1 /* 2 * Freescale i.MX28 USB Host driver 3 * 4 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> 5 * on behalf of DENX Software Engineering GmbH 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <asm/io.h> 12 #include <asm/arch/imx-regs.h> 13 #include <errno.h> 14 15 #include "ehci.h" 16 17 /* This DIGCTL register ungates clock to USB */ 18 #define HW_DIGCTL_CTRL 0x8001c000 19 #define HW_DIGCTL_CTRL_USB0_CLKGATE (1 << 2) 20 #define HW_DIGCTL_CTRL_USB1_CLKGATE (1 << 16) 21 22 struct ehci_mxs_port { 23 uint32_t usb_regs; 24 struct mxs_usbphy_regs *phy_regs; 25 26 struct mxs_register_32 *pll; 27 uint32_t pll_en_bits; 28 uint32_t pll_dis_bits; 29 uint32_t gate_bits; 30 }; 31 32 static const struct ehci_mxs_port mxs_port[] = { 33 #ifdef CONFIG_EHCI_MXS_PORT0 34 { 35 MXS_USBCTRL0_BASE, 36 (struct mxs_usbphy_regs *)MXS_USBPHY0_BASE, 37 (struct mxs_register_32 *)(MXS_CLKCTRL_BASE + 38 offsetof(struct mxs_clkctrl_regs, 39 hw_clkctrl_pll0ctrl0_reg)), 40 CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER, 41 CLKCTRL_PLL0CTRL0_EN_USB_CLKS, 42 HW_DIGCTL_CTRL_USB0_CLKGATE, 43 }, 44 #endif 45 #ifdef CONFIG_EHCI_MXS_PORT1 46 { 47 MXS_USBCTRL1_BASE, 48 (struct mxs_usbphy_regs *)MXS_USBPHY1_BASE, 49 (struct mxs_register_32 *)(MXS_CLKCTRL_BASE + 50 offsetof(struct mxs_clkctrl_regs, 51 hw_clkctrl_pll1ctrl0_reg)), 52 CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER, 53 CLKCTRL_PLL1CTRL0_EN_USB_CLKS, 54 HW_DIGCTL_CTRL_USB1_CLKGATE, 55 }, 56 #endif 57 }; 58 59 static int ehci_mxs_toggle_clock(const struct ehci_mxs_port *port, int enable) 60 { 61 struct mxs_register_32 *digctl_ctrl = 62 (struct mxs_register_32 *)HW_DIGCTL_CTRL; 63 int pll_offset, dig_offset; 64 65 if (enable) { 66 pll_offset = offsetof(struct mxs_register_32, reg_set); 67 dig_offset = offsetof(struct mxs_register_32, reg_clr); 68 writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset); 69 writel(port->pll_en_bits, (u32)port->pll + pll_offset); 70 } else { 71 pll_offset = offsetof(struct mxs_register_32, reg_clr); 72 dig_offset = offsetof(struct mxs_register_32, reg_set); 73 writel(port->pll_dis_bits, (u32)port->pll + pll_offset); 74 writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset); 75 } 76 77 return 0; 78 } 79 80 int __weak board_ehci_hcd_init(int port) 81 { 82 return 0; 83 } 84 85 int __weak board_ehci_hcd_exit(int port) 86 { 87 return 0; 88 } 89 90 int ehci_hcd_init(int index, enum usb_init_type init, 91 struct ehci_hccr **hccr, struct ehci_hcor **hcor) 92 { 93 94 int ret; 95 uint32_t usb_base, cap_base; 96 const struct ehci_mxs_port *port; 97 98 if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) { 99 printf("Invalid port index (index = %d)!\n", index); 100 return -EINVAL; 101 } 102 103 ret = board_ehci_hcd_init(index); 104 if (ret) 105 return ret; 106 107 port = &mxs_port[index]; 108 109 /* Reset the PHY block */ 110 writel(USBPHY_CTRL_SFTRST, &port->phy_regs->hw_usbphy_ctrl_set); 111 udelay(10); 112 writel(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE, 113 &port->phy_regs->hw_usbphy_ctrl_clr); 114 115 /* Enable USB clock */ 116 ret = ehci_mxs_toggle_clock(port, 1); 117 if (ret) 118 return ret; 119 120 /* Start USB PHY */ 121 writel(0, &port->phy_regs->hw_usbphy_pwd); 122 123 /* Enable UTMI+ Level 2 and Level 3 compatibility */ 124 writel(USBPHY_CTRL_ENUTMILEVEL3 | USBPHY_CTRL_ENUTMILEVEL2 | 1, 125 &port->phy_regs->hw_usbphy_ctrl_set); 126 127 usb_base = port->usb_regs + 0x100; 128 *hccr = (struct ehci_hccr *)usb_base; 129 130 cap_base = ehci_readl(&(*hccr)->cr_capbase); 131 *hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base)); 132 133 return 0; 134 } 135 136 int ehci_hcd_stop(int index) 137 { 138 int ret; 139 uint32_t usb_base, cap_base, tmp; 140 struct ehci_hccr *hccr; 141 struct ehci_hcor *hcor; 142 const struct ehci_mxs_port *port; 143 144 if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) { 145 printf("Invalid port index (index = %d)!\n", index); 146 return -EINVAL; 147 } 148 149 port = &mxs_port[index]; 150 151 /* Stop the USB port */ 152 usb_base = port->usb_regs + 0x100; 153 hccr = (struct ehci_hccr *)usb_base; 154 cap_base = ehci_readl(&hccr->cr_capbase); 155 hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base)); 156 157 tmp = ehci_readl(&hcor->or_usbcmd); 158 tmp &= ~CMD_RUN; 159 ehci_writel(tmp, &hcor->or_usbcmd); 160 161 /* Disable the PHY */ 162 tmp = USBPHY_PWD_RXPWDRX | USBPHY_PWD_RXPWDDIFF | 163 USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV | 164 USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS | 165 USBPHY_PWD_TXPWDFS; 166 writel(tmp, &port->phy_regs->hw_usbphy_pwd); 167 168 /* Disable USB clock */ 169 ret = ehci_mxs_toggle_clock(port, 0); 170 171 board_ehci_hcd_exit(index); 172 173 return ret; 174 } 175