xref: /openbmc/u-boot/drivers/usb/host/xhci-fsl.c (revision 23ff8633)
1 /*
2  * Copyright 2015 Freescale Semiconductor, Inc.
3  *
4  * FSL USB HOST xHCI Controller
5  *
6  * Author: Ramneek Mehresh<ramneek.mehresh@freescale.com>
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <common.h>
12 #include <usb.h>
13 #include <asm-generic/errno.h>
14 #include <linux/compat.h>
15 #include <linux/usb/xhci-fsl.h>
16 #include <linux/usb/dwc3.h>
17 #include "xhci.h"
18 
19 /* Declare global data pointer */
20 DECLARE_GLOBAL_DATA_PTR;
21 
22 static struct fsl_xhci fsl_xhci;
23 unsigned long ctr_addr[] = FSL_USB_XHCI_ADDR;
24 
25 __weak int __board_usb_init(int index, enum usb_init_type init)
26 {
27 	return 0;
28 }
29 
30 static int fsl_xhci_core_init(struct fsl_xhci *fsl_xhci)
31 {
32 	int ret = 0;
33 
34 	ret = dwc3_core_init(fsl_xhci->dwc3_reg);
35 	if (ret) {
36 		debug("%s:failed to initialize core\n", __func__);
37 		return ret;
38 	}
39 
40 	/* We are hard-coding DWC3 core to Host Mode */
41 	dwc3_set_mode(fsl_xhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
42 
43 	/* Set GFLADJ_30MHZ as 20h as per XHCI spec default value */
44 	dwc3_set_fladj(fsl_xhci->dwc3_reg, GFLADJ_30MHZ_DEFAULT);
45 
46 	return ret;
47 }
48 
49 static int fsl_xhci_core_exit(struct fsl_xhci *fsl_xhci)
50 {
51 	/*
52 	 * Currently fsl socs do not support PHY shutdown from
53 	 * sw. But this support may be added in future socs.
54 	 */
55 	return 0;
56 }
57 
58 int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
59 {
60 	struct fsl_xhci *ctx = &fsl_xhci;
61 	int ret = 0;
62 
63 	ctx->hcd = (struct xhci_hccr *)ctr_addr[index];
64 	ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
65 
66 	ret = board_usb_init(index, USB_INIT_HOST);
67 	if (ret != 0) {
68 		puts("Failed to initialize board for USB\n");
69 		return ret;
70 	}
71 
72 	ret = fsl_xhci_core_init(ctx);
73 	if (ret < 0) {
74 		puts("Failed to initialize xhci\n");
75 		return ret;
76 	}
77 
78 	*hccr = (struct xhci_hccr *)ctx->hcd;
79 	*hcor = (struct xhci_hcor *)((uintptr_t) *hccr
80 				+ HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
81 
82 	debug("fsl-xhci: init hccr %lx and hcor %lx hc_length %lx\n",
83 	      (uintptr_t)*hccr, (uintptr_t)*hcor,
84 	      (uintptr_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
85 
86 	return ret;
87 }
88 
89 void xhci_hcd_stop(int index)
90 {
91 	struct fsl_xhci *ctx = &fsl_xhci;
92 
93 	fsl_xhci_core_exit(ctx);
94 }
95