xref: /openbmc/u-boot/drivers/usb/host/ehci-marvell.c (revision 4381aad9)
1 /*
2  * (C) Copyright 2009
3  * Marvell Semiconductor <www.marvell.com>
4  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #include <common.h>
10 #include <asm/io.h>
11 #include <usb.h>
12 #include "ehci.h"
13 #include <asm/arch/cpu.h>
14 
15 #if defined(CONFIG_KIRKWOOD)
16 #include <asm/arch/soc.h>
17 #elif defined(CONFIG_ORION5X)
18 #include <asm/arch/orion5x.h>
19 #endif
20 
21 DECLARE_GLOBAL_DATA_PTR;
22 
23 #define rdl(off)	readl(MVUSB0_BASE + (off))
24 #define wrl(off, val)	writel((val), MVUSB0_BASE + (off))
25 
26 #define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
27 #define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
28 #define USB_TARGET_DRAM		0x0
29 
30 /*
31  * USB 2.0 Bridge Address Decoding registers setup
32  */
33 static void usb_brg_adrdec_setup(void)
34 {
35 	int i;
36 	u32 size, base, attrib;
37 
38 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
39 
40 		/* Enable DRAM bank */
41 		switch (i) {
42 		case 0:
43 			attrib = MVUSB0_CPU_ATTR_DRAM_CS0;
44 			break;
45 		case 1:
46 			attrib = MVUSB0_CPU_ATTR_DRAM_CS1;
47 			break;
48 		case 2:
49 			attrib = MVUSB0_CPU_ATTR_DRAM_CS2;
50 			break;
51 		case 3:
52 			attrib = MVUSB0_CPU_ATTR_DRAM_CS3;
53 			break;
54 		default:
55 			/* invalide bank, disable access */
56 			attrib = 0;
57 			break;
58 		}
59 
60 		size = gd->bd->bi_dram[i].size;
61 		base = gd->bd->bi_dram[i].start;
62 		if ((size) && (attrib))
63 			wrl(USB_WINDOW_CTRL(i),
64 				MVCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM,
65 					attrib, MVCPU_WIN_ENABLE));
66 		else
67 			wrl(USB_WINDOW_CTRL(i), MVCPU_WIN_DISABLE);
68 
69 		wrl(USB_WINDOW_BASE(i), base);
70 	}
71 }
72 
73 /*
74  * Create the appropriate control structures to manage
75  * a new EHCI host controller.
76  */
77 int ehci_hcd_init(int index, enum usb_init_type init,
78 		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
79 {
80 	usb_brg_adrdec_setup();
81 
82 	*hccr = (struct ehci_hccr *)(MVUSB0_BASE + 0x100);
83 	*hcor = (struct ehci_hcor *)((uint32_t) *hccr
84 			+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
85 
86 	debug("ehci-marvell: init hccr %x and hcor %x hc_length %d\n",
87 		(uint32_t)*hccr, (uint32_t)*hcor,
88 		(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
89 
90 	return 0;
91 }
92 
93 /*
94  * Destroy the appropriate control structures corresponding
95  * the the EHCI host controller.
96  */
97 int ehci_hcd_stop(int index)
98 {
99 	return 0;
100 }
101