1 /* 2 * Copyright (c) 2015 Sanchayan Maity <sanchayan.maity@toradex.com> 3 * Copyright (C) 2015 Toradex AG 4 * 5 * Based on ehci-mx6 driver 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <dm.h> 12 #include <usb.h> 13 #include <errno.h> 14 #include <linux/compiler.h> 15 #include <asm/io.h> 16 #include <asm-generic/gpio.h> 17 #include <asm/arch/clock.h> 18 #include <asm/arch/imx-regs.h> 19 #include <asm/arch/crm_regs.h> 20 #include <asm/mach-imx/iomux-v3.h> 21 #include <asm/mach-imx/regs-usbphy.h> 22 #include <usb/ehci-ci.h> 23 #include <libfdt.h> 24 #include <fdtdec.h> 25 26 #include "ehci.h" 27 28 #define USB_NC_REG_OFFSET 0x00000800 29 30 #define ANADIG_PLL_CTRL_EN_USB_CLKS (1 << 6) 31 32 #define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */ 33 #define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */ 34 35 /* USBCMD */ 36 #define UCMD_RUN_STOP (1 << 0) /* controller run/stop */ 37 #define UCMD_RESET (1 << 1) /* controller reset */ 38 39 DECLARE_GLOBAL_DATA_PTR; 40 41 static const unsigned phy_bases[] = { 42 USB_PHY0_BASE_ADDR, 43 USB_PHY1_BASE_ADDR, 44 }; 45 46 static const unsigned nc_reg_bases[] = { 47 USBC0_BASE_ADDR, 48 USBC1_BASE_ADDR, 49 }; 50 51 static void usb_internal_phy_clock_gate(int index) 52 { 53 void __iomem *phy_reg; 54 55 phy_reg = (void __iomem *)phy_bases[index]; 56 clrbits_le32(phy_reg + USBPHY_CTRL, USBPHY_CTRL_CLKGATE); 57 } 58 59 static void usb_power_config(int index) 60 { 61 struct anadig_reg __iomem *anadig = 62 (struct anadig_reg __iomem *)ANADIG_BASE_ADDR; 63 void __iomem *pll_ctrl; 64 65 switch (index) { 66 case 0: 67 pll_ctrl = &anadig->pll3_ctrl; 68 clrbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_BYPASS); 69 setbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_ENABLE 70 | ANADIG_PLL3_CTRL_POWERDOWN 71 | ANADIG_PLL_CTRL_EN_USB_CLKS); 72 break; 73 case 1: 74 pll_ctrl = &anadig->pll7_ctrl; 75 clrbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_BYPASS); 76 setbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_ENABLE 77 | ANADIG_PLL7_CTRL_POWERDOWN 78 | ANADIG_PLL_CTRL_EN_USB_CLKS); 79 break; 80 default: 81 return; 82 } 83 } 84 85 static void usb_phy_enable(int index, struct usb_ehci *ehci) 86 { 87 void __iomem *phy_reg; 88 void __iomem *phy_ctrl; 89 void __iomem *usb_cmd; 90 91 phy_reg = (void __iomem *)phy_bases[index]; 92 phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL); 93 usb_cmd = (void __iomem *)&ehci->usbcmd; 94 95 /* Stop then Reset */ 96 clrbits_le32(usb_cmd, UCMD_RUN_STOP); 97 while (readl(usb_cmd) & UCMD_RUN_STOP) 98 ; 99 100 setbits_le32(usb_cmd, UCMD_RESET); 101 while (readl(usb_cmd) & UCMD_RESET) 102 ; 103 104 /* Reset USBPHY module */ 105 setbits_le32(phy_ctrl, USBPHY_CTRL_SFTRST); 106 udelay(10); 107 108 /* Remove CLKGATE and SFTRST */ 109 clrbits_le32(phy_ctrl, USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST); 110 udelay(10); 111 112 /* Power up the PHY */ 113 writel(0, phy_reg + USBPHY_PWD); 114 115 /* Enable FS/LS device */ 116 setbits_le32(phy_ctrl, USBPHY_CTRL_ENUTMILEVEL2 | 117 USBPHY_CTRL_ENUTMILEVEL3); 118 } 119 120 static void usb_oc_config(int index) 121 { 122 void __iomem *ctrl; 123 124 ctrl = (void __iomem *)(nc_reg_bases[index] + USB_NC_REG_OFFSET); 125 126 setbits_le32(ctrl, UCTRL_OVER_CUR_POL); 127 setbits_le32(ctrl, UCTRL_OVER_CUR_DIS); 128 } 129 130 int __weak board_usb_phy_mode(int port) 131 { 132 return 0; 133 } 134 135 int __weak board_ehci_hcd_init(int port) 136 { 137 return 0; 138 } 139 140 int ehci_vf_common_init(struct usb_ehci *ehci, int index) 141 { 142 int ret; 143 144 /* Do board specific initialisation */ 145 ret = board_ehci_hcd_init(index); 146 if (ret) 147 return ret; 148 149 usb_power_config(index); 150 usb_oc_config(index); 151 usb_internal_phy_clock_gate(index); 152 usb_phy_enable(index, ehci); 153 154 return 0; 155 } 156 157 #ifndef CONFIG_DM_USB 158 int ehci_hcd_init(int index, enum usb_init_type init, 159 struct ehci_hccr **hccr, struct ehci_hcor **hcor) 160 { 161 struct usb_ehci *ehci; 162 enum usb_init_type type; 163 int ret; 164 165 if (index >= ARRAY_SIZE(nc_reg_bases)) 166 return -EINVAL; 167 168 ehci = (struct usb_ehci *)nc_reg_bases[index]; 169 170 ret = ehci_vf_common_init(index); 171 if (ret) 172 return ret; 173 174 *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); 175 *hcor = (struct ehci_hcor *)((uint32_t)*hccr + 176 HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); 177 178 type = board_usb_phy_mode(index); 179 if (type != init) 180 return -ENODEV; 181 182 if (init == USB_INIT_DEVICE) { 183 setbits_le32(&ehci->usbmode, CM_DEVICE); 184 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); 185 setbits_le32(&ehci->portsc, USB_EN); 186 } else if (init == USB_INIT_HOST) { 187 setbits_le32(&ehci->usbmode, CM_HOST); 188 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); 189 setbits_le32(&ehci->portsc, USB_EN); 190 } 191 192 return 0; 193 } 194 195 int ehci_hcd_stop(int index) 196 { 197 return 0; 198 } 199 #else 200 /* Possible port types (dual role mode) */ 201 enum dr_mode { 202 DR_MODE_NONE = 0, 203 DR_MODE_HOST, /* supports host operation */ 204 DR_MODE_DEVICE, /* supports device operation */ 205 DR_MODE_OTG, /* supports both */ 206 }; 207 208 struct ehci_vf_priv_data { 209 struct ehci_ctrl ctrl; 210 struct usb_ehci *ehci; 211 struct gpio_desc cdet_gpio; 212 enum usb_init_type init_type; 213 enum dr_mode dr_mode; 214 u32 portnr; 215 }; 216 217 static int vf_usb_ofdata_to_platdata(struct udevice *dev) 218 { 219 struct ehci_vf_priv_data *priv = dev_get_priv(dev); 220 const void *dt_blob = gd->fdt_blob; 221 int node = dev_of_offset(dev); 222 const char *mode; 223 224 priv->portnr = dev->seq; 225 226 priv->ehci = (struct usb_ehci *)devfdt_get_addr(dev); 227 mode = fdt_getprop(dt_blob, node, "dr_mode", NULL); 228 if (mode) { 229 if (0 == strcmp(mode, "host")) { 230 priv->dr_mode = DR_MODE_HOST; 231 priv->init_type = USB_INIT_HOST; 232 } else if (0 == strcmp(mode, "peripheral")) { 233 priv->dr_mode = DR_MODE_DEVICE; 234 priv->init_type = USB_INIT_DEVICE; 235 } else if (0 == strcmp(mode, "otg")) { 236 priv->dr_mode = DR_MODE_OTG; 237 /* 238 * We set init_type to device by default when OTG 239 * mode is requested. If a valid gpio is provided 240 * we will switch the init_type based on the state 241 * of the gpio pin. 242 */ 243 priv->init_type = USB_INIT_DEVICE; 244 } else { 245 debug("%s: Cannot decode dr_mode '%s'\n", 246 __func__, mode); 247 return -EINVAL; 248 } 249 } else { 250 priv->dr_mode = DR_MODE_HOST; 251 priv->init_type = USB_INIT_HOST; 252 } 253 254 if (priv->dr_mode == DR_MODE_OTG) { 255 gpio_request_by_name_nodev(offset_to_ofnode(node), 256 "fsl,cdet-gpio", 0, &priv->cdet_gpio, 257 GPIOD_IS_IN); 258 if (dm_gpio_is_valid(&priv->cdet_gpio)) { 259 if (dm_gpio_get_value(&priv->cdet_gpio)) 260 priv->init_type = USB_INIT_DEVICE; 261 else 262 priv->init_type = USB_INIT_HOST; 263 } 264 } 265 266 return 0; 267 } 268 269 static int vf_init_after_reset(struct ehci_ctrl *dev) 270 { 271 struct ehci_vf_priv_data *priv = dev->priv; 272 enum usb_init_type type = priv->init_type; 273 struct usb_ehci *ehci = priv->ehci; 274 int ret; 275 276 ret = ehci_vf_common_init(priv->ehci, priv->portnr); 277 if (ret) 278 return ret; 279 280 if (type == USB_INIT_DEVICE) 281 return 0; 282 283 setbits_le32(&ehci->usbmode, CM_HOST); 284 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); 285 setbits_le32(&ehci->portsc, USB_EN); 286 287 mdelay(10); 288 289 return 0; 290 } 291 292 static const struct ehci_ops vf_ehci_ops = { 293 .init_after_reset = vf_init_after_reset 294 }; 295 296 static int vf_usb_bind(struct udevice *dev) 297 { 298 static int num_controllers; 299 300 /* 301 * Without this hack, if we return ENODEV for USB Controller 0, on 302 * probe for the next controller, USB Controller 1 will be given a 303 * sequence number of 0. This conflicts with our requirement of 304 * sequence numbers while initialising the peripherals. 305 */ 306 dev->req_seq = num_controllers; 307 num_controllers++; 308 309 return 0; 310 } 311 312 static int ehci_usb_probe(struct udevice *dev) 313 { 314 struct usb_platdata *plat = dev_get_platdata(dev); 315 struct ehci_vf_priv_data *priv = dev_get_priv(dev); 316 struct usb_ehci *ehci = priv->ehci; 317 struct ehci_hccr *hccr; 318 struct ehci_hcor *hcor; 319 int ret; 320 321 ret = ehci_vf_common_init(ehci, priv->portnr); 322 if (ret) 323 return ret; 324 325 if (priv->init_type != plat->init_type) 326 return -ENODEV; 327 328 if (priv->init_type == USB_INIT_HOST) { 329 setbits_le32(&ehci->usbmode, CM_HOST); 330 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); 331 setbits_le32(&ehci->portsc, USB_EN); 332 } 333 334 mdelay(10); 335 336 hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); 337 hcor = (struct ehci_hcor *)((uint32_t)hccr + 338 HC_LENGTH(ehci_readl(&hccr->cr_capbase))); 339 340 return ehci_register(dev, hccr, hcor, &vf_ehci_ops, 0, priv->init_type); 341 } 342 343 static const struct udevice_id vf_usb_ids[] = { 344 { .compatible = "fsl,vf610-usb" }, 345 { } 346 }; 347 348 U_BOOT_DRIVER(usb_ehci) = { 349 .name = "ehci_vf", 350 .id = UCLASS_USB, 351 .of_match = vf_usb_ids, 352 .bind = vf_usb_bind, 353 .probe = ehci_usb_probe, 354 .remove = ehci_deregister, 355 .ops = &ehci_usb_ops, 356 .ofdata_to_platdata = vf_usb_ofdata_to_platdata, 357 .platdata_auto_alloc_size = sizeof(struct usb_platdata), 358 .priv_auto_alloc_size = sizeof(struct ehci_vf_priv_data), 359 .flags = DM_FLAG_ALLOC_PRIV_DMA, 360 }; 361 #endif 362