1 /* 2 * Copyright 2015 Freescale Semiconductor, Inc. 3 * 4 * DWC3 controller driver 5 * 6 * Author: Ramneek Mehresh<ramneek.mehresh@freescale.com> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <dm.h> 13 #include <fdtdec.h> 14 #include <generic-phy.h> 15 #include <usb.h> 16 17 #include "xhci.h" 18 #include <asm/io.h> 19 #include <linux/usb/dwc3.h> 20 #include <linux/usb/otg.h> 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 struct xhci_dwc3_platdata { 25 struct phy usb_phy; 26 }; 27 28 void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) 29 { 30 clrsetbits_le32(&dwc3_reg->g_ctl, 31 DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG), 32 DWC3_GCTL_PRTCAPDIR(mode)); 33 } 34 35 static void dwc3_phy_reset(struct dwc3 *dwc3_reg) 36 { 37 /* Assert USB3 PHY reset */ 38 setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); 39 40 /* Assert USB2 PHY reset */ 41 setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); 42 43 mdelay(100); 44 45 /* Clear USB3 PHY reset */ 46 clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); 47 48 /* Clear USB2 PHY reset */ 49 clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); 50 } 51 52 void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) 53 { 54 /* Before Resetting PHY, put Core in Reset */ 55 setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); 56 57 /* reset USB3 phy - if required */ 58 dwc3_phy_reset(dwc3_reg); 59 60 mdelay(100); 61 62 /* After PHYs are stable we can take Core out of reset state */ 63 clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); 64 } 65 66 int dwc3_core_init(struct dwc3 *dwc3_reg) 67 { 68 u32 reg; 69 u32 revision; 70 unsigned int dwc3_hwparams1; 71 72 revision = readl(&dwc3_reg->g_snpsid); 73 /* This should read as U3 followed by revision number */ 74 if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) { 75 puts("this is not a DesignWare USB3 DRD Core\n"); 76 return -1; 77 } 78 79 dwc3_core_soft_reset(dwc3_reg); 80 81 dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1); 82 83 reg = readl(&dwc3_reg->g_ctl); 84 reg &= ~DWC3_GCTL_SCALEDOWN_MASK; 85 reg &= ~DWC3_GCTL_DISSCRAMBLE; 86 switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) { 87 case DWC3_GHWPARAMS1_EN_PWROPT_CLK: 88 reg &= ~DWC3_GCTL_DSBLCLKGTNG; 89 break; 90 default: 91 debug("No power optimization available\n"); 92 } 93 94 /* 95 * WORKAROUND: DWC3 revisions <1.90a have a bug 96 * where the device can fail to connect at SuperSpeed 97 * and falls back to high-speed mode which causes 98 * the device to enter a Connect/Disconnect loop 99 */ 100 if ((revision & DWC3_REVISION_MASK) < 0x190a) 101 reg |= DWC3_GCTL_U2RSTECN; 102 103 writel(reg, &dwc3_reg->g_ctl); 104 105 return 0; 106 } 107 108 void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val) 109 { 110 setbits_le32(&dwc3_reg->g_fladj, GFLADJ_30MHZ_REG_SEL | 111 GFLADJ_30MHZ(val)); 112 } 113 114 #ifdef CONFIG_DM_USB 115 static int xhci_dwc3_probe(struct udevice *dev) 116 { 117 struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); 118 struct xhci_hcor *hcor; 119 struct xhci_hccr *hccr; 120 struct dwc3 *dwc3_reg; 121 enum usb_dr_mode dr_mode; 122 int ret; 123 124 hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev)); 125 hcor = (struct xhci_hcor *)((uintptr_t)hccr + 126 HC_LENGTH(xhci_readl(&(hccr)->cr_capbase))); 127 128 ret = generic_phy_get_by_index(dev, 0, &plat->usb_phy); 129 if (ret) { 130 if (ret != -ENOENT) { 131 error("Failed to get USB PHY for %s\n", dev->name); 132 return ret; 133 } 134 } else { 135 ret = generic_phy_init(&plat->usb_phy); 136 if (ret) { 137 error("Can't init USB PHY for %s\n", dev->name); 138 return ret; 139 } 140 } 141 142 dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET); 143 144 dwc3_core_init(dwc3_reg); 145 146 dr_mode = usb_get_dr_mode(dev_of_offset(dev)); 147 if (dr_mode == USB_DR_MODE_UNKNOWN) 148 /* by default set dual role mode to HOST */ 149 dr_mode = USB_DR_MODE_HOST; 150 151 dwc3_set_mode(dwc3_reg, dr_mode); 152 153 return xhci_register(dev, hccr, hcor); 154 } 155 156 static int xhci_dwc3_remove(struct udevice *dev) 157 { 158 struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); 159 int ret; 160 161 if (generic_phy_valid(&plat->usb_phy)) { 162 ret = generic_phy_exit(&plat->usb_phy); 163 if (ret) { 164 error("Can't deinit USB PHY for %s\n", dev->name); 165 return ret; 166 } 167 } 168 169 return xhci_deregister(dev); 170 } 171 172 static const struct udevice_id xhci_dwc3_ids[] = { 173 { .compatible = "snps,dwc3" }, 174 { } 175 }; 176 177 U_BOOT_DRIVER(xhci_dwc3) = { 178 .name = "xhci-dwc3", 179 .id = UCLASS_USB, 180 .of_match = xhci_dwc3_ids, 181 .probe = xhci_dwc3_probe, 182 .remove = xhci_dwc3_remove, 183 .ops = &xhci_usb_ops, 184 .priv_auto_alloc_size = sizeof(struct xhci_ctrl), 185 .platdata_auto_alloc_size = sizeof(struct xhci_dwc3_platdata), 186 .flags = DM_FLAG_ALLOC_PRIV_DMA, 187 }; 188 #endif 189