1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /*- 3 * Copyright (c) 2007-2008, Juniper Networks, Inc. 4 * Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it> 5 * All rights reserved. 6 */ 7 8 #ifndef USB_EHCI_H 9 #define USB_EHCI_H 10 11 #include <usb.h> 12 #include <generic-phy.h> 13 14 /* Section 2.2.3 - N_PORTS */ 15 #define MAX_HC_PORTS 15 16 17 /* 18 * Register Space. 19 */ 20 struct ehci_hccr { 21 uint32_t cr_capbase; 22 #define HC_LENGTH(p) (((p) >> 0) & 0x00ff) 23 #define HC_VERSION(p) (((p) >> 16) & 0xffff) 24 uint32_t cr_hcsparams; 25 #define HCS_PPC(p) ((p) & (1 << 4)) 26 #define HCS_INDICATOR(p) ((p) & (1 << 16)) /* Port indicators */ 27 #define HCS_N_PORTS(p) (((p) >> 0) & 0xf) 28 uint32_t cr_hccparams; 29 uint8_t cr_hcsp_portrt[8]; 30 } __attribute__ ((packed, aligned(4))); 31 32 struct ehci_hcor { 33 uint32_t or_usbcmd; 34 #define CMD_PARK (1 << 11) /* enable "park" */ 35 #define CMD_PARK_CNT(c) (((c) >> 8) & 3) /* how many transfers to park */ 36 #define CMD_LRESET (1 << 7) /* partial reset */ 37 #define CMD_IAAD (1 << 6) /* "doorbell" interrupt */ 38 #define CMD_ASE (1 << 5) /* async schedule enable */ 39 #define CMD_PSE (1 << 4) /* periodic schedule enable */ 40 #define CMD_RESET (1 << 1) /* reset HC not bus */ 41 #define CMD_RUN (1 << 0) /* start/stop HC */ 42 uint32_t or_usbsts; 43 #define STS_ASS (1 << 15) 44 #define STS_PSS (1 << 14) 45 #define STS_HALT (1 << 12) 46 uint32_t or_usbintr; 47 #define INTR_UE (1 << 0) /* USB interrupt enable */ 48 #define INTR_UEE (1 << 1) /* USB error interrupt enable */ 49 #define INTR_PCE (1 << 2) /* Port change detect enable */ 50 #define INTR_SEE (1 << 4) /* system error enable */ 51 #define INTR_AAE (1 << 5) /* Interrupt on async adavance enable */ 52 uint32_t or_frindex; 53 uint32_t or_ctrldssegment; 54 uint32_t or_periodiclistbase; 55 uint32_t or_asynclistaddr; 56 uint32_t _reserved_0_; 57 uint32_t or_burstsize; 58 uint32_t or_txfilltuning; 59 #define TXFIFO_THRESH_MASK (0x3f << 16) 60 #define TXFIFO_THRESH(p) ((p & 0x3f) << 16) 61 uint32_t _reserved_1_[6]; 62 uint32_t or_configflag; 63 #define FLAG_CF (1 << 0) /* true: we'll support "high speed" */ 64 uint32_t or_portsc[MAX_HC_PORTS]; 65 #define PORTSC_PSPD(x) (((x) >> 26) & 0x3) 66 #define PORTSC_PSPD_FS 0x0 67 #define PORTSC_PSPD_LS 0x1 68 #define PORTSC_PSPD_HS 0x2 69 uint32_t or_systune; 70 } __attribute__ ((packed, aligned(4))); 71 72 #define USBMODE 0x68 /* USB Device mode */ 73 #define USBMODE_SDIS (1 << 3) /* Stream disable */ 74 #define USBMODE_BE (1 << 2) /* BE/LE endiannes select */ 75 #define USBMODE_CM_HC (3 << 0) /* host controller mode */ 76 #define USBMODE_CM_IDLE (0 << 0) /* idle state */ 77 78 /* Interface descriptor */ 79 struct usb_linux_interface_descriptor { 80 unsigned char bLength; 81 unsigned char bDescriptorType; 82 unsigned char bInterfaceNumber; 83 unsigned char bAlternateSetting; 84 unsigned char bNumEndpoints; 85 unsigned char bInterfaceClass; 86 unsigned char bInterfaceSubClass; 87 unsigned char bInterfaceProtocol; 88 unsigned char iInterface; 89 } __attribute__ ((packed)); 90 91 /* Configuration descriptor information.. */ 92 struct usb_linux_config_descriptor { 93 unsigned char bLength; 94 unsigned char bDescriptorType; 95 unsigned short wTotalLength; 96 unsigned char bNumInterfaces; 97 unsigned char bConfigurationValue; 98 unsigned char iConfiguration; 99 unsigned char bmAttributes; 100 unsigned char MaxPower; 101 } __attribute__ ((packed)); 102 103 #if defined CONFIG_EHCI_DESC_BIG_ENDIAN 104 #define ehci_readl(x) be32_to_cpu(__raw_readl(x)) 105 #define ehci_writel(a, b) __raw_writel(cpu_to_be32(b), a) 106 #else 107 #define ehci_readl(x) readl(x) 108 #define ehci_writel(a, b) writel(b, a) 109 #endif 110 111 #if defined CONFIG_EHCI_MMIO_BIG_ENDIAN 112 #define hc32_to_cpu(x) be32_to_cpu((x)) 113 #define cpu_to_hc32(x) cpu_to_be32((x)) 114 #else 115 #define hc32_to_cpu(x) le32_to_cpu((x)) 116 #define cpu_to_hc32(x) cpu_to_le32((x)) 117 #endif 118 119 #define EHCI_PS_WKOC_E (1 << 22) /* RW wake on over current */ 120 #define EHCI_PS_WKDSCNNT_E (1 << 21) /* RW wake on disconnect */ 121 #define EHCI_PS_WKCNNT_E (1 << 20) /* RW wake on connect */ 122 #define EHCI_PS_PO (1 << 13) /* RW port owner */ 123 #define EHCI_PS_PP (1 << 12) /* RW,RO port power */ 124 #define EHCI_PS_LS (3 << 10) /* RO line status */ 125 #define EHCI_PS_PR (1 << 8) /* RW port reset */ 126 #define EHCI_PS_SUSP (1 << 7) /* RW suspend */ 127 #define EHCI_PS_FPR (1 << 6) /* RW force port resume */ 128 #define EHCI_PS_OCC (1 << 5) /* RWC over current change */ 129 #define EHCI_PS_OCA (1 << 4) /* RO over current active */ 130 #define EHCI_PS_PEC (1 << 3) /* RWC port enable change */ 131 #define EHCI_PS_PE (1 << 2) /* RW port enable */ 132 #define EHCI_PS_CSC (1 << 1) /* RWC connect status change */ 133 #define EHCI_PS_CS (1 << 0) /* RO connect status */ 134 #define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC) 135 136 #define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == (1 << 10)) 137 138 /* 139 * Schedule Interface Space. 140 * 141 * IMPORTANT: Software must ensure that no interface data structure 142 * reachable by the EHCI host controller spans a 4K page boundary! 143 * 144 * Periodic transfers (i.e. isochronous and interrupt transfers) are 145 * not supported. 146 */ 147 148 /* Queue Element Transfer Descriptor (qTD). */ 149 struct qTD { 150 /* this part defined by EHCI spec */ 151 uint32_t qt_next; /* see EHCI 3.5.1 */ 152 #define QT_NEXT_TERMINATE 1 153 uint32_t qt_altnext; /* see EHCI 3.5.2 */ 154 uint32_t qt_token; /* see EHCI 3.5.3 */ 155 #define QT_TOKEN_DT(x) (((x) & 0x1) << 31) /* Data Toggle */ 156 #define QT_TOKEN_GET_DT(x) (((x) >> 31) & 0x1) 157 #define QT_TOKEN_TOTALBYTES(x) (((x) & 0x7fff) << 16) /* Total Bytes to Transfer */ 158 #define QT_TOKEN_GET_TOTALBYTES(x) (((x) >> 16) & 0x7fff) 159 #define QT_TOKEN_IOC(x) (((x) & 0x1) << 15) /* Interrupt On Complete */ 160 #define QT_TOKEN_CPAGE(x) (((x) & 0x7) << 12) /* Current Page */ 161 #define QT_TOKEN_CERR(x) (((x) & 0x3) << 10) /* Error Counter */ 162 #define QT_TOKEN_PID(x) (((x) & 0x3) << 8) /* PID Code */ 163 #define QT_TOKEN_PID_OUT 0x0 164 #define QT_TOKEN_PID_IN 0x1 165 #define QT_TOKEN_PID_SETUP 0x2 166 #define QT_TOKEN_STATUS(x) (((x) & 0xff) << 0) /* Status */ 167 #define QT_TOKEN_GET_STATUS(x) (((x) >> 0) & 0xff) 168 #define QT_TOKEN_STATUS_ACTIVE 0x80 169 #define QT_TOKEN_STATUS_HALTED 0x40 170 #define QT_TOKEN_STATUS_DATBUFERR 0x20 171 #define QT_TOKEN_STATUS_BABBLEDET 0x10 172 #define QT_TOKEN_STATUS_XACTERR 0x08 173 #define QT_TOKEN_STATUS_MISSEDUFRAME 0x04 174 #define QT_TOKEN_STATUS_SPLITXSTATE 0x02 175 #define QT_TOKEN_STATUS_PERR 0x01 176 #define QT_BUFFER_CNT 5 177 uint32_t qt_buffer[QT_BUFFER_CNT]; /* see EHCI 3.5.4 */ 178 uint32_t qt_buffer_hi[QT_BUFFER_CNT]; /* Appendix B */ 179 /* pad struct for 32 byte alignment */ 180 uint32_t unused[3]; 181 }; 182 183 #define EHCI_PAGE_SIZE 4096 184 185 /* Queue Head (QH). */ 186 struct QH { 187 uint32_t qh_link; 188 #define QH_LINK_TERMINATE 1 189 #define QH_LINK_TYPE_ITD 0 190 #define QH_LINK_TYPE_QH 2 191 #define QH_LINK_TYPE_SITD 4 192 #define QH_LINK_TYPE_FSTN 6 193 uint32_t qh_endpt1; 194 #define QH_ENDPT1_RL(x) (((x) & 0xf) << 28) /* NAK Count Reload */ 195 #define QH_ENDPT1_C(x) (((x) & 0x1) << 27) /* Control Endpoint Flag */ 196 #define QH_ENDPT1_MAXPKTLEN(x) (((x) & 0x7ff) << 16) /* Maximum Packet Length */ 197 #define QH_ENDPT1_H(x) (((x) & 0x1) << 15) /* Head of Reclamation List Flag */ 198 #define QH_ENDPT1_DTC(x) (((x) & 0x1) << 14) /* Data Toggle Control */ 199 #define QH_ENDPT1_DTC_IGNORE_QTD_TD 0x0 200 #define QH_ENDPT1_DTC_DT_FROM_QTD 0x1 201 #define QH_ENDPT1_EPS(x) (((x) & 0x3) << 12) /* Endpoint Speed */ 202 #define QH_ENDPT1_EPS_FS 0x0 203 #define QH_ENDPT1_EPS_LS 0x1 204 #define QH_ENDPT1_EPS_HS 0x2 205 #define QH_ENDPT1_ENDPT(x) (((x) & 0xf) << 8) /* Endpoint Number */ 206 #define QH_ENDPT1_I(x) (((x) & 0x1) << 7) /* Inactivate on Next Transaction */ 207 #define QH_ENDPT1_DEVADDR(x) (((x) & 0x7f) << 0) /* Device Address */ 208 uint32_t qh_endpt2; 209 #define QH_ENDPT2_MULT(x) (((x) & 0x3) << 30) /* High-Bandwidth Pipe Multiplier */ 210 #define QH_ENDPT2_PORTNUM(x) (((x) & 0x7f) << 23) /* Port Number */ 211 #define QH_ENDPT2_HUBADDR(x) (((x) & 0x7f) << 16) /* Hub Address */ 212 #define QH_ENDPT2_UFCMASK(x) (((x) & 0xff) << 8) /* Split Completion Mask */ 213 #define QH_ENDPT2_UFSMASK(x) (((x) & 0xff) << 0) /* Interrupt Schedule Mask */ 214 uint32_t qh_curtd; 215 struct qTD qh_overlay; 216 /* 217 * Add dummy fill value to make the size of this struct 218 * aligned to 32 bytes 219 */ 220 union { 221 uint32_t fill[4]; 222 void *buffer; 223 }; 224 }; 225 226 /* Tweak flags for EHCI, used to control operation */ 227 enum { 228 /* don't use or_configflag in init */ 229 EHCI_TWEAK_NO_INIT_CF = 1 << 0, 230 }; 231 232 struct ehci_ctrl; 233 234 struct ehci_ops { 235 void (*set_usb_mode)(struct ehci_ctrl *ctrl); 236 int (*get_port_speed)(struct ehci_ctrl *ctrl, uint32_t reg); 237 void (*powerup_fixup)(struct ehci_ctrl *ctrl, uint32_t *status_reg, 238 uint32_t *reg); 239 uint32_t *(*get_portsc_register)(struct ehci_ctrl *ctrl, int port); 240 int (*init_after_reset)(struct ehci_ctrl *ctrl); 241 }; 242 243 struct ehci_ctrl { 244 enum usb_init_type init; 245 struct ehci_hccr *hccr; /* R/O registers, not need for volatile */ 246 struct ehci_hcor *hcor; 247 int rootdev; 248 uint16_t portreset; 249 struct QH qh_list __aligned(USB_DMA_MINALIGN); 250 struct QH periodic_queue __aligned(USB_DMA_MINALIGN); 251 uint32_t *periodic_list; 252 int periodic_schedules; 253 int ntds; 254 struct ehci_ops ops; 255 void *priv; /* client's private data */ 256 }; 257 258 /** 259 * ehci_set_controller_info() - Set up private data for the controller 260 * 261 * This function can be called in ehci_hcd_init() to tell the EHCI layer 262 * about the controller's private data pointer. Then in the above functions 263 * this can be accessed given the struct ehci_ctrl pointer. Also special 264 * EHCI operation methods can be provided if required 265 * 266 * @index: Controller number to set 267 * @priv: Controller pointer 268 * @ops: Controller operations, or NULL to use default 269 */ 270 void ehci_set_controller_priv(int index, void *priv, 271 const struct ehci_ops *ops); 272 273 /** 274 * ehci_get_controller_priv() - Get controller private data 275 * 276 * @index Controller number to get 277 * @return controller pointer for this index 278 */ 279 void *ehci_get_controller_priv(int index); 280 281 /* Low level init functions */ 282 int ehci_hcd_init(int index, enum usb_init_type init, 283 struct ehci_hccr **hccr, struct ehci_hcor **hcor); 284 int ehci_hcd_stop(int index); 285 286 int ehci_register(struct udevice *dev, struct ehci_hccr *hccr, 287 struct ehci_hcor *hcor, const struct ehci_ops *ops, 288 uint tweaks, enum usb_init_type init); 289 int ehci_deregister(struct udevice *dev); 290 extern struct dm_usb_ops ehci_usb_ops; 291 292 /* EHCI PHY functions */ 293 int ehci_setup_phy(struct udevice *dev, struct phy *phy, int index); 294 int ehci_shutdown_phy(struct udevice *dev, struct phy *phy); 295 296 #endif /* USB_EHCI_H */ 297