1 /* 2 * (C) Copyright 2009, 2011 Freescale Semiconductor, Inc. 3 * 4 * (C) Copyright 2008, Excito Elektronik i Sk=E5ne AB 5 * 6 * Author: Tor Krill tor@excito.com 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <pci.h> 13 #include <usb.h> 14 #include <asm/io.h> 15 #include <usb/ehci-fsl.h> 16 #include <hwconfig.h> 17 #include <fsl_usb.h> 18 #include <fdt_support.h> 19 20 #include "ehci.h" 21 22 #ifndef CONFIG_USB_MAX_CONTROLLER_COUNT 23 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 24 #endif 25 26 static void set_txfifothresh(struct usb_ehci *, u32); 27 28 /* Check USB PHY clock valid */ 29 static int usb_phy_clk_valid(struct usb_ehci *ehci) 30 { 31 if (!((in_be32(&ehci->control) & PHY_CLK_VALID) || 32 in_be32(&ehci->prictrl))) { 33 printf("USB PHY clock invalid!\n"); 34 return 0; 35 } else { 36 return 1; 37 } 38 } 39 40 /* 41 * Create the appropriate control structures to manage 42 * a new EHCI host controller. 43 * 44 * Excerpts from linux ehci fsl driver. 45 */ 46 int ehci_hcd_init(int index, enum usb_init_type init, 47 struct ehci_hccr **hccr, struct ehci_hcor **hcor) 48 { 49 struct usb_ehci *ehci = NULL; 50 const char *phy_type = NULL; 51 size_t len; 52 char current_usb_controller[5]; 53 #ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY 54 char usb_phy[5]; 55 56 usb_phy[0] = '\0'; 57 #endif 58 if (has_erratum_a007075()) { 59 /* 60 * A 5ms delay is needed after applying soft-reset to the 61 * controller to let external ULPI phy come out of reset. 62 * This delay needs to be added before re-initializing 63 * the controller after soft-resetting completes 64 */ 65 mdelay(5); 66 } 67 memset(current_usb_controller, '\0', 5); 68 snprintf(current_usb_controller, 4, "usb%d", index+1); 69 70 switch (index) { 71 case 0: 72 ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR; 73 break; 74 case 1: 75 ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB2_ADDR; 76 break; 77 default: 78 printf("ERROR: wrong controller index!!\n"); 79 break; 80 }; 81 82 *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); 83 *hcor = (struct ehci_hcor *)((uint32_t) *hccr + 84 HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); 85 86 /* Set to Host mode */ 87 setbits_le32(&ehci->usbmode, CM_HOST); 88 89 out_be32(&ehci->snoop1, SNOOP_SIZE_2GB); 90 out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB); 91 92 /* Init phy */ 93 if (hwconfig_sub(current_usb_controller, "phy_type")) 94 phy_type = hwconfig_subarg(current_usb_controller, 95 "phy_type", &len); 96 else 97 phy_type = getenv("usb_phy_type"); 98 99 if (!phy_type) { 100 #ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY 101 /* if none specified assume internal UTMI */ 102 strcpy(usb_phy, "utmi"); 103 phy_type = usb_phy; 104 #else 105 printf("WARNING: USB phy type not defined !!\n"); 106 return -1; 107 #endif 108 } 109 110 if (!strncmp(phy_type, "utmi", 4)) { 111 #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY) 112 clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, 113 PHY_CLK_SEL_UTMI); 114 clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, 115 UTMI_PHY_EN); 116 udelay(1000); /* delay required for PHY Clk to appear */ 117 #endif 118 out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI); 119 clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, 120 USB_EN); 121 } else { 122 clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, 123 PHY_CLK_SEL_ULPI); 124 clrsetbits_be32(&ehci->control, UTMI_PHY_EN | 125 CONTROL_REGISTER_W1C_MASK, USB_EN); 126 udelay(1000); /* delay required for PHY Clk to appear */ 127 if (!usb_phy_clk_valid(ehci)) 128 return -EINVAL; 129 out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI); 130 } 131 132 out_be32(&ehci->prictrl, 0x0000000c); 133 out_be32(&ehci->age_cnt_limit, 0x00000040); 134 out_be32(&ehci->sictrl, 0x00000001); 135 136 in_le32(&ehci->usbmode); 137 138 if (has_erratum_a007798()) 139 set_txfifothresh(ehci, TXFIFOTHRESH); 140 141 if (has_erratum_a004477()) { 142 /* 143 * When reset is issued while any ULPI transaction is ongoing 144 * then it may result to corruption of ULPI Function Control 145 * Register which eventually causes phy clock to enter low 146 * power mode which stops the clock. Thus delay is required 147 * before reset to let ongoing ULPI transaction complete. 148 */ 149 udelay(1); 150 } 151 return 0; 152 } 153 154 /* 155 * Destroy the appropriate control structures corresponding 156 * the the EHCI host controller. 157 */ 158 int ehci_hcd_stop(int index) 159 { 160 return 0; 161 } 162 163 /* 164 * Setting the value of TXFIFO_THRESH field in TXFILLTUNING register 165 * to counter DDR latencies in writing data into Tx buffer. 166 * This prevents Tx buffer from getting underrun 167 */ 168 static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh) 169 { 170 u32 cmd; 171 cmd = ehci_readl(&ehci->txfilltuning); 172 cmd &= ~TXFIFO_THRESH_MASK; 173 cmd |= TXFIFO_THRESH(txfifo_thresh); 174 ehci_writel(&ehci->txfilltuning, cmd); 175 } 176 177 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 178 static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, 179 const char *phy_type, int start_offset) 180 { 181 const char *compat_dr = "fsl-usb2-dr"; 182 const char *compat_mph = "fsl-usb2-mph"; 183 const char *prop_mode = "dr_mode"; 184 const char *prop_type = "phy_type"; 185 const char *node_type = NULL; 186 int node_offset; 187 int err; 188 189 node_offset = fdt_node_offset_by_compatible(blob, 190 start_offset, compat_mph); 191 if (node_offset < 0) { 192 node_offset = fdt_node_offset_by_compatible(blob, 193 start_offset, 194 compat_dr); 195 if (node_offset < 0) { 196 printf("WARNING: could not find compatible node: %s", 197 fdt_strerror(node_offset)); 198 return -1; 199 } 200 node_type = compat_dr; 201 } else { 202 node_type = compat_mph; 203 } 204 205 if (mode) { 206 err = fdt_setprop(blob, node_offset, prop_mode, mode, 207 strlen(mode) + 1); 208 if (err < 0) 209 printf("WARNING: could not set %s for %s: %s.\n", 210 prop_mode, node_type, fdt_strerror(err)); 211 } 212 213 if (phy_type) { 214 err = fdt_setprop(blob, node_offset, prop_type, phy_type, 215 strlen(phy_type) + 1); 216 if (err < 0) 217 printf("WARNING: could not set %s for %s: %s.\n", 218 prop_type, node_type, fdt_strerror(err)); 219 } 220 221 return node_offset; 222 } 223 224 static const char *fdt_usb_get_node_type(void *blob, int start_offset, 225 int *node_offset) 226 { 227 const char *compat_dr = "fsl-usb2-dr"; 228 const char *compat_mph = "fsl-usb2-mph"; 229 const char *node_type = NULL; 230 231 *node_offset = fdt_node_offset_by_compatible(blob, start_offset, 232 compat_mph); 233 if (*node_offset < 0) { 234 *node_offset = fdt_node_offset_by_compatible(blob, 235 start_offset, 236 compat_dr); 237 if (*node_offset < 0) { 238 printf("ERROR: could not find compatible node: %s\n", 239 fdt_strerror(*node_offset)); 240 } else { 241 node_type = compat_dr; 242 } 243 } else { 244 node_type = compat_mph; 245 } 246 247 return node_type; 248 } 249 250 static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum, 251 int start_offset) 252 { 253 int node_offset, err; 254 const char *node_type = NULL; 255 256 node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset); 257 if (!node_type) 258 return -1; 259 260 err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0); 261 if (err < 0) { 262 printf("ERROR: could not set %s for %s: %s.\n", 263 prop_erratum, node_type, fdt_strerror(err)); 264 } 265 266 return node_offset; 267 } 268 269 void fdt_fixup_dr_usb(void *blob, bd_t *bd) 270 { 271 static const char * const modes[] = { "host", "peripheral", "otg" }; 272 static const char * const phys[] = { "ulpi", "utmi", "utmi_dual" }; 273 int usb_erratum_a006261_off = -1; 274 int usb_erratum_a007075_off = -1; 275 int usb_erratum_a007792_off = -1; 276 int usb_erratum_a005697_off = -1; 277 int usb_mode_off = -1; 278 int usb_phy_off = -1; 279 char str[5]; 280 int i, j; 281 282 for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) { 283 const char *dr_mode_type = NULL; 284 const char *dr_phy_type = NULL; 285 int mode_idx = -1, phy_idx = -1; 286 287 snprintf(str, 5, "%s%d", "usb", i); 288 if (hwconfig(str)) { 289 for (j = 0; j < ARRAY_SIZE(modes); j++) { 290 if (hwconfig_subarg_cmp(str, "dr_mode", 291 modes[j])) { 292 mode_idx = j; 293 break; 294 } 295 } 296 297 for (j = 0; j < ARRAY_SIZE(phys); j++) { 298 if (hwconfig_subarg_cmp(str, "phy_type", 299 phys[j])) { 300 phy_idx = j; 301 break; 302 } 303 } 304 305 if (mode_idx < 0 && phy_idx < 0) { 306 printf("WARNING: invalid phy or mode\n"); 307 return; 308 } 309 310 if (mode_idx > -1) 311 dr_mode_type = modes[mode_idx]; 312 313 if (phy_idx > -1) 314 dr_phy_type = phys[phy_idx]; 315 } 316 317 if (has_dual_phy()) 318 dr_phy_type = phys[2]; 319 320 usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, 321 dr_mode_type, NULL, 322 usb_mode_off); 323 324 if (usb_mode_off < 0) 325 return; 326 327 usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, 328 NULL, dr_phy_type, 329 usb_phy_off); 330 331 if (usb_phy_off < 0) 332 return; 333 334 if (has_erratum_a006261()) { 335 usb_erratum_a006261_off = fdt_fixup_usb_erratum 336 (blob, 337 "fsl,usb-erratum-a006261", 338 usb_erratum_a006261_off); 339 if (usb_erratum_a006261_off < 0) 340 return; 341 } 342 343 if (has_erratum_a007075()) { 344 usb_erratum_a007075_off = fdt_fixup_usb_erratum 345 (blob, 346 "fsl,usb-erratum-a007075", 347 usb_erratum_a007075_off); 348 if (usb_erratum_a007075_off < 0) 349 return; 350 } 351 352 if (has_erratum_a007792()) { 353 usb_erratum_a007792_off = fdt_fixup_usb_erratum 354 (blob, 355 "fsl,usb-erratum-a007792", 356 usb_erratum_a007792_off); 357 if (usb_erratum_a007792_off < 0) 358 return; 359 } 360 if (has_erratum_a005697()) { 361 usb_erratum_a005697_off = fdt_fixup_usb_erratum 362 (blob, 363 "fsl,usb-erratum-a005697", 364 usb_erratum_a005697_off); 365 if (usb_erratum_a005697_off < 0) 366 return; 367 } 368 } 369 } 370 #endif 371