 		}
1355 		epn++;
1356 		musb->nr_endpoints = max(epn, musb->nr_endpoints);
1357 	}
1358 
1359 	pr_debug("%s: %d/%d max ep, %d/%d memory\n", musb_driver_name, n + 1,
1360 		 musb->config->num_eps * 2 - 1, offset,
1361 		 (1 << (musb->config->ram_bits + 2)));
1362 
1363 	if (!musb->bulk_ep) {
1364 		pr_debug("%s: missing bulk\n", musb_driver_name);
1365 		return -EINVAL;
1366 	}
1367 
1368 	return 0;
1369 }
1370 
1371 
1372 /*
1373  * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
1374  * @param musb the controller
1375  */
1376 static int __devinit ep_config_from_hw(struct musb *musb)
1377 {
1378 	u8 epnum = 0;
1379 	struct musb_hw_ep *hw_ep;
1380 	void *mbase = musb->mregs;
1381 	int ret = 0;
1382 
1383 	dev_dbg(musb->controller, "<== static silicon ep config\n");
1384 
1385 	/* FIXME pick up ep0 maxpacket size */
1386 
1387 	for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
1388 		musb_ep_select(mbase, epnum);
1389 		hw_ep = musb->endpoints + epnum;
1390 
1391 		ret = musb_read_fifosize(musb, hw_ep, epnum);
1392 		if (ret < 0)
1393 			break;
1394 
1395 		/* FIXME set up hw_ep->{rx,tx}_double_buffered */
1396 
1397 		/* pick an RX/TX endpoint for bulk */
1398 		if (hw_ep->max_packet_sz_tx < 512
1399 				|| hw_ep->max_packet_sz_rx < 512)
1400 			continue;
1401 
1402 		/* REVISIT:  this algorithm is lazy, we should at least
1403 		 * try to pick a double buffered endpoint.
1404 		 */
1405 		if (musb->bulk_ep)
1406 			continue;
1407 		musb->bulk_ep = hw_ep;
1408 	}
1409 
1410 	if (!musb->bulk_ep) {
1411 		pr_debug("%s: missing bulk\n", musb_driver_name);
1412 		return -EINVAL;
1413 	}
1414 
1415 	return 0;
1416 }
1417 
1418 enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
1419 
1420 /* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
1421  * configure endpoints, or take their config from silicon
1422  */
1423 static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
1424 {
1425 	u8 reg;
1426 	char *type;
1427 	char aInfo[90], aRevision[32], aDate[12];
1428 	void __iomem	*mbase = musb->mregs;
1429 	int		status = 0;
1430 	int		i;
1431 
1432 	/* log core options (read using indexed model) */
1433 	reg = musb_read_configdata(mbase);
1434 
1435 	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
1436 	if (reg & MUSB_CONFIGDATA_DYNFIFO) {
1437 		strcat(aInfo, ", dyn FIFOs");
1438 		musb->dyn_fifo = true;
1439 	}
1440 #ifndef CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
1441 	if (reg & MUSB_CONFIGDATA_MPRXE) {
1442 		strcat(aInfo, ", bulk combine");
1443 		musb->bulk_combine = true;
1444 	}
1445 	if (reg & MUSB_CONFIGDATA_MPTXE) {
1446 		strcat(aInfo, ", bulk split");
1447 		musb->bulk_split = true;
1448 	}
1449 #else
1450 	musb->bulk_combine = false;
1451 	musb->bulk_split = false;
1452 #endif
1453 	if (reg & MUSB_CONFIGDATA_HBRXE) {
1454 		strcat(aInfo, ", HB-ISO Rx");
1455 		musb->hb_iso_rx = true;
1456 	}
1457 	if (reg & MUSB_CONFIGDATA_HBTXE) {
1458 		strcat(aInfo, ", HB-ISO Tx");
1459 		musb->hb_iso_tx = true;
1460 	}
1461 	if (reg & MUSB_CONFIGDATA_SOFTCONE)
1462 		strcat(aInfo, ", SoftConn");
1463 
1464 	pr_debug("%s:ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo);
1465 
1466 	aDate[0] = 0;
1467 	if (MUSB_CONTROLLER_MHDRC == musb_type) {
1468 		musb->is_multipoint = 1;
1469 		type = "M";
1470 	} else {
1471 		musb->is_multipoint = 0;
1472 		type = "";
1473 #ifndef	CONFIG_USB_OTG_BLACKLIST_HUB
1474 		printk(KERN_ERR
1475 			"%s: kernel must blacklist external hubs\n",
1476 			musb_driver_name);
1477 #endif
1478 	}
1479 
1480 	/* log release info */
1481 	musb->hwvers = musb_read_hwvers(mbase);
1482 	snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers),
1483 		MUSB_HWVERS_MINOR(musb->hwvers),
1484 		(musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
1485 	pr_debug("%s: %sHDRC RTL version %s %s\n", musb_driver_name, type,
1486 		 aRevision, aDate);
1487 
1488 	/* configure ep0 */
1489 	musb_configure_ep0(musb);
1490 
1491 	/* discover endpoint configuration */
1492 	musb->nr_endpoints = 1;
1493 	musb->epmask = 1;
1494 
1495 	if (musb->dyn_fifo)
1496 		status = ep_config_from_table(musb);
1497 	else
1498 		status = ep_config_from_hw(musb);
1499 
1500 	if (status < 0)
1501 		return status;
1502 
1503 	/* finish init, and print endpoint config */
1504 	for (i = 0; i < musb->nr_endpoints; i++) {
1505 		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
1506 
1507 		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
1508 #if defined(CONFIG_USB_MUSB_TUSB6010) || defined (CONFIG_USB_MUSB_TUSB6010_MODULE)
1509 		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
1510 		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
1511 		hw_ep->fifo_sync_va =
1512 			musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i);
1513 
1514 		if (i == 0)
1515 			hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
1516 		else
1517 			hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2);
1518 #endif
1519 
1520 		hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
1521 		hw_ep->target_regs = musb_read_target_reg_base(i, mbase);
1522 		hw_ep->rx_reinit = 1;
1523 		hw_ep->tx_reinit = 1;
1524 
1525 		if (hw_ep->max_packet_sz_tx) {
1526 			dev_dbg(musb->controller,
1527 				"%s: hw_ep %d%s, %smax %d\n",
1528 				musb_driver_name, i,
1529 				hw_ep->is_shared_fifo ? "shared" : "tx",
1530 				hw_ep->tx_double_buffered
1531 					? "doublebuffer, " : "",
1532 				hw_ep->max_packet_sz_tx);
1533 		}
1534 		if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
1535 			dev_dbg(musb->controller,
1536 				"%s: hw_ep %d%s, %smax %d\n",
1537 				musb_driver_name, i,
1538 				"rx",
1539 				hw_ep->rx_double_buffered
1540 					? "doublebuffer, " : "",
1541 				hw_ep->max_packet_sz_rx);
1542 		}
1543 		if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
1544 			dev_dbg(musb->controller, "hw_ep %d not configured\n", i);
1545 	}
1546 
1547 	return 0;
1548 }
1549 
1550 /*-------------------------------------------------------------------------*/
1551 
1552 #if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
1553 	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500)
1554 
1555 static irqreturn_t generic_interrupt(int irq, void *__hci)
1556 {
1557 	unsigned long	flags;
1558 	irqreturn_t	retval = IRQ_NONE;
1559 	struct musb	*musb = __hci;
1560 
1561 	spin_lock_irqsave(&musb->lock, flags);
1562 
1563 	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
1564 	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
1565 	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
1566 
1567 	if (musb->int_usb || musb->int_tx || musb->int_rx)
1568 		retval = musb_interrupt(musb);
1569 
1570 	spin_unlock_irqrestore(&musb->lock, flags);
1571 
1572 	return retval;
1573 }
1574 
1575 #else
1576 #define generic_interrupt	NULL
1577 #endif
1578 
1579 /*
1580  * handle all the irqs defined by the HDRC core. for now we expect:  other
1581  * irq sources (phy, dma, etc) will be handled first, musb->int_* values
1582  * will be assigned, and the irq will already have been acked.
1583  *
1584  * called in irq context with spinlock held, irqs blocked
1585  */
1586 irqreturn_t musb_interrupt(struct musb *musb)
1587 {
1588 	irqreturn_t	retval = IRQ_NONE;
1589 	u8		devctl, power;
1590 	int		ep_num;
1591 	u32		reg;
1592 
1593 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1594 	power = musb_readb(musb->mregs, MUSB_POWER);
1595 
1596 	dev_dbg(musb->controller, "** IRQ %s usb%04x tx%04x rx%04x\n",
1597 		(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
1598 		musb->int_usb, musb->int_tx, musb->int_rx);
1599 
1600 	/* the core can interrupt us for multiple reasons; docs have
1601 	 * a generic interrupt flowchart to follow
1602 	 */
1603 	if (musb->int_usb)
1604 		retval |= musb_stage0_irq(musb, musb->int_usb,
1605 				devctl, power);
1606 
1607 	/* "stage 1" is handling endpoint irqs */
1608 
1609 	/* handle endpoint 0 first */
1610 	if (musb->int_tx & 1) {
1611 		if (devctl & MUSB_DEVCTL_HM) {
1612 			if (is_host_capable())
1613 				retval |= musb_h_ep0_irq(musb);
1614 		} else {
1615 			if (is_peripheral_capable())
1616 				retval |= musb_g_ep0_irq(musb);
1617 		}
1618 	}
1619 
1620 	/* RX on endpoints 1-15 */
1621 	reg = musb->int_rx >> 1;
1622 	ep_num = 1;
1623 	while (reg) {
1624 		if (reg & 1) {
1625 			/* musb_ep_select(musb->mregs, ep_num); */
1626 			/* REVISIT just retval = ep->rx_irq(...) */
1627 			retval = IRQ_HANDLED;
1628 			if (devctl & MUSB_DEVCTL_HM) {
1629 				if (is_host_capable())
1630 					musb_host_rx(musb, ep_num);
1631 			} else {
1632 				if (is_peripheral_capable())
1633 					musb_g_rx(musb, ep_num);
1634 			}
1635 		}
1636 
1637 		reg >>= 1;
1638 		ep_num++;
1639 	}
1640 
1641 	/* TX on endpoints 1-15 */
1642 	reg = musb->int_tx >> 1;
1643 	ep_num = 1;
1644 	while (reg) {
1645 		if (reg & 1) {
1646 			/* musb_ep_select(musb->mregs, ep_num); */
1647 			/* REVISIT just retval |= ep->tx_irq(...) */
1648 			retval = IRQ_HANDLED;
1649 			if (devctl & MUSB_DEVCTL_HM) {
1650 				if (is_host_capable())
1651 					musb_host_tx(musb, ep_num);
1652 			} else {
1653 				if (is_peripheral_capable())
1654 					musb_g_tx(musb, ep_num);
1655 			}
1656 		}
1657 		reg >>= 1;
1658 		ep_num++;
1659 	}
1660 
1661 	return retval;
1662 }
1663 EXPORT_SYMBOL_GPL(musb_interrupt);
1664 
1665 #ifndef CONFIG_USB_MUSB_PIO_ONLY
1666 static bool __devinitdata use_dma = 1;
1667 
1668 /* "modprobe ... use_dma=0" etc */
1669 module_param(use_dma, bool, 0);
1670 MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
1671 
1672 void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
1673 {
1674 	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1675 
1676 	/* called with controller lock already held */
1677 
1678 	if (!epnum) {
1679 #ifndef CONFIG_USB_TUSB_OMAP_DMA
1680 		if (!is_cppi_enabled()) {
1681 			/* endpoint 0 */
1682 			if (devctl & MUSB_DEVCTL_HM)
1683 				musb_h_ep0_irq(musb);
1684 			else
1685 				musb_g_ep0_irq(musb);
1686 		}
1687 #endif
1688 	} else {
1689 		/* endpoints 1..15 */
1690 		if (transmit) {
1691 			if (devctl & MUSB_DEVCTL_HM) {
1692 				if (is_host_capable())
1693 					musb_host_tx(musb, epnum);
1694 			} else {
1695 				if (is_peripheral_capable())
1696 					musb_g_tx(musb, epnum);
1697 			}
1698 		} else {
1699 			/* receive */
1700 			if (devctl & MUSB_DEVCTL_HM) {
1701 				if (is_host_capable())
1702 					musb_host_rx(musb, epnum);
1703 			} else {
1704 				if (is_peripheral_capable())
1705 					musb_g_rx(musb, epnum);
1706 			}
1707 		}
1708 	}
1709 }
1710 EXPORT_SYMBOL_GPL(musb_dma_completion);
1711 
1712 #else
1713 #define use_dma			0
1714 #endif
1715 
1716 /*-------------------------------------------------------------------------*/
1717 
1718 #ifdef CONFIG_SYSFS
1719 
1720 static ssize_t
1721 musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
1722 {
1723 	struct musb *musb = dev_to_musb(dev);
1724 	unsigned long flags;
1725 	int ret = -EINVAL;
1726 
1727 	spin_lock_irqsave(&musb->lock, flags);
1728 	ret = sprintf(buf, "%s\n", otg_state_string(musb->xceiv->state));
1729 	spin_unlock_irqrestore(&musb->lock, flags);
1730 
1731 	return ret;
1732 }
1733 
1734 static ssize_t
1735 musb_mode_store(struct device *dev, struct device_attribute *attr,
1736 		const char *buf, size_t n)
1737 {
1738 	struct musb	*musb = dev_to_musb(dev);
1739 	unsigned long	flags;
1740 	int		status;
1741 
1742 	spin_lock_irqsave(&musb->lock, flags);
1743 	if (sysfs_streq(buf, "host"))
1744 		status = musb_platform_set_mode(musb, MUSB_HOST);
1745 	else if (sysfs_streq(buf, "peripheral"))
1746 		status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
1747 	else if (sysfs_streq(buf, "otg"))
1748 		status = musb_platform_set_mode(musb, MUSB_OTG);
1749 	else
1750 		status = -EINVAL;
1751 	spin_unlock_irqrestore(&musb->lock, flags);
1752 
1753 	return (status == 0) ? n : status;
1754 }
1755 static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store);
1756 
1757 static ssize_t
1758 musb_vbus_store(struct device *dev, struct device_attribute *attr,
1759 		const char *buf, size_t n)
1760 {
1761 	struct musb	*musb = dev_to_musb(dev);
1762 	unsigned long	flags;
1763 	unsigned long	val;
1764 
1765 	if (sscanf(buf, "%lu", &val) < 1) {
1766 		dev_err(dev, "Invalid VBUS timeout ms value\n");
1767 		return -EINVAL;
1768 	}
1769 
1770 	spin_lock_irqsave(&musb->lock, flags);
1771 	/* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
1772 	musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
1773 	if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON)
1774 		musb->is_active = 0;
1775 	musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
1776 	spin_unlock_irqrestore(&musb->lock, flags);
1777 
1778 	return n;
1779 }
1780 
1781 static ssize_t
1782 musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
1783 {
1784 	struct musb	*musb = dev_to_musb(dev);
1785 	unsigned long	flags;
1786 	unsigned long	val;
1787 	int		vbus;
1788 
1789 	spin_lock_irqsave(&musb->lock, flags);
1790 	val = musb->a_wait_bcon;
1791 	/* FIXME get_vbus_status() is normally #defined as false...
1792 	 * and is effectively TUSB-specific.
1793 	 */
1794 	vbus = musb_platform_get_vbus_status(musb);
1795 	spin_unlock_irqrestore(&musb->lock, flags);
1796 
1797 	return sprintf(buf, "Vbus %s, timeout %lu msec\n",
1798 			vbus ? "on" : "off", val);
1799 }
1800 static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
1801 
1802 /* Gadget drivers can't know that a host is connected so they might want
1803  * to start SRP, but users can.  This allows userspace to trigger SRP.
1804  */
1805 static ssize_t
1806 musb_srp_store(struct device *dev, struct device_attribute *attr,
1807 		const char *buf, size_t n)
1808 {
1809 	struct musb	*musb = dev_to_musb(dev);
1810 	unsigned short	srp;
1811 
1812 	if (sscanf(buf, "%hu", &srp) != 1
1813 			|| (srp != 1)) {
1814 		dev_err(dev, "SRP: Value must be 1\n");
1815 		return -EINVAL;
1816 	}
1817 
1818 	if (srp == 1)
1819 		musb_g_wakeup(musb);
1820 
1821 	return n;
1822 }
1823 static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
1824 
1825 static struct attribute *musb_attributes[] = {
1826 	&dev_attr_mode.attr,
1827 	&dev_attr_vbus.attr,
1828 	&dev_attr_srp.attr,
1829 	NULL
1830 };
1831 
1832 static const struct attribute_group musb_attr_group = {
1833 	.attrs = musb_attributes,
1834 };
1835 
1836 #endif	/* sysfs */
1837 
1838 #ifndef __UBOOT__
1839 /* Only used to provide driver mode change events */
1840 static void musb_irq_work(struct work_struct *data)
1841 {
1842 	struct musb *musb = container_of(data, struct musb, irq_work);
1843 	static int old_state;
1844 
1845 	if (musb->xceiv->state != old_state) {
1846 		old_state = musb->xceiv->state;
1847 		sysfs_notify(&musb->controller->kobj, NULL, "mode");
1848 	}
1849 }
1850 #endif
1851 
1852 /* --------------------------------------------------------------------------
1853  * Init support
1854  */
1855 
1856 static struct musb *__devinit
1857 allocate_instance(struct device *dev,
1858 		struct musb_hdrc_config *config, void __iomem *mbase)
1859 {
1860 	struct musb		*musb;
1861 	struct musb_hw_ep	*ep;
1862 	int			epnum;
1863 #ifndef __UBOOT__
1864 	struct usb_hcd	*hcd;
1865 
1866 	hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
1867 	if (!hcd)
1868 		return NULL;
1869 	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
1870 
1871 	musb = hcd_to_musb(hcd);
1872 #else
1873 	musb = calloc(1, sizeof(*musb));
1874 	if (!musb)
1875 		return NULL;
1876 #endif
1877 	INIT_LIST_HEAD(&musb->control);
1878 	INIT_LIST_HEAD(&musb->in_bulk);
1879 	INIT_LIST_HEAD(&musb->out_bulk);
1880 
1881 #ifndef __UBOOT__
1882 	hcd->uses_new_polling = 1;
1883 	hcd->has_tt = 1;
1884 #endif
1885 
1886 	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
1887 	musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
1888 	dev_set_drvdata(dev, musb);
1889 	musb->mregs = mbase;
1890 	musb->ctrl_base = mbase;
1891 	musb->nIrq = -ENODEV;
1892 	musb->config = config;
1893 	BUG_ON(musb->config->num_eps > MUSB_C_NUM_EPS);
1894 	for (epnum = 0, ep = musb->endpoints;
1895 			epnum < musb->config->num_eps;
1896 			epnum++, ep++) {
1897 		ep->musb = musb;
1898 		ep->epnum = epnum;
1899 	}
1900 
1901 	musb->controller = dev;
1902 
1903 	return musb;
1904 }
1905 
1906 static void musb_free(struct musb *musb)
1907 {
1908 	/* this has multiple entry modes. it handles fault cleanup after
1909 	 * probe(), where things may be partially set up, as well as rmmod
1910 	 * cleanup after everything's been de-activated.
1911 	 */
1912 
1913 #ifdef CONFIG_SYSFS
1914 	sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
1915 #endif
1916 
1917 	if (musb->nIrq >= 0) {
1918 		if (musb->irq_wake)
1919 			disable_irq_wake(musb->nIrq);
1920 		free_irq(musb->nIrq, musb);
1921 	}
1922 	if (is_dma_capable() && musb->dma_controller) {
1923 		struct dma_controller	*c = musb->dma_controller;
1924 
1925 		(void) c->stop(c);
1926 		dma_controller_destroy(c);
1927 	}
1928 
1929 	kfree(musb);
1930 }
1931 
1932 /*
1933  * Perform generic per-controller initialization.
1934  *
1935  * @pDevice: the controller (already clocked, etc)
1936  * @nIrq: irq
1937  * @mregs: virtual address of controller registers,
1938  *	not yet corrected for platform-specific offsets
1939  */
1940 #ifndef __UBOOT__
1941 static int __devinit
1942 musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
1943 #else
1944 struct musb *
1945 musb_init_controller(struct musb_hdrc_platform_data *plat, struct device *dev,
1946 			     void *ctrl)
1947 #endif
1948 {
1949 	int			status;
1950 	struct musb		*musb;
1951 #ifndef __UBOOT__
1952 	struct musb_hdrc_platform_data *plat = dev->platform_data;
1953 #else
1954 	int nIrq = 0;
1955 #endif
1956 
1957 	/* The driver might handle more features than the board; OK.
1958 	 * Fail when the board needs a feature that's not enabled.
1959 	 */
1960 	if (!plat) {
1961 		dev_dbg(dev, "no platform_data?\n");
1962 		status = -ENODEV;
1963 		goto fail0;
1964 	}
1965 
1966 	/* allocate */
1967 	musb = allocate_instance(dev, plat->config, ctrl);
1968 	if (!musb) {
1969 		status = -ENOMEM;
1970 		goto fail0;
1971 	}
1972 
1973 	pm_runtime_use_autosuspend(musb->controller);
1974 	pm_runtime_set_autosuspend_delay(musb->controller, 200);
1975 	pm_runtime_enable(musb->controller);
1976 
1977 	spin_lock_init(&musb->lock);
1978 	musb->board_mode = plat->mode;
1979 	musb->board_set_power = plat->set_power;
1980 	musb->min_power = plat->min_power;
1981 	musb->ops = plat->platform_ops;
1982 
1983 	/* The musb_platform_init() call:
1984 	 *   - adjusts musb->mregs and musb->isr if needed,
1985 	 *   - may initialize an integrated tranceiver
1986 	 *   - initializes musb->xceiv, usually by otg_get_phy()
1987 	 *   - stops powering VBUS
1988 	 *
1989 	 * There are various transceiver configurations.  Blackfin,
1990 	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
1991 	 * external/discrete ones in various flavors (twl4030 family,
1992 	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
1993 	 */
1994 	musb->isr = generic_interrupt;
1995 	status = musb_platform_init(musb);
1996 	if (status < 0)
1997 		goto fail1;
1998 
1999 	if (!musb->isr) {
2000 		status = -ENODEV;
2001 		goto fail2;
2002 	}
2003 
2004 #ifndef __UBOOT__
2005 	if (!musb->xceiv->io_ops) {
2006 		musb->xceiv->io_dev = musb->controller;
2007 		musb->xceiv->io_priv = musb->mregs;
2008 		musb->xceiv->io_ops = &musb_ulpi_access;
2009 	}
2010 #endif
2011 
2012 	pm_runtime_get_sync(musb->controller);
2013 
2014 #ifndef CONFIG_USB_MUSB_PIO_ONLY
2015 	if (use_dma && dev->dma_mask) {
2016 		struct dma_controller	*c;
2017 
2018 		c = dma_controller_create(musb, musb->mregs);
2019 		musb->dma_controller = c;
2020 		if (c)
2021 			(void) c->start(c);
2022 	}
2023 #endif
2024 #ifndef __UBOOT__
2025 	/* ideally this would be abstracted in platform setup */
2026 	if (!is_dma_capable() || !musb->dma_controller)
2027 		dev->dma_mask = NULL;
2028 #endif
2029 
2030 	/* be sure interrupts are disabled before connecting ISR */
2031 	musb_platform_disable(musb);
2032 	musb_generic_disable(musb);
2033 
2034 	/* setup musb parts of the core (especially endpoints) */
2035 	status = musb_core_init(plat->config->multipoint
2036 			? MUSB_CONTROLLER_MHDRC
2037 			: MUSB_CONTROLLER_HDRC, musb);
2038 	if (status < 0)
2039 		goto fail3;
2040 
2041 	setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
2042 
2043 	/* Init IRQ workqueue before request_irq */
2044 	INIT_WORK(&musb->irq_work, musb_irq_work);
2045 
2046 	/* attach to the IRQ */
2047 	if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
2048 		dev_err(dev, "request_irq %d failed!\n", nIrq);
2049 		status = -ENODEV;
2050 		goto fail3;
2051 	}
2052 	musb->nIrq = nIrq;
2053 /* FIXME this handles wakeup irqs wrong */
2054 	if (enable_irq_wake(nIrq) == 0) {
2055 		musb->irq_wake = 1;
2056 		device_init_wakeup(dev, 1);
2057 	} else {
2058 		musb->irq_wake = 0;
2059 	}
2060 
2061 #ifndef __UBOOT__
2062 	/* host side needs more setup */
2063 	if (is_host_enabled(musb)) {
2064 		struct usb_hcd	*hcd = musb_to_hcd(musb);
2065 
2066 		otg_set_host(musb->xceiv->otg, &hcd->self);
2067 
2068 		if (is_otg_enabled(musb))
2069 			hcd->self.otg_port = 1;
2070 		musb->xceiv->otg->host = &hcd->self;
2071 		hcd->power_budget = 2 * (plat->power ? : 250);
2072 
2073 		/* program PHY to use external vBus if required */
2074 		if (plat->extvbus) {
2075 			u8 busctl = musb_read_ulpi_buscontrol(musb->mregs);
2076 			busctl |= MUSB_ULPI_USE_EXTVBUS;
2077 			musb_write_ulpi_buscontrol(musb->mregs, busctl);
2078 		}
2079 	}
2080 #endif
2081 
2082 	/* For the host-only role, we can activate right away.
2083 	 * (We expect the ID pin to be forcibly grounded!!)
2084 	 * Otherwise, wait till the gadget driver hooks up.
2085 	 */
2086 	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
2087 		struct usb_hcd	*hcd = musb_to_hcd(musb);
2088 
2089 		MUSB_HST_MODE(musb);
2090 #ifndef __UBOOT__
2091 		musb->xceiv->otg->default_a = 1;
2092 		musb->xceiv->state = OTG_STATE_A_IDLE;
2093 
2094 		status = usb_add_hcd(musb_to_hcd(musb), 0, 0);
2095 
2096 		hcd->self.uses_pio_for_control = 1;
2097 		dev_dbg(musb->controller, "%s mode, status %d, devctl %02x %c\n",
2098 			"HOST", status,
2099 			musb_readb(musb->mregs, MUSB_DEVCTL),
2100 			(musb_readb(musb->mregs, MUSB_DEVCTL)
2101 					& MUSB_DEVCTL_BDEVICE
2102 				? 'B' : 'A'));
2103 #endif
2104 
2105 	} else /* peripheral is enabled */ {
2106 		MUSB_DEV_MODE(musb);
2107 #ifndef __UBOOT__
2108 		musb->xceiv->otg->default_a = 0;
2109 		musb->xceiv->state = OTG_STATE_B_IDLE;
2110 #endif
2111 
2112 		if (is_peripheral_capable())
2113 			status = musb_gadget_setup(musb);
2114 
2115 #ifndef __UBOOT__
2116 		dev_dbg(musb->controller, "%s mode, status %d, dev%02x\n",
2117 			is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
2118 			status,
2119 			musb_readb(musb->mregs, MUSB_DEVCTL));
2120 #endif
2121 
2122 	}
2123 	if (status < 0)
2124 		goto fail3;
2125 
2126 	status = musb_init_debugfs(musb);
2127 	if (status < 0)
2128 		goto fail4;
2129 
2130 #ifdef CONFIG_SYSFS
2131 	status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
2132 	if (status)
2133 		goto fail5;
2134 #endif
2135 
2136 	pm_runtime_put(musb->controller);
2137 
2138 	pr_debug("USB %s mode controller at %p using %s, IRQ %d\n",
2139 			({char *s;
2140 			 switch (musb->board_mode) {
2141 			 case MUSB_HOST:		s = "Host"; break;
2142 			 case MUSB_PERIPHERAL:	s = "Peripheral"; break;
2143 			 default:		s = "OTG"; break;
2144 			 }; s; }),
2145 			ctrl,
2146 			(is_dma_capable() && musb->dma_controller)
2147 			? "DMA" : "PIO",
2148 			musb->nIrq);
2149 
2150 #ifndef __UBOOT__
2151 	return 0;
2152 #else
2153 	return status == 0 ? musb : NULL;
2154 #endif
2155 
2156 fail5:
2157 	musb_exit_debugfs(musb);
2158 
2159 fail4:
2160 #ifndef __UBOOT__
2161 	if (!is_otg_enabled(musb) && is_host_enabled(musb))
2162 		usb_remove_hcd(musb_to_hcd(musb));
2163 	else
2164 #endif
2165 		musb_gadget_cleanup(musb);
2166 
2167 fail3:
2168 	pm_runtime_put_sync(musb->controller);
2169 
2170 fail2:
2171 	if (musb->irq_wake)
2172 		device_init_wakeup(dev, 0);
2173 	musb_platform_exit(musb);
2174 
2175 fail1:
2176 	dev_err(musb->controller,
2177 		"musb_init_controller failed with status %d\n", status);
2178 
2179 	musb_free(musb);
2180 
2181 fail0:
2182 
2183 #ifndef __UBOOT__
2184 	return status;
2185 #else
2186 	return status == 0 ? musb : NULL;
2187 #endif
2188 
2189 }
2190 
2191 /*-------------------------------------------------------------------------*/
2192 
2193 /* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
2194  * bridge to a platform device; this driver then suffices.
2195  */
2196 
2197 #ifndef CONFIG_USB_MUSB_PIO_ONLY
2198 static u64	*orig_dma_mask;
2199 #endif
2200 
2201 #ifndef __UBOOT__
2202 static int __devinit musb_probe(struct platform_device *pdev)
2203 {
2204 	struct device	*dev = &pdev->dev;
2205 	int		irq = platform_get_irq_byname(pdev, "mc");
2206 	int		status;
2207 	struct resource	*iomem;
2208 	void __iomem	*base;
2209 
2210 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2211 	if (!iomem || irq <= 0)
2212 		return -ENODEV;
2213 
2214 	base = ioremap(iomem->start, resource_size(iomem));
2215 	if (!base) {
2216 		dev_err(dev, "ioremap failed\n");
2217 		return -ENOMEM;
2218 	}
2219 
2220 #ifndef CONFIG_USB_MUSB_PIO_ONLY
2221 	/* clobbered by use_dma=n */
2222 	orig_dma_mask = dev->dma_mask;
2223 #endif
2224 	status = musb_init_controller(dev, irq, base);
2225 	if (status < 0)
2226 		iounmap(base);
2227 
2228 	return status;
2229 }
2230 
2231 static int __devexit musb_remove(struct platform_device *pdev)
2232 {
2233 	struct musb	*musb = dev_to_musb(&pdev->dev);
2234 	void __iomem	*ctrl_base = musb->ctrl_base;
2235 
2236 	/* this gets called on rmmod.
2237 	 *  - Host mode: host may still be active
2238 	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
2239 	 *  - OTG mode: both roles are deactivated (or never-activated)
2240 	 */
2241 	musb_exit_debugfs(musb);
2242 	musb_shutdown(pdev);
2243 
2244 	musb_free(musb);
2245 	iounmap(ctrl_base);
2246 	device_init_wakeup(&pdev->dev, 0);
2247 #ifndef CONFIG_USB_MUSB_PIO_ONLY
2248 	pdev->dev.dma_mask = orig_dma_mask;
2249 #endif
2250 	return 0;
2251 }
2252 
2253 #ifdef	CONFIG_PM
2254 
2255 static void musb_save_context(struct musb *musb)
2256 {
2257 	int i;
2258 	void __iomem *musb_base = musb->mregs;
2259 	void __iomem *epio;
2260 
2261 	if (is_host_enabled(musb)) {
2262 		musb->context.frame = musb_readw(musb_base, MUSB_FRAME);
2263 		musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
2264 		musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
2265 	}
2266 	musb->context.power = musb_readb(musb_base, MUSB_POWER);
2267 	musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
2268 	musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
2269 	musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
2270 	musb->context.index = musb_readb(musb_base, MUSB_INDEX);
2271 	musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
2272 
2273 	for (i = 0; i < musb->config->num_eps; ++i) {
2274 		struct musb_hw_ep	*hw_ep;
2275 
2276 		hw_ep = &musb->endpoints[i];
2277 		if (!hw_ep)
2278 			continue;
2279 
2280 		epio = hw_ep->regs;
2281 		if (!epio)
2282 			continue;
2283 
2284 		musb_writeb(musb_base, MUSB_INDEX, i);
2285 		musb->context.index_regs[i].txmaxp =
2286 			musb_readw(epio, MUSB_TXMAXP);
2287 		musb->context.index_regs[i].txcsr =
2288 			musb_readw(epio, MUSB_TXCSR);
2289 		musb->context.index_regs[i].rxmaxp =
2290 			musb_readw(epio, MUSB_RXMAXP);
2291 		musb->context.index_regs[i].rxcsr =
2292 			musb_readw(epio, MUSB_RXCSR);
2293 
2294 		if (musb->dyn_fifo) {
2295 			musb->context.index_regs[i].txfifoadd =
2296 					musb_read_txfifoadd(musb_base);
2297 			musb->context.index_regs[i].rxfifoadd =
2298 					musb_read_rxfifoadd(musb_base);
2299 			musb->context.index_regs[i].txfifosz =
2300 					musb_read_txfifosz(musb_base);
2301 			musb->context.index_regs[i].rxfifosz =
2302 					musb_read_rxfifosz(musb_base);
2303 		}
2304 		if (is_host_enabled(musb)) {
2305 			musb->context.index_regs[i].txtype =
2306 				musb_readb(epio, MUSB_TXTYPE);
2307 			musb->context.index_regs[i].txinterval =
2308 				musb_readb(epio, MUSB_TXINTERVAL);
2309 			musb->context.index_regs[i].rxtype =
2310 				musb_readb(epio, MUSB_RXTYPE);
2311 			musb->context.index_regs[i].rxinterval =
2312 				musb_readb(epio, MUSB_RXINTERVAL);
2313 
2314 			musb->context.index_regs[i].txfunaddr =
2315 				musb_read_txfunaddr(musb_base, i);
2316 			musb->context.index_regs[i].txhubaddr =
2317 				musb_read_txhubaddr(musb_base, i);
2318 			musb->context.index_regs[i].txhubport =
2319 				musb_read_txhubport(musb_base, i);
2320 
2321 			musb->context.index_regs[i].rxfunaddr =
2322 				musb_read_rxfunaddr(musb_base, i);
2323 			musb->context.index_regs[i].rxhubaddr =
2324 				musb_read_rxhubaddr(musb_base, i);
2325 			musb->context.index_regs[i].rxhubport =
2326 				musb_read_rxhubport(musb_base, i);
2327 		}
2328 	}
2329 }
2330 
2331 static void musb_restore_context(struct musb *musb)
2332 {
2333 	int i;
2334 	void __iomem *musb_base = musb->mregs;
2335 	void __iomem *ep_target_regs;
2336 	void __iomem *epio;
2337 
2338 	if (is_host_enabled(musb)) {
2339 		musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
2340 		musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
2341 		musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
2342 	}
2343 	musb_writeb(musb_base, MUSB_POWER, musb->context.power);
2344 	musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe);
2345 	musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe);
2346 	musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
2347 	musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
2348 
2349 	for (i = 0; i < musb->config->num_eps; ++i) {
2350 		struct musb_hw_ep	*hw_ep;
2351 
2352 		hw_ep = &musb->endpoints[i];
2353 		if (!hw_ep)
2354 			continue;
2355 
2356 		epio = hw_ep->regs;
2357 		if (!epio)
2358 			continue;
2359 
2360 		musb_writeb(musb_base, MUSB_INDEX, i);
2361 		musb_writew(epio, MUSB_TXMAXP,
2362 			musb->context.index_regs[i].txmaxp);
2363 		musb_writew(epio, MUSB_TXCSR,
2364 			musb->context.index_regs[i].txcsr);
2365 		musb_writew(epio, MUSB_RXMAXP,
2366 			musb->context.index_regs[i].rxmaxp);
2367 		musb_writew(epio, MUSB_RXCSR,
2368 			musb->context.index_regs[i].rxcsr);
2369 
2370 		if (musb->dyn_fifo) {
2371 			musb_write_txfifosz(musb_base,
2372 				musb->context.index_regs[i].txfifosz);
2373 			musb_write_rxfifosz(musb_base,
2374 				musb->context.index_regs[i].rxfifosz);
2375 			musb_write_txfifoadd(musb_base,
2376 				musb->context.index_regs[i].txfifoadd);
2377 			musb_write_rxfifoadd(musb_base,
2378 				musb->context.index_regs[i].rxfifoadd);
2379 		}
2380 
2381 		if (is_host_enabled(musb)) {
2382 			musb_writeb(epio, MUSB_TXTYPE,
2383 				musb->context.index_regs[i].txtype);
2384 			musb_writeb(epio, MUSB_TXINTERVAL,
2385 				musb->context.index_regs[i].txinterval);
2386 			musb_writeb(epio, MUSB_RXTYPE,
2387 				musb->context.index_regs[i].rxtype);
2388 			musb_writeb(epio, MUSB_RXINTERVAL,
2389 
2390 			musb->context.index_regs[i].rxinterval);
2391 			musb_write_txfunaddr(musb_base, i,
2392 				musb->context.index_regs[i].txfunaddr);
2393 			musb_write_txhubaddr(musb_base, i,
2394 				musb->context.index_regs[i].txhubaddr);
2395 			musb_write_txhubport(musb_base, i,
2396 				musb->context.index_regs[i].txhubport);
2397 
2398 			ep_target_regs =
2399 				musb_read_target_reg_base(i, musb_base);
2400 
2401 			musb_write_rxfunaddr(ep_target_regs,
2402 				musb->context.index_regs[i].rxfunaddr);
2403 			musb_write_rxhubaddr(ep_target_regs,
2404 				musb->context.index_regs[i].rxhubaddr);
2405 			musb_write_rxhubport(ep_target_regs,
2406 				musb->context.index_regs[i].rxhubport);
2407 		}
2408 	}
2409 	musb_writeb(musb_base, MUSB_INDEX, musb->context.index);
2410 }
2411 
2412 static int musb_suspend(struct device *dev)
2413 {
2414 	struct musb	*musb = dev_to_musb(dev);
2415 	unsigned long	flags;
2416 
2417 	spin_lock_irqsave(&musb->lock, flags);
2418 
2419 	if (is_peripheral_active(musb)) {
2420 		/* FIXME force disconnect unless we know USB will wake
2421 		 * the system up quickly enough to respond ...
2422 		 */
2423 	} else if (is_host_active(musb)) {
2424 		/* we know all the children are suspended; sometimes
2425 		 * they will even be wakeup-enabled.
2426 		 */
2427 	}
2428 
2429 	spin_unlock_irqrestore(&musb->lock, flags);
2430 	return 0;
2431 }
2432 
2433 static int musb_resume_noirq(struct device *dev)
2434 {
2435 	/* for static cmos like DaVinci, register values were preserved
2436 	 * unless for some reason the whole soc powered down or the USB
2437 	 * module got reset through the PSC (vs just being disabled).
2438 	 */
2439 	return 0;
2440 }
2441 
2442 static int musb_runtime_suspend(struct device *dev)
2443 {
2444 	struct musb	*musb = dev_to_musb(dev);
2445 
2446 	musb_save_context(musb);
2447 
2448 	return 0;
2449 }
2450 
2451 static int musb_runtime_resume(struct device *dev)
2452 {
2453 	struct musb	*musb = dev_to_musb(dev);
2454 	static int	first = 1;
2455 
2456 	/*
2457 	 * When pm_runtime_get_sync called for the first time in driver
2458 	 * init,  some of the structure is still not initialized which is
2459 	 * used in restore function. But clock needs to be
2460 	 * enabled before any register access, so
2461 	 * pm_runtime_get_sync has to be called.
2462 	 * Also context restore without save does not make
2463 	 * any sense
2464 	 */
2465 	if (!first)
2466 		musb_restore_context(musb);
2467 	first = 0;
2468 
2469 	return 0;
2470 }
2471 
2472 static const struct dev_pm_ops musb_dev_pm_ops = {
2473 	.suspend	= musb_suspend,
2474 	.resume_noirq	= musb_resume_noirq,
2475 	.runtime_suspend = musb_runtime_suspend,
2476 	.runtime_resume = musb_runtime_resume,
2477 };
2478 
2479 #define MUSB_DEV_PM_OPS (&musb_dev_pm_ops)
2480 #else
2481 #define	MUSB_DEV_PM_OPS	NULL
2482 #endif
2483 
2484 static struct platform_driver musb_driver = {
2485 	.driver = {
2486 		.name		= (char *)musb_driver_name,
2487 		.bus		= &platform_bus_type,
2488 		.owner		= THIS_MODULE,
2489 		.pm		= MUSB_DEV_PM_OPS,
2490 	},
2491 	.probe		= musb_probe,
2492 	.remove		= __devexit_p(musb_remove),
2493 	.shutdown	= musb_shutdown,
2494 };
2495 
2496 /*-------------------------------------------------------------------------*/
2497 
2498 static int __init musb_init(void)
2499 {
2500 	if (usb_disabled())
2501 		return 0;
2502 
2503 	pr_info("%s: version " MUSB_VERSION ", "
2504 		"?dma?"
2505 		", "
2506 		"otg (peripheral+host)",
2507 		musb_driver_name);
2508 	return platform_driver_register(&musb_driver);
2509 }
2510 module_init(musb_init);
2511 
2512 static void __exit musb_cleanup(void)
2513 {
2514 	platform_driver_unregister(&musb_driver);
2515 }
2516 module_exit(musb_cleanup);
2517 #endif
2518