1 /* 2 * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> 3 * Copyright (C) 2010 Freescale Semiconductor, Inc. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License as published by the 7 * Free Software Foundation; either version 2 of the License, or (at your 8 * option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 13 * for more details. 14 */ 15 16 #include <common.h> 17 #include <usb.h> 18 #include <errno.h> 19 #include <linux/compiler.h> 20 #include <usb/ehci-fsl.h> 21 #include <asm/io.h> 22 #include <asm/arch/imx-regs.h> 23 #include <asm/arch/clock.h> 24 #include <asm/arch/mx5x_pins.h> 25 #include <asm/arch/iomux.h> 26 27 #include "ehci.h" 28 #include "ehci-core.h" 29 30 #define MX5_USBOTHER_REGS_OFFSET 0x800 31 32 33 #define MXC_OTG_OFFSET 0 34 #define MXC_H1_OFFSET 0x200 35 #define MXC_H2_OFFSET 0x400 36 37 #define MXC_USBCTRL_OFFSET 0 38 #define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 39 #define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc 40 #define MXC_USB_CTRL_1_OFFSET 0x10 41 #define MXC_USBH2CTRL_OFFSET 0x14 42 43 /* USB_CTRL */ 44 #define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */ 45 #define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ 46 #define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ 47 #define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ 48 #define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ 49 50 /* USB_PHY_CTRL_FUNC */ 51 #define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ 52 #define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ 53 54 /* USBH2CTRL */ 55 #define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) 56 #define MXC_H2_UCTRL_H2WIE_BIT (1 << 7) 57 #define MXC_H2_UCTRL_H2PM_BIT (1 << 4) 58 59 /* USB_CTRL_1 */ 60 #define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) 61 62 /* USB pin configuration */ 63 #define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \ 64 PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU | \ 65 PAD_CTL_HYS_ENABLE | PAD_CTL_PUE_PULL) 66 67 #ifdef CONFIG_MX51 68 /* 69 * Configure the MX51 USB H1 IOMUX 70 */ 71 void setup_iomux_usb_h1(void) 72 { 73 mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0); 74 mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USB_PAD_CONFIG); 75 mxc_request_iomux(MX51_PIN_USBH1_CLK, IOMUX_CONFIG_ALT0); 76 mxc_iomux_set_pad(MX51_PIN_USBH1_CLK, USB_PAD_CONFIG); 77 mxc_request_iomux(MX51_PIN_USBH1_DIR, IOMUX_CONFIG_ALT0); 78 mxc_iomux_set_pad(MX51_PIN_USBH1_DIR, USB_PAD_CONFIG); 79 mxc_request_iomux(MX51_PIN_USBH1_NXT, IOMUX_CONFIG_ALT0); 80 mxc_iomux_set_pad(MX51_PIN_USBH1_NXT, USB_PAD_CONFIG); 81 82 mxc_request_iomux(MX51_PIN_USBH1_DATA0, IOMUX_CONFIG_ALT0); 83 mxc_iomux_set_pad(MX51_PIN_USBH1_DATA0, USB_PAD_CONFIG); 84 mxc_request_iomux(MX51_PIN_USBH1_DATA1, IOMUX_CONFIG_ALT0); 85 mxc_iomux_set_pad(MX51_PIN_USBH1_DATA1, USB_PAD_CONFIG); 86 mxc_request_iomux(MX51_PIN_USBH1_DATA2, IOMUX_CONFIG_ALT0); 87 mxc_iomux_set_pad(MX51_PIN_USBH1_DATA2, USB_PAD_CONFIG); 88 mxc_request_iomux(MX51_PIN_USBH1_DATA3, IOMUX_CONFIG_ALT0); 89 mxc_iomux_set_pad(MX51_PIN_USBH1_DATA3, USB_PAD_CONFIG); 90 mxc_request_iomux(MX51_PIN_USBH1_DATA4, IOMUX_CONFIG_ALT0); 91 mxc_iomux_set_pad(MX51_PIN_USBH1_DATA4, USB_PAD_CONFIG); 92 mxc_request_iomux(MX51_PIN_USBH1_DATA5, IOMUX_CONFIG_ALT0); 93 mxc_iomux_set_pad(MX51_PIN_USBH1_DATA5, USB_PAD_CONFIG); 94 mxc_request_iomux(MX51_PIN_USBH1_DATA6, IOMUX_CONFIG_ALT0); 95 mxc_iomux_set_pad(MX51_PIN_USBH1_DATA6, USB_PAD_CONFIG); 96 mxc_request_iomux(MX51_PIN_USBH1_DATA7, IOMUX_CONFIG_ALT0); 97 mxc_iomux_set_pad(MX51_PIN_USBH1_DATA7, USB_PAD_CONFIG); 98 } 99 100 /* 101 * Configure the MX51 USB H2 IOMUX 102 */ 103 void setup_iomux_usb_h2(void) 104 { 105 mxc_request_iomux(MX51_PIN_EIM_A24, IOMUX_CONFIG_ALT2); 106 mxc_iomux_set_pad(MX51_PIN_EIM_A24, USB_PAD_CONFIG); 107 mxc_request_iomux(MX51_PIN_EIM_A25, IOMUX_CONFIG_ALT2); 108 mxc_iomux_set_pad(MX51_PIN_EIM_A25, USB_PAD_CONFIG); 109 mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_ALT2); 110 mxc_iomux_set_pad(MX51_PIN_EIM_A26, USB_PAD_CONFIG); 111 mxc_request_iomux(MX51_PIN_EIM_A27, IOMUX_CONFIG_ALT2); 112 mxc_iomux_set_pad(MX51_PIN_EIM_A27, USB_PAD_CONFIG); 113 114 mxc_request_iomux(MX51_PIN_EIM_D16, IOMUX_CONFIG_ALT2); 115 mxc_iomux_set_pad(MX51_PIN_EIM_D16, USB_PAD_CONFIG); 116 mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT2); 117 mxc_iomux_set_pad(MX51_PIN_EIM_D17, USB_PAD_CONFIG); 118 mxc_request_iomux(MX51_PIN_EIM_D18, IOMUX_CONFIG_ALT2); 119 mxc_iomux_set_pad(MX51_PIN_EIM_D18, USB_PAD_CONFIG); 120 mxc_request_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_ALT2); 121 mxc_iomux_set_pad(MX51_PIN_EIM_D19, USB_PAD_CONFIG); 122 mxc_request_iomux(MX51_PIN_EIM_D20, IOMUX_CONFIG_ALT2); 123 mxc_iomux_set_pad(MX51_PIN_EIM_D20, USB_PAD_CONFIG); 124 mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2); 125 mxc_iomux_set_pad(MX51_PIN_EIM_D21, USB_PAD_CONFIG); 126 mxc_request_iomux(MX51_PIN_EIM_D22, IOMUX_CONFIG_ALT2); 127 mxc_iomux_set_pad(MX51_PIN_EIM_D22, USB_PAD_CONFIG); 128 mxc_request_iomux(MX51_PIN_EIM_D23, IOMUX_CONFIG_ALT2); 129 mxc_iomux_set_pad(MX51_PIN_EIM_D23, USB_PAD_CONFIG); 130 } 131 #endif 132 133 int mxc_set_usbcontrol(int port, unsigned int flags) 134 { 135 unsigned int v; 136 void __iomem *usb_base = (void __iomem *)OTG_BASE_ADDR; 137 void __iomem *usbother_base; 138 int ret = 0; 139 140 usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; 141 142 switch (port) { 143 case 0: /* OTG port */ 144 if (flags & MXC_EHCI_INTERNAL_PHY) { 145 v = __raw_readl(usbother_base + 146 MXC_USB_PHY_CTR_FUNC_OFFSET); 147 if (flags & MXC_EHCI_POWER_PINS_ENABLED) 148 /* OC/USBPWR is not used */ 149 v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; 150 else 151 /* OC/USBPWR is used */ 152 v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; 153 __raw_writel(v, usbother_base + 154 MXC_USB_PHY_CTR_FUNC_OFFSET); 155 156 v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); 157 if (flags & MXC_EHCI_POWER_PINS_ENABLED) 158 v |= MXC_OTG_UCTRL_OPM_BIT; 159 else 160 v &= ~MXC_OTG_UCTRL_OPM_BIT; 161 __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); 162 } 163 break; 164 case 1: /* Host 1 Host ULPI */ 165 #ifdef CONFIG_MX51 166 /* The clock for the USBH1 ULPI port will come externally 167 from the PHY. */ 168 v = __raw_readl(usbother_base + MXC_USB_CTRL_1_OFFSET); 169 __raw_writel(v | MXC_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + 170 MXC_USB_CTRL_1_OFFSET); 171 #endif 172 173 v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); 174 if (flags & MXC_EHCI_POWER_PINS_ENABLED) 175 v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used */ 176 else 177 v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used */ 178 __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); 179 180 v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); 181 if (flags & MXC_EHCI_POWER_PINS_ENABLED) 182 v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ 183 else 184 v |= MXC_H1_OC_DIS_BIT; /* OC is not used */ 185 __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); 186 187 break; 188 case 2: /* Host 2 ULPI */ 189 v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET); 190 if (flags & MXC_EHCI_POWER_PINS_ENABLED) 191 v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used */ 192 else 193 v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used */ 194 195 __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); 196 break; 197 } 198 199 return ret; 200 } 201 202 void __board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) 203 { 204 } 205 206 void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) 207 __attribute((weak, alias("__board_ehci_hcd_postinit"))); 208 209 int ehci_hcd_init(void) 210 { 211 struct usb_ehci *ehci; 212 #ifdef CONFIG_MX53 213 struct clkctl *sc_regs = (struct clkctl *)CCM_BASE_ADDR; 214 u32 reg; 215 216 reg = __raw_readl(&sc_regs->cscmr1) & ~(1 << 26); 217 /* derive USB PHY clock multiplexer from PLL3 */ 218 reg |= 1 << 26; 219 __raw_writel(reg, &sc_regs->cscmr1); 220 #endif 221 222 set_usboh3_clk(); 223 enable_usboh3_clk(1); 224 set_usb_phy2_clk(); 225 enable_usb_phy2_clk(1); 226 mdelay(1); 227 228 /* Do board specific initialization */ 229 board_ehci_hcd_init(CONFIG_MXC_USB_PORT); 230 231 ehci = (struct usb_ehci *)(OTG_BASE_ADDR + 232 (0x200 * CONFIG_MXC_USB_PORT)); 233 hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); 234 hcor = (struct ehci_hcor *)((uint32_t)hccr + 235 HC_LENGTH(ehci_readl(&hccr->cr_capbase))); 236 setbits_le32(&ehci->usbmode, CM_HOST); 237 238 __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc); 239 setbits_le32(&ehci->portsc, USB_EN); 240 241 mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS); 242 mdelay(10); 243 244 /* Do board specific post-initialization */ 245 board_ehci_hcd_postinit(ehci, CONFIG_MXC_USB_PORT); 246 247 return 0; 248 } 249 250 int ehci_hcd_stop(void) 251 { 252 return 0; 253 } 254 255 256