1 /* 2 * Copyright (c) 2015 Sanchayan Maity <sanchayan.maity@toradex.com> 3 * Copyright (C) 2015 Toradex AG 4 * 5 * Based on ehci-mx6 driver 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <usb.h> 12 #include <errno.h> 13 #include <linux/compiler.h> 14 #include <asm/io.h> 15 #include <asm/arch/clock.h> 16 #include <asm/arch/imx-regs.h> 17 #include <asm/arch/crm_regs.h> 18 #include <asm/imx-common/iomux-v3.h> 19 #include <asm/imx-common/regs-usbphy.h> 20 #include <usb/ehci-fsl.h> 21 22 #include "ehci.h" 23 24 #define USB_NC_REG_OFFSET 0x00000800 25 26 #define ANADIG_PLL_CTRL_EN_USB_CLKS (1 << 6) 27 28 #define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */ 29 #define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */ 30 31 /* USBCMD */ 32 #define UCMD_RUN_STOP (1 << 0) /* controller run/stop */ 33 #define UCMD_RESET (1 << 1) /* controller reset */ 34 35 static const unsigned phy_bases[] = { 36 USB_PHY0_BASE_ADDR, 37 USB_PHY1_BASE_ADDR, 38 }; 39 40 static const unsigned nc_reg_bases[] = { 41 USBC0_BASE_ADDR, 42 USBC1_BASE_ADDR, 43 }; 44 45 static void usb_internal_phy_clock_gate(int index) 46 { 47 void __iomem *phy_reg; 48 49 phy_reg = (void __iomem *)phy_bases[index]; 50 clrbits_le32(phy_reg + USBPHY_CTRL, USBPHY_CTRL_CLKGATE); 51 } 52 53 static void usb_power_config(int index) 54 { 55 struct anadig_reg __iomem *anadig = 56 (struct anadig_reg __iomem *)ANADIG_BASE_ADDR; 57 void __iomem *pll_ctrl; 58 59 switch (index) { 60 case 0: 61 pll_ctrl = &anadig->pll3_ctrl; 62 clrbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_BYPASS); 63 setbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_ENABLE 64 | ANADIG_PLL3_CTRL_POWERDOWN 65 | ANADIG_PLL_CTRL_EN_USB_CLKS); 66 break; 67 case 1: 68 pll_ctrl = &anadig->pll7_ctrl; 69 clrbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_BYPASS); 70 setbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_ENABLE 71 | ANADIG_PLL7_CTRL_POWERDOWN 72 | ANADIG_PLL_CTRL_EN_USB_CLKS); 73 break; 74 default: 75 return; 76 } 77 } 78 79 static void usb_phy_enable(int index, struct usb_ehci *ehci) 80 { 81 void __iomem *phy_reg; 82 void __iomem *phy_ctrl; 83 void __iomem *usb_cmd; 84 85 phy_reg = (void __iomem *)phy_bases[index]; 86 phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL); 87 usb_cmd = (void __iomem *)&ehci->usbcmd; 88 89 /* Stop then Reset */ 90 clrbits_le32(usb_cmd, UCMD_RUN_STOP); 91 while (readl(usb_cmd) & UCMD_RUN_STOP) 92 ; 93 94 setbits_le32(usb_cmd, UCMD_RESET); 95 while (readl(usb_cmd) & UCMD_RESET) 96 ; 97 98 /* Reset USBPHY module */ 99 setbits_le32(phy_ctrl, USBPHY_CTRL_SFTRST); 100 udelay(10); 101 102 /* Remove CLKGATE and SFTRST */ 103 clrbits_le32(phy_ctrl, USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST); 104 udelay(10); 105 106 /* Power up the PHY */ 107 writel(0, phy_reg + USBPHY_PWD); 108 109 /* Enable FS/LS device */ 110 setbits_le32(phy_ctrl, USBPHY_CTRL_ENUTMILEVEL2 | 111 USBPHY_CTRL_ENUTMILEVEL3); 112 } 113 114 static void usb_oc_config(int index) 115 { 116 void __iomem *ctrl; 117 118 ctrl = (void __iomem *)(nc_reg_bases[index] + USB_NC_REG_OFFSET); 119 120 setbits_le32(ctrl, UCTRL_OVER_CUR_POL); 121 setbits_le32(ctrl, UCTRL_OVER_CUR_DIS); 122 } 123 124 int __weak board_usb_phy_mode(int port) 125 { 126 return 0; 127 } 128 129 int __weak board_ehci_hcd_init(int port) 130 { 131 return 0; 132 } 133 134 int ehci_hcd_init(int index, enum usb_init_type init, 135 struct ehci_hccr **hccr, struct ehci_hcor **hcor) 136 { 137 struct usb_ehci *ehci; 138 enum usb_init_type type; 139 140 if (index >= ARRAY_SIZE(nc_reg_bases)) 141 return -EINVAL; 142 143 ehci = (struct usb_ehci *)nc_reg_bases[index]; 144 145 /* Do board specific initialisation */ 146 board_ehci_hcd_init(index); 147 148 usb_power_config(index); 149 usb_oc_config(index); 150 usb_internal_phy_clock_gate(index); 151 usb_phy_enable(index, ehci); 152 153 *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); 154 *hcor = (struct ehci_hcor *)((uint32_t)*hccr + 155 HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); 156 157 type = board_usb_phy_mode(index); 158 if (type != init) 159 return -ENODEV; 160 161 if (init == USB_INIT_DEVICE) { 162 setbits_le32(&ehci->usbmode, CM_DEVICE); 163 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); 164 setbits_le32(&ehci->portsc, USB_EN); 165 } else if (init == USB_INIT_HOST) { 166 setbits_le32(&ehci->usbmode, CM_HOST); 167 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); 168 setbits_le32(&ehci->portsc, USB_EN); 169 } 170 171 return 0; 172 } 173 174 int ehci_hcd_stop(int index) 175 { 176 return 0; 177 } 178