1 /* 2 * URB OHCI HCD (Host Controller Driver) for USB. 3 * 4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 5 * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net> 6 * 7 * usb-ohci.h 8 */ 9 10 /* 11 * e.g. PCI controllers need this 12 */ 13 #ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS 14 # define ohci_readl(a) __swap_32(*((volatile u32 *)(a))) 15 # define ohci_writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a)) 16 #else 17 # define ohci_readl(a) (*((volatile u32 *)(a))) 18 # define ohci_writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a)) 19 #endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */ 20 21 #if ARCH_DMA_MINALIGN > 16 22 #define ED_ALIGNMENT ARCH_DMA_MINALIGN 23 #else 24 #define ED_ALIGNMENT 16 25 #endif 26 27 #if defined CONFIG_DM_USB && ARCH_DMA_MINALIGN > 32 28 #define TD_ALIGNMENT ARCH_DMA_MINALIGN 29 #else 30 #define TD_ALIGNMENT 32 31 #endif 32 33 /* functions for doing board or CPU specific setup/cleanup */ 34 int usb_board_stop(void); 35 36 int usb_cpu_init(void); 37 int usb_cpu_stop(void); 38 int usb_cpu_init_fail(void); 39 40 /* ED States */ 41 #define ED_NEW 0x00 42 #define ED_UNLINK 0x01 43 #define ED_OPER 0x02 44 #define ED_DEL 0x04 45 #define ED_URB_DEL 0x08 46 47 /* usb_ohci_ed */ 48 struct ed { 49 __u32 hwINFO; 50 __u32 hwTailP; 51 __u32 hwHeadP; 52 __u32 hwNextED; 53 54 struct ed *ed_prev; 55 __u8 int_period; 56 __u8 int_branch; 57 __u8 int_load; 58 __u8 int_interval; 59 __u8 state; 60 __u8 type; 61 __u16 last_iso; 62 struct ed *ed_rm_list; 63 64 struct usb_device *usb_dev; 65 void *purb; 66 __u32 unused[2]; 67 } __attribute__((aligned(ED_ALIGNMENT))); 68 typedef struct ed ed_t; 69 70 71 /* TD info field */ 72 #define TD_CC 0xf0000000 73 #define TD_CC_GET(td_p) ((td_p >>28) & 0x0f) 74 #define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28) 75 #define TD_EC 0x0C000000 76 #define TD_T 0x03000000 77 #define TD_T_DATA0 0x02000000 78 #define TD_T_DATA1 0x03000000 79 #define TD_T_TOGGLE 0x00000000 80 #define TD_R 0x00040000 81 #define TD_DI 0x00E00000 82 #define TD_DI_SET(X) (((X) & 0x07)<< 21) 83 #define TD_DP 0x00180000 84 #define TD_DP_SETUP 0x00000000 85 #define TD_DP_IN 0x00100000 86 #define TD_DP_OUT 0x00080000 87 88 #define TD_ISO 0x00010000 89 #define TD_DEL 0x00020000 90 91 /* CC Codes */ 92 #define TD_CC_NOERROR 0x00 93 #define TD_CC_CRC 0x01 94 #define TD_CC_BITSTUFFING 0x02 95 #define TD_CC_DATATOGGLEM 0x03 96 #define TD_CC_STALL 0x04 97 #define TD_DEVNOTRESP 0x05 98 #define TD_PIDCHECKFAIL 0x06 99 #define TD_UNEXPECTEDPID 0x07 100 #define TD_DATAOVERRUN 0x08 101 #define TD_DATAUNDERRUN 0x09 102 #define TD_BUFFEROVERRUN 0x0C 103 #define TD_BUFFERUNDERRUN 0x0D 104 #define TD_NOTACCESSED 0x0F 105 106 107 #define MAXPSW 1 108 109 struct td { 110 __u32 hwINFO; 111 __u32 hwCBP; /* Current Buffer Pointer */ 112 __u32 hwNextTD; /* Next TD Pointer */ 113 __u32 hwBE; /* Memory Buffer End Pointer */ 114 115 /* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */ 116 __u16 hwPSW[MAXPSW]; 117 /* #endif */ 118 __u8 unused; 119 __u8 index; 120 struct ed *ed; 121 struct td *next_dl_td; 122 struct usb_device *usb_dev; 123 int transfer_len; 124 __u32 data; 125 126 __u32 unused2[2]; 127 } __attribute__((aligned(TD_ALIGNMENT))); 128 typedef struct td td_t; 129 130 #define OHCI_ED_SKIP (1 << 14) 131 132 /* 133 * The HCCA (Host Controller Communications Area) is a 256 byte 134 * structure defined in the OHCI spec. that the host controller is 135 * told the base address of. It must be 256-byte aligned. 136 */ 137 138 #define NUM_INTS 32 /* part of the OHCI standard */ 139 struct ohci_hcca { 140 __u32 int_table[NUM_INTS]; /* Interrupt ED table */ 141 #if defined(CONFIG_MPC5200) 142 __u16 pad1; /* set to 0 on each frame_no change */ 143 __u16 frame_no; /* current frame number */ 144 #else 145 __u16 frame_no; /* current frame number */ 146 __u16 pad1; /* set to 0 on each frame_no change */ 147 #endif 148 __u32 done_head; /* info returned for an interrupt */ 149 u8 reserved_for_hc[116]; 150 } __attribute__((aligned(256))); 151 152 153 /* 154 * Maximum number of root hub ports. 155 */ 156 #ifndef CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 157 # error "CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS undefined!" 158 #endif 159 160 /* 161 * This is the structure of the OHCI controller's memory mapped I/O 162 * region. This is Memory Mapped I/O. You must use the ohci_readl() and 163 * ohci_writel() macros defined in this file to access these!! 164 */ 165 struct ohci_regs { 166 /* control and status registers */ 167 __u32 revision; 168 __u32 control; 169 __u32 cmdstatus; 170 __u32 intrstatus; 171 __u32 intrenable; 172 __u32 intrdisable; 173 /* memory pointers */ 174 __u32 hcca; 175 __u32 ed_periodcurrent; 176 __u32 ed_controlhead; 177 __u32 ed_controlcurrent; 178 __u32 ed_bulkhead; 179 __u32 ed_bulkcurrent; 180 __u32 donehead; 181 /* frame counters */ 182 __u32 fminterval; 183 __u32 fmremaining; 184 __u32 fmnumber; 185 __u32 periodicstart; 186 __u32 lsthresh; 187 /* Root hub ports */ 188 struct ohci_roothub_regs { 189 __u32 a; 190 __u32 b; 191 __u32 status; 192 __u32 portstatus[CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS]; 193 } roothub; 194 } __attribute__((aligned(32))); 195 196 /* Some EHCI controls */ 197 #define EHCI_USBCMD_OFF 0x20 198 #define EHCI_USBCMD_HCRESET (1 << 1) 199 200 /* OHCI CONTROL AND STATUS REGISTER MASKS */ 201 202 /* 203 * HcControl (control) register masks 204 */ 205 #define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */ 206 #define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */ 207 #define OHCI_CTRL_IE (1 << 3) /* isochronous enable */ 208 #define OHCI_CTRL_CLE (1 << 4) /* control list enable */ 209 #define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */ 210 #define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */ 211 #define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ 212 #define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ 213 #define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */ 214 215 /* pre-shifted values for HCFS */ 216 # define OHCI_USB_RESET (0 << 6) 217 # define OHCI_USB_RESUME (1 << 6) 218 # define OHCI_USB_OPER (2 << 6) 219 # define OHCI_USB_SUSPEND (3 << 6) 220 221 /* 222 * HcCommandStatus (cmdstatus) register masks 223 */ 224 #define OHCI_HCR (1 << 0) /* host controller reset */ 225 #define OHCI_CLF (1 << 1) /* control list filled */ 226 #define OHCI_BLF (1 << 2) /* bulk list filled */ 227 #define OHCI_OCR (1 << 3) /* ownership change request */ 228 #define OHCI_SOC (3 << 16) /* scheduling overrun count */ 229 230 /* 231 * masks used with interrupt registers: 232 * HcInterruptStatus (intrstatus) 233 * HcInterruptEnable (intrenable) 234 * HcInterruptDisable (intrdisable) 235 */ 236 #define OHCI_INTR_SO (1 << 0) /* scheduling overrun */ 237 #define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */ 238 #define OHCI_INTR_SF (1 << 2) /* start frame */ 239 #define OHCI_INTR_RD (1 << 3) /* resume detect */ 240 #define OHCI_INTR_UE (1 << 4) /* unrecoverable error */ 241 #define OHCI_INTR_FNO (1 << 5) /* frame number overflow */ 242 #define OHCI_INTR_RHSC (1 << 6) /* root hub status change */ 243 #define OHCI_INTR_OC (1 << 30) /* ownership change */ 244 #define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */ 245 246 247 /* Virtual Root HUB */ 248 struct virt_root_hub { 249 int devnum; /* Address of Root Hub endpoint */ 250 void *dev; /* was urb */ 251 void *int_addr; 252 int send; 253 int interval; 254 }; 255 256 /* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */ 257 258 /* destination of request */ 259 #define RH_INTERFACE 0x01 260 #define RH_ENDPOINT 0x02 261 #define RH_OTHER 0x03 262 263 #define RH_CLASS 0x20 264 #define RH_VENDOR 0x40 265 266 /* Requests: bRequest << 8 | bmRequestType */ 267 #define RH_GET_STATUS 0x0080 268 #define RH_CLEAR_FEATURE 0x0100 269 #define RH_SET_FEATURE 0x0300 270 #define RH_SET_ADDRESS 0x0500 271 #define RH_GET_DESCRIPTOR 0x0680 272 #define RH_SET_DESCRIPTOR 0x0700 273 #define RH_GET_CONFIGURATION 0x0880 274 #define RH_SET_CONFIGURATION 0x0900 275 #define RH_GET_STATE 0x0280 276 #define RH_GET_INTERFACE 0x0A80 277 #define RH_SET_INTERFACE 0x0B00 278 #define RH_SYNC_FRAME 0x0C80 279 /* Our Vendor Specific Request */ 280 #define RH_SET_EP 0x2000 281 282 283 /* Hub port features */ 284 #define RH_PORT_CONNECTION 0x00 285 #define RH_PORT_ENABLE 0x01 286 #define RH_PORT_SUSPEND 0x02 287 #define RH_PORT_OVER_CURRENT 0x03 288 #define RH_PORT_RESET 0x04 289 #define RH_PORT_POWER 0x08 290 #define RH_PORT_LOW_SPEED 0x09 291 292 #define RH_C_PORT_CONNECTION 0x10 293 #define RH_C_PORT_ENABLE 0x11 294 #define RH_C_PORT_SUSPEND 0x12 295 #define RH_C_PORT_OVER_CURRENT 0x13 296 #define RH_C_PORT_RESET 0x14 297 298 /* Hub features */ 299 #define RH_C_HUB_LOCAL_POWER 0x00 300 #define RH_C_HUB_OVER_CURRENT 0x01 301 302 #define RH_DEVICE_REMOTE_WAKEUP 0x00 303 #define RH_ENDPOINT_STALL 0x01 304 305 #define RH_ACK 0x01 306 #define RH_REQ_ERR -1 307 #define RH_NACK 0x00 308 309 310 /* OHCI ROOT HUB REGISTER MASKS */ 311 312 /* roothub.portstatus [i] bits */ 313 #define RH_PS_CCS 0x00000001 /* current connect status */ 314 #define RH_PS_PES 0x00000002 /* port enable status*/ 315 #define RH_PS_PSS 0x00000004 /* port suspend status */ 316 #define RH_PS_POCI 0x00000008 /* port over current indicator */ 317 #define RH_PS_PRS 0x00000010 /* port reset status */ 318 #define RH_PS_PPS 0x00000100 /* port power status */ 319 #define RH_PS_LSDA 0x00000200 /* low speed device attached */ 320 #define RH_PS_CSC 0x00010000 /* connect status change */ 321 #define RH_PS_PESC 0x00020000 /* port enable status change */ 322 #define RH_PS_PSSC 0x00040000 /* port suspend status change */ 323 #define RH_PS_OCIC 0x00080000 /* over current indicator change */ 324 #define RH_PS_PRSC 0x00100000 /* port reset status change */ 325 326 /* roothub.status bits */ 327 #define RH_HS_LPS 0x00000001 /* local power status */ 328 #define RH_HS_OCI 0x00000002 /* over current indicator */ 329 #define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */ 330 #define RH_HS_LPSC 0x00010000 /* local power status change */ 331 #define RH_HS_OCIC 0x00020000 /* over current indicator change */ 332 #define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */ 333 334 /* roothub.b masks */ 335 #define RH_B_DR 0x0000ffff /* device removable flags */ 336 #define RH_B_PPCM 0xffff0000 /* port power control mask */ 337 338 /* roothub.a masks */ 339 #define RH_A_NDP (0xff << 0) /* number of downstream ports */ 340 #define RH_A_PSM (1 << 8) /* power switching mode */ 341 #define RH_A_NPS (1 << 9) /* no power switching */ 342 #define RH_A_DT (1 << 10) /* device type (mbz) */ 343 #define RH_A_OCPM (1 << 11) /* over current protection mode */ 344 #define RH_A_NOCP (1 << 12) /* no over current protection */ 345 #define RH_A_POTPGT (0xff << 24) /* power on to power good time */ 346 347 /* urb */ 348 #define N_URB_TD 48 349 typedef struct 350 { 351 ed_t *ed; 352 __u16 length; /* number of tds associated with this request */ 353 __u16 td_cnt; /* number of tds already serviced */ 354 struct usb_device *dev; 355 int state; 356 unsigned long pipe; 357 void *transfer_buffer; 358 int transfer_buffer_length; 359 int interval; 360 int actual_length; 361 int finished; 362 td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */ 363 } urb_priv_t; 364 #define URB_DEL 1 365 366 #define NUM_EDS 8 /* num of preallocated endpoint descriptors */ 367 368 #define NUM_TD 64 /* we need more TDs than EDs */ 369 370 #define NUM_INT_DEVS 8 /* num of ohci_dev structs for int endpoints */ 371 372 typedef struct ohci_device { 373 ed_t ed[NUM_EDS] __aligned(ED_ALIGNMENT); 374 td_t tds[NUM_TD] __aligned(TD_ALIGNMENT); 375 int ed_cnt; 376 int devnum; 377 } ohci_dev_t; 378 379 /* 380 * This is the full ohci controller description 381 * 382 * Note how the "proper" USB information is just 383 * a subset of what the full implementation needs. (Linus) 384 */ 385 386 387 typedef struct ohci { 388 /* this allocates EDs for all possible endpoints */ 389 struct ohci_device ohci_dev __aligned(TD_ALIGNMENT); 390 struct ohci_device int_dev[NUM_INT_DEVS] __aligned(TD_ALIGNMENT); 391 struct ohci_hcca *hcca; /* hcca */ 392 /*dma_addr_t hcca_dma;*/ 393 394 int irq; 395 int disabled; /* e.g. got a UE, we're hung */ 396 int sleeping; 397 unsigned long flags; /* for HC bugs */ 398 399 struct ohci_regs *regs; /* OHCI controller's memory */ 400 401 int ohci_int_load[32]; /* load of the 32 Interrupt Chains (for load balancing)*/ 402 ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */ 403 ed_t *ed_bulktail; /* last endpoint of bulk list */ 404 ed_t *ed_controltail; /* last endpoint of control list */ 405 int intrstatus; 406 __u32 hc_control; /* copy of the hc control reg */ 407 struct usb_device *dev[32]; 408 struct virt_root_hub rh; 409 410 const char *slot_name; 411 } ohci_t; 412 413 #ifdef CONFIG_DM_USB 414 extern struct dm_usb_ops ohci_usb_ops; 415 416 int ohci_register(struct udevice *dev, struct ohci_regs *regs); 417 int ohci_deregister(struct udevice *dev); 418 #endif 419