1 /*- 2 * Copyright (c) 2007-2008, Juniper Networks, Inc. 3 * All rights reserved. 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License as 7 * published by the Free Software Foundation version 2 of 8 * the License. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 18 * MA 02111-1307 USA 19 */ 20 21 #include <common.h> 22 #include <pci.h> 23 #include <usb.h> 24 25 #include "ehci.h" 26 #include "ehci-core.h" 27 28 #ifdef CONFIG_PCI_EHCI_DEVICE 29 static struct pci_device_id ehci_pci_ids[] = { 30 /* Please add supported PCI EHCI controller ids here */ 31 {0, 0} 32 }; 33 #endif 34 35 /* 36 * Create the appropriate control structures to manage 37 * a new EHCI host controller. 38 */ 39 int ehci_hcd_init(void) 40 { 41 pci_dev_t pdev; 42 uint32_t addr; 43 44 pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE); 45 if (pdev == -1) { 46 printf("EHCI host controller not found\n"); 47 return -1; 48 } 49 50 pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &addr); 51 hccr = (struct ehci_hccr *)addr; 52 hcor = (struct ehci_hcor *)((uint32_t) hccr + 53 HC_LENGTH(ehci_readl(&hccr->cr_capbase))); 54 55 return 0; 56 } 57 58 /* 59 * Destroy the appropriate control structures corresponding 60 * the the EHCI host controller. 61 */ 62 int ehci_hcd_stop(void) 63 { 64 return 0; 65 } 66