1 /* 2 * (C) Copyright 2009, 2011, 2016 Freescale Semiconductor, Inc. 3 * 4 * (C) Copyright 2008, Excito Elektronik i Sk=E5ne AB 5 * 6 * Author: Tor Krill tor@excito.com 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <pci.h> 13 #include <usb.h> 14 #include <asm/io.h> 15 #include <usb/ehci-ci.h> 16 #include <hwconfig.h> 17 #include <fsl_usb.h> 18 #include <fdt_support.h> 19 #include <dm.h> 20 21 #include "ehci.h" 22 23 DECLARE_GLOBAL_DATA_PTR; 24 25 #ifndef CONFIG_USB_MAX_CONTROLLER_COUNT 26 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 27 #endif 28 29 #ifdef CONFIG_DM_USB 30 struct ehci_fsl_priv { 31 struct ehci_ctrl ehci; 32 fdt_addr_t hcd_base; 33 char *phy_type; 34 }; 35 #endif 36 37 static void set_txfifothresh(struct usb_ehci *, u32); 38 #ifdef CONFIG_DM_USB 39 static int ehci_fsl_init(struct ehci_fsl_priv *priv, struct usb_ehci *ehci, 40 struct ehci_hccr *hccr, struct ehci_hcor *hcor); 41 #else 42 static int ehci_fsl_init(int index, struct usb_ehci *ehci, 43 struct ehci_hccr *hccr, struct ehci_hcor *hcor); 44 #endif 45 46 /* Check USB PHY clock valid */ 47 static int usb_phy_clk_valid(struct usb_ehci *ehci) 48 { 49 if (!((in_be32(&ehci->control) & PHY_CLK_VALID) || 50 in_be32(&ehci->prictrl))) { 51 printf("USB PHY clock invalid!\n"); 52 return 0; 53 } else { 54 return 1; 55 } 56 } 57 58 #ifdef CONFIG_DM_USB 59 static int ehci_fsl_ofdata_to_platdata(struct udevice *dev) 60 { 61 struct ehci_fsl_priv *priv = dev_get_priv(dev); 62 const void *prop; 63 64 prop = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy_type", 65 NULL); 66 if (prop) { 67 priv->phy_type = (char *)prop; 68 debug("phy_type %s\n", priv->phy_type); 69 } 70 71 return 0; 72 } 73 74 static int ehci_fsl_init_after_reset(struct ehci_ctrl *ctrl) 75 { 76 struct usb_ehci *ehci = NULL; 77 struct ehci_fsl_priv *priv = container_of(ctrl, struct ehci_fsl_priv, 78 ehci); 79 80 ehci = (struct usb_ehci *)priv->hcd_base; 81 if (ehci_fsl_init(priv, ehci, priv->ehci.hccr, priv->ehci.hcor) < 0) 82 return -ENXIO; 83 84 return 0; 85 } 86 87 static const struct ehci_ops fsl_ehci_ops = { 88 .init_after_reset = ehci_fsl_init_after_reset, 89 }; 90 91 static int ehci_fsl_probe(struct udevice *dev) 92 { 93 struct ehci_fsl_priv *priv = dev_get_priv(dev); 94 struct usb_ehci *ehci = NULL; 95 struct ehci_hccr *hccr; 96 struct ehci_hcor *hcor; 97 98 /* 99 * Get the base address for EHCI controller from the device node 100 */ 101 priv->hcd_base = dev_get_addr(dev); 102 if (priv->hcd_base == FDT_ADDR_T_NONE) { 103 debug("Can't get the EHCI register base address\n"); 104 return -ENXIO; 105 } 106 ehci = (struct usb_ehci *)priv->hcd_base; 107 hccr = (struct ehci_hccr *)(&ehci->caplength); 108 hcor = (struct ehci_hcor *) 109 ((u32)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); 110 111 if (ehci_fsl_init(priv, ehci, hccr, hcor) < 0) 112 return -ENXIO; 113 114 debug("ehci-fsl: init hccr %x and hcor %x hc_length %d\n", 115 (u32)hccr, (u32)hcor, 116 (u32)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); 117 118 return ehci_register(dev, hccr, hcor, &fsl_ehci_ops, 0, USB_INIT_HOST); 119 } 120 121 static const struct udevice_id ehci_usb_ids[] = { 122 { .compatible = "fsl-usb2-mph", }, 123 { .compatible = "fsl-usb2-dr", }, 124 { } 125 }; 126 127 U_BOOT_DRIVER(ehci_fsl) = { 128 .name = "ehci_fsl", 129 .id = UCLASS_USB, 130 .of_match = ehci_usb_ids, 131 .ofdata_to_platdata = ehci_fsl_ofdata_to_platdata, 132 .probe = ehci_fsl_probe, 133 .remove = ehci_deregister, 134 .ops = &ehci_usb_ops, 135 .platdata_auto_alloc_size = sizeof(struct usb_platdata), 136 .priv_auto_alloc_size = sizeof(struct ehci_fsl_priv), 137 .flags = DM_FLAG_ALLOC_PRIV_DMA, 138 }; 139 #else 140 /* 141 * Create the appropriate control structures to manage 142 * a new EHCI host controller. 143 * 144 * Excerpts from linux ehci fsl driver. 145 */ 146 int ehci_hcd_init(int index, enum usb_init_type init, 147 struct ehci_hccr **hccr, struct ehci_hcor **hcor) 148 { 149 struct usb_ehci *ehci = NULL; 150 151 switch (index) { 152 case 0: 153 ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR; 154 break; 155 case 1: 156 ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB2_ADDR; 157 break; 158 default: 159 printf("ERROR: wrong controller index!!\n"); 160 return -EINVAL; 161 }; 162 163 *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); 164 *hcor = (struct ehci_hcor *)((uint32_t) *hccr + 165 HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); 166 167 return ehci_fsl_init(index, ehci, *hccr, *hcor); 168 } 169 170 /* 171 * Destroy the appropriate control structures corresponding 172 * the the EHCI host controller. 173 */ 174 int ehci_hcd_stop(int index) 175 { 176 return 0; 177 } 178 #endif 179 180 #ifdef CONFIG_DM_USB 181 static int ehci_fsl_init(struct ehci_fsl_priv *priv, struct usb_ehci *ehci, 182 struct ehci_hccr *hccr, struct ehci_hcor *hcor) 183 #else 184 static int ehci_fsl_init(int index, struct usb_ehci *ehci, 185 struct ehci_hccr *hccr, struct ehci_hcor *hcor) 186 #endif 187 { 188 const char *phy_type = NULL; 189 #ifndef CONFIG_DM_USB 190 size_t len; 191 char current_usb_controller[5]; 192 #endif 193 #ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY 194 char usb_phy[5]; 195 196 usb_phy[0] = '\0'; 197 #endif 198 if (has_erratum_a007075()) { 199 /* 200 * A 5ms delay is needed after applying soft-reset to the 201 * controller to let external ULPI phy come out of reset. 202 * This delay needs to be added before re-initializing 203 * the controller after soft-resetting completes 204 */ 205 mdelay(5); 206 } 207 208 /* Set to Host mode */ 209 setbits_le32(&ehci->usbmode, CM_HOST); 210 211 out_be32(&ehci->snoop1, SNOOP_SIZE_2GB); 212 out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB); 213 214 /* Init phy */ 215 #ifdef CONFIG_DM_USB 216 if (priv->phy_type) 217 phy_type = priv->phy_type; 218 #else 219 memset(current_usb_controller, '\0', 5); 220 snprintf(current_usb_controller, sizeof(current_usb_controller), 221 "usb%d", index+1); 222 223 if (hwconfig_sub(current_usb_controller, "phy_type")) 224 phy_type = hwconfig_subarg(current_usb_controller, 225 "phy_type", &len); 226 #endif 227 else 228 phy_type = getenv("usb_phy_type"); 229 230 if (!phy_type) { 231 #ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY 232 /* if none specified assume internal UTMI */ 233 strcpy(usb_phy, "utmi"); 234 phy_type = usb_phy; 235 #else 236 printf("WARNING: USB phy type not defined !!\n"); 237 return -1; 238 #endif 239 } 240 241 if (!strncmp(phy_type, "utmi", 4)) { 242 #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY) 243 clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, 244 PHY_CLK_SEL_UTMI); 245 clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, 246 UTMI_PHY_EN); 247 udelay(1000); /* delay required for PHY Clk to appear */ 248 #endif 249 out_le32(&(hcor)->or_portsc[0], PORT_PTS_UTMI); 250 clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, 251 USB_EN); 252 } else { 253 clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, 254 PHY_CLK_SEL_ULPI); 255 clrsetbits_be32(&ehci->control, UTMI_PHY_EN | 256 CONTROL_REGISTER_W1C_MASK, USB_EN); 257 udelay(1000); /* delay required for PHY Clk to appear */ 258 if (!usb_phy_clk_valid(ehci)) 259 return -EINVAL; 260 out_le32(&(hcor)->or_portsc[0], PORT_PTS_ULPI); 261 } 262 263 out_be32(&ehci->prictrl, 0x0000000c); 264 out_be32(&ehci->age_cnt_limit, 0x00000040); 265 out_be32(&ehci->sictrl, 0x00000001); 266 267 in_le32(&ehci->usbmode); 268 269 if (has_erratum_a007798()) 270 set_txfifothresh(ehci, TXFIFOTHRESH); 271 272 if (has_erratum_a004477()) { 273 /* 274 * When reset is issued while any ULPI transaction is ongoing 275 * then it may result to corruption of ULPI Function Control 276 * Register which eventually causes phy clock to enter low 277 * power mode which stops the clock. Thus delay is required 278 * before reset to let ongoing ULPI transaction complete. 279 */ 280 udelay(1); 281 } 282 return 0; 283 } 284 285 /* 286 * Setting the value of TXFIFO_THRESH field in TXFILLTUNING register 287 * to counter DDR latencies in writing data into Tx buffer. 288 * This prevents Tx buffer from getting underrun 289 */ 290 static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh) 291 { 292 u32 cmd; 293 cmd = ehci_readl(&ehci->txfilltuning); 294 cmd &= ~TXFIFO_THRESH_MASK; 295 cmd |= TXFIFO_THRESH(txfifo_thresh); 296 ehci_writel(&ehci->txfilltuning, cmd); 297 } 298