1 /*
2  * Copyright (c) 2016 Rockchip, Inc.
3  * Authors: Daniel Meng <daniel.meng@rock-chips.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 #include <common.h>
8 #include <dm.h>
9 #include <fdtdec.h>
10 #include <libfdt.h>
11 #include <malloc.h>
12 #include <usb.h>
13 #include <watchdog.h>
14 #include <asm/gpio.h>
15 #include <linux/errno.h>
16 #include <linux/compat.h>
17 #include <linux/usb/dwc3.h>
18 
19 #include "xhci.h"
20 
21 DECLARE_GLOBAL_DATA_PTR;
22 
23 struct rockchip_xhci_platdata {
24 	fdt_addr_t hcd_base;
25 	fdt_addr_t phy_base;
26 	struct gpio_desc vbus_gpio;
27 };
28 
29 /*
30  * Contains pointers to register base addresses
31  * for the usb controller.
32  */
33 struct rockchip_xhci {
34 	struct usb_platdata usb_plat;
35 	struct xhci_ctrl ctrl;
36 	struct xhci_hccr *hcd;
37 	struct dwc3 *dwc3_reg;
38 };
39 
40 static int xhci_usb_ofdata_to_platdata(struct udevice *dev)
41 {
42 	struct rockchip_xhci_platdata *plat = dev_get_platdata(dev);
43 	struct udevice *child;
44 	int ret = 0;
45 
46 	/*
47 	 * Get the base address for XHCI controller from the device node
48 	 */
49 	plat->hcd_base = dev_get_addr(dev);
50 	if (plat->hcd_base == FDT_ADDR_T_NONE) {
51 		debug("Can't get the XHCI register base address\n");
52 		return -ENXIO;
53 	}
54 
55 	/* Get the base address for usbphy from the device node */
56 	for (device_find_first_child(dev, &child); child;
57 	     device_find_next_child(&child)) {
58 		if (!of_device_is_compatible(child, "rockchip,rk3399-usb3-phy"))
59 			continue;
60 		plat->phy_base = dev_get_addr(child);
61 		break;
62 	}
63 
64 	if (plat->phy_base == FDT_ADDR_T_NONE) {
65 		debug("Can't get the usbphy register address\n");
66 		return -ENXIO;
67 	}
68 
69 	/* Vbus gpio */
70 	ret = gpio_request_by_name(dev, "rockchip,vbus-gpio", 0,
71 				   &plat->vbus_gpio, GPIOD_IS_OUT);
72 	if (ret)
73 		debug("rockchip,vbus-gpio node missing!");
74 
75 	return 0;
76 }
77 
78 /*
79  * rockchip_dwc3_phy_setup() - Configure USB PHY Interface of DWC3 Core
80  * @dwc: Pointer to our controller context structure
81  * @dev: Pointer to ulcass device
82  */
83 static void rockchip_dwc3_phy_setup(struct dwc3 *dwc3_reg,
84 				    struct udevice *dev)
85 {
86 	u32 reg;
87 	const void *blob = gd->fdt_blob;
88 	u32 utmi_bits;
89 
90 	/* Set dwc3 usb2 phy config */
91 	reg = readl(&dwc3_reg->g_usb2phycfg[0]);
92 
93 	if (fdtdec_get_bool(blob, dev_of_offset(dev),
94 			    "snps,dis-enblslpm-quirk"))
95 		reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
96 
97 	utmi_bits = fdtdec_get_int(blob, dev_of_offset(dev),
98 				   "snps,phyif-utmi-bits", -1);
99 	if (utmi_bits == 16) {
100 		reg |= DWC3_GUSB2PHYCFG_PHYIF;
101 		reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
102 		reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT;
103 	} else if (utmi_bits == 8) {
104 		reg &= ~DWC3_GUSB2PHYCFG_PHYIF;
105 		reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
106 		reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT;
107 	}
108 
109 	if (fdtdec_get_bool(blob, dev_of_offset(dev),
110 			    "snps,dis-u2-freeclk-exists-quirk"))
111 		reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
112 
113 	if (fdtdec_get_bool(blob, dev_of_offset(dev),
114 			    "snps,dis-u2-susphy-quirk"))
115 		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
116 
117 	writel(reg, &dwc3_reg->g_usb2phycfg[0]);
118 }
119 
120 static int rockchip_xhci_core_init(struct rockchip_xhci *rkxhci,
121 				   struct udevice *dev)
122 {
123 	int ret;
124 
125 	ret = dwc3_core_init(rkxhci->dwc3_reg);
126 	if (ret) {
127 		debug("failed to initialize core\n");
128 		return ret;
129 	}
130 
131 	rockchip_dwc3_phy_setup(rkxhci->dwc3_reg, dev);
132 
133 	/* We are hard-coding DWC3 core to Host Mode */
134 	dwc3_set_mode(rkxhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
135 
136 	return 0;
137 }
138 
139 static int rockchip_xhci_core_exit(struct rockchip_xhci *rkxhci)
140 {
141 	return 0;
142 }
143 
144 static int xhci_usb_probe(struct udevice *dev)
145 {
146 	struct rockchip_xhci_platdata *plat = dev_get_platdata(dev);
147 	struct rockchip_xhci *ctx = dev_get_priv(dev);
148 	struct xhci_hcor *hcor;
149 	int ret;
150 
151 	ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
152 	ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
153 	hcor = (struct xhci_hcor *)((uint64_t)ctx->hcd +
154 			HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase)));
155 
156 	/* setup the Vbus gpio here */
157 	if (dm_gpio_is_valid(&plat->vbus_gpio))
158 		dm_gpio_set_value(&plat->vbus_gpio, 1);
159 
160 	ret = rockchip_xhci_core_init(ctx, dev);
161 	if (ret) {
162 		debug("XHCI: failed to initialize controller\n");
163 		return ret;
164 	}
165 
166 	return xhci_register(dev, ctx->hcd, hcor);
167 }
168 
169 static int xhci_usb_remove(struct udevice *dev)
170 {
171 	struct rockchip_xhci *ctx = dev_get_priv(dev);
172 	int ret;
173 
174 	ret = xhci_deregister(dev);
175 	if (ret)
176 		return ret;
177 	ret = rockchip_xhci_core_exit(ctx);
178 	if (ret)
179 		return ret;
180 
181 	return 0;
182 }
183 
184 static const struct udevice_id xhci_usb_ids[] = {
185 	{ .compatible = "rockchip,rk3399-xhci" },
186 	{ }
187 };
188 
189 U_BOOT_DRIVER(usb_xhci) = {
190 	.name	= "xhci_rockchip",
191 	.id	= UCLASS_USB,
192 	.of_match = xhci_usb_ids,
193 	.ofdata_to_platdata = xhci_usb_ofdata_to_platdata,
194 	.probe = xhci_usb_probe,
195 	.remove = xhci_usb_remove,
196 	.ops	= &xhci_usb_ops,
197 	.bind	= dm_scan_fdt_dev,
198 	.platdata_auto_alloc_size = sizeof(struct rockchip_xhci_platdata),
199 	.priv_auto_alloc_size = sizeof(struct rockchip_xhci),
200 	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
201 };
202 
203 static const struct udevice_id usb_phy_ids[] = {
204 	{ .compatible = "rockchip,rk3399-usb3-phy" },
205 	{ }
206 };
207 
208 U_BOOT_DRIVER(usb_phy) = {
209 	.name = "usb_phy_rockchip",
210 	.of_match = usb_phy_ids,
211 };
212