1 // SPDX-License-Identifier: GPL-2.0 2 /*- 3 * Copyright (c) 2007-2008, Juniper Networks, Inc. 4 * Copyright (c) 2008, Excito Elektronik i Skåne AB 5 * Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it> 6 * 7 * All rights reserved. 8 */ 9 #include <common.h> 10 #include <dm.h> 11 #include <errno.h> 12 #include <asm/byteorder.h> 13 #include <asm/unaligned.h> 14 #include <usb.h> 15 #include <asm/io.h> 16 #include <malloc.h> 17 #include <memalign.h> 18 #include <watchdog.h> 19 #include <linux/compiler.h> 20 21 #include "ehci.h" 22 23 #ifndef CONFIG_USB_MAX_CONTROLLER_COUNT 24 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 25 #endif 26 27 /* 28 * EHCI spec page 20 says that the HC may take up to 16 uFrames (= 4ms) to halt. 29 * Let's time out after 8 to have a little safety margin on top of that. 30 */ 31 #define HCHALT_TIMEOUT (8 * 1000) 32 33 #ifndef CONFIG_DM_USB 34 static struct ehci_ctrl ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT]; 35 #endif 36 37 #define ALIGN_END_ADDR(type, ptr, size) \ 38 ((unsigned long)(ptr) + roundup((size) * sizeof(type), USB_DMA_MINALIGN)) 39 40 static struct descriptor { 41 struct usb_hub_descriptor hub; 42 struct usb_device_descriptor device; 43 struct usb_linux_config_descriptor config; 44 struct usb_linux_interface_descriptor interface; 45 struct usb_endpoint_descriptor endpoint; 46 } __attribute__ ((packed)) descriptor = { 47 { 48 0x8, /* bDescLength */ 49 0x29, /* bDescriptorType: hub descriptor */ 50 2, /* bNrPorts -- runtime modified */ 51 0, /* wHubCharacteristics */ 52 10, /* bPwrOn2PwrGood */ 53 0, /* bHubCntrCurrent */ 54 { /* Device removable */ 55 } /* at most 7 ports! XXX */ 56 }, 57 { 58 0x12, /* bLength */ 59 1, /* bDescriptorType: UDESC_DEVICE */ 60 cpu_to_le16(0x0200), /* bcdUSB: v2.0 */ 61 9, /* bDeviceClass: UDCLASS_HUB */ 62 0, /* bDeviceSubClass: UDSUBCLASS_HUB */ 63 1, /* bDeviceProtocol: UDPROTO_HSHUBSTT */ 64 64, /* bMaxPacketSize: 64 bytes */ 65 0x0000, /* idVendor */ 66 0x0000, /* idProduct */ 67 cpu_to_le16(0x0100), /* bcdDevice */ 68 1, /* iManufacturer */ 69 2, /* iProduct */ 70 0, /* iSerialNumber */ 71 1 /* bNumConfigurations: 1 */ 72 }, 73 { 74 0x9, 75 2, /* bDescriptorType: UDESC_CONFIG */ 76 cpu_to_le16(0x19), 77 1, /* bNumInterface */ 78 1, /* bConfigurationValue */ 79 0, /* iConfiguration */ 80 0x40, /* bmAttributes: UC_SELF_POWER */ 81 0 /* bMaxPower */ 82 }, 83 { 84 0x9, /* bLength */ 85 4, /* bDescriptorType: UDESC_INTERFACE */ 86 0, /* bInterfaceNumber */ 87 0, /* bAlternateSetting */ 88 1, /* bNumEndpoints */ 89 9, /* bInterfaceClass: UICLASS_HUB */ 90 0, /* bInterfaceSubClass: UISUBCLASS_HUB */ 91 0, /* bInterfaceProtocol: UIPROTO_HSHUBSTT */ 92 0 /* iInterface */ 93 }, 94 { 95 0x7, /* bLength */ 96 5, /* bDescriptorType: UDESC_ENDPOINT */ 97 0x81, /* bEndpointAddress: 98 * UE_DIR_IN | EHCI_INTR_ENDPT 99 */ 100 3, /* bmAttributes: UE_INTERRUPT */ 101 8, /* wMaxPacketSize */ 102 255 /* bInterval */ 103 }, 104 }; 105 106 #if defined(CONFIG_EHCI_IS_TDI) 107 #define ehci_is_TDI() (1) 108 #else 109 #define ehci_is_TDI() (0) 110 #endif 111 112 static struct ehci_ctrl *ehci_get_ctrl(struct usb_device *udev) 113 { 114 #ifdef CONFIG_DM_USB 115 return dev_get_priv(usb_get_bus(udev->dev)); 116 #else 117 return udev->controller; 118 #endif 119 } 120 121 static int ehci_get_port_speed(struct ehci_ctrl *ctrl, uint32_t reg) 122 { 123 return PORTSC_PSPD(reg); 124 } 125 126 static void ehci_set_usbmode(struct ehci_ctrl *ctrl) 127 { 128 uint32_t tmp; 129 uint32_t *reg_ptr; 130 131 reg_ptr = (uint32_t *)((u8 *)&ctrl->hcor->or_usbcmd + USBMODE); 132 tmp = ehci_readl(reg_ptr); 133 tmp |= USBMODE_CM_HC; 134 #if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN) 135 tmp |= USBMODE_BE; 136 #else 137 tmp &= ~USBMODE_BE; 138 #endif 139 ehci_writel(reg_ptr, tmp); 140 } 141 142 static void ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg, 143 uint32_t *reg) 144 { 145 mdelay(50); 146 } 147 148 static uint32_t *ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port) 149 { 150 int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams)); 151 152 if (port < 0 || port >= max_ports) { 153 /* Printing the message would cause a scan failure! */ 154 debug("The request port(%u) exceeds maximum port number\n", 155 port); 156 return NULL; 157 } 158 159 return (uint32_t *)&ctrl->hcor->or_portsc[port]; 160 } 161 162 static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) 163 { 164 uint32_t result; 165 do { 166 result = ehci_readl(ptr); 167 udelay(5); 168 if (result == ~(uint32_t)0) 169 return -1; 170 result &= mask; 171 if (result == done) 172 return 0; 173 usec--; 174 } while (usec > 0); 175 return -1; 176 } 177 178 static int ehci_reset(struct ehci_ctrl *ctrl) 179 { 180 uint32_t cmd; 181 int ret = 0; 182 183 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 184 cmd = (cmd & ~CMD_RUN) | CMD_RESET; 185 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 186 ret = handshake((uint32_t *)&ctrl->hcor->or_usbcmd, 187 CMD_RESET, 0, 250 * 1000); 188 if (ret < 0) { 189 printf("EHCI fail to reset\n"); 190 goto out; 191 } 192 193 if (ehci_is_TDI()) 194 ctrl->ops.set_usb_mode(ctrl); 195 196 #ifdef CONFIG_USB_EHCI_TXFIFO_THRESH 197 cmd = ehci_readl(&ctrl->hcor->or_txfilltuning); 198 cmd &= ~TXFIFO_THRESH_MASK; 199 cmd |= TXFIFO_THRESH(CONFIG_USB_EHCI_TXFIFO_THRESH); 200 ehci_writel(&ctrl->hcor->or_txfilltuning, cmd); 201 #endif 202 out: 203 return ret; 204 } 205 206 static int ehci_shutdown(struct ehci_ctrl *ctrl) 207 { 208 int i, ret = 0; 209 uint32_t cmd, reg; 210 int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams)); 211 212 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 213 /* If not run, directly return */ 214 if (!(cmd & CMD_RUN)) 215 return 0; 216 cmd &= ~(CMD_PSE | CMD_ASE); 217 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 218 ret = handshake(&ctrl->hcor->or_usbsts, STS_ASS | STS_PSS, 0, 219 100 * 1000); 220 221 if (!ret) { 222 for (i = 0; i < max_ports; i++) { 223 reg = ehci_readl(&ctrl->hcor->or_portsc[i]); 224 reg |= EHCI_PS_SUSP; 225 ehci_writel(&ctrl->hcor->or_portsc[i], reg); 226 } 227 228 cmd &= ~CMD_RUN; 229 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 230 ret = handshake(&ctrl->hcor->or_usbsts, STS_HALT, STS_HALT, 231 HCHALT_TIMEOUT); 232 } 233 234 if (ret) 235 puts("EHCI failed to shut down host controller.\n"); 236 237 return ret; 238 } 239 240 static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz) 241 { 242 uint32_t delta, next; 243 unsigned long addr = (unsigned long)buf; 244 int idx; 245 246 if (addr != ALIGN(addr, ARCH_DMA_MINALIGN)) 247 debug("EHCI-HCD: Misaligned buffer address (%p)\n", buf); 248 249 flush_dcache_range(addr, ALIGN(addr + sz, ARCH_DMA_MINALIGN)); 250 251 idx = 0; 252 while (idx < QT_BUFFER_CNT) { 253 td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys((void *)addr)); 254 td->qt_buffer_hi[idx] = 0; 255 next = (addr + EHCI_PAGE_SIZE) & ~(EHCI_PAGE_SIZE - 1); 256 delta = next - addr; 257 if (delta >= sz) 258 break; 259 sz -= delta; 260 addr = next; 261 idx++; 262 } 263 264 if (idx == QT_BUFFER_CNT) { 265 printf("out of buffer pointers (%zu bytes left)\n", sz); 266 return -1; 267 } 268 269 return 0; 270 } 271 272 static inline u8 ehci_encode_speed(enum usb_device_speed speed) 273 { 274 #define QH_HIGH_SPEED 2 275 #define QH_FULL_SPEED 0 276 #define QH_LOW_SPEED 1 277 if (speed == USB_SPEED_HIGH) 278 return QH_HIGH_SPEED; 279 if (speed == USB_SPEED_LOW) 280 return QH_LOW_SPEED; 281 return QH_FULL_SPEED; 282 } 283 284 static void ehci_update_endpt2_dev_n_port(struct usb_device *udev, 285 struct QH *qh) 286 { 287 uint8_t portnr = 0; 288 uint8_t hubaddr = 0; 289 290 if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL) 291 return; 292 293 usb_find_usb2_hub_address_port(udev, &hubaddr, &portnr); 294 295 qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(portnr) | 296 QH_ENDPT2_HUBADDR(hubaddr)); 297 } 298 299 static int 300 ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, 301 int length, struct devrequest *req) 302 { 303 ALLOC_ALIGN_BUFFER(struct QH, qh, 1, USB_DMA_MINALIGN); 304 struct qTD *qtd; 305 int qtd_count = 0; 306 int qtd_counter = 0; 307 volatile struct qTD *vtd; 308 unsigned long ts; 309 uint32_t *tdp; 310 uint32_t endpt, maxpacket, token, usbsts; 311 uint32_t c, toggle; 312 uint32_t cmd; 313 int timeout; 314 int ret = 0; 315 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 316 317 debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n", dev, pipe, 318 buffer, length, req); 319 if (req != NULL) 320 debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n", 321 req->request, req->request, 322 req->requesttype, req->requesttype, 323 le16_to_cpu(req->value), le16_to_cpu(req->value), 324 le16_to_cpu(req->index)); 325 326 #define PKT_ALIGN 512 327 /* 328 * The USB transfer is split into qTD transfers. Eeach qTD transfer is 329 * described by a transfer descriptor (the qTD). The qTDs form a linked 330 * list with a queue head (QH). 331 * 332 * Each qTD transfer starts with a new USB packet, i.e. a packet cannot 333 * have its beginning in a qTD transfer and its end in the following 334 * one, so the qTD transfer lengths have to be chosen accordingly. 335 * 336 * Each qTD transfer uses up to QT_BUFFER_CNT data buffers, mapped to 337 * single pages. The first data buffer can start at any offset within a 338 * page (not considering the cache-line alignment issues), while the 339 * following buffers must be page-aligned. There is no alignment 340 * constraint on the size of a qTD transfer. 341 */ 342 if (req != NULL) 343 /* 1 qTD will be needed for SETUP, and 1 for ACK. */ 344 qtd_count += 1 + 1; 345 if (length > 0 || req == NULL) { 346 /* 347 * Determine the qTD transfer size that will be used for the 348 * data payload (not considering the first qTD transfer, which 349 * may be longer or shorter, and the final one, which may be 350 * shorter). 351 * 352 * In order to keep each packet within a qTD transfer, the qTD 353 * transfer size is aligned to PKT_ALIGN, which is a multiple of 354 * wMaxPacketSize (except in some cases for interrupt transfers, 355 * see comment in submit_int_msg()). 356 * 357 * By default, i.e. if the input buffer is aligned to PKT_ALIGN, 358 * QT_BUFFER_CNT full pages will be used. 359 */ 360 int xfr_sz = QT_BUFFER_CNT; 361 /* 362 * However, if the input buffer is not aligned to PKT_ALIGN, the 363 * qTD transfer size will be one page shorter, and the first qTD 364 * data buffer of each transfer will be page-unaligned. 365 */ 366 if ((unsigned long)buffer & (PKT_ALIGN - 1)) 367 xfr_sz--; 368 /* Convert the qTD transfer size to bytes. */ 369 xfr_sz *= EHCI_PAGE_SIZE; 370 /* 371 * Approximate by excess the number of qTDs that will be 372 * required for the data payload. The exact formula is way more 373 * complicated and saves at most 2 qTDs, i.e. a total of 128 374 * bytes. 375 */ 376 qtd_count += 2 + length / xfr_sz; 377 } 378 /* 379 * Threshold value based on the worst-case total size of the allocated qTDs for 380 * a mass-storage transfer of 65535 blocks of 512 bytes. 381 */ 382 #if CONFIG_SYS_MALLOC_LEN <= 64 + 128 * 1024 383 #warning CONFIG_SYS_MALLOC_LEN may be too small for EHCI 384 #endif 385 qtd = memalign(USB_DMA_MINALIGN, qtd_count * sizeof(struct qTD)); 386 if (qtd == NULL) { 387 printf("unable to allocate TDs\n"); 388 return -1; 389 } 390 391 memset(qh, 0, sizeof(struct QH)); 392 memset(qtd, 0, qtd_count * sizeof(*qtd)); 393 394 toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); 395 396 /* 397 * Setup QH (3.6 in ehci-r10.pdf) 398 * 399 * qh_link ................. 03-00 H 400 * qh_endpt1 ............... 07-04 H 401 * qh_endpt2 ............... 0B-08 H 402 * - qh_curtd 403 * qh_overlay.qt_next ...... 13-10 H 404 * - qh_overlay.qt_altnext 405 */ 406 qh->qh_link = cpu_to_hc32(virt_to_phys(&ctrl->qh_list) | QH_LINK_TYPE_QH); 407 c = (dev->speed != USB_SPEED_HIGH) && !usb_pipeendpoint(pipe); 408 maxpacket = usb_maxpacket(dev, pipe); 409 endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) | 410 QH_ENDPT1_MAXPKTLEN(maxpacket) | QH_ENDPT1_H(0) | 411 QH_ENDPT1_DTC(QH_ENDPT1_DTC_DT_FROM_QTD) | 412 QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) | 413 QH_ENDPT1_ENDPT(usb_pipeendpoint(pipe)) | QH_ENDPT1_I(0) | 414 QH_ENDPT1_DEVADDR(usb_pipedevice(pipe)); 415 qh->qh_endpt1 = cpu_to_hc32(endpt); 416 endpt = QH_ENDPT2_MULT(1) | QH_ENDPT2_UFCMASK(0) | QH_ENDPT2_UFSMASK(0); 417 qh->qh_endpt2 = cpu_to_hc32(endpt); 418 ehci_update_endpt2_dev_n_port(dev, qh); 419 qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 420 qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 421 422 tdp = &qh->qh_overlay.qt_next; 423 if (req != NULL) { 424 /* 425 * Setup request qTD (3.5 in ehci-r10.pdf) 426 * 427 * qt_next ................ 03-00 H 428 * qt_altnext ............. 07-04 H 429 * qt_token ............... 0B-08 H 430 * 431 * [ buffer, buffer_hi ] loaded with "req". 432 */ 433 qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 434 qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 435 token = QT_TOKEN_DT(0) | QT_TOKEN_TOTALBYTES(sizeof(*req)) | 436 QT_TOKEN_IOC(0) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | 437 QT_TOKEN_PID(QT_TOKEN_PID_SETUP) | 438 QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); 439 qtd[qtd_counter].qt_token = cpu_to_hc32(token); 440 if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req))) { 441 printf("unable to construct SETUP TD\n"); 442 goto fail; 443 } 444 /* Update previous qTD! */ 445 *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); 446 tdp = &qtd[qtd_counter++].qt_next; 447 toggle = 1; 448 } 449 450 if (length > 0 || req == NULL) { 451 uint8_t *buf_ptr = buffer; 452 int left_length = length; 453 454 do { 455 /* 456 * Determine the size of this qTD transfer. By default, 457 * QT_BUFFER_CNT full pages can be used. 458 */ 459 int xfr_bytes = QT_BUFFER_CNT * EHCI_PAGE_SIZE; 460 /* 461 * However, if the input buffer is not page-aligned, the 462 * portion of the first page before the buffer start 463 * offset within that page is unusable. 464 */ 465 xfr_bytes -= (unsigned long)buf_ptr & (EHCI_PAGE_SIZE - 1); 466 /* 467 * In order to keep each packet within a qTD transfer, 468 * align the qTD transfer size to PKT_ALIGN. 469 */ 470 xfr_bytes &= ~(PKT_ALIGN - 1); 471 /* 472 * This transfer may be shorter than the available qTD 473 * transfer size that has just been computed. 474 */ 475 xfr_bytes = min(xfr_bytes, left_length); 476 477 /* 478 * Setup request qTD (3.5 in ehci-r10.pdf) 479 * 480 * qt_next ................ 03-00 H 481 * qt_altnext ............. 07-04 H 482 * qt_token ............... 0B-08 H 483 * 484 * [ buffer, buffer_hi ] loaded with "buffer". 485 */ 486 qtd[qtd_counter].qt_next = 487 cpu_to_hc32(QT_NEXT_TERMINATE); 488 qtd[qtd_counter].qt_altnext = 489 cpu_to_hc32(QT_NEXT_TERMINATE); 490 token = QT_TOKEN_DT(toggle) | 491 QT_TOKEN_TOTALBYTES(xfr_bytes) | 492 QT_TOKEN_IOC(req == NULL) | QT_TOKEN_CPAGE(0) | 493 QT_TOKEN_CERR(3) | 494 QT_TOKEN_PID(usb_pipein(pipe) ? 495 QT_TOKEN_PID_IN : QT_TOKEN_PID_OUT) | 496 QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); 497 qtd[qtd_counter].qt_token = cpu_to_hc32(token); 498 if (ehci_td_buffer(&qtd[qtd_counter], buf_ptr, 499 xfr_bytes)) { 500 printf("unable to construct DATA TD\n"); 501 goto fail; 502 } 503 /* Update previous qTD! */ 504 *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); 505 tdp = &qtd[qtd_counter++].qt_next; 506 /* 507 * Data toggle has to be adjusted since the qTD transfer 508 * size is not always an even multiple of 509 * wMaxPacketSize. 510 */ 511 if ((xfr_bytes / maxpacket) & 1) 512 toggle ^= 1; 513 buf_ptr += xfr_bytes; 514 left_length -= xfr_bytes; 515 } while (left_length > 0); 516 } 517 518 if (req != NULL) { 519 /* 520 * Setup request qTD (3.5 in ehci-r10.pdf) 521 * 522 * qt_next ................ 03-00 H 523 * qt_altnext ............. 07-04 H 524 * qt_token ............... 0B-08 H 525 */ 526 qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 527 qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 528 token = QT_TOKEN_DT(1) | QT_TOKEN_TOTALBYTES(0) | 529 QT_TOKEN_IOC(1) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | 530 QT_TOKEN_PID(usb_pipein(pipe) ? 531 QT_TOKEN_PID_OUT : QT_TOKEN_PID_IN) | 532 QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); 533 qtd[qtd_counter].qt_token = cpu_to_hc32(token); 534 /* Update previous qTD! */ 535 *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); 536 tdp = &qtd[qtd_counter++].qt_next; 537 } 538 539 ctrl->qh_list.qh_link = cpu_to_hc32(virt_to_phys(qh) | QH_LINK_TYPE_QH); 540 541 /* Flush dcache */ 542 flush_dcache_range((unsigned long)&ctrl->qh_list, 543 ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1)); 544 flush_dcache_range((unsigned long)qh, ALIGN_END_ADDR(struct QH, qh, 1)); 545 flush_dcache_range((unsigned long)qtd, 546 ALIGN_END_ADDR(struct qTD, qtd, qtd_count)); 547 548 /* Set async. queue head pointer. */ 549 ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(&ctrl->qh_list)); 550 551 usbsts = ehci_readl(&ctrl->hcor->or_usbsts); 552 ehci_writel(&ctrl->hcor->or_usbsts, (usbsts & 0x3f)); 553 554 /* Enable async. schedule. */ 555 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 556 cmd |= CMD_ASE; 557 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 558 559 ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, STS_ASS, 560 100 * 1000); 561 if (ret < 0) { 562 printf("EHCI fail timeout STS_ASS set\n"); 563 goto fail; 564 } 565 566 /* Wait for TDs to be processed. */ 567 ts = get_timer(0); 568 vtd = &qtd[qtd_counter - 1]; 569 timeout = USB_TIMEOUT_MS(pipe); 570 do { 571 /* Invalidate dcache */ 572 invalidate_dcache_range((unsigned long)&ctrl->qh_list, 573 ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1)); 574 invalidate_dcache_range((unsigned long)qh, 575 ALIGN_END_ADDR(struct QH, qh, 1)); 576 invalidate_dcache_range((unsigned long)qtd, 577 ALIGN_END_ADDR(struct qTD, qtd, qtd_count)); 578 579 token = hc32_to_cpu(vtd->qt_token); 580 if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) 581 break; 582 WATCHDOG_RESET(); 583 } while (get_timer(ts) < timeout); 584 585 /* 586 * Invalidate the memory area occupied by buffer 587 * Don't try to fix the buffer alignment, if it isn't properly 588 * aligned it's upper layer's fault so let invalidate_dcache_range() 589 * vow about it. But we have to fix the length as it's actual 590 * transfer length and can be unaligned. This is potentially 591 * dangerous operation, it's responsibility of the calling 592 * code to make sure enough space is reserved. 593 */ 594 if (buffer != NULL && length > 0) 595 invalidate_dcache_range((unsigned long)buffer, 596 ALIGN((unsigned long)buffer + length, ARCH_DMA_MINALIGN)); 597 598 /* Check that the TD processing happened */ 599 if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) 600 printf("EHCI timed out on TD - token=%#x\n", token); 601 602 /* Disable async schedule. */ 603 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 604 cmd &= ~CMD_ASE; 605 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 606 607 ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, 0, 608 100 * 1000); 609 if (ret < 0) { 610 printf("EHCI fail timeout STS_ASS reset\n"); 611 goto fail; 612 } 613 614 token = hc32_to_cpu(qh->qh_overlay.qt_token); 615 if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) { 616 debug("TOKEN=%#x\n", token); 617 switch (QT_TOKEN_GET_STATUS(token) & 618 ~(QT_TOKEN_STATUS_SPLITXSTATE | QT_TOKEN_STATUS_PERR)) { 619 case 0: 620 toggle = QT_TOKEN_GET_DT(token); 621 usb_settoggle(dev, usb_pipeendpoint(pipe), 622 usb_pipeout(pipe), toggle); 623 dev->status = 0; 624 break; 625 case QT_TOKEN_STATUS_HALTED: 626 dev->status = USB_ST_STALLED; 627 break; 628 case QT_TOKEN_STATUS_ACTIVE | QT_TOKEN_STATUS_DATBUFERR: 629 case QT_TOKEN_STATUS_DATBUFERR: 630 dev->status = USB_ST_BUF_ERR; 631 break; 632 case QT_TOKEN_STATUS_HALTED | QT_TOKEN_STATUS_BABBLEDET: 633 case QT_TOKEN_STATUS_BABBLEDET: 634 dev->status = USB_ST_BABBLE_DET; 635 break; 636 default: 637 dev->status = USB_ST_CRC_ERR; 638 if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_HALTED) 639 dev->status |= USB_ST_STALLED; 640 break; 641 } 642 dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token); 643 } else { 644 dev->act_len = 0; 645 #ifndef CONFIG_USB_EHCI_FARADAY 646 debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n", 647 dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts), 648 ehci_readl(&ctrl->hcor->or_portsc[0]), 649 ehci_readl(&ctrl->hcor->or_portsc[1])); 650 #endif 651 } 652 653 free(qtd); 654 return (dev->status != USB_ST_NOT_PROC) ? 0 : -1; 655 656 fail: 657 free(qtd); 658 return -1; 659 } 660 661 static int ehci_submit_root(struct usb_device *dev, unsigned long pipe, 662 void *buffer, int length, struct devrequest *req) 663 { 664 uint8_t tmpbuf[4]; 665 u16 typeReq; 666 void *srcptr = NULL; 667 int len, srclen; 668 uint32_t reg; 669 uint32_t *status_reg; 670 int port = le16_to_cpu(req->index) & 0xff; 671 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 672 673 srclen = 0; 674 675 debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n", 676 req->request, req->request, 677 req->requesttype, req->requesttype, 678 le16_to_cpu(req->value), le16_to_cpu(req->index)); 679 680 typeReq = req->request | req->requesttype << 8; 681 682 switch (typeReq) { 683 case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8): 684 case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 685 case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 686 status_reg = ctrl->ops.get_portsc_register(ctrl, port - 1); 687 if (!status_reg) 688 return -1; 689 break; 690 default: 691 status_reg = NULL; 692 break; 693 } 694 695 switch (typeReq) { 696 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 697 switch (le16_to_cpu(req->value) >> 8) { 698 case USB_DT_DEVICE: 699 debug("USB_DT_DEVICE request\n"); 700 srcptr = &descriptor.device; 701 srclen = descriptor.device.bLength; 702 break; 703 case USB_DT_CONFIG: 704 debug("USB_DT_CONFIG config\n"); 705 srcptr = &descriptor.config; 706 srclen = descriptor.config.bLength + 707 descriptor.interface.bLength + 708 descriptor.endpoint.bLength; 709 break; 710 case USB_DT_STRING: 711 debug("USB_DT_STRING config\n"); 712 switch (le16_to_cpu(req->value) & 0xff) { 713 case 0: /* Language */ 714 srcptr = "\4\3\1\0"; 715 srclen = 4; 716 break; 717 case 1: /* Vendor */ 718 srcptr = "\16\3u\0-\0b\0o\0o\0t\0"; 719 srclen = 14; 720 break; 721 case 2: /* Product */ 722 srcptr = "\52\3E\0H\0C\0I\0 " 723 "\0H\0o\0s\0t\0 " 724 "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0"; 725 srclen = 42; 726 break; 727 default: 728 debug("unknown value DT_STRING %x\n", 729 le16_to_cpu(req->value)); 730 goto unknown; 731 } 732 break; 733 default: 734 debug("unknown value %x\n", le16_to_cpu(req->value)); 735 goto unknown; 736 } 737 break; 738 case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8): 739 switch (le16_to_cpu(req->value) >> 8) { 740 case USB_DT_HUB: 741 debug("USB_DT_HUB config\n"); 742 srcptr = &descriptor.hub; 743 srclen = descriptor.hub.bLength; 744 break; 745 default: 746 debug("unknown value %x\n", le16_to_cpu(req->value)); 747 goto unknown; 748 } 749 break; 750 case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8): 751 debug("USB_REQ_SET_ADDRESS\n"); 752 ctrl->rootdev = le16_to_cpu(req->value); 753 break; 754 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 755 debug("USB_REQ_SET_CONFIGURATION\n"); 756 /* Nothing to do */ 757 break; 758 case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8): 759 tmpbuf[0] = 1; /* USB_STATUS_SELFPOWERED */ 760 tmpbuf[1] = 0; 761 srcptr = tmpbuf; 762 srclen = 2; 763 break; 764 case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8): 765 memset(tmpbuf, 0, 4); 766 reg = ehci_readl(status_reg); 767 if (reg & EHCI_PS_CS) 768 tmpbuf[0] |= USB_PORT_STAT_CONNECTION; 769 if (reg & EHCI_PS_PE) 770 tmpbuf[0] |= USB_PORT_STAT_ENABLE; 771 if (reg & EHCI_PS_SUSP) 772 tmpbuf[0] |= USB_PORT_STAT_SUSPEND; 773 if (reg & EHCI_PS_OCA) 774 tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT; 775 if (reg & EHCI_PS_PR) 776 tmpbuf[0] |= USB_PORT_STAT_RESET; 777 if (reg & EHCI_PS_PP) 778 tmpbuf[1] |= USB_PORT_STAT_POWER >> 8; 779 780 if (ehci_is_TDI()) { 781 switch (ctrl->ops.get_port_speed(ctrl, reg)) { 782 case PORTSC_PSPD_FS: 783 break; 784 case PORTSC_PSPD_LS: 785 tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8; 786 break; 787 case PORTSC_PSPD_HS: 788 default: 789 tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; 790 break; 791 } 792 } else { 793 tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; 794 } 795 796 if (reg & EHCI_PS_CSC) 797 tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION; 798 if (reg & EHCI_PS_PEC) 799 tmpbuf[2] |= USB_PORT_STAT_C_ENABLE; 800 if (reg & EHCI_PS_OCC) 801 tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT; 802 if (ctrl->portreset & (1 << port)) 803 tmpbuf[2] |= USB_PORT_STAT_C_RESET; 804 805 srcptr = tmpbuf; 806 srclen = 4; 807 break; 808 case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 809 reg = ehci_readl(status_reg); 810 reg &= ~EHCI_PS_CLEAR; 811 switch (le16_to_cpu(req->value)) { 812 case USB_PORT_FEAT_ENABLE: 813 reg |= EHCI_PS_PE; 814 ehci_writel(status_reg, reg); 815 break; 816 case USB_PORT_FEAT_POWER: 817 if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams))) { 818 reg |= EHCI_PS_PP; 819 ehci_writel(status_reg, reg); 820 } 821 break; 822 case USB_PORT_FEAT_RESET: 823 if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) == EHCI_PS_CS && 824 !ehci_is_TDI() && 825 EHCI_PS_IS_LOWSPEED(reg)) { 826 /* Low speed device, give up ownership. */ 827 debug("port %d low speed --> companion\n", 828 port - 1); 829 reg |= EHCI_PS_PO; 830 ehci_writel(status_reg, reg); 831 return -ENXIO; 832 } else { 833 int ret; 834 835 reg |= EHCI_PS_PR; 836 reg &= ~EHCI_PS_PE; 837 ehci_writel(status_reg, reg); 838 /* 839 * caller must wait, then call GetPortStatus 840 * usb 2.0 specification say 50 ms resets on 841 * root 842 */ 843 ctrl->ops.powerup_fixup(ctrl, status_reg, ®); 844 845 ehci_writel(status_reg, reg & ~EHCI_PS_PR); 846 /* 847 * A host controller must terminate the reset 848 * and stabilize the state of the port within 849 * 2 milliseconds 850 */ 851 ret = handshake(status_reg, EHCI_PS_PR, 0, 852 2 * 1000); 853 if (!ret) { 854 reg = ehci_readl(status_reg); 855 if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) 856 == EHCI_PS_CS && !ehci_is_TDI()) { 857 debug("port %d full speed --> companion\n", port - 1); 858 reg &= ~EHCI_PS_CLEAR; 859 reg |= EHCI_PS_PO; 860 ehci_writel(status_reg, reg); 861 return -ENXIO; 862 } else { 863 ctrl->portreset |= 1 << port; 864 } 865 } else { 866 printf("port(%d) reset error\n", 867 port - 1); 868 } 869 } 870 break; 871 case USB_PORT_FEAT_TEST: 872 ehci_shutdown(ctrl); 873 reg &= ~(0xf << 16); 874 reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16; 875 ehci_writel(status_reg, reg); 876 break; 877 default: 878 debug("unknown feature %x\n", le16_to_cpu(req->value)); 879 goto unknown; 880 } 881 /* unblock posted writes */ 882 (void) ehci_readl(&ctrl->hcor->or_usbcmd); 883 break; 884 case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 885 reg = ehci_readl(status_reg); 886 reg &= ~EHCI_PS_CLEAR; 887 switch (le16_to_cpu(req->value)) { 888 case USB_PORT_FEAT_ENABLE: 889 reg &= ~EHCI_PS_PE; 890 break; 891 case USB_PORT_FEAT_C_ENABLE: 892 reg |= EHCI_PS_PE; 893 break; 894 case USB_PORT_FEAT_POWER: 895 if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams))) 896 reg &= ~EHCI_PS_PP; 897 break; 898 case USB_PORT_FEAT_C_CONNECTION: 899 reg |= EHCI_PS_CSC; 900 break; 901 case USB_PORT_FEAT_OVER_CURRENT: 902 reg |= EHCI_PS_OCC; 903 break; 904 case USB_PORT_FEAT_C_RESET: 905 ctrl->portreset &= ~(1 << port); 906 break; 907 default: 908 debug("unknown feature %x\n", le16_to_cpu(req->value)); 909 goto unknown; 910 } 911 ehci_writel(status_reg, reg); 912 /* unblock posted write */ 913 (void) ehci_readl(&ctrl->hcor->or_usbcmd); 914 break; 915 default: 916 debug("Unknown request\n"); 917 goto unknown; 918 } 919 920 mdelay(1); 921 len = min3(srclen, (int)le16_to_cpu(req->length), length); 922 if (srcptr != NULL && len > 0) 923 memcpy(buffer, srcptr, len); 924 else 925 debug("Len is 0\n"); 926 927 dev->act_len = len; 928 dev->status = 0; 929 return 0; 930 931 unknown: 932 debug("requesttype=%x, request=%x, value=%x, index=%x, length=%x\n", 933 req->requesttype, req->request, le16_to_cpu(req->value), 934 le16_to_cpu(req->index), le16_to_cpu(req->length)); 935 936 dev->act_len = 0; 937 dev->status = USB_ST_STALLED; 938 return -1; 939 } 940 941 static const struct ehci_ops default_ehci_ops = { 942 .set_usb_mode = ehci_set_usbmode, 943 .get_port_speed = ehci_get_port_speed, 944 .powerup_fixup = ehci_powerup_fixup, 945 .get_portsc_register = ehci_get_portsc_register, 946 }; 947 948 static void ehci_setup_ops(struct ehci_ctrl *ctrl, const struct ehci_ops *ops) 949 { 950 if (!ops) { 951 ctrl->ops = default_ehci_ops; 952 } else { 953 ctrl->ops = *ops; 954 if (!ctrl->ops.set_usb_mode) 955 ctrl->ops.set_usb_mode = ehci_set_usbmode; 956 if (!ctrl->ops.get_port_speed) 957 ctrl->ops.get_port_speed = ehci_get_port_speed; 958 if (!ctrl->ops.powerup_fixup) 959 ctrl->ops.powerup_fixup = ehci_powerup_fixup; 960 if (!ctrl->ops.get_portsc_register) 961 ctrl->ops.get_portsc_register = 962 ehci_get_portsc_register; 963 } 964 } 965 966 #ifndef CONFIG_DM_USB 967 void ehci_set_controller_priv(int index, void *priv, const struct ehci_ops *ops) 968 { 969 struct ehci_ctrl *ctrl = &ehcic[index]; 970 971 ctrl->priv = priv; 972 ehci_setup_ops(ctrl, ops); 973 } 974 975 void *ehci_get_controller_priv(int index) 976 { 977 return ehcic[index].priv; 978 } 979 #endif 980 981 static int ehci_common_init(struct ehci_ctrl *ctrl, uint tweaks) 982 { 983 struct QH *qh_list; 984 struct QH *periodic; 985 uint32_t reg; 986 uint32_t cmd; 987 int i; 988 989 /* Set the high address word (aka segment) for 64-bit controller */ 990 if (ehci_readl(&ctrl->hccr->cr_hccparams) & 1) 991 ehci_writel(&ctrl->hcor->or_ctrldssegment, 0); 992 993 qh_list = &ctrl->qh_list; 994 995 /* Set head of reclaim list */ 996 memset(qh_list, 0, sizeof(*qh_list)); 997 qh_list->qh_link = cpu_to_hc32(virt_to_phys(qh_list) | QH_LINK_TYPE_QH); 998 qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) | 999 QH_ENDPT1_EPS(USB_SPEED_HIGH)); 1000 qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 1001 qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1002 qh_list->qh_overlay.qt_token = 1003 cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED)); 1004 1005 flush_dcache_range((unsigned long)qh_list, 1006 ALIGN_END_ADDR(struct QH, qh_list, 1)); 1007 1008 /* Set async. queue head pointer. */ 1009 ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(qh_list)); 1010 1011 /* 1012 * Set up periodic list 1013 * Step 1: Parent QH for all periodic transfers. 1014 */ 1015 ctrl->periodic_schedules = 0; 1016 periodic = &ctrl->periodic_queue; 1017 memset(periodic, 0, sizeof(*periodic)); 1018 periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE); 1019 periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 1020 periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1021 1022 flush_dcache_range((unsigned long)periodic, 1023 ALIGN_END_ADDR(struct QH, periodic, 1)); 1024 1025 /* 1026 * Step 2: Setup frame-list: Every microframe, USB tries the same list. 1027 * In particular, device specifications on polling frequency 1028 * are disregarded. Keyboards seem to send NAK/NYet reliably 1029 * when polled with an empty buffer. 1030 * 1031 * Split Transactions will be spread across microframes using 1032 * S-mask and C-mask. 1033 */ 1034 if (ctrl->periodic_list == NULL) 1035 ctrl->periodic_list = memalign(4096, 1024 * 4); 1036 1037 if (!ctrl->periodic_list) 1038 return -ENOMEM; 1039 for (i = 0; i < 1024; i++) { 1040 ctrl->periodic_list[i] = cpu_to_hc32((unsigned long)periodic 1041 | QH_LINK_TYPE_QH); 1042 } 1043 1044 flush_dcache_range((unsigned long)ctrl->periodic_list, 1045 ALIGN_END_ADDR(uint32_t, ctrl->periodic_list, 1046 1024)); 1047 1048 /* Set periodic list base address */ 1049 ehci_writel(&ctrl->hcor->or_periodiclistbase, 1050 (unsigned long)ctrl->periodic_list); 1051 1052 reg = ehci_readl(&ctrl->hccr->cr_hcsparams); 1053 descriptor.hub.bNbrPorts = HCS_N_PORTS(reg); 1054 debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts); 1055 /* Port Indicators */ 1056 if (HCS_INDICATOR(reg)) 1057 put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics) 1058 | 0x80, &descriptor.hub.wHubCharacteristics); 1059 /* Port Power Control */ 1060 if (HCS_PPC(reg)) 1061 put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics) 1062 | 0x01, &descriptor.hub.wHubCharacteristics); 1063 1064 /* Start the host controller. */ 1065 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 1066 /* 1067 * Philips, Intel, and maybe others need CMD_RUN before the 1068 * root hub will detect new devices (why?); NEC doesn't 1069 */ 1070 cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); 1071 cmd |= CMD_RUN; 1072 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 1073 1074 if (!(tweaks & EHCI_TWEAK_NO_INIT_CF)) { 1075 /* take control over the ports */ 1076 cmd = ehci_readl(&ctrl->hcor->or_configflag); 1077 cmd |= FLAG_CF; 1078 ehci_writel(&ctrl->hcor->or_configflag, cmd); 1079 } 1080 1081 /* unblock posted write */ 1082 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 1083 mdelay(5); 1084 reg = HC_VERSION(ehci_readl(&ctrl->hccr->cr_capbase)); 1085 printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff); 1086 1087 return 0; 1088 } 1089 1090 #ifndef CONFIG_DM_USB 1091 int usb_lowlevel_stop(int index) 1092 { 1093 ehci_shutdown(&ehcic[index]); 1094 return ehci_hcd_stop(index); 1095 } 1096 1097 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) 1098 { 1099 struct ehci_ctrl *ctrl = &ehcic[index]; 1100 uint tweaks = 0; 1101 int rc; 1102 1103 /** 1104 * Set ops to default_ehci_ops, ehci_hcd_init should call 1105 * ehci_set_controller_priv to change any of these function pointers. 1106 */ 1107 ctrl->ops = default_ehci_ops; 1108 1109 rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor); 1110 if (rc) 1111 return rc; 1112 if (!ctrl->hccr || !ctrl->hcor) 1113 return -1; 1114 if (init == USB_INIT_DEVICE) 1115 goto done; 1116 1117 /* EHCI spec section 4.1 */ 1118 if (ehci_reset(ctrl)) 1119 return -1; 1120 1121 #if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET) 1122 rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor); 1123 if (rc) 1124 return rc; 1125 #endif 1126 #ifdef CONFIG_USB_EHCI_FARADAY 1127 tweaks |= EHCI_TWEAK_NO_INIT_CF; 1128 #endif 1129 rc = ehci_common_init(ctrl, tweaks); 1130 if (rc) 1131 return rc; 1132 1133 ctrl->rootdev = 0; 1134 done: 1135 *controller = &ehcic[index]; 1136 return 0; 1137 } 1138 #endif 1139 1140 static int _ehci_submit_bulk_msg(struct usb_device *dev, unsigned long pipe, 1141 void *buffer, int length) 1142 { 1143 1144 if (usb_pipetype(pipe) != PIPE_BULK) { 1145 debug("non-bulk pipe (type=%lu)", usb_pipetype(pipe)); 1146 return -1; 1147 } 1148 return ehci_submit_async(dev, pipe, buffer, length, NULL); 1149 } 1150 1151 static int _ehci_submit_control_msg(struct usb_device *dev, unsigned long pipe, 1152 void *buffer, int length, 1153 struct devrequest *setup) 1154 { 1155 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 1156 1157 if (usb_pipetype(pipe) != PIPE_CONTROL) { 1158 debug("non-control pipe (type=%lu)", usb_pipetype(pipe)); 1159 return -1; 1160 } 1161 1162 if (usb_pipedevice(pipe) == ctrl->rootdev) { 1163 if (!ctrl->rootdev) 1164 dev->speed = USB_SPEED_HIGH; 1165 return ehci_submit_root(dev, pipe, buffer, length, setup); 1166 } 1167 return ehci_submit_async(dev, pipe, buffer, length, setup); 1168 } 1169 1170 struct int_queue { 1171 int elementsize; 1172 unsigned long pipe; 1173 struct QH *first; 1174 struct QH *current; 1175 struct QH *last; 1176 struct qTD *tds; 1177 }; 1178 1179 #define NEXT_QH(qh) (struct QH *)((unsigned long)hc32_to_cpu((qh)->qh_link) & ~0x1f) 1180 1181 static int 1182 enable_periodic(struct ehci_ctrl *ctrl) 1183 { 1184 uint32_t cmd; 1185 struct ehci_hcor *hcor = ctrl->hcor; 1186 int ret; 1187 1188 cmd = ehci_readl(&hcor->or_usbcmd); 1189 cmd |= CMD_PSE; 1190 ehci_writel(&hcor->or_usbcmd, cmd); 1191 1192 ret = handshake((uint32_t *)&hcor->or_usbsts, 1193 STS_PSS, STS_PSS, 100 * 1000); 1194 if (ret < 0) { 1195 printf("EHCI failed: timeout when enabling periodic list\n"); 1196 return -ETIMEDOUT; 1197 } 1198 udelay(1000); 1199 return 0; 1200 } 1201 1202 static int 1203 disable_periodic(struct ehci_ctrl *ctrl) 1204 { 1205 uint32_t cmd; 1206 struct ehci_hcor *hcor = ctrl->hcor; 1207 int ret; 1208 1209 cmd = ehci_readl(&hcor->or_usbcmd); 1210 cmd &= ~CMD_PSE; 1211 ehci_writel(&hcor->or_usbcmd, cmd); 1212 1213 ret = handshake((uint32_t *)&hcor->or_usbsts, 1214 STS_PSS, 0, 100 * 1000); 1215 if (ret < 0) { 1216 printf("EHCI failed: timeout when disabling periodic list\n"); 1217 return -ETIMEDOUT; 1218 } 1219 return 0; 1220 } 1221 1222 static struct int_queue *_ehci_create_int_queue(struct usb_device *dev, 1223 unsigned long pipe, int queuesize, int elementsize, 1224 void *buffer, int interval) 1225 { 1226 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 1227 struct int_queue *result = NULL; 1228 uint32_t i, toggle; 1229 1230 /* 1231 * Interrupt transfers requiring several transactions are not supported 1232 * because bInterval is ignored. 1233 * 1234 * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2 1235 * <= PKT_ALIGN if several qTDs are required, while the USB 1236 * specification does not constrain this for interrupt transfers. That 1237 * means that ehci_submit_async() would support interrupt transfers 1238 * requiring several transactions only as long as the transfer size does 1239 * not require more than a single qTD. 1240 */ 1241 if (elementsize > usb_maxpacket(dev, pipe)) { 1242 printf("%s: xfers requiring several transactions are not supported.\n", 1243 __func__); 1244 return NULL; 1245 } 1246 1247 debug("Enter create_int_queue\n"); 1248 if (usb_pipetype(pipe) != PIPE_INTERRUPT) { 1249 debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe)); 1250 return NULL; 1251 } 1252 1253 /* limit to 4 full pages worth of data - 1254 * we can safely fit them in a single TD, 1255 * no matter the alignment 1256 */ 1257 if (elementsize >= 16384) { 1258 debug("too large elements for interrupt transfers\n"); 1259 return NULL; 1260 } 1261 1262 result = malloc(sizeof(*result)); 1263 if (!result) { 1264 debug("ehci intr queue: out of memory\n"); 1265 goto fail1; 1266 } 1267 result->elementsize = elementsize; 1268 result->pipe = pipe; 1269 result->first = memalign(USB_DMA_MINALIGN, 1270 sizeof(struct QH) * queuesize); 1271 if (!result->first) { 1272 debug("ehci intr queue: out of memory\n"); 1273 goto fail2; 1274 } 1275 result->current = result->first; 1276 result->last = result->first + queuesize - 1; 1277 result->tds = memalign(USB_DMA_MINALIGN, 1278 sizeof(struct qTD) * queuesize); 1279 if (!result->tds) { 1280 debug("ehci intr queue: out of memory\n"); 1281 goto fail3; 1282 } 1283 memset(result->first, 0, sizeof(struct QH) * queuesize); 1284 memset(result->tds, 0, sizeof(struct qTD) * queuesize); 1285 1286 toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); 1287 1288 for (i = 0; i < queuesize; i++) { 1289 struct QH *qh = result->first + i; 1290 struct qTD *td = result->tds + i; 1291 void **buf = &qh->buffer; 1292 1293 qh->qh_link = cpu_to_hc32((unsigned long)(qh+1) | QH_LINK_TYPE_QH); 1294 if (i == queuesize - 1) 1295 qh->qh_link = cpu_to_hc32(QH_LINK_TERMINATE); 1296 1297 qh->qh_overlay.qt_next = cpu_to_hc32((unsigned long)td); 1298 qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1299 qh->qh_endpt1 = 1300 cpu_to_hc32((0 << 28) | /* No NAK reload (ehci 4.9) */ 1301 (usb_maxpacket(dev, pipe) << 16) | /* MPS */ 1302 (1 << 14) | 1303 QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) | 1304 (usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */ 1305 (usb_pipedevice(pipe) << 0)); 1306 qh->qh_endpt2 = cpu_to_hc32((1 << 30) | /* 1 Tx per mframe */ 1307 (1 << 0)); /* S-mask: microframe 0 */ 1308 if (dev->speed == USB_SPEED_LOW || 1309 dev->speed == USB_SPEED_FULL) { 1310 /* C-mask: microframes 2-4 */ 1311 qh->qh_endpt2 |= cpu_to_hc32((0x1c << 8)); 1312 } 1313 ehci_update_endpt2_dev_n_port(dev, qh); 1314 1315 td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 1316 td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1317 debug("communication direction is '%s'\n", 1318 usb_pipein(pipe) ? "in" : "out"); 1319 td->qt_token = cpu_to_hc32( 1320 QT_TOKEN_DT(toggle) | 1321 (elementsize << 16) | 1322 ((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */ 1323 0x80); /* active */ 1324 td->qt_buffer[0] = 1325 cpu_to_hc32((unsigned long)buffer + i * elementsize); 1326 td->qt_buffer[1] = 1327 cpu_to_hc32((td->qt_buffer[0] + 0x1000) & ~0xfff); 1328 td->qt_buffer[2] = 1329 cpu_to_hc32((td->qt_buffer[0] + 0x2000) & ~0xfff); 1330 td->qt_buffer[3] = 1331 cpu_to_hc32((td->qt_buffer[0] + 0x3000) & ~0xfff); 1332 td->qt_buffer[4] = 1333 cpu_to_hc32((td->qt_buffer[0] + 0x4000) & ~0xfff); 1334 1335 *buf = buffer + i * elementsize; 1336 toggle ^= 1; 1337 } 1338 1339 flush_dcache_range((unsigned long)buffer, 1340 ALIGN_END_ADDR(char, buffer, 1341 queuesize * elementsize)); 1342 flush_dcache_range((unsigned long)result->first, 1343 ALIGN_END_ADDR(struct QH, result->first, 1344 queuesize)); 1345 flush_dcache_range((unsigned long)result->tds, 1346 ALIGN_END_ADDR(struct qTD, result->tds, 1347 queuesize)); 1348 1349 if (ctrl->periodic_schedules > 0) { 1350 if (disable_periodic(ctrl) < 0) { 1351 debug("FATAL: periodic should never fail, but did"); 1352 goto fail3; 1353 } 1354 } 1355 1356 /* hook up to periodic list */ 1357 struct QH *list = &ctrl->periodic_queue; 1358 result->last->qh_link = list->qh_link; 1359 list->qh_link = cpu_to_hc32((unsigned long)result->first | QH_LINK_TYPE_QH); 1360 1361 flush_dcache_range((unsigned long)result->last, 1362 ALIGN_END_ADDR(struct QH, result->last, 1)); 1363 flush_dcache_range((unsigned long)list, 1364 ALIGN_END_ADDR(struct QH, list, 1)); 1365 1366 if (enable_periodic(ctrl) < 0) { 1367 debug("FATAL: periodic should never fail, but did"); 1368 goto fail3; 1369 } 1370 ctrl->periodic_schedules++; 1371 1372 debug("Exit create_int_queue\n"); 1373 return result; 1374 fail3: 1375 if (result->tds) 1376 free(result->tds); 1377 fail2: 1378 if (result->first) 1379 free(result->first); 1380 if (result) 1381 free(result); 1382 fail1: 1383 return NULL; 1384 } 1385 1386 static void *_ehci_poll_int_queue(struct usb_device *dev, 1387 struct int_queue *queue) 1388 { 1389 struct QH *cur = queue->current; 1390 struct qTD *cur_td; 1391 uint32_t token, toggle; 1392 unsigned long pipe = queue->pipe; 1393 1394 /* depleted queue */ 1395 if (cur == NULL) { 1396 debug("Exit poll_int_queue with completed queue\n"); 1397 return NULL; 1398 } 1399 /* still active */ 1400 cur_td = &queue->tds[queue->current - queue->first]; 1401 invalidate_dcache_range((unsigned long)cur_td, 1402 ALIGN_END_ADDR(struct qTD, cur_td, 1)); 1403 token = hc32_to_cpu(cur_td->qt_token); 1404 if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) { 1405 debug("Exit poll_int_queue with no completed intr transfer. token is %x\n", token); 1406 return NULL; 1407 } 1408 1409 toggle = QT_TOKEN_GET_DT(token); 1410 usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle); 1411 1412 if (!(cur->qh_link & QH_LINK_TERMINATE)) 1413 queue->current++; 1414 else 1415 queue->current = NULL; 1416 1417 invalidate_dcache_range((unsigned long)cur->buffer, 1418 ALIGN_END_ADDR(char, cur->buffer, 1419 queue->elementsize)); 1420 1421 debug("Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n", 1422 token, cur, queue->first); 1423 return cur->buffer; 1424 } 1425 1426 /* Do not free buffers associated with QHs, they're owned by someone else */ 1427 static int _ehci_destroy_int_queue(struct usb_device *dev, 1428 struct int_queue *queue) 1429 { 1430 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 1431 int result = -1; 1432 unsigned long timeout; 1433 1434 if (disable_periodic(ctrl) < 0) { 1435 debug("FATAL: periodic should never fail, but did"); 1436 goto out; 1437 } 1438 ctrl->periodic_schedules--; 1439 1440 struct QH *cur = &ctrl->periodic_queue; 1441 timeout = get_timer(0) + 500; /* abort after 500ms */ 1442 while (!(cur->qh_link & cpu_to_hc32(QH_LINK_TERMINATE))) { 1443 debug("considering %p, with qh_link %x\n", cur, cur->qh_link); 1444 if (NEXT_QH(cur) == queue->first) { 1445 debug("found candidate. removing from chain\n"); 1446 cur->qh_link = queue->last->qh_link; 1447 flush_dcache_range((unsigned long)cur, 1448 ALIGN_END_ADDR(struct QH, cur, 1)); 1449 result = 0; 1450 break; 1451 } 1452 cur = NEXT_QH(cur); 1453 if (get_timer(0) > timeout) { 1454 printf("Timeout destroying interrupt endpoint queue\n"); 1455 result = -1; 1456 goto out; 1457 } 1458 } 1459 1460 if (ctrl->periodic_schedules > 0) { 1461 result = enable_periodic(ctrl); 1462 if (result < 0) 1463 debug("FATAL: periodic should never fail, but did"); 1464 } 1465 1466 out: 1467 free(queue->tds); 1468 free(queue->first); 1469 free(queue); 1470 1471 return result; 1472 } 1473 1474 static int _ehci_submit_int_msg(struct usb_device *dev, unsigned long pipe, 1475 void *buffer, int length, int interval) 1476 { 1477 void *backbuffer; 1478 struct int_queue *queue; 1479 unsigned long timeout; 1480 int result = 0, ret; 1481 1482 debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d", 1483 dev, pipe, buffer, length, interval); 1484 1485 queue = _ehci_create_int_queue(dev, pipe, 1, length, buffer, interval); 1486 if (!queue) 1487 return -1; 1488 1489 timeout = get_timer(0) + USB_TIMEOUT_MS(pipe); 1490 while ((backbuffer = _ehci_poll_int_queue(dev, queue)) == NULL) 1491 if (get_timer(0) > timeout) { 1492 printf("Timeout poll on interrupt endpoint\n"); 1493 result = -ETIMEDOUT; 1494 break; 1495 } 1496 1497 if (backbuffer != buffer) { 1498 debug("got wrong buffer back (%p instead of %p)\n", 1499 backbuffer, buffer); 1500 return -EINVAL; 1501 } 1502 1503 ret = _ehci_destroy_int_queue(dev, queue); 1504 if (ret < 0) 1505 return ret; 1506 1507 /* everything worked out fine */ 1508 return result; 1509 } 1510 1511 #ifndef CONFIG_DM_USB 1512 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, 1513 void *buffer, int length) 1514 { 1515 return _ehci_submit_bulk_msg(dev, pipe, buffer, length); 1516 } 1517 1518 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1519 int length, struct devrequest *setup) 1520 { 1521 return _ehci_submit_control_msg(dev, pipe, buffer, length, setup); 1522 } 1523 1524 int submit_int_msg(struct usb_device *dev, unsigned long pipe, 1525 void *buffer, int length, int interval) 1526 { 1527 return _ehci_submit_int_msg(dev, pipe, buffer, length, interval); 1528 } 1529 1530 struct int_queue *create_int_queue(struct usb_device *dev, 1531 unsigned long pipe, int queuesize, int elementsize, 1532 void *buffer, int interval) 1533 { 1534 return _ehci_create_int_queue(dev, pipe, queuesize, elementsize, 1535 buffer, interval); 1536 } 1537 1538 void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) 1539 { 1540 return _ehci_poll_int_queue(dev, queue); 1541 } 1542 1543 int destroy_int_queue(struct usb_device *dev, struct int_queue *queue) 1544 { 1545 return _ehci_destroy_int_queue(dev, queue); 1546 } 1547 #endif 1548 1549 #ifdef CONFIG_DM_USB 1550 static int ehci_submit_control_msg(struct udevice *dev, struct usb_device *udev, 1551 unsigned long pipe, void *buffer, int length, 1552 struct devrequest *setup) 1553 { 1554 debug("%s: dev='%s', udev=%p, udev->dev='%s', portnr=%d\n", __func__, 1555 dev->name, udev, udev->dev->name, udev->portnr); 1556 1557 return _ehci_submit_control_msg(udev, pipe, buffer, length, setup); 1558 } 1559 1560 static int ehci_submit_bulk_msg(struct udevice *dev, struct usb_device *udev, 1561 unsigned long pipe, void *buffer, int length) 1562 { 1563 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1564 return _ehci_submit_bulk_msg(udev, pipe, buffer, length); 1565 } 1566 1567 static int ehci_submit_int_msg(struct udevice *dev, struct usb_device *udev, 1568 unsigned long pipe, void *buffer, int length, 1569 int interval) 1570 { 1571 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1572 return _ehci_submit_int_msg(udev, pipe, buffer, length, interval); 1573 } 1574 1575 static struct int_queue *ehci_create_int_queue(struct udevice *dev, 1576 struct usb_device *udev, unsigned long pipe, int queuesize, 1577 int elementsize, void *buffer, int interval) 1578 { 1579 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1580 return _ehci_create_int_queue(udev, pipe, queuesize, elementsize, 1581 buffer, interval); 1582 } 1583 1584 static void *ehci_poll_int_queue(struct udevice *dev, struct usb_device *udev, 1585 struct int_queue *queue) 1586 { 1587 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1588 return _ehci_poll_int_queue(udev, queue); 1589 } 1590 1591 static int ehci_destroy_int_queue(struct udevice *dev, struct usb_device *udev, 1592 struct int_queue *queue) 1593 { 1594 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1595 return _ehci_destroy_int_queue(udev, queue); 1596 } 1597 1598 static int ehci_get_max_xfer_size(struct udevice *dev, size_t *size) 1599 { 1600 /* 1601 * EHCD can handle any transfer length as long as there is enough 1602 * free heap space left, hence set the theoretical max number here. 1603 */ 1604 *size = SIZE_MAX; 1605 1606 return 0; 1607 } 1608 1609 int ehci_register(struct udevice *dev, struct ehci_hccr *hccr, 1610 struct ehci_hcor *hcor, const struct ehci_ops *ops, 1611 uint tweaks, enum usb_init_type init) 1612 { 1613 struct usb_bus_priv *priv = dev_get_uclass_priv(dev); 1614 struct ehci_ctrl *ctrl = dev_get_priv(dev); 1615 int ret = -1; 1616 1617 debug("%s: dev='%s', ctrl=%p, hccr=%p, hcor=%p, init=%d\n", __func__, 1618 dev->name, ctrl, hccr, hcor, init); 1619 1620 if (!ctrl || !hccr || !hcor) 1621 goto err; 1622 1623 priv->desc_before_addr = true; 1624 1625 ehci_setup_ops(ctrl, ops); 1626 ctrl->hccr = hccr; 1627 ctrl->hcor = hcor; 1628 ctrl->priv = ctrl; 1629 1630 ctrl->init = init; 1631 if (ctrl->init == USB_INIT_DEVICE) 1632 goto done; 1633 1634 ret = ehci_reset(ctrl); 1635 if (ret) 1636 goto err; 1637 1638 if (ctrl->ops.init_after_reset) { 1639 ret = ctrl->ops.init_after_reset(ctrl); 1640 if (ret) 1641 goto err; 1642 } 1643 1644 ret = ehci_common_init(ctrl, tweaks); 1645 if (ret) 1646 goto err; 1647 done: 1648 return 0; 1649 err: 1650 free(ctrl); 1651 debug("%s: failed, ret=%d\n", __func__, ret); 1652 return ret; 1653 } 1654 1655 int ehci_deregister(struct udevice *dev) 1656 { 1657 struct ehci_ctrl *ctrl = dev_get_priv(dev); 1658 1659 if (ctrl->init == USB_INIT_DEVICE) 1660 return 0; 1661 1662 ehci_shutdown(ctrl); 1663 1664 return 0; 1665 } 1666 1667 struct dm_usb_ops ehci_usb_ops = { 1668 .control = ehci_submit_control_msg, 1669 .bulk = ehci_submit_bulk_msg, 1670 .interrupt = ehci_submit_int_msg, 1671 .create_int_queue = ehci_create_int_queue, 1672 .poll_int_queue = ehci_poll_int_queue, 1673 .destroy_int_queue = ehci_destroy_int_queue, 1674 .get_max_xfer_size = ehci_get_max_xfer_size, 1675 }; 1676 1677 #endif 1678 1679 #ifdef CONFIG_PHY 1680 int ehci_setup_phy(struct udevice *dev, struct phy *phy, int index) 1681 { 1682 int ret; 1683 1684 if (!phy) 1685 return 0; 1686 1687 ret = generic_phy_get_by_index(dev, index, phy); 1688 if (ret) { 1689 if (ret != -ENOENT) { 1690 dev_err(dev, "failed to get usb phy\n"); 1691 return ret; 1692 } 1693 } else { 1694 ret = generic_phy_init(phy); 1695 if (ret) { 1696 dev_err(dev, "failed to init usb phy\n"); 1697 return ret; 1698 } 1699 1700 ret = generic_phy_power_on(phy); 1701 if (ret) { 1702 dev_err(dev, "failed to power on usb phy\n"); 1703 return generic_phy_exit(phy); 1704 } 1705 } 1706 1707 return 0; 1708 } 1709 1710 int ehci_shutdown_phy(struct udevice *dev, struct phy *phy) 1711 { 1712 int ret = 0; 1713 1714 if (!phy) 1715 return 0; 1716 1717 if (generic_phy_valid(phy)) { 1718 ret = generic_phy_power_off(phy); 1719 if (ret) { 1720 dev_err(dev, "failed to power off usb phy\n"); 1721 return ret; 1722 } 1723 1724 ret = generic_phy_exit(phy); 1725 if (ret) { 1726 dev_err(dev, "failed to power off usb phy\n"); 1727 return ret; 1728 } 1729 } 1730 1731 return 0; 1732 } 1733 #else 1734 int ehci_setup_phy(struct udevice *dev, struct phy *phy, int index) 1735 { 1736 return 0; 1737 } 1738 1739 int ehci_shutdown_phy(struct udevice *dev, struct phy *phy) 1740 { 1741 return 0; 1742 } 1743 #endif 1744