1 /*
2  * (C) Copyright 2012
3  * eInfochips Ltd. <www.einfochips.com>
4  * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
5  *
6  * (C) Copyright 2009
7  * Marvell Semiconductor <www.marvell.com>
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #include <common.h>
13 #include <asm/io.h>
14 #include <usb.h>
15 #include <asm/arch/cpu.h>
16 #include <asm/arch/armada100.h>
17 #include <asm/arch/utmi-armada100.h>
18 
19 static int utmi_phy_init(void)
20 {
21 	struct armd1usb_phy_reg *phy_regs =
22 		(struct armd1usb_phy_reg *)UTMI_PHY_BASE;
23 	int timeout;
24 
25 	setbits_le32(&phy_regs->utmi_ctrl, INPKT_DELAY_SOF | PLL_PWR_UP);
26 	udelay(1000);
27 	setbits_le32(&phy_regs->utmi_ctrl, PHY_PWR_UP);
28 
29 	clrbits_le32(&phy_regs->utmi_pll, PLL_FBDIV_MASK | PLL_REFDIV_MASK);
30 	setbits_le32(&phy_regs->utmi_pll, N_DIVIDER << PLL_FBDIV | M_DIVIDER);
31 
32 	setbits_le32(&phy_regs->utmi_tx, PHSEL_VAL << CK60_PHSEL);
33 
34 	/* Calibrate pll */
35 	timeout = 10000;
36 	while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
37 		;
38 	if (!timeout)
39 		return -1;
40 
41 	udelay(200);
42 	setbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
43 	udelay(400);
44 	clrbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
45 
46 	udelay(200);
47 	setbits_le32(&phy_regs->utmi_tx, RCAL_START);
48 	udelay(400);
49 	clrbits_le32(&phy_regs->utmi_tx, RCAL_START);
50 
51 	timeout = 10000;
52 	while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
53 		;
54 	if (!timeout)
55 		return -1;
56 
57 	return 0;
58 }
59 
60 /*
61  * Initialize USB host controller's UTMI Physical interface
62  */
63 int utmi_init(void)
64 {
65 	struct armd1mpmu_registers *mpmu_regs =
66 		(struct armd1mpmu_registers *)ARMD1_MPMU_BASE;
67 
68 	struct armd1apmu_registers *apmu_regs =
69 		(struct armd1apmu_registers *)ARMD1_APMU_BASE;
70 
71 	/* Turn on 26Mhz ref clock for UTMI PLL */
72 	setbits_le32(&mpmu_regs->acgr, APB2_26M_EN | AP_26M);
73 
74 	/* USB Clock reset */
75 	writel(USB_SPH_AXICLK_EN, &apmu_regs->usbcrc);
76 	writel(USB_SPH_AXICLK_EN | USB_SPH_AXI_RST, &apmu_regs->usbcrc);
77 
78 	/* Initialize UTMI transceiver */
79 	return utmi_phy_init();
80 }
81