xref: /openbmc/u-boot/drivers/usb/host/r8a66597-hcd.c (revision 9d466f2f)
1 /*
2  * R8A66597 HCD (Host Controller Driver) for u-boot
3  *
4  * Copyright (C) 2008  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0
7  */
8 
9 #include <common.h>
10 #include <console.h>
11 #include <usb.h>
12 #include <asm/io.h>
13 #include <linux/iopoll.h>
14 
15 #include "r8a66597.h"
16 
17 #ifdef R8A66597_DEBUG
18 #define R8A66597_DPRINT		printf
19 #else
20 #define R8A66597_DPRINT(...)
21 #endif
22 
23 static struct r8a66597 gr8a66597;
24 
25 static void get_hub_data(struct usb_device *dev, u16 *hub_devnum, u16 *hubport)
26 {
27 	int i;
28 
29 	*hub_devnum = 0;
30 	*hubport = 0;
31 
32 	/* check a device connected to root_hub */
33 	if ((dev->parent && dev->parent->devnum == 1) ||
34 	    (dev->devnum == 1))
35 		return;
36 
37 	for (i = 0; i < USB_MAXCHILDREN; i++) {
38 		if (dev->parent->children[i] == dev) {
39 			*hub_devnum = (u8)dev->parent->devnum;
40 			*hubport = i;
41 			return;
42 		}
43 	}
44 
45 	printf("get_hub_data error.\n");
46 }
47 
48 static void set_devadd(struct r8a66597 *r8a66597, u8 r8a66597_address,
49 			struct usb_device *dev, int port)
50 {
51 	u16 val, usbspd, upphub, hubport;
52 	unsigned long devadd_reg = get_devadd_addr(r8a66597_address);
53 
54 	get_hub_data(dev, &upphub, &hubport);
55 	usbspd = r8a66597->speed;
56 	val = (upphub << 11) | (hubport << 8) | (usbspd << 6) | (port & 0x0001);
57 	r8a66597_write(r8a66597, val, devadd_reg);
58 }
59 
60 static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
61 {
62 	u16 tmp;
63 	int i = 0;
64 
65 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
66 	do {
67 		r8a66597_write(r8a66597, SCKE, SYSCFG0);
68 		tmp = r8a66597_read(r8a66597, SYSCFG0);
69 		if (i++ > 1000) {
70 			printf("register access fail.\n");
71 			return -1;
72 		}
73 	} while ((tmp & SCKE) != SCKE);
74 	r8a66597_write(r8a66597, 0x04, 0x02);
75 #else
76 	do {
77 		r8a66597_write(r8a66597, USBE, SYSCFG0);
78 		tmp = r8a66597_read(r8a66597, SYSCFG0);
79 		if (i++ > 1000) {
80 			printf("register access fail.\n");
81 			return -1;
82 		}
83 	} while ((tmp & USBE) != USBE);
84 	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
85 #if !defined(CONFIG_RZA_USB)
86 	r8a66597_mdfy(r8a66597, CONFIG_R8A66597_XTAL, XTAL, SYSCFG0);
87 
88 	i = 0;
89 	r8a66597_bset(r8a66597, XCKE, SYSCFG0);
90 	do {
91 		udelay(1000);
92 		tmp = r8a66597_read(r8a66597, SYSCFG0);
93 		if (i++ > 500) {
94 			printf("register access fail.\n");
95 			return -1;
96 		}
97 	} while ((tmp & SCKE) != SCKE);
98 #else
99 	/*
100 	 * RZ/A Only:
101 	 * Bits XTAL(UCKSEL) and UPLLE in SYSCFG0 for USB0 controls both USB0
102 	 * and USB1, so we must always set the USB0 register
103 	 */
104 #if (CONFIG_R8A66597_XTAL == 1)
105 	setbits(le16, R8A66597_BASE0, XTAL);
106 #endif
107 	mdelay(1);
108 	setbits(le16, R8A66597_BASE0, UPLLE);
109 	mdelay(1);
110 	r8a66597_bset(r8a66597, SUSPM, SUSPMODE0);
111 #endif /* CONFIG_RZA_USB */
112 #endif	/* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
113 
114 	return 0;
115 }
116 
117 static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
118 {
119 #if !defined(CONFIG_RZA_USB)
120 	r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
121 	udelay(1);
122 #if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
123 	r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
124 	r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
125 	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
126 #endif
127 #else
128 	r8a66597_bclr(r8a66597, SUSPM, SUSPMODE0);
129 
130 	clrbits(le16, R8A66597_BASE0, UPLLE);
131 	mdelay(1);
132 	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
133 	mdelay(1);
134 
135 #endif
136 }
137 
138 static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
139 {
140 	u16 val;
141 
142 	val = port ? DRPD : DCFM | DRPD;
143 	r8a66597_bset(r8a66597, val, get_syscfg_reg(port));
144 	r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
145 
146 #if !defined(CONFIG_RZA_USB)
147 	r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, get_dmacfg_reg(port));
148 #endif
149 }
150 
151 static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
152 {
153 	u16 val, tmp;
154 
155 	r8a66597_write(r8a66597, 0, get_intenb_reg(port));
156 	r8a66597_write(r8a66597, 0, get_intsts_reg(port));
157 
158 	r8a66597_port_power(r8a66597, port, 0);
159 
160 	do {
161 		tmp = r8a66597_read(r8a66597, SOFCFG) & EDGESTS;
162 		udelay(640);
163 	} while (tmp == EDGESTS);
164 
165 	val = port ? DRPD : DCFM | DRPD;
166 	r8a66597_bclr(r8a66597, val, get_syscfg_reg(port));
167 	r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port));
168 }
169 
170 static int enable_controller(struct r8a66597 *r8a66597)
171 {
172 	int ret, port;
173 
174 	ret = r8a66597_clock_enable(r8a66597);
175 	if (ret < 0)
176 		return ret;
177 
178 #if !defined(CONFIG_RZA_USB)
179 	r8a66597_bset(r8a66597, CONFIG_R8A66597_LDRV & LDRV, PINCFG);
180 #endif
181 	r8a66597_bset(r8a66597, USBE, SYSCFG0);
182 
183 	r8a66597_bset(r8a66597, INTL, SOFCFG);
184 	r8a66597_write(r8a66597, 0, INTENB0);
185 	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
186 		r8a66597_write(r8a66597, 0, get_intenb_reg(port));
187 
188 	r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, CFIFOSEL);
189 	r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, D0FIFOSEL);
190 	r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, D1FIFOSEL);
191 	r8a66597_bset(r8a66597, TRNENSEL, SOFCFG);
192 
193 	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
194 		r8a66597_enable_port(r8a66597, port);
195 
196 	return 0;
197 }
198 
199 static void disable_controller(struct r8a66597 *r8a66597)
200 {
201 	int i;
202 
203 	if (!(r8a66597_read(r8a66597, SYSCFG0) & USBE))
204 		return;
205 
206 	r8a66597_write(r8a66597, 0, INTENB0);
207 	r8a66597_write(r8a66597, 0, INTSTS0);
208 
209 	r8a66597_write(r8a66597, 0, D0FIFOSEL);
210 	r8a66597_write(r8a66597, 0, D1FIFOSEL);
211 	r8a66597_write(r8a66597, 0, DCPCFG);
212 	r8a66597_write(r8a66597, 0x40, DCPMAXP);
213 	r8a66597_write(r8a66597, 0, DCPCTR);
214 
215 	for (i = 0; i <= 10; i++)
216 		r8a66597_write(r8a66597, 0, get_devadd_addr(i));
217 	for (i = 1; i <= 5; i++) {
218 		r8a66597_write(r8a66597, 0, get_pipetre_addr(i));
219 		r8a66597_write(r8a66597, 0, get_pipetrn_addr(i));
220 	}
221 	for (i = 1; i < R8A66597_MAX_NUM_PIPE; i++) {
222 		r8a66597_write(r8a66597, 0, get_pipectr_addr(i));
223 		r8a66597_write(r8a66597, i, PIPESEL);
224 		r8a66597_write(r8a66597, 0, PIPECFG);
225 		r8a66597_write(r8a66597, 0, PIPEBUF);
226 		r8a66597_write(r8a66597, 0, PIPEMAXP);
227 		r8a66597_write(r8a66597, 0, PIPEPERI);
228 	}
229 
230 	for (i = 0; i < R8A66597_MAX_ROOT_HUB; i++)
231 		r8a66597_disable_port(r8a66597, i);
232 
233 	r8a66597_clock_disable(r8a66597);
234 }
235 
236 static void r8a66597_reg_wait(struct r8a66597 *r8a66597, unsigned long reg,
237 			      u16 mask, u16 loop)
238 {
239 	u16 tmp;
240 	int i = 0;
241 
242 	do {
243 		tmp = r8a66597_read(r8a66597, reg);
244 		if (i++ > 1000000) {
245 			printf("register%lx, loop %x is timeout\n", reg, loop);
246 			break;
247 		}
248 	} while ((tmp & mask) != loop);
249 }
250 
251 static void pipe_buffer_setting(struct r8a66597 *r8a66597,
252 				struct usb_device *dev, unsigned long pipe)
253 {
254 	u16 val = 0;
255 	u16 pipenum, bufnum, maxpacket;
256 
257 	if (usb_pipein(pipe)) {
258 		pipenum = BULK_IN_PIPENUM;
259 		bufnum = BULK_IN_BUFNUM;
260 		maxpacket = dev->epmaxpacketin[usb_pipeendpoint(pipe)];
261 	} else {
262 		pipenum = BULK_OUT_PIPENUM;
263 		bufnum = BULK_OUT_BUFNUM;
264 		maxpacket = dev->epmaxpacketout[usb_pipeendpoint(pipe)];
265 	}
266 
267 	if (r8a66597->pipe_config & (1 << pipenum))
268 		return;
269 	r8a66597->pipe_config |= (1 << pipenum);
270 
271 	r8a66597_bset(r8a66597, ACLRM, get_pipectr_addr(pipenum));
272 	r8a66597_bclr(r8a66597, ACLRM, get_pipectr_addr(pipenum));
273 	r8a66597_write(r8a66597, pipenum, PIPESEL);
274 
275 	/* FIXME: This driver support bulk transfer only. */
276 	if (!usb_pipein(pipe))
277 		val |= R8A66597_DIR;
278 	else
279 		val |= R8A66597_SHTNAK;
280 	val |= R8A66597_BULK | R8A66597_DBLB | usb_pipeendpoint(pipe);
281 	r8a66597_write(r8a66597, val, PIPECFG);
282 
283 	r8a66597_write(r8a66597, (8 << 10) | bufnum, PIPEBUF);
284 	r8a66597_write(r8a66597, make_devsel(usb_pipedevice(pipe)) |
285 				 maxpacket, PIPEMAXP);
286 	r8a66597_write(r8a66597, 0, PIPEPERI);
287 	r8a66597_write(r8a66597, SQCLR, get_pipectr_addr(pipenum));
288 }
289 
290 static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
291 			     struct devrequest *setup)
292 {
293 	int i;
294 	unsigned short *p = (unsigned short *)setup;
295 	unsigned long setup_addr = USBREQ;
296 	u16 intsts1;
297 	int timeout = 3000;
298 #if defined(CONFIG_RZA_USB)
299 	u16 dcpctr;
300 #endif
301 	u16 devsel = setup->request == USB_REQ_SET_ADDRESS ? 0 : dev->devnum;
302 
303 	r8a66597_write(r8a66597, make_devsel(devsel) |
304 				 (8 << dev->maxpacketsize), DCPMAXP);
305 	r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
306 
307 #if defined(CONFIG_RZA_USB)
308 	dcpctr = r8a66597_read(r8a66597, DCPCTR);
309 	if ((dcpctr & PID) == PID_BUF) {
310 		if (readw_poll_timeout(r8a66597->reg + DCPCTR, dcpctr,
311 				       dcpctr & BSTS, 1000) < 0) {
312 			printf("DCPCTR BSTS timeout!\n");
313 			return -ETIMEDOUT;
314 		}
315 	}
316 #endif
317 
318 	for (i = 0; i < 4; i++) {
319 		r8a66597_write(r8a66597, le16_to_cpu(p[i]), setup_addr);
320 		setup_addr += 2;
321 	}
322 	r8a66597_write(r8a66597, ~0x0001, BRDYSTS);
323 	r8a66597_write(r8a66597, SUREQ, DCPCTR);
324 
325 	while (1) {
326 		intsts1 = r8a66597_read(r8a66597, INTSTS1);
327 		if (intsts1 & SACK)
328 			break;
329 		if (intsts1 & SIGN) {
330 			printf("setup packet send error\n");
331 			return -1;
332 		}
333 		if (timeout-- < 0) {
334 			printf("setup packet timeout\n");
335 			return -1;
336 		}
337 		udelay(500);
338 	}
339 
340 	return 0;
341 }
342 
343 static int send_bulk_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
344 			    unsigned long pipe, void *buffer, int transfer_len)
345 {
346 	u16 tmp, bufsize;
347 	u16 *buf;
348 	size_t size;
349 
350 	R8A66597_DPRINT("%s\n", __func__);
351 
352 	r8a66597_mdfy(r8a66597, MBW | BULK_OUT_PIPENUM,
353 			MBW | CURPIPE, CFIFOSEL);
354 	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, BULK_OUT_PIPENUM);
355 	tmp = r8a66597_read(r8a66597, CFIFOCTR);
356 	if ((tmp & FRDY) == 0) {
357 		printf("%s FRDY is not set (%x)\n", __func__, tmp);
358 		return -1;
359 	}
360 
361 	/* prepare parameters */
362 	bufsize = dev->epmaxpacketout[usb_pipeendpoint(pipe)];
363 	buf = (u16 *)(buffer + dev->act_len);
364 	size = min((int)bufsize, transfer_len - dev->act_len);
365 
366 	/* write fifo */
367 	r8a66597_write(r8a66597, ~(1 << BULK_OUT_PIPENUM), BEMPSTS);
368 	if (buffer) {
369 		r8a66597_write_fifo(r8a66597, CFIFO, buf, size);
370 		r8a66597_write(r8a66597, BVAL, CFIFOCTR);
371 	}
372 
373 	/* update parameters */
374 	dev->act_len += size;
375 
376 	r8a66597_mdfy(r8a66597, PID_BUF, PID,
377 			get_pipectr_addr(BULK_OUT_PIPENUM));
378 
379 	while (!(r8a66597_read(r8a66597, BEMPSTS) & (1 << BULK_OUT_PIPENUM)))
380 		if (ctrlc())
381 			return -1;
382 	r8a66597_write(r8a66597, ~(1 << BULK_OUT_PIPENUM), BEMPSTS);
383 
384 	if (dev->act_len >= transfer_len)
385 		r8a66597_mdfy(r8a66597, PID_NAK, PID,
386 				get_pipectr_addr(BULK_OUT_PIPENUM));
387 
388 	return 0;
389 }
390 
391 static int receive_bulk_packet(struct r8a66597 *r8a66597,
392 			       struct usb_device *dev,
393 			       unsigned long pipe,
394 			       void *buffer, int transfer_len)
395 {
396 	u16 tmp;
397 	u16 *buf;
398 	const u16 pipenum = BULK_IN_PIPENUM;
399 	int rcv_len;
400 	int maxpacket = dev->epmaxpacketin[usb_pipeendpoint(pipe)];
401 
402 	R8A66597_DPRINT("%s\n", __func__);
403 
404 	/* prepare */
405 	if (dev->act_len == 0) {
406 		r8a66597_mdfy(r8a66597, PID_NAK, PID,
407 				get_pipectr_addr(pipenum));
408 		r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
409 
410 		r8a66597_write(r8a66597, TRCLR, get_pipetre_addr(pipenum));
411 		r8a66597_write(r8a66597,
412 				(transfer_len + maxpacket - 1) / maxpacket,
413 				get_pipetrn_addr(pipenum));
414 		r8a66597_bset(r8a66597, TRENB, get_pipetre_addr(pipenum));
415 
416 		r8a66597_mdfy(r8a66597, PID_BUF, PID,
417 				get_pipectr_addr(pipenum));
418 	}
419 
420 	r8a66597_mdfy(r8a66597, MBW | pipenum, MBW | CURPIPE, CFIFOSEL);
421 	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, pipenum);
422 
423 	while (!(r8a66597_read(r8a66597, BRDYSTS) & (1 << pipenum)))
424 		if (ctrlc())
425 			return -1;
426 	r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
427 
428 	tmp = r8a66597_read(r8a66597, CFIFOCTR);
429 	if ((tmp & FRDY) == 0) {
430 		printf("%s FRDY is not set. (%x)\n", __func__, tmp);
431 		return -1;
432 	}
433 
434 	buf = (u16 *)(buffer + dev->act_len);
435 	rcv_len = tmp & DTLN;
436 	dev->act_len += rcv_len;
437 
438 	if (buffer) {
439 		if (rcv_len == 0)
440 			r8a66597_write(r8a66597, BCLR, CFIFOCTR);
441 		else
442 			r8a66597_read_fifo(r8a66597, CFIFO, buf, rcv_len);
443 	}
444 
445 	return 0;
446 }
447 
448 static int receive_control_packet(struct r8a66597 *r8a66597,
449 				  struct usb_device *dev,
450 				  void *buffer, int transfer_len)
451 {
452 	u16 tmp;
453 	int rcv_len;
454 
455 	/* FIXME: limit transfer size : 64byte or less */
456 
457 	r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
458 	r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
459 	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
460 	r8a66597_bset(r8a66597, SQSET, DCPCTR);
461 	r8a66597_write(r8a66597, BCLR, CFIFOCTR);
462 	r8a66597_mdfy(r8a66597, PID_BUF, PID, DCPCTR);
463 
464 	while (!(r8a66597_read(r8a66597, BRDYSTS) & 0x0001))
465 		if (ctrlc())
466 			return -1;
467 	r8a66597_write(r8a66597, ~0x0001, BRDYSTS);
468 
469 	r8a66597_mdfy(r8a66597, MBW, MBW | CURPIPE, CFIFOSEL);
470 	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
471 
472 	tmp = r8a66597_read(r8a66597, CFIFOCTR);
473 	if ((tmp & FRDY) == 0) {
474 		printf("%s FRDY is not set. (%x)\n", __func__, tmp);
475 		return -1;
476 	}
477 
478 	rcv_len = tmp & DTLN;
479 	dev->act_len += rcv_len;
480 
481 	r8a66597_mdfy(r8a66597, PID_NAK, PID, DCPCTR);
482 
483 	if (buffer) {
484 		if (rcv_len == 0)
485 			r8a66597_write(r8a66597, BCLR, DCPCTR);
486 		else
487 			r8a66597_read_fifo(r8a66597, CFIFO, buffer, rcv_len);
488 	}
489 
490 	return 0;
491 }
492 
493 static int send_status_packet(struct r8a66597 *r8a66597,
494 			       unsigned long pipe)
495 {
496 	r8a66597_bset(r8a66597, SQSET, DCPCTR);
497 	r8a66597_mdfy(r8a66597, PID_NAK, PID, DCPCTR);
498 
499 	if (usb_pipein(pipe)) {
500 		r8a66597_bset(r8a66597, R8A66597_DIR, DCPCFG);
501 		r8a66597_mdfy(r8a66597, ISEL, ISEL | CURPIPE, CFIFOSEL);
502 		r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
503 		r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
504 		r8a66597_write(r8a66597, BCLR | BVAL, CFIFOCTR);
505 	} else {
506 		r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
507 		r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
508 		r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
509 		r8a66597_write(r8a66597, BCLR, CFIFOCTR);
510 	}
511 	r8a66597_mdfy(r8a66597, PID_BUF, PID, DCPCTR);
512 
513 	while (!(r8a66597_read(r8a66597, BEMPSTS) & 0x0001))
514 		if (ctrlc())
515 			return -1;
516 
517 	return 0;
518 }
519 
520 static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port)
521 {
522 	int count = R8A66597_MAX_SAMPLING;
523 	unsigned short syssts, old_syssts;
524 
525 	R8A66597_DPRINT("%s\n", __func__);
526 
527 	old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port) & LNST);
528 	while (count > 0) {
529 		mdelay(R8A66597_RH_POLL_TIME);
530 
531 		syssts = r8a66597_read(r8a66597, get_syssts_reg(port) & LNST);
532 		if (syssts == old_syssts) {
533 			count--;
534 		} else {
535 			count = R8A66597_MAX_SAMPLING;
536 			old_syssts = syssts;
537 		}
538 	}
539 }
540 
541 static void r8a66597_bus_reset(struct r8a66597 *r8a66597, int port)
542 {
543 	mdelay(10);
544 	r8a66597_mdfy(r8a66597, USBRST, USBRST | UACT, get_dvstctr_reg(port));
545 	mdelay(50);
546 	r8a66597_mdfy(r8a66597, UACT, USBRST | UACT, get_dvstctr_reg(port));
547 	mdelay(50);
548 }
549 
550 static int check_usb_device_connecting(struct r8a66597 *r8a66597)
551 {
552 	int timeout = 10000;	/* 100usec * 10000 = 1sec */
553 	int i;
554 
555 	for (i = 0; i < 5; i++) {
556 		/* check a usb cable connect */
557 		while (!(r8a66597_read(r8a66597, INTSTS1) & ATTCH)) {
558 			if (timeout-- < 0) {
559 				printf("%s timeout.\n", __func__);
560 				return -1;
561 			}
562 			udelay(100);
563 		}
564 
565 		/* check a data line */
566 		r8a66597_check_syssts(r8a66597, 0);
567 
568 		r8a66597_bus_reset(r8a66597, 0);
569 		r8a66597->speed = get_rh_usb_speed(r8a66597, 0);
570 
571 		if (!(r8a66597_read(r8a66597, INTSTS1) & DTCH)) {
572 			r8a66597->port_change = USB_PORT_STAT_C_CONNECTION;
573 			r8a66597->port_status = USB_PORT_STAT_CONNECTION |
574 						USB_PORT_STAT_ENABLE;
575 			return 0;	/* success */
576 		}
577 
578 		R8A66597_DPRINT("USB device has detached. retry = %d\n", i);
579 		r8a66597_write(r8a66597, ~DTCH, INTSTS1);
580 	}
581 
582 	return -1;	/* fail */
583 }
584 
585 /*-------------------------------------------------------------------------*
586  * Virtual Root Hub
587  *-------------------------------------------------------------------------*/
588 
589 #include <usbroothubdes.h>
590 
591 static int r8a66597_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
592 			void *buffer, int transfer_len, struct devrequest *cmd)
593 {
594 	struct r8a66597 *r8a66597 = &gr8a66597;
595 	int leni = transfer_len;
596 	int len = 0;
597 	int stat = 0;
598 	__u16 bmRType_bReq;
599 	__u16 wValue;
600 	__u16 wLength;
601 	unsigned char data[32];
602 
603 	R8A66597_DPRINT("%s\n", __func__);
604 
605 	if (usb_pipeint(pipe)) {
606 		printf("Root-Hub submit IRQ: NOT implemented");
607 		return 0;
608 	}
609 
610 	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
611 	wValue	      = cpu_to_le16 (cmd->value);
612 	wLength	      = cpu_to_le16 (cmd->length);
613 
614 	switch (bmRType_bReq) {
615 	case RH_GET_STATUS:
616 		*(__u16 *)buffer = cpu_to_le16(1);
617 		len = 2;
618 		break;
619 	case RH_GET_STATUS | RH_INTERFACE:
620 		*(__u16 *)buffer = cpu_to_le16(0);
621 		len = 2;
622 		break;
623 	case RH_GET_STATUS | RH_ENDPOINT:
624 		*(__u16 *)buffer = cpu_to_le16(0);
625 		len = 2;
626 		break;
627 	case RH_GET_STATUS | RH_CLASS:
628 		*(__u32 *)buffer = cpu_to_le32(0);
629 		len = 4;
630 		break;
631 	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
632 		*(__u32 *)buffer = cpu_to_le32(r8a66597->port_status |
633 						(r8a66597->port_change << 16));
634 		len = 4;
635 		break;
636 	case RH_CLEAR_FEATURE | RH_ENDPOINT:
637 	case RH_CLEAR_FEATURE | RH_CLASS:
638 		break;
639 
640 	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
641 		switch (wValue) {
642 		case RH_C_PORT_CONNECTION:
643 			r8a66597->port_change &= ~USB_PORT_STAT_C_CONNECTION;
644 			break;
645 		}
646 		break;
647 
648 	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
649 		switch (wValue) {
650 		case (RH_PORT_SUSPEND):
651 			break;
652 		case (RH_PORT_RESET):
653 			r8a66597_bus_reset(r8a66597, 0);
654 			break;
655 		case (RH_PORT_POWER):
656 			break;
657 		case (RH_PORT_ENABLE):
658 			break;
659 		}
660 		break;
661 	case RH_SET_ADDRESS:
662 		gr8a66597.rh_devnum = wValue;
663 		break;
664 	case RH_GET_DESCRIPTOR:
665 		switch ((wValue & 0xff00) >> 8) {
666 		case (0x01): /* device descriptor */
667 			len = min_t(unsigned int,
668 				  leni,
669 				  min_t(unsigned int,
670 				      sizeof(root_hub_dev_des),
671 				      wLength));
672 			memcpy(buffer, root_hub_dev_des, len);
673 			break;
674 		case (0x02): /* configuration descriptor */
675 			len = min_t(unsigned int,
676 				  leni,
677 				  min_t(unsigned int,
678 				      sizeof(root_hub_config_des),
679 				      wLength));
680 			memcpy(buffer, root_hub_config_des, len);
681 			break;
682 		case (0x03): /* string descriptors */
683 			if (wValue == 0x0300) {
684 				len = min_t(unsigned int,
685 					  leni,
686 					  min_t(unsigned int,
687 					      sizeof(root_hub_str_index0),
688 					      wLength));
689 				memcpy(buffer, root_hub_str_index0, len);
690 			}
691 			if (wValue == 0x0301) {
692 				len = min_t(unsigned int,
693 					  leni,
694 					  min_t(unsigned int,
695 					      sizeof(root_hub_str_index1),
696 					      wLength));
697 				memcpy(buffer, root_hub_str_index1, len);
698 			}
699 			break;
700 		default:
701 			stat = USB_ST_STALLED;
702 		}
703 		break;
704 
705 	case RH_GET_DESCRIPTOR | RH_CLASS:
706 	{
707 		__u32 temp = 0x00000001;
708 
709 		data[0] = 9;		/* min length; */
710 		data[1] = 0x29;
711 		data[2] = temp & RH_A_NDP;
712 		data[3] = 0;
713 		if (temp & RH_A_PSM)
714 			data[3] |= 0x1;
715 		if (temp & RH_A_NOCP)
716 			data[3] |= 0x10;
717 		else if (temp & RH_A_OCPM)
718 			data[3] |= 0x8;
719 
720 		/* corresponds to data[4-7] */
721 		data[5] = (temp & RH_A_POTPGT) >> 24;
722 		data[7] = temp & RH_B_DR;
723 		if (data[2] < 7) {
724 			data[8] = 0xff;
725 		} else {
726 			data[0] += 2;
727 			data[8] = (temp & RH_B_DR) >> 8;
728 			data[10] = data[9] = 0xff;
729 		}
730 
731 		len = min_t(unsigned int, leni,
732 			    min_t(unsigned int, data[0], wLength));
733 		memcpy(buffer, data, len);
734 		break;
735 	}
736 
737 	case RH_GET_CONFIGURATION:
738 		*(__u8 *) buffer = 0x01;
739 		len = 1;
740 		break;
741 	case RH_SET_CONFIGURATION:
742 		break;
743 	default:
744 		R8A66597_DPRINT("unsupported root hub command");
745 		stat = USB_ST_STALLED;
746 	}
747 
748 	mdelay(1);
749 
750 	len = min_t(int, len, leni);
751 
752 	dev->act_len = len;
753 	dev->status = stat;
754 
755 	return stat;
756 }
757 
758 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
759 		    int transfer_len)
760 {
761 	struct r8a66597 *r8a66597 = &gr8a66597;
762 	int ret = 0;
763 
764 	R8A66597_DPRINT("%s\n", __func__);
765 	R8A66597_DPRINT("pipe = %08x, buffer = %p, len = %d, devnum = %d\n",
766 			pipe, buffer, transfer_len, dev->devnum);
767 
768 	set_devadd(r8a66597, dev->devnum, dev, 0);
769 
770 	pipe_buffer_setting(r8a66597, dev, pipe);
771 
772 	dev->act_len = 0;
773 	while (dev->act_len < transfer_len && ret == 0) {
774 		if (ctrlc())
775 			return -1;
776 
777 		if (usb_pipein(pipe))
778 			ret = receive_bulk_packet(r8a66597, dev, pipe, buffer,
779 							transfer_len);
780 		else
781 			ret = send_bulk_packet(r8a66597, dev, pipe, buffer,
782 							transfer_len);
783 	}
784 
785 	if (ret == 0)
786 		dev->status = 0;
787 
788 	return ret;
789 }
790 
791 int submit_control_msg(struct usb_device *dev, unsigned long pipe,
792 		       void *buffer, int transfer_len, struct devrequest *setup)
793 {
794 	struct r8a66597 *r8a66597 = &gr8a66597;
795 	u16 r8a66597_address = setup->request == USB_REQ_SET_ADDRESS ?
796 					0 : dev->devnum;
797 
798 	R8A66597_DPRINT("%s\n", __func__);
799 	if (usb_pipedevice(pipe) == r8a66597->rh_devnum)
800 		return r8a66597_submit_rh_msg(dev, pipe, buffer, transfer_len,
801 						setup);
802 
803 	R8A66597_DPRINT("%s: setup\n", __func__);
804 	set_devadd(r8a66597, r8a66597_address, dev, 0);
805 
806 	if (send_setup_packet(r8a66597, dev, setup) < 0) {
807 		printf("setup packet send error\n");
808 		return -1;
809 	}
810 
811 	dev->act_len = 0;
812 	if (usb_pipein(pipe))
813 		if (receive_control_packet(r8a66597, dev, buffer,
814 						transfer_len) < 0)
815 			return -1;
816 
817 	if (send_status_packet(r8a66597, pipe) < 0)
818 		return -1;
819 
820 	dev->status = 0;
821 
822 	return 0;
823 }
824 
825 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
826 			int transfer_len, int interval)
827 {
828 	/* no implement */
829 	R8A66597_DPRINT("%s\n", __func__);
830 	return 0;
831 }
832 
833 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
834 {
835 	struct r8a66597 *r8a66597 = &gr8a66597;
836 
837 	R8A66597_DPRINT("%s\n", __func__);
838 
839 	memset(r8a66597, 0, sizeof(*r8a66597));
840 	r8a66597->reg = CONFIG_R8A66597_BASE_ADDR;
841 
842 	disable_controller(r8a66597);
843 	mdelay(100);
844 
845 	enable_controller(r8a66597);
846 	r8a66597_port_power(r8a66597, 0 , 1);
847 
848 	/* check usb device */
849 	check_usb_device_connecting(r8a66597);
850 
851 	mdelay(50);
852 
853 	return 0;
854 }
855 
856 int usb_lowlevel_stop(int index)
857 {
858 	disable_controller(&gr8a66597);
859 
860 	return 0;
861 }
862