1 /*- 2 * Copyright (c) 2007-2008, Juniper Networks, Inc. 3 * Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it> 4 * All rights reserved. 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License as 8 * published by the Free Software Foundation version 2 of 9 * the License. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 19 * MA 02111-1307 USA 20 */ 21 22 #ifndef USB_EHCI_H 23 #define USB_EHCI_H 24 25 #include <usb.h> 26 27 #if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) 28 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 29 #endif 30 31 /* 32 * Register Space. 33 */ 34 struct ehci_hccr { 35 uint32_t cr_capbase; 36 #define HC_LENGTH(p) (((p) >> 0) & 0x00ff) 37 #define HC_VERSION(p) (((p) >> 16) & 0xffff) 38 uint32_t cr_hcsparams; 39 #define HCS_PPC(p) ((p) & (1 << 4)) 40 #define HCS_INDICATOR(p) ((p) & (1 << 16)) /* Port indicators */ 41 #define HCS_N_PORTS(p) (((p) >> 0) & 0xf) 42 uint32_t cr_hccparams; 43 uint8_t cr_hcsp_portrt[8]; 44 } __attribute__ ((packed, aligned(4))); 45 46 struct ehci_hcor { 47 uint32_t or_usbcmd; 48 #define CMD_PARK (1 << 11) /* enable "park" */ 49 #define CMD_PARK_CNT(c) (((c) >> 8) & 3) /* how many transfers to park */ 50 #define CMD_ASE (1 << 5) /* async schedule enable */ 51 #define CMD_LRESET (1 << 7) /* partial reset */ 52 #define CMD_IAAD (1 << 5) /* "doorbell" interrupt */ 53 #define CMD_PSE (1 << 4) /* periodic schedule enable */ 54 #define CMD_RESET (1 << 1) /* reset HC not bus */ 55 #define CMD_RUN (1 << 0) /* start/stop HC */ 56 uint32_t or_usbsts; 57 #define STS_ASS (1 << 15) 58 #define STS_PSS (1 << 14) 59 #define STS_HALT (1 << 12) 60 uint32_t or_usbintr; 61 #define INTR_UE (1 << 0) /* USB interrupt enable */ 62 #define INTR_UEE (1 << 1) /* USB error interrupt enable */ 63 #define INTR_PCE (1 << 2) /* Port change detect enable */ 64 #define INTR_SEE (1 << 4) /* system error enable */ 65 #define INTR_AAE (1 << 5) /* Interrupt on async adavance enable */ 66 uint32_t or_frindex; 67 uint32_t or_ctrldssegment; 68 uint32_t or_periodiclistbase; 69 uint32_t or_asynclistaddr; 70 uint32_t _reserved_0_; 71 uint32_t or_burstsize; 72 uint32_t or_txfilltuning; 73 #define TXFIFO_THRESH_MASK (0x3f << 16) 74 #define TXFIFO_THRESH(p) ((p & 0x3f) << 16) 75 uint32_t _reserved_1_[6]; 76 uint32_t or_configflag; 77 #define FLAG_CF (1 << 0) /* true: we'll support "high speed" */ 78 uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS]; 79 #define PORTSC_PSPD(x) (((x) >> 26) & 0x3) 80 #define PORTSC_PSPD_FS 0x0 81 #define PORTSC_PSPD_LS 0x1 82 #define PORTSC_PSPD_HS 0x2 83 uint32_t or_systune; 84 } __attribute__ ((packed, aligned(4))); 85 86 #define USBMODE 0x68 /* USB Device mode */ 87 #define USBMODE_SDIS (1 << 3) /* Stream disable */ 88 #define USBMODE_BE (1 << 2) /* BE/LE endiannes select */ 89 #define USBMODE_CM_HC (3 << 0) /* host controller mode */ 90 #define USBMODE_CM_IDLE (0 << 0) /* idle state */ 91 92 /* Interface descriptor */ 93 struct usb_linux_interface_descriptor { 94 unsigned char bLength; 95 unsigned char bDescriptorType; 96 unsigned char bInterfaceNumber; 97 unsigned char bAlternateSetting; 98 unsigned char bNumEndpoints; 99 unsigned char bInterfaceClass; 100 unsigned char bInterfaceSubClass; 101 unsigned char bInterfaceProtocol; 102 unsigned char iInterface; 103 } __attribute__ ((packed)); 104 105 /* Configuration descriptor information.. */ 106 struct usb_linux_config_descriptor { 107 unsigned char bLength; 108 unsigned char bDescriptorType; 109 unsigned short wTotalLength; 110 unsigned char bNumInterfaces; 111 unsigned char bConfigurationValue; 112 unsigned char iConfiguration; 113 unsigned char bmAttributes; 114 unsigned char MaxPower; 115 } __attribute__ ((packed)); 116 117 #if defined CONFIG_EHCI_DESC_BIG_ENDIAN 118 #define ehci_readl(x) (*((volatile u32 *)(x))) 119 #define ehci_writel(a, b) (*((volatile u32 *)(a)) = ((volatile u32)b)) 120 #else 121 #define ehci_readl(x) cpu_to_le32((*((volatile u32 *)(x)))) 122 #define ehci_writel(a, b) (*((volatile u32 *)(a)) = \ 123 cpu_to_le32(((volatile u32)b))) 124 #endif 125 126 #if defined CONFIG_EHCI_MMIO_BIG_ENDIAN 127 #define hc32_to_cpu(x) be32_to_cpu((x)) 128 #define cpu_to_hc32(x) cpu_to_be32((x)) 129 #else 130 #define hc32_to_cpu(x) le32_to_cpu((x)) 131 #define cpu_to_hc32(x) cpu_to_le32((x)) 132 #endif 133 134 #define EHCI_PS_WKOC_E (1 << 22) /* RW wake on over current */ 135 #define EHCI_PS_WKDSCNNT_E (1 << 21) /* RW wake on disconnect */ 136 #define EHCI_PS_WKCNNT_E (1 << 20) /* RW wake on connect */ 137 #define EHCI_PS_PO (1 << 13) /* RW port owner */ 138 #define EHCI_PS_PP (1 << 12) /* RW,RO port power */ 139 #define EHCI_PS_LS (3 << 10) /* RO line status */ 140 #define EHCI_PS_PR (1 << 8) /* RW port reset */ 141 #define EHCI_PS_SUSP (1 << 7) /* RW suspend */ 142 #define EHCI_PS_FPR (1 << 6) /* RW force port resume */ 143 #define EHCI_PS_OCC (1 << 5) /* RWC over current change */ 144 #define EHCI_PS_OCA (1 << 4) /* RO over current active */ 145 #define EHCI_PS_PEC (1 << 3) /* RWC port enable change */ 146 #define EHCI_PS_PE (1 << 2) /* RW port enable */ 147 #define EHCI_PS_CSC (1 << 1) /* RWC connect status change */ 148 #define EHCI_PS_CS (1 << 0) /* RO connect status */ 149 #define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC) 150 151 #define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == (1 << 10)) 152 153 /* 154 * Schedule Interface Space. 155 * 156 * IMPORTANT: Software must ensure that no interface data structure 157 * reachable by the EHCI host controller spans a 4K page boundary! 158 * 159 * Periodic transfers (i.e. isochronous and interrupt transfers) are 160 * not supported. 161 */ 162 163 /* Queue Element Transfer Descriptor (qTD). */ 164 struct qTD { 165 /* this part defined by EHCI spec */ 166 uint32_t qt_next; /* see EHCI 3.5.1 */ 167 #define QT_NEXT_TERMINATE 1 168 uint32_t qt_altnext; /* see EHCI 3.5.2 */ 169 uint32_t qt_token; /* see EHCI 3.5.3 */ 170 #define QT_TOKEN_DT(x) (((x) & 0x1) << 31) /* Data Toggle */ 171 #define QT_TOKEN_GET_DT(x) (((x) >> 31) & 0x1) 172 #define QT_TOKEN_TOTALBYTES(x) (((x) & 0x7fff) << 16) /* Total Bytes to Transfer */ 173 #define QT_TOKEN_GET_TOTALBYTES(x) (((x) >> 16) & 0x7fff) 174 #define QT_TOKEN_IOC(x) (((x) & 0x1) << 15) /* Interrupt On Complete */ 175 #define QT_TOKEN_CPAGE(x) (((x) & 0x7) << 12) /* Current Page */ 176 #define QT_TOKEN_CERR(x) (((x) & 0x3) << 10) /* Error Counter */ 177 #define QT_TOKEN_PID(x) (((x) & 0x3) << 8) /* PID Code */ 178 #define QT_TOKEN_PID_OUT 0x0 179 #define QT_TOKEN_PID_IN 0x1 180 #define QT_TOKEN_PID_SETUP 0x2 181 #define QT_TOKEN_STATUS(x) (((x) & 0xff) << 0) /* Status */ 182 #define QT_TOKEN_GET_STATUS(x) (((x) >> 0) & 0xff) 183 #define QT_TOKEN_STATUS_ACTIVE 0x80 184 #define QT_TOKEN_STATUS_HALTED 0x40 185 #define QT_TOKEN_STATUS_DATBUFERR 0x20 186 #define QT_TOKEN_STATUS_BABBLEDET 0x10 187 #define QT_TOKEN_STATUS_XACTERR 0x08 188 #define QT_TOKEN_STATUS_MISSEDUFRAME 0x04 189 #define QT_TOKEN_STATUS_SPLITXSTATE 0x02 190 #define QT_TOKEN_STATUS_PERR 0x01 191 #define QT_BUFFER_CNT 5 192 uint32_t qt_buffer[QT_BUFFER_CNT]; /* see EHCI 3.5.4 */ 193 uint32_t qt_buffer_hi[QT_BUFFER_CNT]; /* Appendix B */ 194 /* pad struct for 32 byte alignment */ 195 uint32_t unused[3]; 196 }; 197 198 #define EHCI_PAGE_SIZE 4096 199 200 /* Queue Head (QH). */ 201 struct QH { 202 uint32_t qh_link; 203 #define QH_LINK_TERMINATE 1 204 #define QH_LINK_TYPE_ITD 0 205 #define QH_LINK_TYPE_QH 2 206 #define QH_LINK_TYPE_SITD 4 207 #define QH_LINK_TYPE_FSTN 6 208 uint32_t qh_endpt1; 209 #define QH_ENDPT1_RL(x) (((x) & 0xf) << 28) /* NAK Count Reload */ 210 #define QH_ENDPT1_C(x) (((x) & 0x1) << 27) /* Control Endpoint Flag */ 211 #define QH_ENDPT1_MAXPKTLEN(x) (((x) & 0x7ff) << 16) /* Maximum Packet Length */ 212 #define QH_ENDPT1_H(x) (((x) & 0x1) << 15) /* Head of Reclamation List Flag */ 213 #define QH_ENDPT1_DTC(x) (((x) & 0x1) << 14) /* Data Toggle Control */ 214 #define QH_ENDPT1_DTC_IGNORE_QTD_TD 0x0 215 #define QH_ENDPT1_DTC_DT_FROM_QTD 0x1 216 #define QH_ENDPT1_EPS(x) (((x) & 0x3) << 12) /* Endpoint Speed */ 217 #define QH_ENDPT1_EPS_FS 0x0 218 #define QH_ENDPT1_EPS_LS 0x1 219 #define QH_ENDPT1_EPS_HS 0x2 220 #define QH_ENDPT1_ENDPT(x) (((x) & 0xf) << 8) /* Endpoint Number */ 221 #define QH_ENDPT1_I(x) (((x) & 0x1) << 7) /* Inactivate on Next Transaction */ 222 #define QH_ENDPT1_DEVADDR(x) (((x) & 0x7f) << 0) /* Device Address */ 223 uint32_t qh_endpt2; 224 #define QH_ENDPT2_MULT(x) (((x) & 0x3) << 30) /* High-Bandwidth Pipe Multiplier */ 225 #define QH_ENDPT2_PORTNUM(x) (((x) & 0x7f) << 23) /* Port Number */ 226 #define QH_ENDPT2_HUBADDR(x) (((x) & 0x7f) << 16) /* Hub Address */ 227 #define QH_ENDPT2_UFCMASK(x) (((x) & 0xff) << 8) /* Split Completion Mask */ 228 #define QH_ENDPT2_UFSMASK(x) (((x) & 0xff) << 0) /* Interrupt Schedule Mask */ 229 uint32_t qh_curtd; 230 struct qTD qh_overlay; 231 /* 232 * Add dummy fill value to make the size of this struct 233 * aligned to 32 bytes 234 */ 235 union { 236 uint32_t fill[4]; 237 void *buffer; 238 }; 239 }; 240 241 struct ehci_ctrl { 242 struct ehci_hccr *hccr; /* R/O registers, not need for volatile */ 243 struct ehci_hcor *hcor; 244 int rootdev; 245 uint16_t portreset; 246 struct QH qh_list __aligned(USB_DMA_MINALIGN); 247 struct QH periodic_queue __aligned(USB_DMA_MINALIGN); 248 uint32_t *periodic_list; 249 int ntds; 250 }; 251 252 /* Low level init functions */ 253 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor); 254 int ehci_hcd_stop(int index); 255 256 #endif /* USB_EHCI_H */ 257