1 // SPDX-License-Identifier: GPL-2.0 2 /*- 3 * Copyright (c) 2007-2008, Juniper Networks, Inc. 4 * Copyright (c) 2008, Excito Elektronik i Skåne AB 5 * Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it> 6 * 7 * All rights reserved. 8 */ 9 #include <common.h> 10 #include <dm.h> 11 #include <errno.h> 12 #include <asm/byteorder.h> 13 #include <asm/unaligned.h> 14 #include <usb.h> 15 #include <asm/io.h> 16 #include <malloc.h> 17 #include <memalign.h> 18 #include <watchdog.h> 19 #include <linux/compiler.h> 20 21 #include "ehci.h" 22 23 #ifndef CONFIG_USB_MAX_CONTROLLER_COUNT 24 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 25 #endif 26 27 /* 28 * EHCI spec page 20 says that the HC may take up to 16 uFrames (= 4ms) to halt. 29 * Let's time out after 8 to have a little safety margin on top of that. 30 */ 31 #define HCHALT_TIMEOUT (8 * 1000) 32 33 #ifndef CONFIG_DM_USB 34 static struct ehci_ctrl ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT]; 35 #endif 36 37 #define ALIGN_END_ADDR(type, ptr, size) \ 38 ((unsigned long)(ptr) + roundup((size) * sizeof(type), USB_DMA_MINALIGN)) 39 40 static struct descriptor { 41 struct usb_hub_descriptor hub; 42 struct usb_device_descriptor device; 43 struct usb_linux_config_descriptor config; 44 struct usb_linux_interface_descriptor interface; 45 struct usb_endpoint_descriptor endpoint; 46 } __attribute__ ((packed)) descriptor = { 47 { 48 0x8, /* bDescLength */ 49 0x29, /* bDescriptorType: hub descriptor */ 50 2, /* bNrPorts -- runtime modified */ 51 0, /* wHubCharacteristics */ 52 10, /* bPwrOn2PwrGood */ 53 0, /* bHubCntrCurrent */ 54 { /* Device removable */ 55 } /* at most 7 ports! XXX */ 56 }, 57 { 58 0x12, /* bLength */ 59 1, /* bDescriptorType: UDESC_DEVICE */ 60 cpu_to_le16(0x0200), /* bcdUSB: v2.0 */ 61 9, /* bDeviceClass: UDCLASS_HUB */ 62 0, /* bDeviceSubClass: UDSUBCLASS_HUB */ 63 1, /* bDeviceProtocol: UDPROTO_HSHUBSTT */ 64 64, /* bMaxPacketSize: 64 bytes */ 65 0x0000, /* idVendor */ 66 0x0000, /* idProduct */ 67 cpu_to_le16(0x0100), /* bcdDevice */ 68 1, /* iManufacturer */ 69 2, /* iProduct */ 70 0, /* iSerialNumber */ 71 1 /* bNumConfigurations: 1 */ 72 }, 73 { 74 0x9, 75 2, /* bDescriptorType: UDESC_CONFIG */ 76 cpu_to_le16(0x19), 77 1, /* bNumInterface */ 78 1, /* bConfigurationValue */ 79 0, /* iConfiguration */ 80 0x40, /* bmAttributes: UC_SELF_POWER */ 81 0 /* bMaxPower */ 82 }, 83 { 84 0x9, /* bLength */ 85 4, /* bDescriptorType: UDESC_INTERFACE */ 86 0, /* bInterfaceNumber */ 87 0, /* bAlternateSetting */ 88 1, /* bNumEndpoints */ 89 9, /* bInterfaceClass: UICLASS_HUB */ 90 0, /* bInterfaceSubClass: UISUBCLASS_HUB */ 91 0, /* bInterfaceProtocol: UIPROTO_HSHUBSTT */ 92 0 /* iInterface */ 93 }, 94 { 95 0x7, /* bLength */ 96 5, /* bDescriptorType: UDESC_ENDPOINT */ 97 0x81, /* bEndpointAddress: 98 * UE_DIR_IN | EHCI_INTR_ENDPT 99 */ 100 3, /* bmAttributes: UE_INTERRUPT */ 101 8, /* wMaxPacketSize */ 102 255 /* bInterval */ 103 }, 104 }; 105 106 #if defined(CONFIG_EHCI_IS_TDI) 107 #define ehci_is_TDI() (1) 108 #else 109 #define ehci_is_TDI() (0) 110 #endif 111 112 static struct ehci_ctrl *ehci_get_ctrl(struct usb_device *udev) 113 { 114 #ifdef CONFIG_DM_USB 115 return dev_get_priv(usb_get_bus(udev->dev)); 116 #else 117 return udev->controller; 118 #endif 119 } 120 121 static int ehci_get_port_speed(struct ehci_ctrl *ctrl, uint32_t reg) 122 { 123 return PORTSC_PSPD(reg); 124 } 125 126 static void ehci_set_usbmode(struct ehci_ctrl *ctrl) 127 { 128 uint32_t tmp; 129 uint32_t *reg_ptr; 130 131 reg_ptr = (uint32_t *)((u8 *)&ctrl->hcor->or_usbcmd + USBMODE); 132 tmp = ehci_readl(reg_ptr); 133 tmp |= USBMODE_CM_HC; 134 #if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN) 135 tmp |= USBMODE_BE; 136 #else 137 tmp &= ~USBMODE_BE; 138 #endif 139 ehci_writel(reg_ptr, tmp); 140 } 141 142 static void ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg, 143 uint32_t *reg) 144 { 145 mdelay(50); 146 } 147 148 static uint32_t *ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port) 149 { 150 int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams)); 151 152 if (port < 0 || port >= max_ports) { 153 /* Printing the message would cause a scan failure! */ 154 debug("The request port(%u) exceeds maximum port number\n", 155 port); 156 return NULL; 157 } 158 159 return (uint32_t *)&ctrl->hcor->or_portsc[port]; 160 } 161 162 static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) 163 { 164 uint32_t result; 165 do { 166 result = ehci_readl(ptr); 167 udelay(5); 168 if (result == ~(uint32_t)0) 169 return -1; 170 result &= mask; 171 if (result == done) 172 return 0; 173 usec--; 174 } while (usec > 0); 175 return -1; 176 } 177 178 static int ehci_reset(struct ehci_ctrl *ctrl) 179 { 180 uint32_t cmd; 181 int ret = 0; 182 183 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 184 cmd = (cmd & ~CMD_RUN) | CMD_RESET; 185 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 186 ret = handshake((uint32_t *)&ctrl->hcor->or_usbcmd, 187 CMD_RESET, 0, 250 * 1000); 188 if (ret < 0) { 189 printf("EHCI fail to reset\n"); 190 goto out; 191 } 192 193 if (ehci_is_TDI()) 194 ctrl->ops.set_usb_mode(ctrl); 195 196 #ifdef CONFIG_USB_EHCI_TXFIFO_THRESH 197 cmd = ehci_readl(&ctrl->hcor->or_txfilltuning); 198 cmd &= ~TXFIFO_THRESH_MASK; 199 cmd |= TXFIFO_THRESH(CONFIG_USB_EHCI_TXFIFO_THRESH); 200 ehci_writel(&ctrl->hcor->or_txfilltuning, cmd); 201 #endif 202 out: 203 return ret; 204 } 205 206 static int ehci_shutdown(struct ehci_ctrl *ctrl) 207 { 208 int i, ret = 0; 209 uint32_t cmd, reg; 210 int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams)); 211 212 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 213 /* If not run, directly return */ 214 if (!(cmd & CMD_RUN)) 215 return 0; 216 cmd &= ~(CMD_PSE | CMD_ASE); 217 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 218 ret = handshake(&ctrl->hcor->or_usbsts, STS_ASS | STS_PSS, 0, 219 100 * 1000); 220 221 if (!ret) { 222 for (i = 0; i < max_ports; i++) { 223 reg = ehci_readl(&ctrl->hcor->or_portsc[i]); 224 reg |= EHCI_PS_SUSP; 225 ehci_writel(&ctrl->hcor->or_portsc[i], reg); 226 } 227 228 cmd &= ~CMD_RUN; 229 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 230 ret = handshake(&ctrl->hcor->or_usbsts, STS_HALT, STS_HALT, 231 HCHALT_TIMEOUT); 232 } 233 234 if (ret) 235 puts("EHCI failed to shut down host controller.\n"); 236 237 return ret; 238 } 239 240 static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz) 241 { 242 uint32_t delta, next; 243 unsigned long addr = (unsigned long)buf; 244 int idx; 245 246 if (addr != ALIGN(addr, ARCH_DMA_MINALIGN)) 247 debug("EHCI-HCD: Misaligned buffer address (%p)\n", buf); 248 249 flush_dcache_range(addr, ALIGN(addr + sz, ARCH_DMA_MINALIGN)); 250 251 idx = 0; 252 while (idx < QT_BUFFER_CNT) { 253 td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys((void *)addr)); 254 td->qt_buffer_hi[idx] = 0; 255 next = (addr + EHCI_PAGE_SIZE) & ~(EHCI_PAGE_SIZE - 1); 256 delta = next - addr; 257 if (delta >= sz) 258 break; 259 sz -= delta; 260 addr = next; 261 idx++; 262 } 263 264 if (idx == QT_BUFFER_CNT) { 265 printf("out of buffer pointers (%zu bytes left)\n", sz); 266 return -1; 267 } 268 269 return 0; 270 } 271 272 static inline u8 ehci_encode_speed(enum usb_device_speed speed) 273 { 274 #define QH_HIGH_SPEED 2 275 #define QH_FULL_SPEED 0 276 #define QH_LOW_SPEED 1 277 if (speed == USB_SPEED_HIGH) 278 return QH_HIGH_SPEED; 279 if (speed == USB_SPEED_LOW) 280 return QH_LOW_SPEED; 281 return QH_FULL_SPEED; 282 } 283 284 static void ehci_update_endpt2_dev_n_port(struct usb_device *udev, 285 struct QH *qh) 286 { 287 uint8_t portnr = 0; 288 uint8_t hubaddr = 0; 289 290 if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL) 291 return; 292 293 usb_find_usb2_hub_address_port(udev, &hubaddr, &portnr); 294 295 qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(portnr) | 296 QH_ENDPT2_HUBADDR(hubaddr)); 297 } 298 299 static int 300 ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, 301 int length, struct devrequest *req) 302 { 303 ALLOC_ALIGN_BUFFER(struct QH, qh, 1, USB_DMA_MINALIGN); 304 struct qTD *qtd; 305 int qtd_count = 0; 306 int qtd_counter = 0; 307 volatile struct qTD *vtd; 308 unsigned long ts; 309 uint32_t *tdp; 310 uint32_t endpt, maxpacket, token, usbsts; 311 uint32_t c, toggle; 312 uint32_t cmd; 313 int timeout; 314 int ret = 0; 315 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 316 317 debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n", dev, pipe, 318 buffer, length, req); 319 if (req != NULL) 320 debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n", 321 req->request, req->request, 322 req->requesttype, req->requesttype, 323 le16_to_cpu(req->value), le16_to_cpu(req->value), 324 le16_to_cpu(req->index)); 325 326 #define PKT_ALIGN 512 327 /* 328 * The USB transfer is split into qTD transfers. Eeach qTD transfer is 329 * described by a transfer descriptor (the qTD). The qTDs form a linked 330 * list with a queue head (QH). 331 * 332 * Each qTD transfer starts with a new USB packet, i.e. a packet cannot 333 * have its beginning in a qTD transfer and its end in the following 334 * one, so the qTD transfer lengths have to be chosen accordingly. 335 * 336 * Each qTD transfer uses up to QT_BUFFER_CNT data buffers, mapped to 337 * single pages. The first data buffer can start at any offset within a 338 * page (not considering the cache-line alignment issues), while the 339 * following buffers must be page-aligned. There is no alignment 340 * constraint on the size of a qTD transfer. 341 */ 342 if (req != NULL) 343 /* 1 qTD will be needed for SETUP, and 1 for ACK. */ 344 qtd_count += 1 + 1; 345 if (length > 0 || req == NULL) { 346 /* 347 * Determine the qTD transfer size that will be used for the 348 * data payload (not considering the first qTD transfer, which 349 * may be longer or shorter, and the final one, which may be 350 * shorter). 351 * 352 * In order to keep each packet within a qTD transfer, the qTD 353 * transfer size is aligned to PKT_ALIGN, which is a multiple of 354 * wMaxPacketSize (except in some cases for interrupt transfers, 355 * see comment in submit_int_msg()). 356 * 357 * By default, i.e. if the input buffer is aligned to PKT_ALIGN, 358 * QT_BUFFER_CNT full pages will be used. 359 */ 360 int xfr_sz = QT_BUFFER_CNT; 361 /* 362 * However, if the input buffer is not aligned to PKT_ALIGN, the 363 * qTD transfer size will be one page shorter, and the first qTD 364 * data buffer of each transfer will be page-unaligned. 365 */ 366 if ((unsigned long)buffer & (PKT_ALIGN - 1)) 367 xfr_sz--; 368 /* Convert the qTD transfer size to bytes. */ 369 xfr_sz *= EHCI_PAGE_SIZE; 370 /* 371 * Approximate by excess the number of qTDs that will be 372 * required for the data payload. The exact formula is way more 373 * complicated and saves at most 2 qTDs, i.e. a total of 128 374 * bytes. 375 */ 376 qtd_count += 2 + length / xfr_sz; 377 } 378 /* 379 * Threshold value based on the worst-case total size of the allocated qTDs for 380 * a mass-storage transfer of 65535 blocks of 512 bytes. 381 */ 382 #if CONFIG_SYS_MALLOC_LEN <= 64 + 128 * 1024 383 #warning CONFIG_SYS_MALLOC_LEN may be too small for EHCI 384 #endif 385 qtd = memalign(USB_DMA_MINALIGN, qtd_count * sizeof(struct qTD)); 386 if (qtd == NULL) { 387 printf("unable to allocate TDs\n"); 388 return -1; 389 } 390 391 memset(qh, 0, sizeof(struct QH)); 392 memset(qtd, 0, qtd_count * sizeof(*qtd)); 393 394 toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); 395 396 /* 397 * Setup QH (3.6 in ehci-r10.pdf) 398 * 399 * qh_link ................. 03-00 H 400 * qh_endpt1 ............... 07-04 H 401 * qh_endpt2 ............... 0B-08 H 402 * - qh_curtd 403 * qh_overlay.qt_next ...... 13-10 H 404 * - qh_overlay.qt_altnext 405 */ 406 qh->qh_link = cpu_to_hc32(virt_to_phys(&ctrl->qh_list) | QH_LINK_TYPE_QH); 407 c = (dev->speed != USB_SPEED_HIGH) && !usb_pipeendpoint(pipe); 408 maxpacket = usb_maxpacket(dev, pipe); 409 endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) | 410 QH_ENDPT1_MAXPKTLEN(maxpacket) | QH_ENDPT1_H(0) | 411 QH_ENDPT1_DTC(QH_ENDPT1_DTC_DT_FROM_QTD) | 412 QH_ENDPT1_ENDPT(usb_pipeendpoint(pipe)) | QH_ENDPT1_I(0) | 413 QH_ENDPT1_DEVADDR(usb_pipedevice(pipe)); 414 415 /* Force FS for fsl HS quirk */ 416 if (!ctrl->has_fsl_erratum_a005275) 417 endpt |= QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)); 418 else 419 endpt |= QH_ENDPT1_EPS(ehci_encode_speed(QH_FULL_SPEED)); 420 421 qh->qh_endpt1 = cpu_to_hc32(endpt); 422 endpt = QH_ENDPT2_MULT(1) | QH_ENDPT2_UFCMASK(0) | QH_ENDPT2_UFSMASK(0); 423 qh->qh_endpt2 = cpu_to_hc32(endpt); 424 ehci_update_endpt2_dev_n_port(dev, qh); 425 qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 426 qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 427 428 tdp = &qh->qh_overlay.qt_next; 429 if (req != NULL) { 430 /* 431 * Setup request qTD (3.5 in ehci-r10.pdf) 432 * 433 * qt_next ................ 03-00 H 434 * qt_altnext ............. 07-04 H 435 * qt_token ............... 0B-08 H 436 * 437 * [ buffer, buffer_hi ] loaded with "req". 438 */ 439 qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 440 qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 441 token = QT_TOKEN_DT(0) | QT_TOKEN_TOTALBYTES(sizeof(*req)) | 442 QT_TOKEN_IOC(0) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | 443 QT_TOKEN_PID(QT_TOKEN_PID_SETUP) | 444 QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); 445 qtd[qtd_counter].qt_token = cpu_to_hc32(token); 446 if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req))) { 447 printf("unable to construct SETUP TD\n"); 448 goto fail; 449 } 450 /* Update previous qTD! */ 451 *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); 452 tdp = &qtd[qtd_counter++].qt_next; 453 toggle = 1; 454 } 455 456 if (length > 0 || req == NULL) { 457 uint8_t *buf_ptr = buffer; 458 int left_length = length; 459 460 do { 461 /* 462 * Determine the size of this qTD transfer. By default, 463 * QT_BUFFER_CNT full pages can be used. 464 */ 465 int xfr_bytes = QT_BUFFER_CNT * EHCI_PAGE_SIZE; 466 /* 467 * However, if the input buffer is not page-aligned, the 468 * portion of the first page before the buffer start 469 * offset within that page is unusable. 470 */ 471 xfr_bytes -= (unsigned long)buf_ptr & (EHCI_PAGE_SIZE - 1); 472 /* 473 * In order to keep each packet within a qTD transfer, 474 * align the qTD transfer size to PKT_ALIGN. 475 */ 476 xfr_bytes &= ~(PKT_ALIGN - 1); 477 /* 478 * This transfer may be shorter than the available qTD 479 * transfer size that has just been computed. 480 */ 481 xfr_bytes = min(xfr_bytes, left_length); 482 483 /* 484 * Setup request qTD (3.5 in ehci-r10.pdf) 485 * 486 * qt_next ................ 03-00 H 487 * qt_altnext ............. 07-04 H 488 * qt_token ............... 0B-08 H 489 * 490 * [ buffer, buffer_hi ] loaded with "buffer". 491 */ 492 qtd[qtd_counter].qt_next = 493 cpu_to_hc32(QT_NEXT_TERMINATE); 494 qtd[qtd_counter].qt_altnext = 495 cpu_to_hc32(QT_NEXT_TERMINATE); 496 token = QT_TOKEN_DT(toggle) | 497 QT_TOKEN_TOTALBYTES(xfr_bytes) | 498 QT_TOKEN_IOC(req == NULL) | QT_TOKEN_CPAGE(0) | 499 QT_TOKEN_CERR(3) | 500 QT_TOKEN_PID(usb_pipein(pipe) ? 501 QT_TOKEN_PID_IN : QT_TOKEN_PID_OUT) | 502 QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); 503 qtd[qtd_counter].qt_token = cpu_to_hc32(token); 504 if (ehci_td_buffer(&qtd[qtd_counter], buf_ptr, 505 xfr_bytes)) { 506 printf("unable to construct DATA TD\n"); 507 goto fail; 508 } 509 /* Update previous qTD! */ 510 *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); 511 tdp = &qtd[qtd_counter++].qt_next; 512 /* 513 * Data toggle has to be adjusted since the qTD transfer 514 * size is not always an even multiple of 515 * wMaxPacketSize. 516 */ 517 if ((xfr_bytes / maxpacket) & 1) 518 toggle ^= 1; 519 buf_ptr += xfr_bytes; 520 left_length -= xfr_bytes; 521 } while (left_length > 0); 522 } 523 524 if (req != NULL) { 525 /* 526 * Setup request qTD (3.5 in ehci-r10.pdf) 527 * 528 * qt_next ................ 03-00 H 529 * qt_altnext ............. 07-04 H 530 * qt_token ............... 0B-08 H 531 */ 532 qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 533 qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 534 token = QT_TOKEN_DT(1) | QT_TOKEN_TOTALBYTES(0) | 535 QT_TOKEN_IOC(1) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | 536 QT_TOKEN_PID(usb_pipein(pipe) ? 537 QT_TOKEN_PID_OUT : QT_TOKEN_PID_IN) | 538 QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); 539 qtd[qtd_counter].qt_token = cpu_to_hc32(token); 540 /* Update previous qTD! */ 541 *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); 542 tdp = &qtd[qtd_counter++].qt_next; 543 } 544 545 ctrl->qh_list.qh_link = cpu_to_hc32(virt_to_phys(qh) | QH_LINK_TYPE_QH); 546 547 /* Flush dcache */ 548 flush_dcache_range((unsigned long)&ctrl->qh_list, 549 ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1)); 550 flush_dcache_range((unsigned long)qh, ALIGN_END_ADDR(struct QH, qh, 1)); 551 flush_dcache_range((unsigned long)qtd, 552 ALIGN_END_ADDR(struct qTD, qtd, qtd_count)); 553 554 /* Set async. queue head pointer. */ 555 ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(&ctrl->qh_list)); 556 557 usbsts = ehci_readl(&ctrl->hcor->or_usbsts); 558 ehci_writel(&ctrl->hcor->or_usbsts, (usbsts & 0x3f)); 559 560 /* Enable async. schedule. */ 561 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 562 cmd |= CMD_ASE; 563 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 564 565 ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, STS_ASS, 566 100 * 1000); 567 if (ret < 0) { 568 printf("EHCI fail timeout STS_ASS set\n"); 569 goto fail; 570 } 571 572 /* Wait for TDs to be processed. */ 573 ts = get_timer(0); 574 vtd = &qtd[qtd_counter - 1]; 575 timeout = USB_TIMEOUT_MS(pipe); 576 do { 577 /* Invalidate dcache */ 578 invalidate_dcache_range((unsigned long)&ctrl->qh_list, 579 ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1)); 580 invalidate_dcache_range((unsigned long)qh, 581 ALIGN_END_ADDR(struct QH, qh, 1)); 582 invalidate_dcache_range((unsigned long)qtd, 583 ALIGN_END_ADDR(struct qTD, qtd, qtd_count)); 584 585 token = hc32_to_cpu(vtd->qt_token); 586 if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) 587 break; 588 WATCHDOG_RESET(); 589 } while (get_timer(ts) < timeout); 590 591 /* 592 * Invalidate the memory area occupied by buffer 593 * Don't try to fix the buffer alignment, if it isn't properly 594 * aligned it's upper layer's fault so let invalidate_dcache_range() 595 * vow about it. But we have to fix the length as it's actual 596 * transfer length and can be unaligned. This is potentially 597 * dangerous operation, it's responsibility of the calling 598 * code to make sure enough space is reserved. 599 */ 600 if (buffer != NULL && length > 0) 601 invalidate_dcache_range((unsigned long)buffer, 602 ALIGN((unsigned long)buffer + length, ARCH_DMA_MINALIGN)); 603 604 /* Check that the TD processing happened */ 605 if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) 606 printf("EHCI timed out on TD - token=%#x\n", token); 607 608 /* Disable async schedule. */ 609 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 610 cmd &= ~CMD_ASE; 611 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 612 613 ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, 0, 614 100 * 1000); 615 if (ret < 0) { 616 printf("EHCI fail timeout STS_ASS reset\n"); 617 goto fail; 618 } 619 620 token = hc32_to_cpu(qh->qh_overlay.qt_token); 621 if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) { 622 debug("TOKEN=%#x\n", token); 623 switch (QT_TOKEN_GET_STATUS(token) & 624 ~(QT_TOKEN_STATUS_SPLITXSTATE | QT_TOKEN_STATUS_PERR)) { 625 case 0: 626 toggle = QT_TOKEN_GET_DT(token); 627 usb_settoggle(dev, usb_pipeendpoint(pipe), 628 usb_pipeout(pipe), toggle); 629 dev->status = 0; 630 break; 631 case QT_TOKEN_STATUS_HALTED: 632 dev->status = USB_ST_STALLED; 633 break; 634 case QT_TOKEN_STATUS_ACTIVE | QT_TOKEN_STATUS_DATBUFERR: 635 case QT_TOKEN_STATUS_DATBUFERR: 636 dev->status = USB_ST_BUF_ERR; 637 break; 638 case QT_TOKEN_STATUS_HALTED | QT_TOKEN_STATUS_BABBLEDET: 639 case QT_TOKEN_STATUS_BABBLEDET: 640 dev->status = USB_ST_BABBLE_DET; 641 break; 642 default: 643 dev->status = USB_ST_CRC_ERR; 644 if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_HALTED) 645 dev->status |= USB_ST_STALLED; 646 break; 647 } 648 dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token); 649 } else { 650 dev->act_len = 0; 651 #ifndef CONFIG_USB_EHCI_FARADAY 652 debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n", 653 dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts), 654 ehci_readl(&ctrl->hcor->or_portsc[0]), 655 ehci_readl(&ctrl->hcor->or_portsc[1])); 656 #endif 657 } 658 659 free(qtd); 660 return (dev->status != USB_ST_NOT_PROC) ? 0 : -1; 661 662 fail: 663 free(qtd); 664 return -1; 665 } 666 667 static int ehci_submit_root(struct usb_device *dev, unsigned long pipe, 668 void *buffer, int length, struct devrequest *req) 669 { 670 uint8_t tmpbuf[4]; 671 u16 typeReq; 672 void *srcptr = NULL; 673 int len, srclen; 674 uint32_t reg; 675 uint32_t *status_reg; 676 int port = le16_to_cpu(req->index) & 0xff; 677 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 678 679 srclen = 0; 680 681 debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n", 682 req->request, req->request, 683 req->requesttype, req->requesttype, 684 le16_to_cpu(req->value), le16_to_cpu(req->index)); 685 686 typeReq = req->request | req->requesttype << 8; 687 688 switch (typeReq) { 689 case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8): 690 case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 691 case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 692 status_reg = ctrl->ops.get_portsc_register(ctrl, port - 1); 693 if (!status_reg) 694 return -1; 695 break; 696 default: 697 status_reg = NULL; 698 break; 699 } 700 701 switch (typeReq) { 702 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 703 switch (le16_to_cpu(req->value) >> 8) { 704 case USB_DT_DEVICE: 705 debug("USB_DT_DEVICE request\n"); 706 srcptr = &descriptor.device; 707 srclen = descriptor.device.bLength; 708 break; 709 case USB_DT_CONFIG: 710 debug("USB_DT_CONFIG config\n"); 711 srcptr = &descriptor.config; 712 srclen = descriptor.config.bLength + 713 descriptor.interface.bLength + 714 descriptor.endpoint.bLength; 715 break; 716 case USB_DT_STRING: 717 debug("USB_DT_STRING config\n"); 718 switch (le16_to_cpu(req->value) & 0xff) { 719 case 0: /* Language */ 720 srcptr = "\4\3\1\0"; 721 srclen = 4; 722 break; 723 case 1: /* Vendor */ 724 srcptr = "\16\3u\0-\0b\0o\0o\0t\0"; 725 srclen = 14; 726 break; 727 case 2: /* Product */ 728 srcptr = "\52\3E\0H\0C\0I\0 " 729 "\0H\0o\0s\0t\0 " 730 "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0"; 731 srclen = 42; 732 break; 733 default: 734 debug("unknown value DT_STRING %x\n", 735 le16_to_cpu(req->value)); 736 goto unknown; 737 } 738 break; 739 default: 740 debug("unknown value %x\n", le16_to_cpu(req->value)); 741 goto unknown; 742 } 743 break; 744 case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8): 745 switch (le16_to_cpu(req->value) >> 8) { 746 case USB_DT_HUB: 747 debug("USB_DT_HUB config\n"); 748 srcptr = &descriptor.hub; 749 srclen = descriptor.hub.bLength; 750 break; 751 default: 752 debug("unknown value %x\n", le16_to_cpu(req->value)); 753 goto unknown; 754 } 755 break; 756 case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8): 757 debug("USB_REQ_SET_ADDRESS\n"); 758 ctrl->rootdev = le16_to_cpu(req->value); 759 break; 760 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 761 debug("USB_REQ_SET_CONFIGURATION\n"); 762 /* Nothing to do */ 763 break; 764 case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8): 765 tmpbuf[0] = 1; /* USB_STATUS_SELFPOWERED */ 766 tmpbuf[1] = 0; 767 srcptr = tmpbuf; 768 srclen = 2; 769 break; 770 case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8): 771 memset(tmpbuf, 0, 4); 772 reg = ehci_readl(status_reg); 773 if (reg & EHCI_PS_CS) 774 tmpbuf[0] |= USB_PORT_STAT_CONNECTION; 775 if (reg & EHCI_PS_PE) 776 tmpbuf[0] |= USB_PORT_STAT_ENABLE; 777 if (reg & EHCI_PS_SUSP) 778 tmpbuf[0] |= USB_PORT_STAT_SUSPEND; 779 if (reg & EHCI_PS_OCA) 780 tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT; 781 if (reg & EHCI_PS_PR) 782 tmpbuf[0] |= USB_PORT_STAT_RESET; 783 if (reg & EHCI_PS_PP) 784 tmpbuf[1] |= USB_PORT_STAT_POWER >> 8; 785 786 if (ehci_is_TDI()) { 787 switch (ctrl->ops.get_port_speed(ctrl, reg)) { 788 case PORTSC_PSPD_FS: 789 break; 790 case PORTSC_PSPD_LS: 791 tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8; 792 break; 793 case PORTSC_PSPD_HS: 794 default: 795 tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; 796 break; 797 } 798 } else { 799 tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; 800 } 801 802 if (reg & EHCI_PS_CSC) 803 tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION; 804 if (reg & EHCI_PS_PEC) 805 tmpbuf[2] |= USB_PORT_STAT_C_ENABLE; 806 if (reg & EHCI_PS_OCC) 807 tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT; 808 if (ctrl->portreset & (1 << port)) 809 tmpbuf[2] |= USB_PORT_STAT_C_RESET; 810 811 srcptr = tmpbuf; 812 srclen = 4; 813 break; 814 case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 815 reg = ehci_readl(status_reg); 816 reg &= ~EHCI_PS_CLEAR; 817 switch (le16_to_cpu(req->value)) { 818 case USB_PORT_FEAT_ENABLE: 819 reg |= EHCI_PS_PE; 820 ehci_writel(status_reg, reg); 821 break; 822 case USB_PORT_FEAT_POWER: 823 if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams))) { 824 reg |= EHCI_PS_PP; 825 ehci_writel(status_reg, reg); 826 } 827 break; 828 case USB_PORT_FEAT_RESET: 829 if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) == EHCI_PS_CS && 830 !ehci_is_TDI() && 831 EHCI_PS_IS_LOWSPEED(reg)) { 832 /* Low speed device, give up ownership. */ 833 debug("port %d low speed --> companion\n", 834 port - 1); 835 reg |= EHCI_PS_PO; 836 ehci_writel(status_reg, reg); 837 return -ENXIO; 838 } else { 839 int ret; 840 841 /* Disable chirp for HS erratum */ 842 if (ctrl->has_fsl_erratum_a005275) 843 reg |= PORTSC_FSL_PFSC; 844 845 reg |= EHCI_PS_PR; 846 reg &= ~EHCI_PS_PE; 847 ehci_writel(status_reg, reg); 848 /* 849 * caller must wait, then call GetPortStatus 850 * usb 2.0 specification say 50 ms resets on 851 * root 852 */ 853 ctrl->ops.powerup_fixup(ctrl, status_reg, ®); 854 855 ehci_writel(status_reg, reg & ~EHCI_PS_PR); 856 /* 857 * A host controller must terminate the reset 858 * and stabilize the state of the port within 859 * 2 milliseconds 860 */ 861 ret = handshake(status_reg, EHCI_PS_PR, 0, 862 2 * 1000); 863 if (!ret) { 864 reg = ehci_readl(status_reg); 865 if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) 866 == EHCI_PS_CS && !ehci_is_TDI()) { 867 debug("port %d full speed --> companion\n", port - 1); 868 reg &= ~EHCI_PS_CLEAR; 869 reg |= EHCI_PS_PO; 870 ehci_writel(status_reg, reg); 871 return -ENXIO; 872 } else { 873 ctrl->portreset |= 1 << port; 874 } 875 } else { 876 printf("port(%d) reset error\n", 877 port - 1); 878 } 879 } 880 break; 881 case USB_PORT_FEAT_TEST: 882 ehci_shutdown(ctrl); 883 reg &= ~(0xf << 16); 884 reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16; 885 ehci_writel(status_reg, reg); 886 break; 887 default: 888 debug("unknown feature %x\n", le16_to_cpu(req->value)); 889 goto unknown; 890 } 891 /* unblock posted writes */ 892 (void) ehci_readl(&ctrl->hcor->or_usbcmd); 893 break; 894 case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): 895 reg = ehci_readl(status_reg); 896 reg &= ~EHCI_PS_CLEAR; 897 switch (le16_to_cpu(req->value)) { 898 case USB_PORT_FEAT_ENABLE: 899 reg &= ~EHCI_PS_PE; 900 break; 901 case USB_PORT_FEAT_C_ENABLE: 902 reg |= EHCI_PS_PE; 903 break; 904 case USB_PORT_FEAT_POWER: 905 if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams))) 906 reg &= ~EHCI_PS_PP; 907 break; 908 case USB_PORT_FEAT_C_CONNECTION: 909 reg |= EHCI_PS_CSC; 910 break; 911 case USB_PORT_FEAT_OVER_CURRENT: 912 reg |= EHCI_PS_OCC; 913 break; 914 case USB_PORT_FEAT_C_RESET: 915 ctrl->portreset &= ~(1 << port); 916 break; 917 default: 918 debug("unknown feature %x\n", le16_to_cpu(req->value)); 919 goto unknown; 920 } 921 ehci_writel(status_reg, reg); 922 /* unblock posted write */ 923 (void) ehci_readl(&ctrl->hcor->or_usbcmd); 924 break; 925 default: 926 debug("Unknown request\n"); 927 goto unknown; 928 } 929 930 mdelay(1); 931 len = min3(srclen, (int)le16_to_cpu(req->length), length); 932 if (srcptr != NULL && len > 0) 933 memcpy(buffer, srcptr, len); 934 else 935 debug("Len is 0\n"); 936 937 dev->act_len = len; 938 dev->status = 0; 939 return 0; 940 941 unknown: 942 debug("requesttype=%x, request=%x, value=%x, index=%x, length=%x\n", 943 req->requesttype, req->request, le16_to_cpu(req->value), 944 le16_to_cpu(req->index), le16_to_cpu(req->length)); 945 946 dev->act_len = 0; 947 dev->status = USB_ST_STALLED; 948 return -1; 949 } 950 951 static const struct ehci_ops default_ehci_ops = { 952 .set_usb_mode = ehci_set_usbmode, 953 .get_port_speed = ehci_get_port_speed, 954 .powerup_fixup = ehci_powerup_fixup, 955 .get_portsc_register = ehci_get_portsc_register, 956 }; 957 958 static void ehci_setup_ops(struct ehci_ctrl *ctrl, const struct ehci_ops *ops) 959 { 960 if (!ops) { 961 ctrl->ops = default_ehci_ops; 962 } else { 963 ctrl->ops = *ops; 964 if (!ctrl->ops.set_usb_mode) 965 ctrl->ops.set_usb_mode = ehci_set_usbmode; 966 if (!ctrl->ops.get_port_speed) 967 ctrl->ops.get_port_speed = ehci_get_port_speed; 968 if (!ctrl->ops.powerup_fixup) 969 ctrl->ops.powerup_fixup = ehci_powerup_fixup; 970 if (!ctrl->ops.get_portsc_register) 971 ctrl->ops.get_portsc_register = 972 ehci_get_portsc_register; 973 } 974 } 975 976 #ifndef CONFIG_DM_USB 977 void ehci_set_controller_priv(int index, void *priv, const struct ehci_ops *ops) 978 { 979 struct ehci_ctrl *ctrl = &ehcic[index]; 980 981 ctrl->priv = priv; 982 ehci_setup_ops(ctrl, ops); 983 } 984 985 void *ehci_get_controller_priv(int index) 986 { 987 return ehcic[index].priv; 988 } 989 #endif 990 991 static int ehci_common_init(struct ehci_ctrl *ctrl, uint tweaks) 992 { 993 struct QH *qh_list; 994 struct QH *periodic; 995 uint32_t reg; 996 uint32_t cmd; 997 int i; 998 999 /* Set the high address word (aka segment) for 64-bit controller */ 1000 if (ehci_readl(&ctrl->hccr->cr_hccparams) & 1) 1001 ehci_writel(&ctrl->hcor->or_ctrldssegment, 0); 1002 1003 qh_list = &ctrl->qh_list; 1004 1005 /* Set head of reclaim list */ 1006 memset(qh_list, 0, sizeof(*qh_list)); 1007 qh_list->qh_link = cpu_to_hc32(virt_to_phys(qh_list) | QH_LINK_TYPE_QH); 1008 qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) | 1009 QH_ENDPT1_EPS(USB_SPEED_HIGH)); 1010 qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 1011 qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1012 qh_list->qh_overlay.qt_token = 1013 cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED)); 1014 1015 flush_dcache_range((unsigned long)qh_list, 1016 ALIGN_END_ADDR(struct QH, qh_list, 1)); 1017 1018 /* Set async. queue head pointer. */ 1019 ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(qh_list)); 1020 1021 /* 1022 * Set up periodic list 1023 * Step 1: Parent QH for all periodic transfers. 1024 */ 1025 ctrl->periodic_schedules = 0; 1026 periodic = &ctrl->periodic_queue; 1027 memset(periodic, 0, sizeof(*periodic)); 1028 periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE); 1029 periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 1030 periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1031 1032 flush_dcache_range((unsigned long)periodic, 1033 ALIGN_END_ADDR(struct QH, periodic, 1)); 1034 1035 /* 1036 * Step 2: Setup frame-list: Every microframe, USB tries the same list. 1037 * In particular, device specifications on polling frequency 1038 * are disregarded. Keyboards seem to send NAK/NYet reliably 1039 * when polled with an empty buffer. 1040 * 1041 * Split Transactions will be spread across microframes using 1042 * S-mask and C-mask. 1043 */ 1044 if (ctrl->periodic_list == NULL) 1045 ctrl->periodic_list = memalign(4096, 1024 * 4); 1046 1047 if (!ctrl->periodic_list) 1048 return -ENOMEM; 1049 for (i = 0; i < 1024; i++) { 1050 ctrl->periodic_list[i] = cpu_to_hc32((unsigned long)periodic 1051 | QH_LINK_TYPE_QH); 1052 } 1053 1054 flush_dcache_range((unsigned long)ctrl->periodic_list, 1055 ALIGN_END_ADDR(uint32_t, ctrl->periodic_list, 1056 1024)); 1057 1058 /* Set periodic list base address */ 1059 ehci_writel(&ctrl->hcor->or_periodiclistbase, 1060 (unsigned long)ctrl->periodic_list); 1061 1062 reg = ehci_readl(&ctrl->hccr->cr_hcsparams); 1063 descriptor.hub.bNbrPorts = HCS_N_PORTS(reg); 1064 debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts); 1065 /* Port Indicators */ 1066 if (HCS_INDICATOR(reg)) 1067 put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics) 1068 | 0x80, &descriptor.hub.wHubCharacteristics); 1069 /* Port Power Control */ 1070 if (HCS_PPC(reg)) 1071 put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics) 1072 | 0x01, &descriptor.hub.wHubCharacteristics); 1073 1074 /* Start the host controller. */ 1075 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 1076 /* 1077 * Philips, Intel, and maybe others need CMD_RUN before the 1078 * root hub will detect new devices (why?); NEC doesn't 1079 */ 1080 cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); 1081 cmd |= CMD_RUN; 1082 ehci_writel(&ctrl->hcor->or_usbcmd, cmd); 1083 1084 if (!(tweaks & EHCI_TWEAK_NO_INIT_CF)) { 1085 /* take control over the ports */ 1086 cmd = ehci_readl(&ctrl->hcor->or_configflag); 1087 cmd |= FLAG_CF; 1088 ehci_writel(&ctrl->hcor->or_configflag, cmd); 1089 } 1090 1091 /* unblock posted write */ 1092 cmd = ehci_readl(&ctrl->hcor->or_usbcmd); 1093 mdelay(5); 1094 reg = HC_VERSION(ehci_readl(&ctrl->hccr->cr_capbase)); 1095 printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff); 1096 1097 return 0; 1098 } 1099 1100 #ifndef CONFIG_DM_USB 1101 int usb_lowlevel_stop(int index) 1102 { 1103 ehci_shutdown(&ehcic[index]); 1104 return ehci_hcd_stop(index); 1105 } 1106 1107 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) 1108 { 1109 struct ehci_ctrl *ctrl = &ehcic[index]; 1110 uint tweaks = 0; 1111 int rc; 1112 1113 /** 1114 * Set ops to default_ehci_ops, ehci_hcd_init should call 1115 * ehci_set_controller_priv to change any of these function pointers. 1116 */ 1117 ctrl->ops = default_ehci_ops; 1118 1119 rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor); 1120 if (rc) 1121 return rc; 1122 if (!ctrl->hccr || !ctrl->hcor) 1123 return -1; 1124 if (init == USB_INIT_DEVICE) 1125 goto done; 1126 1127 /* EHCI spec section 4.1 */ 1128 if (ehci_reset(ctrl)) 1129 return -1; 1130 1131 #if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET) 1132 rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor); 1133 if (rc) 1134 return rc; 1135 #endif 1136 #ifdef CONFIG_USB_EHCI_FARADAY 1137 tweaks |= EHCI_TWEAK_NO_INIT_CF; 1138 #endif 1139 rc = ehci_common_init(ctrl, tweaks); 1140 if (rc) 1141 return rc; 1142 1143 ctrl->rootdev = 0; 1144 done: 1145 *controller = &ehcic[index]; 1146 return 0; 1147 } 1148 #endif 1149 1150 static int _ehci_submit_bulk_msg(struct usb_device *dev, unsigned long pipe, 1151 void *buffer, int length) 1152 { 1153 1154 if (usb_pipetype(pipe) != PIPE_BULK) { 1155 debug("non-bulk pipe (type=%lu)", usb_pipetype(pipe)); 1156 return -1; 1157 } 1158 return ehci_submit_async(dev, pipe, buffer, length, NULL); 1159 } 1160 1161 static int _ehci_submit_control_msg(struct usb_device *dev, unsigned long pipe, 1162 void *buffer, int length, 1163 struct devrequest *setup) 1164 { 1165 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 1166 1167 if (usb_pipetype(pipe) != PIPE_CONTROL) { 1168 debug("non-control pipe (type=%lu)", usb_pipetype(pipe)); 1169 return -1; 1170 } 1171 1172 if (usb_pipedevice(pipe) == ctrl->rootdev) { 1173 if (!ctrl->rootdev) 1174 dev->speed = USB_SPEED_HIGH; 1175 return ehci_submit_root(dev, pipe, buffer, length, setup); 1176 } 1177 return ehci_submit_async(dev, pipe, buffer, length, setup); 1178 } 1179 1180 struct int_queue { 1181 int elementsize; 1182 unsigned long pipe; 1183 struct QH *first; 1184 struct QH *current; 1185 struct QH *last; 1186 struct qTD *tds; 1187 }; 1188 1189 #define NEXT_QH(qh) (struct QH *)((unsigned long)hc32_to_cpu((qh)->qh_link) & ~0x1f) 1190 1191 static int 1192 enable_periodic(struct ehci_ctrl *ctrl) 1193 { 1194 uint32_t cmd; 1195 struct ehci_hcor *hcor = ctrl->hcor; 1196 int ret; 1197 1198 cmd = ehci_readl(&hcor->or_usbcmd); 1199 cmd |= CMD_PSE; 1200 ehci_writel(&hcor->or_usbcmd, cmd); 1201 1202 ret = handshake((uint32_t *)&hcor->or_usbsts, 1203 STS_PSS, STS_PSS, 100 * 1000); 1204 if (ret < 0) { 1205 printf("EHCI failed: timeout when enabling periodic list\n"); 1206 return -ETIMEDOUT; 1207 } 1208 udelay(1000); 1209 return 0; 1210 } 1211 1212 static int 1213 disable_periodic(struct ehci_ctrl *ctrl) 1214 { 1215 uint32_t cmd; 1216 struct ehci_hcor *hcor = ctrl->hcor; 1217 int ret; 1218 1219 cmd = ehci_readl(&hcor->or_usbcmd); 1220 cmd &= ~CMD_PSE; 1221 ehci_writel(&hcor->or_usbcmd, cmd); 1222 1223 ret = handshake((uint32_t *)&hcor->or_usbsts, 1224 STS_PSS, 0, 100 * 1000); 1225 if (ret < 0) { 1226 printf("EHCI failed: timeout when disabling periodic list\n"); 1227 return -ETIMEDOUT; 1228 } 1229 return 0; 1230 } 1231 1232 static struct int_queue *_ehci_create_int_queue(struct usb_device *dev, 1233 unsigned long pipe, int queuesize, int elementsize, 1234 void *buffer, int interval) 1235 { 1236 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 1237 struct int_queue *result = NULL; 1238 uint32_t i, toggle; 1239 1240 /* 1241 * Interrupt transfers requiring several transactions are not supported 1242 * because bInterval is ignored. 1243 * 1244 * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2 1245 * <= PKT_ALIGN if several qTDs are required, while the USB 1246 * specification does not constrain this for interrupt transfers. That 1247 * means that ehci_submit_async() would support interrupt transfers 1248 * requiring several transactions only as long as the transfer size does 1249 * not require more than a single qTD. 1250 */ 1251 if (elementsize > usb_maxpacket(dev, pipe)) { 1252 printf("%s: xfers requiring several transactions are not supported.\n", 1253 __func__); 1254 return NULL; 1255 } 1256 1257 debug("Enter create_int_queue\n"); 1258 if (usb_pipetype(pipe) != PIPE_INTERRUPT) { 1259 debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe)); 1260 return NULL; 1261 } 1262 1263 /* limit to 4 full pages worth of data - 1264 * we can safely fit them in a single TD, 1265 * no matter the alignment 1266 */ 1267 if (elementsize >= 16384) { 1268 debug("too large elements for interrupt transfers\n"); 1269 return NULL; 1270 } 1271 1272 result = malloc(sizeof(*result)); 1273 if (!result) { 1274 debug("ehci intr queue: out of memory\n"); 1275 goto fail1; 1276 } 1277 result->elementsize = elementsize; 1278 result->pipe = pipe; 1279 result->first = memalign(USB_DMA_MINALIGN, 1280 sizeof(struct QH) * queuesize); 1281 if (!result->first) { 1282 debug("ehci intr queue: out of memory\n"); 1283 goto fail2; 1284 } 1285 result->current = result->first; 1286 result->last = result->first + queuesize - 1; 1287 result->tds = memalign(USB_DMA_MINALIGN, 1288 sizeof(struct qTD) * queuesize); 1289 if (!result->tds) { 1290 debug("ehci intr queue: out of memory\n"); 1291 goto fail3; 1292 } 1293 memset(result->first, 0, sizeof(struct QH) * queuesize); 1294 memset(result->tds, 0, sizeof(struct qTD) * queuesize); 1295 1296 toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); 1297 1298 for (i = 0; i < queuesize; i++) { 1299 struct QH *qh = result->first + i; 1300 struct qTD *td = result->tds + i; 1301 void **buf = &qh->buffer; 1302 1303 qh->qh_link = cpu_to_hc32((unsigned long)(qh+1) | QH_LINK_TYPE_QH); 1304 if (i == queuesize - 1) 1305 qh->qh_link = cpu_to_hc32(QH_LINK_TERMINATE); 1306 1307 qh->qh_overlay.qt_next = cpu_to_hc32((unsigned long)td); 1308 qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1309 qh->qh_endpt1 = 1310 cpu_to_hc32((0 << 28) | /* No NAK reload (ehci 4.9) */ 1311 (usb_maxpacket(dev, pipe) << 16) | /* MPS */ 1312 (1 << 14) | 1313 QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) | 1314 (usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */ 1315 (usb_pipedevice(pipe) << 0)); 1316 qh->qh_endpt2 = cpu_to_hc32((1 << 30) | /* 1 Tx per mframe */ 1317 (1 << 0)); /* S-mask: microframe 0 */ 1318 if (dev->speed == USB_SPEED_LOW || 1319 dev->speed == USB_SPEED_FULL) { 1320 /* C-mask: microframes 2-4 */ 1321 qh->qh_endpt2 |= cpu_to_hc32((0x1c << 8)); 1322 } 1323 ehci_update_endpt2_dev_n_port(dev, qh); 1324 1325 td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); 1326 td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); 1327 debug("communication direction is '%s'\n", 1328 usb_pipein(pipe) ? "in" : "out"); 1329 td->qt_token = cpu_to_hc32( 1330 QT_TOKEN_DT(toggle) | 1331 (elementsize << 16) | 1332 ((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */ 1333 0x80); /* active */ 1334 td->qt_buffer[0] = 1335 cpu_to_hc32((unsigned long)buffer + i * elementsize); 1336 td->qt_buffer[1] = 1337 cpu_to_hc32((td->qt_buffer[0] + 0x1000) & ~0xfff); 1338 td->qt_buffer[2] = 1339 cpu_to_hc32((td->qt_buffer[0] + 0x2000) & ~0xfff); 1340 td->qt_buffer[3] = 1341 cpu_to_hc32((td->qt_buffer[0] + 0x3000) & ~0xfff); 1342 td->qt_buffer[4] = 1343 cpu_to_hc32((td->qt_buffer[0] + 0x4000) & ~0xfff); 1344 1345 *buf = buffer + i * elementsize; 1346 toggle ^= 1; 1347 } 1348 1349 flush_dcache_range((unsigned long)buffer, 1350 ALIGN_END_ADDR(char, buffer, 1351 queuesize * elementsize)); 1352 flush_dcache_range((unsigned long)result->first, 1353 ALIGN_END_ADDR(struct QH, result->first, 1354 queuesize)); 1355 flush_dcache_range((unsigned long)result->tds, 1356 ALIGN_END_ADDR(struct qTD, result->tds, 1357 queuesize)); 1358 1359 if (ctrl->periodic_schedules > 0) { 1360 if (disable_periodic(ctrl) < 0) { 1361 debug("FATAL: periodic should never fail, but did"); 1362 goto fail3; 1363 } 1364 } 1365 1366 /* hook up to periodic list */ 1367 struct QH *list = &ctrl->periodic_queue; 1368 result->last->qh_link = list->qh_link; 1369 list->qh_link = cpu_to_hc32((unsigned long)result->first | QH_LINK_TYPE_QH); 1370 1371 flush_dcache_range((unsigned long)result->last, 1372 ALIGN_END_ADDR(struct QH, result->last, 1)); 1373 flush_dcache_range((unsigned long)list, 1374 ALIGN_END_ADDR(struct QH, list, 1)); 1375 1376 if (enable_periodic(ctrl) < 0) { 1377 debug("FATAL: periodic should never fail, but did"); 1378 goto fail3; 1379 } 1380 ctrl->periodic_schedules++; 1381 1382 debug("Exit create_int_queue\n"); 1383 return result; 1384 fail3: 1385 if (result->tds) 1386 free(result->tds); 1387 fail2: 1388 if (result->first) 1389 free(result->first); 1390 if (result) 1391 free(result); 1392 fail1: 1393 return NULL; 1394 } 1395 1396 static void *_ehci_poll_int_queue(struct usb_device *dev, 1397 struct int_queue *queue) 1398 { 1399 struct QH *cur = queue->current; 1400 struct qTD *cur_td; 1401 uint32_t token, toggle; 1402 unsigned long pipe = queue->pipe; 1403 1404 /* depleted queue */ 1405 if (cur == NULL) { 1406 debug("Exit poll_int_queue with completed queue\n"); 1407 return NULL; 1408 } 1409 /* still active */ 1410 cur_td = &queue->tds[queue->current - queue->first]; 1411 invalidate_dcache_range((unsigned long)cur_td, 1412 ALIGN_END_ADDR(struct qTD, cur_td, 1)); 1413 token = hc32_to_cpu(cur_td->qt_token); 1414 if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) { 1415 debug("Exit poll_int_queue with no completed intr transfer. token is %x\n", token); 1416 return NULL; 1417 } 1418 1419 toggle = QT_TOKEN_GET_DT(token); 1420 usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle); 1421 1422 if (!(cur->qh_link & QH_LINK_TERMINATE)) 1423 queue->current++; 1424 else 1425 queue->current = NULL; 1426 1427 invalidate_dcache_range((unsigned long)cur->buffer, 1428 ALIGN_END_ADDR(char, cur->buffer, 1429 queue->elementsize)); 1430 1431 debug("Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n", 1432 token, cur, queue->first); 1433 return cur->buffer; 1434 } 1435 1436 /* Do not free buffers associated with QHs, they're owned by someone else */ 1437 static int _ehci_destroy_int_queue(struct usb_device *dev, 1438 struct int_queue *queue) 1439 { 1440 struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); 1441 int result = -1; 1442 unsigned long timeout; 1443 1444 if (disable_periodic(ctrl) < 0) { 1445 debug("FATAL: periodic should never fail, but did"); 1446 goto out; 1447 } 1448 ctrl->periodic_schedules--; 1449 1450 struct QH *cur = &ctrl->periodic_queue; 1451 timeout = get_timer(0) + 500; /* abort after 500ms */ 1452 while (!(cur->qh_link & cpu_to_hc32(QH_LINK_TERMINATE))) { 1453 debug("considering %p, with qh_link %x\n", cur, cur->qh_link); 1454 if (NEXT_QH(cur) == queue->first) { 1455 debug("found candidate. removing from chain\n"); 1456 cur->qh_link = queue->last->qh_link; 1457 flush_dcache_range((unsigned long)cur, 1458 ALIGN_END_ADDR(struct QH, cur, 1)); 1459 result = 0; 1460 break; 1461 } 1462 cur = NEXT_QH(cur); 1463 if (get_timer(0) > timeout) { 1464 printf("Timeout destroying interrupt endpoint queue\n"); 1465 result = -1; 1466 goto out; 1467 } 1468 } 1469 1470 if (ctrl->periodic_schedules > 0) { 1471 result = enable_periodic(ctrl); 1472 if (result < 0) 1473 debug("FATAL: periodic should never fail, but did"); 1474 } 1475 1476 out: 1477 free(queue->tds); 1478 free(queue->first); 1479 free(queue); 1480 1481 return result; 1482 } 1483 1484 static int _ehci_submit_int_msg(struct usb_device *dev, unsigned long pipe, 1485 void *buffer, int length, int interval) 1486 { 1487 void *backbuffer; 1488 struct int_queue *queue; 1489 unsigned long timeout; 1490 int result = 0, ret; 1491 1492 debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d", 1493 dev, pipe, buffer, length, interval); 1494 1495 queue = _ehci_create_int_queue(dev, pipe, 1, length, buffer, interval); 1496 if (!queue) 1497 return -1; 1498 1499 timeout = get_timer(0) + USB_TIMEOUT_MS(pipe); 1500 while ((backbuffer = _ehci_poll_int_queue(dev, queue)) == NULL) 1501 if (get_timer(0) > timeout) { 1502 printf("Timeout poll on interrupt endpoint\n"); 1503 result = -ETIMEDOUT; 1504 break; 1505 } 1506 1507 if (backbuffer != buffer) { 1508 debug("got wrong buffer back (%p instead of %p)\n", 1509 backbuffer, buffer); 1510 return -EINVAL; 1511 } 1512 1513 ret = _ehci_destroy_int_queue(dev, queue); 1514 if (ret < 0) 1515 return ret; 1516 1517 /* everything worked out fine */ 1518 return result; 1519 } 1520 1521 #ifndef CONFIG_DM_USB 1522 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, 1523 void *buffer, int length) 1524 { 1525 return _ehci_submit_bulk_msg(dev, pipe, buffer, length); 1526 } 1527 1528 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1529 int length, struct devrequest *setup) 1530 { 1531 return _ehci_submit_control_msg(dev, pipe, buffer, length, setup); 1532 } 1533 1534 int submit_int_msg(struct usb_device *dev, unsigned long pipe, 1535 void *buffer, int length, int interval) 1536 { 1537 return _ehci_submit_int_msg(dev, pipe, buffer, length, interval); 1538 } 1539 1540 struct int_queue *create_int_queue(struct usb_device *dev, 1541 unsigned long pipe, int queuesize, int elementsize, 1542 void *buffer, int interval) 1543 { 1544 return _ehci_create_int_queue(dev, pipe, queuesize, elementsize, 1545 buffer, interval); 1546 } 1547 1548 void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) 1549 { 1550 return _ehci_poll_int_queue(dev, queue); 1551 } 1552 1553 int destroy_int_queue(struct usb_device *dev, struct int_queue *queue) 1554 { 1555 return _ehci_destroy_int_queue(dev, queue); 1556 } 1557 #endif 1558 1559 #ifdef CONFIG_DM_USB 1560 static int ehci_submit_control_msg(struct udevice *dev, struct usb_device *udev, 1561 unsigned long pipe, void *buffer, int length, 1562 struct devrequest *setup) 1563 { 1564 debug("%s: dev='%s', udev=%p, udev->dev='%s', portnr=%d\n", __func__, 1565 dev->name, udev, udev->dev->name, udev->portnr); 1566 1567 return _ehci_submit_control_msg(udev, pipe, buffer, length, setup); 1568 } 1569 1570 static int ehci_submit_bulk_msg(struct udevice *dev, struct usb_device *udev, 1571 unsigned long pipe, void *buffer, int length) 1572 { 1573 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1574 return _ehci_submit_bulk_msg(udev, pipe, buffer, length); 1575 } 1576 1577 static int ehci_submit_int_msg(struct udevice *dev, struct usb_device *udev, 1578 unsigned long pipe, void *buffer, int length, 1579 int interval) 1580 { 1581 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1582 return _ehci_submit_int_msg(udev, pipe, buffer, length, interval); 1583 } 1584 1585 static struct int_queue *ehci_create_int_queue(struct udevice *dev, 1586 struct usb_device *udev, unsigned long pipe, int queuesize, 1587 int elementsize, void *buffer, int interval) 1588 { 1589 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1590 return _ehci_create_int_queue(udev, pipe, queuesize, elementsize, 1591 buffer, interval); 1592 } 1593 1594 static void *ehci_poll_int_queue(struct udevice *dev, struct usb_device *udev, 1595 struct int_queue *queue) 1596 { 1597 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1598 return _ehci_poll_int_queue(udev, queue); 1599 } 1600 1601 static int ehci_destroy_int_queue(struct udevice *dev, struct usb_device *udev, 1602 struct int_queue *queue) 1603 { 1604 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1605 return _ehci_destroy_int_queue(udev, queue); 1606 } 1607 1608 static int ehci_get_max_xfer_size(struct udevice *dev, size_t *size) 1609 { 1610 /* 1611 * EHCD can handle any transfer length as long as there is enough 1612 * free heap space left, hence set the theoretical max number here. 1613 */ 1614 *size = SIZE_MAX; 1615 1616 return 0; 1617 } 1618 1619 int ehci_register(struct udevice *dev, struct ehci_hccr *hccr, 1620 struct ehci_hcor *hcor, const struct ehci_ops *ops, 1621 uint tweaks, enum usb_init_type init) 1622 { 1623 struct usb_bus_priv *priv = dev_get_uclass_priv(dev); 1624 struct ehci_ctrl *ctrl = dev_get_priv(dev); 1625 int ret = -1; 1626 1627 debug("%s: dev='%s', ctrl=%p, hccr=%p, hcor=%p, init=%d\n", __func__, 1628 dev->name, ctrl, hccr, hcor, init); 1629 1630 if (!ctrl || !hccr || !hcor) 1631 goto err; 1632 1633 priv->desc_before_addr = true; 1634 1635 ehci_setup_ops(ctrl, ops); 1636 ctrl->hccr = hccr; 1637 ctrl->hcor = hcor; 1638 ctrl->priv = ctrl; 1639 1640 ctrl->init = init; 1641 if (ctrl->init == USB_INIT_DEVICE) 1642 goto done; 1643 1644 ret = ehci_reset(ctrl); 1645 if (ret) 1646 goto err; 1647 1648 if (ctrl->ops.init_after_reset) { 1649 ret = ctrl->ops.init_after_reset(ctrl); 1650 if (ret) 1651 goto err; 1652 } 1653 1654 ret = ehci_common_init(ctrl, tweaks); 1655 if (ret) 1656 goto err; 1657 done: 1658 return 0; 1659 err: 1660 free(ctrl); 1661 debug("%s: failed, ret=%d\n", __func__, ret); 1662 return ret; 1663 } 1664 1665 int ehci_deregister(struct udevice *dev) 1666 { 1667 struct ehci_ctrl *ctrl = dev_get_priv(dev); 1668 1669 if (ctrl->init == USB_INIT_DEVICE) 1670 return 0; 1671 1672 ehci_shutdown(ctrl); 1673 1674 return 0; 1675 } 1676 1677 struct dm_usb_ops ehci_usb_ops = { 1678 .control = ehci_submit_control_msg, 1679 .bulk = ehci_submit_bulk_msg, 1680 .interrupt = ehci_submit_int_msg, 1681 .create_int_queue = ehci_create_int_queue, 1682 .poll_int_queue = ehci_poll_int_queue, 1683 .destroy_int_queue = ehci_destroy_int_queue, 1684 .get_max_xfer_size = ehci_get_max_xfer_size, 1685 }; 1686 1687 #endif 1688 1689 #ifdef CONFIG_PHY 1690 int ehci_setup_phy(struct udevice *dev, struct phy *phy, int index) 1691 { 1692 int ret; 1693 1694 if (!phy) 1695 return 0; 1696 1697 ret = generic_phy_get_by_index(dev, index, phy); 1698 if (ret) { 1699 if (ret != -ENOENT) { 1700 dev_err(dev, "failed to get usb phy\n"); 1701 return ret; 1702 } 1703 } else { 1704 ret = generic_phy_init(phy); 1705 if (ret) { 1706 dev_err(dev, "failed to init usb phy\n"); 1707 return ret; 1708 } 1709 1710 ret = generic_phy_power_on(phy); 1711 if (ret) { 1712 dev_err(dev, "failed to power on usb phy\n"); 1713 return generic_phy_exit(phy); 1714 } 1715 } 1716 1717 return 0; 1718 } 1719 1720 int ehci_shutdown_phy(struct udevice *dev, struct phy *phy) 1721 { 1722 int ret = 0; 1723 1724 if (!phy) 1725 return 0; 1726 1727 if (generic_phy_valid(phy)) { 1728 ret = generic_phy_power_off(phy); 1729 if (ret) { 1730 dev_err(dev, "failed to power off usb phy\n"); 1731 return ret; 1732 } 1733 1734 ret = generic_phy_exit(phy); 1735 if (ret) { 1736 dev_err(dev, "failed to power off usb phy\n"); 1737 return ret; 1738 } 1739 } 1740 1741 return 0; 1742 } 1743 #else 1744 int ehci_setup_phy(struct udevice *dev, struct phy *phy, int index) 1745 { 1746 return 0; 1747 } 1748 1749 int ehci_shutdown_phy(struct udevice *dev, struct phy *phy) 1750 { 1751 return 0; 1752 } 1753 #endif 1754