1 /*- 2 * Copyright (c) 2007-2008, Juniper Networks, Inc. 3 * Copyright (c) 2008, Excito Elektronik i Skåne AB 4 * Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it> 5 * 6 * All rights reserved. 7 * 8 * SPDX-License-Identifier: GPL-2.0 9 */ 10 #include <common.h> 11 #include <dm.h> 12 #include <errno.h> 13 #include <asm/byteorder.h> 14 #include <asm/unaligned.h> 15 #include <usb.h> 16 #include <asm/io.h> 17 #include <malloc.h> 18 #include <memalign.h> 19 #include <watchdog.h> 20 #include <linux/compiler.h> 21 22 #include "ehci.h" 23 24 #ifndef CONFIG_USB_MAX_CONTROLLER_COUNT 25 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 26 #endif 27 28 /* 29 * EHCI spec page 20 says that the HC may take up to 16 uFrames (= 4ms) to halt. 30 * Let's time out after 8 to have a little safety margin on top of that. 31 */ 32 #define HCHALT_TIMEOUT (8 * 1000) 33 34 #ifndef CONFIG_DM_USB 35 static struct ehci_ctrl ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT]; 36 #endif 37 38 #define ALIGN_END_ADDR(type, ptr, size) \ 39 ((unsigned long)(ptr) + roundup((size) * sizeof(type), USB_DMA_MINALIGN)) 40 41 static struct descriptor { 42 struct usb_hub_descriptor hub; 43 struct usb_device_descriptor device; 44 struct usb_linux_config_descriptor config; 45 struct usb_linux_interface_descriptor interface; 46 struct usb_endpoint_descriptor endpoint; 47 } __attribute__ ((packed)) descriptor = { 48 { 49 0x8, /* bDescLength */ 50 0x29, /* bDescriptorType: hub descriptor */ 51 2, /* bNrPorts -- runtime modified */ 52 0, /* wHubCharacteristics */ 53 10, /* bPwrOn2PwrGood */ 54 0, /* bHubCntrCurrent */ 55 {}, /* Device removable */ 56 {} /* at most 7 ports! XXX */ 57 }, 58 { 59 0x12, /* bLength */ 60 1, /* bDescriptorType: UDESC_DEVICE */ 61 cpu_to_le16(0x0200), /* bcdUSB: v2.0 */ 62 9, /* bDeviceClass: UDCLASS_HUB */ 63 0, /* bDeviceSubClass: UDSUBCLASS_HUB */ 64 1, /* bDeviceProtocol: UDPROTO_HSHUBSTT */ 65 64, /* bMaxPacketSize: 64 bytes */ 66 0x0000, /* idVendor */ 67 0x0000, /* idProduct */ 68 cpu_to_le16(0x0100), /* bcdDevice */ 69 1, /* iManufacturer */ 70 2, /* iProduct */ 71 0, /* iSerialNumber */ 72 1 /* bNumConfigurations: 1 */ 73 }, 74 { 75 0x9, 76 2, /* bDescriptorType: UDESC_CONFIG */ 77 cpu_to_le16(0x19), 78 1, /* bNumInterface */ 79 1, /* bConfigurationValue */ 80 0, /* iConfiguration */ 81 0x40, /* bmAttributes: UC_SELF_POWER */ 82 0 /* bMaxPower */ 83 }, 84 { 85 0x9, /* bLength */ 86 4, /* bDescriptorType: UDESC_INTERFACE */ 87 0, /* bInterfaceNumber */ 88 0, /* bAlternateSetting */ 89 1, /* bNumEndpoints */ 90 9, /* bInterfaceClass: UICLASS_HUB */ 91 0, /* bInterfaceSubClass: UISUBCLASS_HUB */ 92 0, /* bInterfaceProtocol: UIPROTO_HSHUBSTT */ 93 0 /* iInterface */ 94 }, 95 { 96 0x7, /* bLength */ 97 5, /* bDescriptorType: UDESC_ENDPOINT */ 98 0x81, /* bEndpointAddress: 99 * UE_DIR_IN | EHCI_INTR_ENDPT 100 */ 101 3, /* bmAttributes: UE_INTERRUPT */ 102 8, /* wMaxPacketSize */ 103 255 /* bInterval */ 104 }, 105 }; 106 107 #if defined(CONFIG_EHCI_IS_TDI) 108 #define ehci_is_TDI() (1) 109 #else 110 #define ehci_is_TDI() (0) 111 #endif 112 113 static struct ehci_ctrl *ehci_get_ctrl(struct usb_device *udev) 114 { 115 #ifdef CONFIG_DM_USB 116 return dev_get_priv(usb_get_bus(udev->dev)); 117 #else 118 return udev->controller; 119 #endif 120 } 121 122 static int ehci_get_port_speed(struct ehci_ctrl *ctrl, uint32_t reg) 123 { 124 return PORTSC_PSPD(reg); 125 } 126 127 static void ehci_set_usbmode(struct ehci_ctrl *ctrl) 128 { 129 uint32_t tmp; 130 uint32_t *reg_ptr; 131 132 reg_ptr = (uint32_t *)((u8 *)&ctrl->hcor->or_usbcmd + USBMODE); 133 tmp = ehci_readl(reg_ptr); 134 tmp |= USBMODE_CM_HC; 135 #if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN) 136 tmp |= USBMODE_BE; 137 #else 138 tmp &= ~USBMODE_BE; 139 #endif 140 ehci_writel(reg_ptr, tmp); 141 } 142 143 static void ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg, 144 uint32_t *reg) 145 { 146 mdelay(50); 147 } 148 149 static uint32_t *ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port) 150 { 151 if (port < 0 || port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { 152 /* Printing the message would cause a scan failure! */ 153 debug("The request port(%u) is not configured\n", port); 154 return NULL; 155 } 156 157 return (uint32_t *)&ctrl->hcor->or_portsc[port]; 158 } 159 160 static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) 161 { 162 uint32_t result; 163 do { 164 result = ehci_readl(ptr); 165 udelay(5); 166 if (result == ~(uint32_t)0) 167 return -1; 168 result &= mask; 169 if (result == done) 170 return 0; 171 usec--; 172 } while (usec > 0); 173 return -1; 174 } 175 176 static int ehci_reset(struct ehci_ctrl *ctrl) 177 { 178 uint32_t cmd; 179 int ret = 0; 180 181 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 182 cmd = (cmd & ~CMD_RUN) | CMD_RESET; 183 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 184 ret = handshake((uint32_t *)&ctrl->hcor->or_usbcmd, 185 CMD_RESET, 0, 250 * 1000); 186 if (ret < 0) { 187 printf("EHCI fail to reset\n"); 188 goto out; 189 } 190 191 if (ehci_is_TDI()) 192 ctrl->ops.set_usb_mode(ctrl); 193 194 #ifdef CONFIG_USB_EHCI_TXFIFO_THRESH 195 cmd = ehci_readl(&ctrl->hcor->or_txfilltuning); 196 cmd &= ~TXFIFO_THRESH_MASK; 197 cmd |= TXFIFO_THRESH(CONFIG_USB_EHCI_TXFIFO_THRESH); 198 ehci_writel(&ctrl->hcor->or_txfilltuning, cmd); 199 #endif 200 out: 201 return ret; 202 } 203 204 static int ehci_shutdown(struct ehci_ctrl *ctrl) 205 { 206 int i, ret = 0; 207 uint32_t cmd, reg; 208 209 if (!ctrl || !ctrl->hcor) 210 return -EINVAL; 211 212 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 213 cmd &= ~(CMD_PSE | CMD_ASE); 214 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 215 ret = handshake(&ctrl->hcor->or_usbsts, STS_ASS | STS_PSS, 0, 216 100 * 1000); 217 218 if (!ret) { 219 for (i = 0; i < CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS; i++) { 220 reg = ehci_readl(&ctrl->hcor->or_portsc[i]); 221 reg |= EHCI_PS_SUSP; 222 ehci_writel(&ctrl->hcor->or_portsc[i], reg); 223 } 224 225 cmd &= ~CMD_RUN; 226 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 227 ret = handshake(&ctrl->hcor->or_usbsts, STS_HALT, STS_HALT, 228 HCHALT_TIMEOUT); 229 } 230 231 if (ret) 232 puts("EHCI failed to shut down host controller.\n"); 233 234 return ret; 235 } 236 237 static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz) 238 { 239 uint32_t delta, next; 240 unsigned long addr = (unsigned long)buf; 241 int idx; 242 243 if (addr != ALIGN(addr, ARCH_DMA_MINALIGN)) 244 debug("EHCI-HCD: Misaligned buffer address (%p)\n", buf); 245 246 flush_dcache_range(addr, ALIGN(addr + sz, ARCH_DMA_MINALIGN)); 247 248 idx = 0; 249 while (idx < QT_BUFFER_CNT) { 250 td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys((void *)addr)); 251 td->qt_buffer_hi[idx] = 0; 252 next = (addr + EHCI_PAGE_SIZE) & ~(EHCI_PAGE_SIZE - 1); 253 delta = next - addr; 254 if (delta >= sz) 255 break; 256 sz -= delta; 257 addr = next; 258 idx++; 259 } 260 261 if (idx == QT_BUFFER_CNT) { 262 printf("out of buffer pointers (%zu bytes left)\n", sz); 263 return -1; 264 } 265 266 return 0; 267 } 268 269 static inline u8 ehci_encode_speed(enum usb_device_speed speed) 270 { 271 #define QH_HIGH_SPEED 2 272 #define QH_FULL_SPEED 0 273 #define QH_LOW_SPEED 1 274 if (speed == USB_SPEED_HIGH) 275 return QH_HIGH_SPEED; 276 if (speed == USB_SPEED_LOW) 277 return QH_LOW_SPEED; 278 return QH_FULL_SPEED; 279 } 280 281 static void ehci_update_endpt2_dev_n_port(struct usb_device *udev, 282 struct QH *qh) 283 { 284 uint8_t portnr = 0; 285 uint8_t hubaddr = 0; 286 287 if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL) 288 return; 289 290 usb_find_usb2_hub_address_port(udev, &hubaddr, &portnr); 291 292 qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(portnr) | 293 QH_ENDPT2_HUBADDR(hubaddr)); 294 } 295 296 static int 297 ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, 298 int length, struct devrequest *req) 299 { 300 ALLOC_ALIGN_BUFFER(struct QH, qh, 1, USB_DMA_MINALIGN); 301 struct qTD *qtd; 302 int qtd_count = 0; 303 int qtd_counter = 0; 304 volatile struct qTD *vtd; 305 unsigned long ts; 306 uint32_t *tdp; 307 uint32_t endpt, maxpacket, token, usbsts; 308 uint32_t c, toggle; 309 uint32_t cmd; 310 int timeout; 311 int ret = 0; 312 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 313 314 debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n", dev, pipe, 315 buffer, length, req); 316 if (req != NULL) 317 debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n", 318 req->request, req->request, 319 req->requesttype, req->requesttype, 320 le16_to_cpu(req->value), le16_to_cpu(req->value), 321 le16_to_cpu(req->index)); 322 323 #define PKT_ALIGN 512 324 /* 325 * The USB transfer is split into qTD transfers. Eeach qTD transfer is 326 * described by a transfer descriptor (the qTD). The qTDs form a linked 327 * list with a queue head (QH). 328 * 329 * Each qTD transfer starts with a new USB packet, i.e. a packet cannot 330 * have its beginning in a qTD transfer and its end in the following 331 * one, so the qTD transfer lengths have to be chosen accordingly. 332 * 333 * Each qTD transfer uses up to QT_BUFFER_CNT data buffers, mapped to 334 * single pages. The first data buffer can start at any offset within a 335 * page (not considering the cache-line alignment issues), while the 336 * following buffers must be page-aligned. There is no alignment 337 * constraint on the size of a qTD transfer. 338 */ 339 if (req != NULL) 340 /* 1 qTD will be needed for SETUP, and 1 for ACK. */ 341 qtd_count += 1 + 1; 342 if (length > 0 || req == NULL) { 343 /* 344 * Determine the qTD transfer size that will be used for the 345 * data payload (not considering the first qTD transfer, which 346 * may be longer or shorter, and the final one, which may be 347 * shorter). 348 * 349 * In order to keep each packet within a qTD transfer, the qTD 350 * transfer size is aligned to PKT_ALIGN, which is a multiple of 351 * wMaxPacketSize (except in some cases for interrupt transfers, 352 * see comment in submit_int_msg()). 353 * 354 * By default, i.e. if the input buffer is aligned to PKT_ALIGN, 355 * QT_BUFFER_CNT full pages will be used. 356 */ 357 int xfr_sz = QT_BUFFER_CNT; 358 /* 359 * However, if the input buffer is not aligned to PKT_ALIGN, the 360 * qTD transfer size will be one page shorter, and the first qTD 361 * data buffer of each transfer will be page-unaligned. 362 */ 363 if ((unsigned long)buffer & (PKT_ALIGN - 1)) 364 xfr_sz--; 365 /* Convert the qTD transfer size to bytes. */ 366 xfr_sz *= EHCI_PAGE_SIZE; 367 /* 368 * Approximate by excess the number of qTDs that will be 369 * required for the data payload. The exact formula is way more 370 * complicated and saves at most 2 qTDs, i.e. a total of 128 371 * bytes. 372 */ 373 qtd_count += 2 + length / xfr_sz; 374 } 375 /* 376 * Threshold value based on the worst-case total size of the allocated qTDs for 377 * a mass-storage transfer of 65535 blocks of 512 bytes. 378 */ 379 #if CONFIG_SYS_MALLOC_LEN <= 64 + 128 * 1024 380 #warning CONFIG_SYS_MALLOC_LEN may be too small for EHCI 381 #endif 382 qtd = memalign(USB_DMA_MINALIGN, qtd_count * sizeof(struct qTD)); 383 if (qtd == NULL) { 384 printf("unable to allocate TDs\n"); 385 return -1; 386 } 387 388 memset(qh, 0, sizeof(struct QH)); 389 memset(qtd, 0, qtd_count * sizeof(*qtd)); 390 391 toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); 392 393 /* 394 * Setup QH (3.6 in ehci-r10.pdf) 395 * 396 * qh_link ................. 03-00 H 397 * qh_endpt1 ............... 07-04 H 398 * qh_endpt2 ............... 0B-08 H 399 * - qh_curtd 400 * qh_overlay.qt_next ...... 13-10 H 401 * - qh_overlay.qt_altnext 402 */ 403 qh->qh_link = cpu_to_hc32(virt_to_phys(&ctrl->qh_list) | QH_LINK_TYPE_QH); 404 c = (dev->speed != USB_SPEED_HIGH) && !usb_pipeendpoint(pipe); 405 maxpacket = usb_maxpacket(dev, pipe); 406 endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) | 407 QH_ENDPT1_MAXPKTLEN(maxpacket) | QH_ENDPT1_H(0) | 408 QH_ENDPT1_DTC(QH_ENDPT1_DTC_DT_FROM_QTD) | 409 QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) | 410 QH_ENDPT1_ENDPT(usb_pipeendpoint(pipe)) | QH_ENDPT1_I(0) | 411 QH_ENDPT1_DEVADDR(usb_pipedevice(pipe)); 412 qh->qh_endpt1 = cpu_to_hc32(endpt); 413 endpt = QH_ENDPT2_MULT(1) | QH_ENDPT2_UFCMASK(0) | QH_ENDPT2_UFSMASK(0); 414 qh->qh_endpt2 = cpu_to_hc32(endpt); 415 ehci_update_endpt2_dev_n_port(dev, qh); 416 qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 417 qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 418 419 tdp = &qh->qh_overlay.qt_next; 420 if (req != NULL) { 421 /* 422 * Setup request qTD (3.5 in ehci-r10.pdf) 423 * 424 * qt_next ................ 03-00 H 425 * qt_altnext ............. 07-04 H 426 * qt_token ............... 0B-08 H 427 * 428 * [ buffer, buffer_hi ] loaded with "req". 429 */ 430 qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 431 qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 432 token = QT_TOKEN_DT(0) | QT_TOKEN_TOTALBYTES(sizeof(*req)) | 433 QT_TOKEN_IOC(0) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | 434 QT_TOKEN_PID(QT_TOKEN_PID_SETUP) | 435 QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); 436 qtd[qtd_counter].qt_token = cpu_to_hc32(token); 437 if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req))) { 438 printf("unable to construct SETUP TD\n"); 439 goto fail; 440 } 441 /* Update previous qTD! */ 442 *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); 443 tdp = &qtd[qtd_counter++].qt_next; 444 toggle = 1; 445 } 446 447 if (length > 0 || req == NULL) { 448 uint8_t *buf_ptr = buffer; 449 int left_length = length; 450 451 do { 452 /* 453 * Determine the size of this qTD transfer. By default, 454 * QT_BUFFER_CNT full pages can be used. 455 */ 456 int xfr_bytes = QT_BUFFER_CNT * EHCI_PAGE_SIZE; 457 /* 458 * However, if the input buffer is not page-aligned, the 459 * portion of the first page before the buffer start 460 * offset within that page is unusable. 461 */ 462 xfr_bytes -= (unsigned long)buf_ptr & (EHCI_PAGE_SIZE - 1); 463 /* 464 * In order to keep each packet within a qTD transfer, 465 * align the qTD transfer size to PKT_ALIGN. 466 */ 467 xfr_bytes &= ~(PKT_ALIGN - 1); 468 /* 469 * This transfer may be shorter than the available qTD 470 * transfer size that has just been computed. 471 */ 472 xfr_bytes = min(xfr_bytes, left_length); 473 474 /* 475 * Setup request qTD (3.5 in ehci-r10.pdf) 476 * 477 * qt_next ................ 03-00 H 478 * qt_altnext ............. 07-04 H 479 * qt_token ............... 0B-08 H 480 * 481 * [ buffer, buffer_hi ] loaded with "buffer". 482 */ 483 qtd[qtd_counter].qt_next = 484 cpu_to_hc32(QT_NEXT_TERMINATE); 485 qtd[qtd_counter].qt_altnext = 486 cpu_to_hc32(QT_NEXT_TERMINATE); 487 token = QT_TOKEN_DT(toggle) | 488 QT_TOKEN_TOTALBYTES(xfr_bytes) | 489 QT_TOKEN_IOC(req == NULL) | QT_TOKEN_CPAGE(0) | 490 QT_TOKEN_CERR(3) | 491 QT_TOKEN_PID(usb_pipein(pipe) ? 492 QT_TOKEN_PID_IN : QT_TOKEN_PID_OUT) | 493 QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); 494 qtd[qtd_counter].qt_token = cpu_to_hc32(token); 495 if (ehci_td_buffer(&qtd[qtd_counter], buf_ptr, 496 xfr_bytes)) { 497 printf("unable to construct DATA TD\n"); 498 goto fail; 499 } 500 /* Update previous qTD! */ 501 *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); 502 tdp = &qtd[qtd_counter++].qt_next; 503 /* 504 * Data toggle has to be adjusted since the qTD transfer 505 * size is not always an even multiple of 506 * wMaxPacketSize. 507 */ 508 if ((xfr_bytes / maxpacket) & 1) 509 toggle ^= 1; 510 buf_ptr += xfr_bytes; 511 left_length -= xfr_bytes; 512 } while (left_length > 0); 513 } 514 515 if (req != NULL) { 516 /* 517 * Setup request qTD (3.5 in ehci-r10.pdf) 518 * 519 * qt_next ................ 03-00 H 520 * qt_altnext ............. 07-04 H 521 * qt_token ............... 0B-08 H 522 */ 523 qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 524 qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 525 token = QT_TOKEN_DT(1) | QT_TOKEN_TOTALBYTES(0) | 526 QT_TOKEN_IOC(1) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | 527 QT_TOKEN_PID(usb_pipein(pipe) ? 528 QT_TOKEN_PID_OUT : QT_TOKEN_PID_IN) | 529 QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); 530 qtd[qtd_counter].qt_token = cpu_to_hc32(token); 531 /* Update previous qTD! */ 532 *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); 533 tdp = &qtd[qtd_counter++].qt_next; 534 } 535 536 ctrl->qh_list.qh_link = cpu_to_hc32(virt_to_phys(qh) | QH_LINK_TYPE_QH); 537 538 /* Flush dcache */ 539 flush_dcache_range((unsigned long)&ctrl->qh_list, 540 ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1)); 541 flush_dcache_range((unsigned long)qh, ALIGN_END_ADDR(struct QH, qh, 1)); 542 flush_dcache_range((unsigned long)qtd, 543 ALIGN_END_ADDR(struct qTD, qtd, qtd_count)); 544 545 /* Set async. queue head pointer. */ 546 ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(&ctrl->qh_list)); 547 548 usbsts = ehci_readl(&ctrl->hcor->or_usbsts); 549 ehci_writel(&ctrl->hcor->or_usbsts, (usbsts & 0x3f)); 550 551 /* Enable async. schedule. */ 552 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 553 cmd |= CMD_ASE; 554 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 555 556 ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, STS_ASS, 557 100 * 1000); 558 if (ret < 0) { 559 printf("EHCI fail timeout STS_ASS set\n"); 560 goto fail; 561 } 562 563 /* Wait for TDs to be processed. */ 564 ts = get_timer(0); 565 vtd = &qtd[qtd_counter - 1]; 566 timeout = USB_TIMEOUT_MS(pipe); 567 do { 568 /* Invalidate dcache */ 569 invalidate_dcache_range((unsigned long)&ctrl->qh_list, 570 ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1)); 571 invalidate_dcache_range((unsigned long)qh, 572 ALIGN_END_ADDR(struct QH, qh, 1)); 573 invalidate_dcache_range((unsigned long)qtd, 574 ALIGN_END_ADDR(struct qTD, qtd, qtd_count)); 575 576 token = hc32_to_cpu(vtd->qt_token); 577 if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) 578 break; 579 WATCHDOG_RESET(); 580 } while (get_timer(ts) < timeout); 581 582 /* 583 * Invalidate the memory area occupied by buffer 584 * Don't try to fix the buffer alignment, if it isn't properly 585 * aligned it's upper layer's fault so let invalidate_dcache_range() 586 * vow about it. But we have to fix the length as it's actual 587 * transfer length and can be unaligned. This is potentially 588 * dangerous operation, it's responsibility of the calling 589 * code to make sure enough space is reserved. 590 */ 591 invalidate_dcache_range((unsigned long)buffer, 592 ALIGN((unsigned long)buffer + length, ARCH_DMA_MINALIGN)); 593 594 /* Check that the TD processing happened */ 595 if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) 596 printf("EHCI timed out on TD - token=%#x\n", token); 597 598 /* Disable async schedule. */ 599 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 600 cmd &= ~CMD_ASE; 601 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 602 603 ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, 0, 604 100 * 1000); 605 if (ret < 0) { 606 printf("EHCI fail timeout STS_ASS reset\n"); 607 goto fail; 608 } 609 610 token = hc32_to_cpu(qh->qh_overlay.qt_token); 611 if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) { 612 debug("TOKEN=%#x\n", token); 613 switch (QT_TOKEN_GET_STATUS(token) & 614 ~(QT_TOKEN_STATUS_SPLITXSTATE | QT_TOKEN_STATUS_PERR)) { 615 case 0: 616 toggle = QT_TOKEN_GET_DT(token); 617 usb_settoggle(dev, usb_pipeendpoint(pipe), 618 usb_pipeout(pipe), toggle); 619 dev->status = 0; 620 break; 621 case QT_TOKEN_STATUS_HALTED: 622 dev->status = USB_ST_STALLED; 623 break; 624 case QT_TOKEN_STATUS_ACTIVE | QT_TOKEN_STATUS_DATBUFERR: 625 case QT_TOKEN_STATUS_DATBUFERR: 626 dev->status = USB_ST_BUF_ERR; 627 break; 628 case QT_TOKEN_STATUS_HALTED | QT_TOKEN_STATUS_BABBLEDET: 629 case QT_TOKEN_STATUS_BABBLEDET: 630 dev->status = USB_ST_BABBLE_DET; 631 break; 632 default: 633 dev->status = USB_ST_CRC_ERR; 634 if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_HALTED) 635 dev->status |= USB_ST_STALLED; 636 break; 637 } 638 dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token); 639 } else { 640 dev->act_len = 0; 641 #ifndef CONFIG_USB_EHCI_FARADAY 642 debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n", 643 dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts), 644 ehci_readl(&ctrl->hcor->or_portsc[0]), 645 ehci_readl(&ctrl->hcor->or_portsc[1])); 646 #endif 647 } 648 649 free(qtd); 650 return (dev->status != USB_ST_NOT_PROC) ? 0 : -1; 651 652 fail: 653 free(qtd); 654 return -1; 655 } 656 657 static int ehci_submit_root(struct usb_device *dev, unsigned long pipe, 658 void *buffer, int length, struct devrequest *req) 659 { 660 uint8_t tmpbuf[4]; 661 u16 typeReq; 662 void *srcptr = NULL; 663 int len, srclen; 664 uint32_t reg; 665 uint32_t *status_reg; 666 int port = le16_to_cpu(req->index) & 0xff; 667 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 668 669 srclen = 0; 670 671 debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n", 672 req->request, req->request, 673 req->requesttype, req->requesttype, 674 le16_to_cpu(req->value), le16_to_cpu(req->index)); 675 676 typeReq = req->request | req->requesttype << 8; 677 678 switch (typeReq) { 679 case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8): 680 case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 681 case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 682 status_reg = ctrl->ops.get_portsc_register(ctrl, port - 1); 683 if (!status_reg) 684 return -1; 685 break; 686 default: 687 status_reg = NULL; 688 break; 689 } 690 691 switch (typeReq) { 692 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 693 switch (le16_to_cpu(req->value) >> 8) { 694 case USB_DT_DEVICE: 695 debug("USB_DT_DEVICE request\n"); 696 srcptr = &descriptor.device; 697 srclen = descriptor.device.bLength; 698 break; 699 case USB_DT_CONFIG: 700 debug("USB_DT_CONFIG config\n"); 701 srcptr = &descriptor.config; 702 srclen = descriptor.config.bLength + 703 descriptor.interface.bLength + 704 descriptor.endpoint.bLength; 705 break; 706 case USB_DT_STRING: 707 debug("USB_DT_STRING config\n"); 708 switch (le16_to_cpu(req->value) & 0xff) { 709 case 0: /* Language */ 710 srcptr = "\4\3\1\0"; 711 srclen = 4; 712 break; 713 case 1: /* Vendor */ 714 srcptr = "\16\3u\0-\0b\0o\0o\0t\0"; 715 srclen = 14; 716 break; 717 case 2: /* Product */ 718 srcptr = "\52\3E\0H\0C\0I\0 " 719 "\0H\0o\0s\0t\0 " 720 "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0"; 721 srclen = 42; 722 break; 723 default: 724 debug("unknown value DT_STRING %x\n", 725 le16_to_cpu(req->value)); 726 goto unknown; 727 } 728 break; 729 default: 730 debug("unknown value %x\n", le16_to_cpu(req->value)); 731 goto unknown; 732 } 733 break; 734 case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8): 735 switch (le16_to_cpu(req->value) >> 8) { 736 case USB_DT_HUB: 737 debug("USB_DT_HUB config\n"); 738 srcptr = &descriptor.hub; 739 srclen = descriptor.hub.bLength; 740 break; 741 default: 742 debug("unknown value %x\n", le16_to_cpu(req->value)); 743 goto unknown; 744 } 745 break; 746 case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8): 747 debug("USB_REQ_SET_ADDRESS\n"); 748 ctrl->rootdev = le16_to_cpu(req->value); 749 break; 750 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 751 debug("USB_REQ_SET_CONFIGURATION\n"); 752 /* Nothing to do */ 753 break; 754 case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8): 755 tmpbuf[0] = 1; /* USB_STATUS_SELFPOWERED */ 756 tmpbuf[1] = 0; 757 srcptr = tmpbuf; 758 srclen = 2; 759 break; 760 case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8): 761 memset(tmpbuf, 0, 4); 762 reg = ehci_readl(status_reg); 763 if (reg & EHCI_PS_CS) 764 tmpbuf[0] |= USB_PORT_STAT_CONNECTION; 765 if (reg & EHCI_PS_PE) 766 tmpbuf[0] |= USB_PORT_STAT_ENABLE; 767 if (reg & EHCI_PS_SUSP) 768 tmpbuf[0] |= USB_PORT_STAT_SUSPEND; 769 if (reg & EHCI_PS_OCA) 770 tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT; 771 if (reg & EHCI_PS_PR) 772 tmpbuf[0] |= USB_PORT_STAT_RESET; 773 if (reg & EHCI_PS_PP) 774 tmpbuf[1] |= USB_PORT_STAT_POWER >> 8; 775 776 if (ehci_is_TDI()) { 777 switch (ctrl->ops.get_port_speed(ctrl, reg)) { 778 case PORTSC_PSPD_FS: 779 break; 780 case PORTSC_PSPD_LS: 781 tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8; 782 break; 783 case PORTSC_PSPD_HS: 784 default: 785 tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; 786 break; 787 } 788 } else { 789 tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; 790 } 791 792 if (reg & EHCI_PS_CSC) 793 tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION; 794 if (reg & EHCI_PS_PEC) 795 tmpbuf[2] |= USB_PORT_STAT_C_ENABLE; 796 if (reg & EHCI_PS_OCC) 797 tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT; 798 if (ctrl->portreset & (1 << port)) 799 tmpbuf[2] |= USB_PORT_STAT_C_RESET; 800 801 srcptr = tmpbuf; 802 srclen = 4; 803 break; 804 case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 805 reg = ehci_readl(status_reg); 806 reg &= ~EHCI_PS_CLEAR; 807 switch (le16_to_cpu(req->value)) { 808 case USB_PORT_FEAT_ENABLE: 809 reg |= EHCI_PS_PE; 810 ehci_writel(status_reg, reg); 811 break; 812 case USB_PORT_FEAT_POWER: 813 if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams))) { 814 reg |= EHCI_PS_PP; 815 ehci_writel(status_reg, reg); 816 } 817 break; 818 case USB_PORT_FEAT_RESET: 819 if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) == EHCI_PS_CS && 820 !ehci_is_TDI() && 821 EHCI_PS_IS_LOWSPEED(reg)) { 822 /* Low speed device, give up ownership. */ 823 debug("port %d low speed --> companion\n", 824 port - 1); 825 reg |= EHCI_PS_PO; 826 ehci_writel(status_reg, reg); 827 return -ENXIO; 828 } else { 829 int ret; 830 831 reg |= EHCI_PS_PR; 832 reg &= ~EHCI_PS_PE; 833 ehci_writel(status_reg, reg); 834 /* 835 * caller must wait, then call GetPortStatus 836 * usb 2.0 specification say 50 ms resets on 837 * root 838 */ 839 ctrl->ops.powerup_fixup(ctrl, status_reg, ®); 840 841 ehci_writel(status_reg, reg & ~EHCI_PS_PR); 842 /* 843 * A host controller must terminate the reset 844 * and stabilize the state of the port within 845 * 2 milliseconds 846 */ 847 ret = handshake(status_reg, EHCI_PS_PR, 0, 848 2 * 1000); 849 if (!ret) { 850 reg = ehci_readl(status_reg); 851 if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) 852 == EHCI_PS_CS && !ehci_is_TDI()) { 853 debug("port %d full speed --> companion\n", port - 1); 854 reg &= ~EHCI_PS_CLEAR; 855 reg |= EHCI_PS_PO; 856 ehci_writel(status_reg, reg); 857 return -ENXIO; 858 } else { 859 ctrl->portreset |= 1 << port; 860 } 861 } else { 862 printf("port(%d) reset error\n", 863 port - 1); 864 } 865 } 866 break; 867 case USB_PORT_FEAT_TEST: 868 ehci_shutdown(ctrl); 869 reg &= ~(0xf << 16); 870 reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16; 871 ehci_writel(status_reg, reg); 872 break; 873 default: 874 debug("unknown feature %x\n", le16_to_cpu(req->value)); 875 goto unknown; 876 } 877 /* unblock posted writes */ 878 (void) ehci_readl(&ctrl->hcor->or_usbcmd); 879 break; 880 case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 881 reg = ehci_readl(status_reg); 882 reg &= ~EHCI_PS_CLEAR; 883 switch (le16_to_cpu(req->value)) { 884 case USB_PORT_FEAT_ENABLE: 885 reg &= ~EHCI_PS_PE; 886 break; 887 case USB_PORT_FEAT_C_ENABLE: 888 reg |= EHCI_PS_PE; 889 break; 890 case USB_PORT_FEAT_POWER: 891 if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams))) 892 reg &= ~EHCI_PS_PP; 893 break; 894 case USB_PORT_FEAT_C_CONNECTION: 895 reg |= EHCI_PS_CSC; 896 break; 897 case USB_PORT_FEAT_OVER_CURRENT: 898 reg |= EHCI_PS_OCC; 899 break; 900 case USB_PORT_FEAT_C_RESET: 901 ctrl->portreset &= ~(1 << port); 902 break; 903 default: 904 debug("unknown feature %x\n", le16_to_cpu(req->value)); 905 goto unknown; 906 } 907 ehci_writel(status_reg, reg); 908 /* unblock posted write */ 909 (void) ehci_readl(&ctrl->hcor->or_usbcmd); 910 break; 911 default: 912 debug("Unknown request\n"); 913 goto unknown; 914 } 915 916 mdelay(1); 917 len = min3(srclen, (int)le16_to_cpu(req->length), length); 918 if (srcptr != NULL && len > 0) 919 memcpy(buffer, srcptr, len); 920 else 921 debug("Len is 0\n"); 922 923 dev->act_len = len; 924 dev->status = 0; 925 return 0; 926 927 unknown: 928 debug("requesttype=%x, request=%x, value=%x, index=%x, length=%x\n", 929 req->requesttype, req->request, le16_to_cpu(req->value), 930 le16_to_cpu(req->index), le16_to_cpu(req->length)); 931 932 dev->act_len = 0; 933 dev->status = USB_ST_STALLED; 934 return -1; 935 } 936 937 const struct ehci_ops default_ehci_ops = { 938 .set_usb_mode = ehci_set_usbmode, 939 .get_port_speed = ehci_get_port_speed, 940 .powerup_fixup = ehci_powerup_fixup, 941 .get_portsc_register = ehci_get_portsc_register, 942 }; 943 944 static void ehci_setup_ops(struct ehci_ctrl *ctrl, const struct ehci_ops *ops) 945 { 946 if (!ops) { 947 ctrl->ops = default_ehci_ops; 948 } else { 949 ctrl->ops = *ops; 950 if (!ctrl->ops.set_usb_mode) 951 ctrl->ops.set_usb_mode = ehci_set_usbmode; 952 if (!ctrl->ops.get_port_speed) 953 ctrl->ops.get_port_speed = ehci_get_port_speed; 954 if (!ctrl->ops.powerup_fixup) 955 ctrl->ops.powerup_fixup = ehci_powerup_fixup; 956 if (!ctrl->ops.get_portsc_register) 957 ctrl->ops.get_portsc_register = 958 ehci_get_portsc_register; 959 } 960 } 961 962 #ifndef CONFIG_DM_USB 963 void ehci_set_controller_priv(int index, void *priv, const struct ehci_ops *ops) 964 { 965 struct ehci_ctrl *ctrl = &ehcic[index]; 966 967 ctrl->priv = priv; 968 ehci_setup_ops(ctrl, ops); 969 } 970 971 void *ehci_get_controller_priv(int index) 972 { 973 return ehcic[index].priv; 974 } 975 #endif 976 977 static int ehci_common_init(struct ehci_ctrl *ctrl, uint tweaks) 978 { 979 struct QH *qh_list; 980 struct QH *periodic; 981 uint32_t reg; 982 uint32_t cmd; 983 int i; 984 985 /* Set the high address word (aka segment) for 64-bit controller */ 986 if (ehci_readl(&ctrl->hccr->cr_hccparams) & 1) 987 ehci_writel(&ctrl->hcor->or_ctrldssegment, 0); 988 989 qh_list = &ctrl->qh_list; 990 991 /* Set head of reclaim list */ 992 memset(qh_list, 0, sizeof(*qh_list)); 993 qh_list->qh_link = cpu_to_hc32(virt_to_phys(qh_list) | QH_LINK_TYPE_QH); 994 qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) | 995 QH_ENDPT1_EPS(USB_SPEED_HIGH)); 996 qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 997 qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 998 qh_list->qh_overlay.qt_token = 999 cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED)); 1000 1001 flush_dcache_range((unsigned long)qh_list, 1002 ALIGN_END_ADDR(struct QH, qh_list, 1)); 1003 1004 /* Set async. queue head pointer. */ 1005 ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(qh_list)); 1006 1007 /* 1008 * Set up periodic list 1009 * Step 1: Parent QH for all periodic transfers. 1010 */ 1011 ctrl->periodic_schedules = 0; 1012 periodic = &ctrl->periodic_queue; 1013 memset(periodic, 0, sizeof(*periodic)); 1014 periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE); 1015 periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 1016 periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1017 1018 flush_dcache_range((unsigned long)periodic, 1019 ALIGN_END_ADDR(struct QH, periodic, 1)); 1020 1021 /* 1022 * Step 2: Setup frame-list: Every microframe, USB tries the same list. 1023 * In particular, device specifications on polling frequency 1024 * are disregarded. Keyboards seem to send NAK/NYet reliably 1025 * when polled with an empty buffer. 1026 * 1027 * Split Transactions will be spread across microframes using 1028 * S-mask and C-mask. 1029 */ 1030 if (ctrl->periodic_list == NULL) 1031 ctrl->periodic_list = memalign(4096, 1024 * 4); 1032 1033 if (!ctrl->periodic_list) 1034 return -ENOMEM; 1035 for (i = 0; i < 1024; i++) { 1036 ctrl->periodic_list[i] = cpu_to_hc32((unsigned long)periodic 1037 | QH_LINK_TYPE_QH); 1038 } 1039 1040 flush_dcache_range((unsigned long)ctrl->periodic_list, 1041 ALIGN_END_ADDR(uint32_t, ctrl->periodic_list, 1042 1024)); 1043 1044 /* Set periodic list base address */ 1045 ehci_writel(&ctrl->hcor->or_periodiclistbase, 1046 (unsigned long)ctrl->periodic_list); 1047 1048 reg = ehci_readl(&ctrl->hccr->cr_hcsparams); 1049 descriptor.hub.bNbrPorts = HCS_N_PORTS(reg); 1050 debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts); 1051 /* Port Indicators */ 1052 if (HCS_INDICATOR(reg)) 1053 put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics) 1054 | 0x80, &descriptor.hub.wHubCharacteristics); 1055 /* Port Power Control */ 1056 if (HCS_PPC(reg)) 1057 put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics) 1058 | 0x01, &descriptor.hub.wHubCharacteristics); 1059 1060 /* Start the host controller. */ 1061 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 1062 /* 1063 * Philips, Intel, and maybe others need CMD_RUN before the 1064 * root hub will detect new devices (why?); NEC doesn't 1065 */ 1066 cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); 1067 cmd |= CMD_RUN; 1068 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 1069 1070 if (!(tweaks & EHCI_TWEAK_NO_INIT_CF)) { 1071 /* take control over the ports */ 1072 cmd = ehci_readl(&ctrl->hcor->or_configflag); 1073 cmd |= FLAG_CF; 1074 ehci_writel(&ctrl->hcor->or_configflag, cmd); 1075 } 1076 1077 /* unblock posted write */ 1078 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 1079 mdelay(5); 1080 reg = HC_VERSION(ehci_readl(&ctrl->hccr->cr_capbase)); 1081 printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff); 1082 1083 return 0; 1084 } 1085 1086 #ifndef CONFIG_DM_USB 1087 int usb_lowlevel_stop(int index) 1088 { 1089 ehci_shutdown(&ehcic[index]); 1090 return ehci_hcd_stop(index); 1091 } 1092 1093 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) 1094 { 1095 struct ehci_ctrl *ctrl = &ehcic[index]; 1096 uint tweaks = 0; 1097 int rc; 1098 1099 /** 1100 * Set ops to default_ehci_ops, ehci_hcd_init should call 1101 * ehci_set_controller_priv to change any of these function pointers. 1102 */ 1103 ctrl->ops = default_ehci_ops; 1104 1105 rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor); 1106 if (rc) 1107 return rc; 1108 if (init == USB_INIT_DEVICE) 1109 goto done; 1110 1111 /* EHCI spec section 4.1 */ 1112 if (ehci_reset(ctrl)) 1113 return -1; 1114 1115 #if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET) 1116 rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor); 1117 if (rc) 1118 return rc; 1119 #endif 1120 #ifdef CONFIG_USB_EHCI_FARADAY 1121 tweaks |= EHCI_TWEAK_NO_INIT_CF; 1122 #endif 1123 rc = ehci_common_init(ctrl, tweaks); 1124 if (rc) 1125 return rc; 1126 1127 ctrl->rootdev = 0; 1128 done: 1129 *controller = &ehcic[index]; 1130 return 0; 1131 } 1132 #endif 1133 1134 static int _ehci_submit_bulk_msg(struct usb_device *dev, unsigned long pipe, 1135 void *buffer, int length) 1136 { 1137 1138 if (usb_pipetype(pipe) != PIPE_BULK) { 1139 debug("non-bulk pipe (type=%lu)", usb_pipetype(pipe)); 1140 return -1; 1141 } 1142 return ehci_submit_async(dev, pipe, buffer, length, NULL); 1143 } 1144 1145 static int _ehci_submit_control_msg(struct usb_device *dev, unsigned long pipe, 1146 void *buffer, int length, 1147 struct devrequest *setup) 1148 { 1149 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 1150 1151 if (usb_pipetype(pipe) != PIPE_CONTROL) { 1152 debug("non-control pipe (type=%lu)", usb_pipetype(pipe)); 1153 return -1; 1154 } 1155 1156 if (usb_pipedevice(pipe) == ctrl->rootdev) { 1157 if (!ctrl->rootdev) 1158 dev->speed = USB_SPEED_HIGH; 1159 return ehci_submit_root(dev, pipe, buffer, length, setup); 1160 } 1161 return ehci_submit_async(dev, pipe, buffer, length, setup); 1162 } 1163 1164 struct int_queue { 1165 int elementsize; 1166 unsigned long pipe; 1167 struct QH *first; 1168 struct QH *current; 1169 struct QH *last; 1170 struct qTD *tds; 1171 }; 1172 1173 #define NEXT_QH(qh) (struct QH *)((unsigned long)hc32_to_cpu((qh)->qh_link) & ~0x1f) 1174 1175 static int 1176 enable_periodic(struct ehci_ctrl *ctrl) 1177 { 1178 uint32_t cmd; 1179 struct ehci_hcor *hcor = ctrl->hcor; 1180 int ret; 1181 1182 cmd = ehci_readl(&hcor->or_usbcmd); 1183 cmd |= CMD_PSE; 1184 ehci_writel(&hcor->or_usbcmd, cmd); 1185 1186 ret = handshake((uint32_t *)&hcor->or_usbsts, 1187 STS_PSS, STS_PSS, 100 * 1000); 1188 if (ret < 0) { 1189 printf("EHCI failed: timeout when enabling periodic list\n"); 1190 return -ETIMEDOUT; 1191 } 1192 udelay(1000); 1193 return 0; 1194 } 1195 1196 static int 1197 disable_periodic(struct ehci_ctrl *ctrl) 1198 { 1199 uint32_t cmd; 1200 struct ehci_hcor *hcor = ctrl->hcor; 1201 int ret; 1202 1203 cmd = ehci_readl(&hcor->or_usbcmd); 1204 cmd &= ~CMD_PSE; 1205 ehci_writel(&hcor->or_usbcmd, cmd); 1206 1207 ret = handshake((uint32_t *)&hcor->or_usbsts, 1208 STS_PSS, 0, 100 * 1000); 1209 if (ret < 0) { 1210 printf("EHCI failed: timeout when disabling periodic list\n"); 1211 return -ETIMEDOUT; 1212 } 1213 return 0; 1214 } 1215 1216 static struct int_queue *_ehci_create_int_queue(struct usb_device *dev, 1217 unsigned long pipe, int queuesize, int elementsize, 1218 void *buffer, int interval) 1219 { 1220 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 1221 struct int_queue *result = NULL; 1222 uint32_t i, toggle; 1223 1224 /* 1225 * Interrupt transfers requiring several transactions are not supported 1226 * because bInterval is ignored. 1227 * 1228 * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2 1229 * <= PKT_ALIGN if several qTDs are required, while the USB 1230 * specification does not constrain this for interrupt transfers. That 1231 * means that ehci_submit_async() would support interrupt transfers 1232 * requiring several transactions only as long as the transfer size does 1233 * not require more than a single qTD. 1234 */ 1235 if (elementsize > usb_maxpacket(dev, pipe)) { 1236 printf("%s: xfers requiring several transactions are not supported.\n", 1237 __func__); 1238 return NULL; 1239 } 1240 1241 debug("Enter create_int_queue\n"); 1242 if (usb_pipetype(pipe) != PIPE_INTERRUPT) { 1243 debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe)); 1244 return NULL; 1245 } 1246 1247 /* limit to 4 full pages worth of data - 1248 * we can safely fit them in a single TD, 1249 * no matter the alignment 1250 */ 1251 if (elementsize >= 16384) { 1252 debug("too large elements for interrupt transfers\n"); 1253 return NULL; 1254 } 1255 1256 result = malloc(sizeof(*result)); 1257 if (!result) { 1258 debug("ehci intr queue: out of memory\n"); 1259 goto fail1; 1260 } 1261 result->elementsize = elementsize; 1262 result->pipe = pipe; 1263 result->first = memalign(USB_DMA_MINALIGN, 1264 sizeof(struct QH) * queuesize); 1265 if (!result->first) { 1266 debug("ehci intr queue: out of memory\n"); 1267 goto fail2; 1268 } 1269 result->current = result->first; 1270 result->last = result->first + queuesize - 1; 1271 result->tds = memalign(USB_DMA_MINALIGN, 1272 sizeof(struct qTD) * queuesize); 1273 if (!result->tds) { 1274 debug("ehci intr queue: out of memory\n"); 1275 goto fail3; 1276 } 1277 memset(result->first, 0, sizeof(struct QH) * queuesize); 1278 memset(result->tds, 0, sizeof(struct qTD) * queuesize); 1279 1280 toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); 1281 1282 for (i = 0; i < queuesize; i++) { 1283 struct QH *qh = result->first + i; 1284 struct qTD *td = result->tds + i; 1285 void **buf = &qh->buffer; 1286 1287 qh->qh_link = cpu_to_hc32((unsigned long)(qh+1) | QH_LINK_TYPE_QH); 1288 if (i == queuesize - 1) 1289 qh->qh_link = cpu_to_hc32(QH_LINK_TERMINATE); 1290 1291 qh->qh_overlay.qt_next = cpu_to_hc32((unsigned long)td); 1292 qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1293 qh->qh_endpt1 = 1294 cpu_to_hc32((0 << 28) | /* No NAK reload (ehci 4.9) */ 1295 (usb_maxpacket(dev, pipe) << 16) | /* MPS */ 1296 (1 << 14) | 1297 QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) | 1298 (usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */ 1299 (usb_pipedevice(pipe) << 0)); 1300 qh->qh_endpt2 = cpu_to_hc32((1 << 30) | /* 1 Tx per mframe */ 1301 (1 << 0)); /* S-mask: microframe 0 */ 1302 if (dev->speed == USB_SPEED_LOW || 1303 dev->speed == USB_SPEED_FULL) { 1304 /* C-mask: microframes 2-4 */ 1305 qh->qh_endpt2 |= cpu_to_hc32((0x1c << 8)); 1306 } 1307 ehci_update_endpt2_dev_n_port(dev, qh); 1308 1309 td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 1310 td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1311 debug("communication direction is '%s'\n", 1312 usb_pipein(pipe) ? "in" : "out"); 1313 td->qt_token = cpu_to_hc32( 1314 QT_TOKEN_DT(toggle) | 1315 (elementsize << 16) | 1316 ((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */ 1317 0x80); /* active */ 1318 td->qt_buffer[0] = 1319 cpu_to_hc32((unsigned long)buffer + i * elementsize); 1320 td->qt_buffer[1] = 1321 cpu_to_hc32((td->qt_buffer[0] + 0x1000) & ~0xfff); 1322 td->qt_buffer[2] = 1323 cpu_to_hc32((td->qt_buffer[0] + 0x2000) & ~0xfff); 1324 td->qt_buffer[3] = 1325 cpu_to_hc32((td->qt_buffer[0] + 0x3000) & ~0xfff); 1326 td->qt_buffer[4] = 1327 cpu_to_hc32((td->qt_buffer[0] + 0x4000) & ~0xfff); 1328 1329 *buf = buffer + i * elementsize; 1330 toggle ^= 1; 1331 } 1332 1333 flush_dcache_range((unsigned long)buffer, 1334 ALIGN_END_ADDR(char, buffer, 1335 queuesize * elementsize)); 1336 flush_dcache_range((unsigned long)result->first, 1337 ALIGN_END_ADDR(struct QH, result->first, 1338 queuesize)); 1339 flush_dcache_range((unsigned long)result->tds, 1340 ALIGN_END_ADDR(struct qTD, result->tds, 1341 queuesize)); 1342 1343 if (ctrl->periodic_schedules > 0) { 1344 if (disable_periodic(ctrl) < 0) { 1345 debug("FATAL: periodic should never fail, but did"); 1346 goto fail3; 1347 } 1348 } 1349 1350 /* hook up to periodic list */ 1351 struct QH *list = &ctrl->periodic_queue; 1352 result->last->qh_link = list->qh_link; 1353 list->qh_link = cpu_to_hc32((unsigned long)result->first | QH_LINK_TYPE_QH); 1354 1355 flush_dcache_range((unsigned long)result->last, 1356 ALIGN_END_ADDR(struct QH, result->last, 1)); 1357 flush_dcache_range((unsigned long)list, 1358 ALIGN_END_ADDR(struct QH, list, 1)); 1359 1360 if (enable_periodic(ctrl) < 0) { 1361 debug("FATAL: periodic should never fail, but did"); 1362 goto fail3; 1363 } 1364 ctrl->periodic_schedules++; 1365 1366 debug("Exit create_int_queue\n"); 1367 return result; 1368 fail3: 1369 if (result->tds) 1370 free(result->tds); 1371 fail2: 1372 if (result->first) 1373 free(result->first); 1374 if (result) 1375 free(result); 1376 fail1: 1377 return NULL; 1378 } 1379 1380 static void *_ehci_poll_int_queue(struct usb_device *dev, 1381 struct int_queue *queue) 1382 { 1383 struct QH *cur = queue->current; 1384 struct qTD *cur_td; 1385 uint32_t token, toggle; 1386 unsigned long pipe = queue->pipe; 1387 1388 /* depleted queue */ 1389 if (cur == NULL) { 1390 debug("Exit poll_int_queue with completed queue\n"); 1391 return NULL; 1392 } 1393 /* still active */ 1394 cur_td = &queue->tds[queue->current - queue->first]; 1395 invalidate_dcache_range((unsigned long)cur_td, 1396 ALIGN_END_ADDR(struct qTD, cur_td, 1)); 1397 token = hc32_to_cpu(cur_td->qt_token); 1398 if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) { 1399 debug("Exit poll_int_queue with no completed intr transfer. token is %x\n", token); 1400 return NULL; 1401 } 1402 1403 toggle = QT_TOKEN_GET_DT(token); 1404 usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle); 1405 1406 if (!(cur->qh_link & QH_LINK_TERMINATE)) 1407 queue->current++; 1408 else 1409 queue->current = NULL; 1410 1411 invalidate_dcache_range((unsigned long)cur->buffer, 1412 ALIGN_END_ADDR(char, cur->buffer, 1413 queue->elementsize)); 1414 1415 debug("Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n", 1416 token, cur, queue->first); 1417 return cur->buffer; 1418 } 1419 1420 /* Do not free buffers associated with QHs, they're owned by someone else */ 1421 static int _ehci_destroy_int_queue(struct usb_device *dev, 1422 struct int_queue *queue) 1423 { 1424 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 1425 int result = -1; 1426 unsigned long timeout; 1427 1428 if (disable_periodic(ctrl) < 0) { 1429 debug("FATAL: periodic should never fail, but did"); 1430 goto out; 1431 } 1432 ctrl->periodic_schedules--; 1433 1434 struct QH *cur = &ctrl->periodic_queue; 1435 timeout = get_timer(0) + 500; /* abort after 500ms */ 1436 while (!(cur->qh_link & cpu_to_hc32(QH_LINK_TERMINATE))) { 1437 debug("considering %p, with qh_link %x\n", cur, cur->qh_link); 1438 if (NEXT_QH(cur) == queue->first) { 1439 debug("found candidate. removing from chain\n"); 1440 cur->qh_link = queue->last->qh_link; 1441 flush_dcache_range((unsigned long)cur, 1442 ALIGN_END_ADDR(struct QH, cur, 1)); 1443 result = 0; 1444 break; 1445 } 1446 cur = NEXT_QH(cur); 1447 if (get_timer(0) > timeout) { 1448 printf("Timeout destroying interrupt endpoint queue\n"); 1449 result = -1; 1450 goto out; 1451 } 1452 } 1453 1454 if (ctrl->periodic_schedules > 0) { 1455 result = enable_periodic(ctrl); 1456 if (result < 0) 1457 debug("FATAL: periodic should never fail, but did"); 1458 } 1459 1460 out: 1461 free(queue->tds); 1462 free(queue->first); 1463 free(queue); 1464 1465 return result; 1466 } 1467 1468 static int _ehci_submit_int_msg(struct usb_device *dev, unsigned long pipe, 1469 void *buffer, int length, int interval) 1470 { 1471 void *backbuffer; 1472 struct int_queue *queue; 1473 unsigned long timeout; 1474 int result = 0, ret; 1475 1476 debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d", 1477 dev, pipe, buffer, length, interval); 1478 1479 queue = _ehci_create_int_queue(dev, pipe, 1, length, buffer, interval); 1480 if (!queue) 1481 return -1; 1482 1483 timeout = get_timer(0) + USB_TIMEOUT_MS(pipe); 1484 while ((backbuffer = _ehci_poll_int_queue(dev, queue)) == NULL) 1485 if (get_timer(0) > timeout) { 1486 printf("Timeout poll on interrupt endpoint\n"); 1487 result = -ETIMEDOUT; 1488 break; 1489 } 1490 1491 if (backbuffer != buffer) { 1492 debug("got wrong buffer back (%p instead of %p)\n", 1493 backbuffer, buffer); 1494 return -EINVAL; 1495 } 1496 1497 ret = _ehci_destroy_int_queue(dev, queue); 1498 if (ret < 0) 1499 return ret; 1500 1501 /* everything worked out fine */ 1502 return result; 1503 } 1504 1505 #ifndef CONFIG_DM_USB 1506 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, 1507 void *buffer, int length) 1508 { 1509 return _ehci_submit_bulk_msg(dev, pipe, buffer, length); 1510 } 1511 1512 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1513 int length, struct devrequest *setup) 1514 { 1515 return _ehci_submit_control_msg(dev, pipe, buffer, length, setup); 1516 } 1517 1518 int submit_int_msg(struct usb_device *dev, unsigned long pipe, 1519 void *buffer, int length, int interval) 1520 { 1521 return _ehci_submit_int_msg(dev, pipe, buffer, length, interval); 1522 } 1523 1524 struct int_queue *create_int_queue(struct usb_device *dev, 1525 unsigned long pipe, int queuesize, int elementsize, 1526 void *buffer, int interval) 1527 { 1528 return _ehci_create_int_queue(dev, pipe, queuesize, elementsize, 1529 buffer, interval); 1530 } 1531 1532 void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) 1533 { 1534 return _ehci_poll_int_queue(dev, queue); 1535 } 1536 1537 int destroy_int_queue(struct usb_device *dev, struct int_queue *queue) 1538 { 1539 return _ehci_destroy_int_queue(dev, queue); 1540 } 1541 #endif 1542 1543 #ifdef CONFIG_DM_USB 1544 static int ehci_submit_control_msg(struct udevice *dev, struct usb_device *udev, 1545 unsigned long pipe, void *buffer, int length, 1546 struct devrequest *setup) 1547 { 1548 debug("%s: dev='%s', udev=%p, udev->dev='%s', portnr=%d\n", __func__, 1549 dev->name, udev, udev->dev->name, udev->portnr); 1550 1551 return _ehci_submit_control_msg(udev, pipe, buffer, length, setup); 1552 } 1553 1554 static int ehci_submit_bulk_msg(struct udevice *dev, struct usb_device *udev, 1555 unsigned long pipe, void *buffer, int length) 1556 { 1557 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1558 return _ehci_submit_bulk_msg(udev, pipe, buffer, length); 1559 } 1560 1561 static int ehci_submit_int_msg(struct udevice *dev, struct usb_device *udev, 1562 unsigned long pipe, void *buffer, int length, 1563 int interval) 1564 { 1565 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1566 return _ehci_submit_int_msg(udev, pipe, buffer, length, interval); 1567 } 1568 1569 static struct int_queue *ehci_create_int_queue(struct udevice *dev, 1570 struct usb_device *udev, unsigned long pipe, int queuesize, 1571 int elementsize, void *buffer, int interval) 1572 { 1573 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1574 return _ehci_create_int_queue(udev, pipe, queuesize, elementsize, 1575 buffer, interval); 1576 } 1577 1578 static void *ehci_poll_int_queue(struct udevice *dev, struct usb_device *udev, 1579 struct int_queue *queue) 1580 { 1581 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1582 return _ehci_poll_int_queue(udev, queue); 1583 } 1584 1585 static int ehci_destroy_int_queue(struct udevice *dev, struct usb_device *udev, 1586 struct int_queue *queue) 1587 { 1588 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1589 return _ehci_destroy_int_queue(udev, queue); 1590 } 1591 1592 int ehci_register(struct udevice *dev, struct ehci_hccr *hccr, 1593 struct ehci_hcor *hcor, const struct ehci_ops *ops, 1594 uint tweaks, enum usb_init_type init) 1595 { 1596 struct usb_bus_priv *priv = dev_get_uclass_priv(dev); 1597 struct ehci_ctrl *ctrl = dev_get_priv(dev); 1598 int ret; 1599 1600 debug("%s: dev='%s', ctrl=%p, hccr=%p, hcor=%p, init=%d\n", __func__, 1601 dev->name, ctrl, hccr, hcor, init); 1602 1603 priv->desc_before_addr = true; 1604 1605 ehci_setup_ops(ctrl, ops); 1606 ctrl->hccr = hccr; 1607 ctrl->hcor = hcor; 1608 ctrl->priv = ctrl; 1609 1610 ctrl->init = init; 1611 if (ctrl->init == USB_INIT_DEVICE) 1612 goto done; 1613 1614 ret = ehci_reset(ctrl); 1615 if (ret) 1616 goto err; 1617 1618 ret = ehci_common_init(ctrl, tweaks); 1619 if (ret) 1620 goto err; 1621 done: 1622 return 0; 1623 err: 1624 free(ctrl); 1625 debug("%s: failed, ret=%d\n", __func__, ret); 1626 return ret; 1627 } 1628 1629 int ehci_deregister(struct udevice *dev) 1630 { 1631 struct ehci_ctrl *ctrl = dev_get_priv(dev); 1632 1633 if (ctrl->init == USB_INIT_DEVICE) 1634 return 0; 1635 1636 ehci_shutdown(ctrl); 1637 1638 return 0; 1639 } 1640 1641 struct dm_usb_ops ehci_usb_ops = { 1642 .control = ehci_submit_control_msg, 1643 .bulk = ehci_submit_bulk_msg, 1644 .interrupt = ehci_submit_int_msg, 1645 .create_int_queue = ehci_create_int_queue, 1646 .poll_int_queue = ehci_poll_int_queue, 1647 .destroy_int_queue = ehci_destroy_int_queue, 1648 }; 1649 1650 #endif 1651