1 /* 2 * Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org> 3 * Copyright (C) 2014 Marek Vasut <marex@denx.de> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <dm.h> 10 #include <errno.h> 11 #include <usb.h> 12 #include <malloc.h> 13 #include <memalign.h> 14 #include <phys2bus.h> 15 #include <usbroothubdes.h> 16 #include <wait_bit.h> 17 #include <asm/io.h> 18 #include <power/regulator.h> 19 20 #include "dwc2.h" 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 /* Use only HC channel 0. */ 25 #define DWC2_HC_CHANNEL 0 26 27 #define DWC2_STATUS_BUF_SIZE 64 28 #define DWC2_DATA_BUF_SIZE (64 * 1024) 29 30 #define MAX_DEVICE 16 31 #define MAX_ENDPOINT 16 32 33 struct dwc2_priv { 34 #ifdef CONFIG_DM_USB 35 uint8_t aligned_buffer[DWC2_DATA_BUF_SIZE] __aligned(ARCH_DMA_MINALIGN); 36 uint8_t status_buffer[DWC2_STATUS_BUF_SIZE] __aligned(ARCH_DMA_MINALIGN); 37 #else 38 uint8_t *aligned_buffer; 39 uint8_t *status_buffer; 40 #endif 41 u8 in_data_toggle[MAX_DEVICE][MAX_ENDPOINT]; 42 u8 out_data_toggle[MAX_DEVICE][MAX_ENDPOINT]; 43 struct dwc2_core_regs *regs; 44 int root_hub_devnum; 45 bool ext_vbus; 46 /* 47 * The hnp/srp capability must be disabled if the platform 48 * does't support hnp/srp. Otherwise the force mode can't work. 49 */ 50 bool hnp_srp_disable; 51 bool oc_disable; 52 }; 53 54 #ifndef CONFIG_DM_USB 55 /* We need cacheline-aligned buffers for DMA transfers and dcache support */ 56 DEFINE_ALIGN_BUFFER(uint8_t, aligned_buffer_addr, DWC2_DATA_BUF_SIZE, 57 ARCH_DMA_MINALIGN); 58 DEFINE_ALIGN_BUFFER(uint8_t, status_buffer_addr, DWC2_STATUS_BUF_SIZE, 59 ARCH_DMA_MINALIGN); 60 61 static struct dwc2_priv local; 62 #endif 63 64 /* 65 * DWC2 IP interface 66 */ 67 68 /* 69 * Initializes the FSLSPClkSel field of the HCFG register 70 * depending on the PHY type. 71 */ 72 static void init_fslspclksel(struct dwc2_core_regs *regs) 73 { 74 uint32_t phyclk; 75 76 #if (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS) 77 phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */ 78 #else 79 /* High speed PHY running at full speed or high speed */ 80 phyclk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ; 81 #endif 82 83 #ifdef CONFIG_DWC2_ULPI_FS_LS 84 uint32_t hwcfg2 = readl(®s->ghwcfg2); 85 uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >> 86 DWC2_HWCFG2_HS_PHY_TYPE_OFFSET; 87 uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >> 88 DWC2_HWCFG2_FS_PHY_TYPE_OFFSET; 89 90 if (hval == 2 && fval == 1) 91 phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */ 92 #endif 93 94 clrsetbits_le32(®s->host_regs.hcfg, 95 DWC2_HCFG_FSLSPCLKSEL_MASK, 96 phyclk << DWC2_HCFG_FSLSPCLKSEL_OFFSET); 97 } 98 99 /* 100 * Flush a Tx FIFO. 101 * 102 * @param regs Programming view of DWC_otg controller. 103 * @param num Tx FIFO to flush. 104 */ 105 static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num) 106 { 107 int ret; 108 109 writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET), 110 ®s->grstctl); 111 ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_TXFFLSH, 112 false, 1000, false); 113 if (ret) 114 printf("%s: Timeout!\n", __func__); 115 116 /* Wait for 3 PHY Clocks */ 117 udelay(1); 118 } 119 120 /* 121 * Flush Rx FIFO. 122 * 123 * @param regs Programming view of DWC_otg controller. 124 */ 125 static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs) 126 { 127 int ret; 128 129 writel(DWC2_GRSTCTL_RXFFLSH, ®s->grstctl); 130 ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_RXFFLSH, 131 false, 1000, false); 132 if (ret) 133 printf("%s: Timeout!\n", __func__); 134 135 /* Wait for 3 PHY Clocks */ 136 udelay(1); 137 } 138 139 /* 140 * Do core a soft reset of the core. Be careful with this because it 141 * resets all the internal state machines of the core. 142 */ 143 static void dwc_otg_core_reset(struct dwc2_core_regs *regs) 144 { 145 int ret; 146 147 /* Wait for AHB master IDLE state. */ 148 ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_AHBIDLE, 149 true, 1000, false); 150 if (ret) 151 printf("%s: Timeout!\n", __func__); 152 153 /* Core Soft Reset */ 154 writel(DWC2_GRSTCTL_CSFTRST, ®s->grstctl); 155 ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_CSFTRST, 156 false, 1000, false); 157 if (ret) 158 printf("%s: Timeout!\n", __func__); 159 160 /* 161 * Wait for core to come out of reset. 162 * NOTE: This long sleep is _very_ important, otherwise the core will 163 * not stay in host mode after a connector ID change! 164 */ 165 mdelay(100); 166 } 167 168 #if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR) 169 static int dwc_vbus_supply_init(struct udevice *dev) 170 { 171 struct udevice *vbus_supply; 172 int ret; 173 174 ret = device_get_supply_regulator(dev, "vbus-supply", &vbus_supply); 175 if (ret) { 176 debug("%s: No vbus supply\n", dev->name); 177 return 0; 178 } 179 180 ret = regulator_set_enable(vbus_supply, true); 181 if (ret) { 182 error("Error enabling vbus supply\n"); 183 return ret; 184 } 185 186 return 0; 187 } 188 #else 189 static int dwc_vbus_supply_init(struct udevice *dev) 190 { 191 return 0; 192 } 193 #endif 194 195 /* 196 * This function initializes the DWC_otg controller registers for 197 * host mode. 198 * 199 * This function flushes the Tx and Rx FIFOs and it flushes any entries in the 200 * request queues. Host channels are reset to ensure that they are ready for 201 * performing transfers. 202 * 203 * @param dev USB Device (NULL if driver model is not being used) 204 * @param regs Programming view of DWC_otg controller 205 * 206 */ 207 static void dwc_otg_core_host_init(struct udevice *dev, 208 struct dwc2_core_regs *regs) 209 { 210 uint32_t nptxfifosize = 0; 211 uint32_t ptxfifosize = 0; 212 uint32_t hprt0 = 0; 213 int i, ret, num_channels; 214 215 /* Restart the Phy Clock */ 216 writel(0, ®s->pcgcctl); 217 218 /* Initialize Host Configuration Register */ 219 init_fslspclksel(regs); 220 #ifdef CONFIG_DWC2_DFLT_SPEED_FULL 221 setbits_le32(®s->host_regs.hcfg, DWC2_HCFG_FSLSSUPP); 222 #endif 223 224 /* Configure data FIFO sizes */ 225 #ifdef CONFIG_DWC2_ENABLE_DYNAMIC_FIFO 226 if (readl(®s->ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) { 227 /* Rx FIFO */ 228 writel(CONFIG_DWC2_HOST_RX_FIFO_SIZE, ®s->grxfsiz); 229 230 /* Non-periodic Tx FIFO */ 231 nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE << 232 DWC2_FIFOSIZE_DEPTH_OFFSET; 233 nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE << 234 DWC2_FIFOSIZE_STARTADDR_OFFSET; 235 writel(nptxfifosize, ®s->gnptxfsiz); 236 237 /* Periodic Tx FIFO */ 238 ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE << 239 DWC2_FIFOSIZE_DEPTH_OFFSET; 240 ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE + 241 CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) << 242 DWC2_FIFOSIZE_STARTADDR_OFFSET; 243 writel(ptxfifosize, ®s->hptxfsiz); 244 } 245 #endif 246 247 /* Clear Host Set HNP Enable in the OTG Control Register */ 248 clrbits_le32(®s->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN); 249 250 /* Make sure the FIFOs are flushed. */ 251 dwc_otg_flush_tx_fifo(regs, 0x10); /* All Tx FIFOs */ 252 dwc_otg_flush_rx_fifo(regs); 253 254 /* Flush out any leftover queued requests. */ 255 num_channels = readl(®s->ghwcfg2); 256 num_channels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK; 257 num_channels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET; 258 num_channels += 1; 259 260 for (i = 0; i < num_channels; i++) 261 clrsetbits_le32(®s->hc_regs[i].hcchar, 262 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR, 263 DWC2_HCCHAR_CHDIS); 264 265 /* Halt all channels to put them into a known state. */ 266 for (i = 0; i < num_channels; i++) { 267 clrsetbits_le32(®s->hc_regs[i].hcchar, 268 DWC2_HCCHAR_EPDIR, 269 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS); 270 ret = wait_for_bit(__func__, ®s->hc_regs[i].hcchar, 271 DWC2_HCCHAR_CHEN, false, 1000, false); 272 if (ret) 273 printf("%s: Timeout!\n", __func__); 274 } 275 276 /* Turn on the vbus power. */ 277 if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) { 278 hprt0 = readl(®s->hprt0); 279 hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET); 280 hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG); 281 if (!(hprt0 & DWC2_HPRT0_PRTPWR)) { 282 hprt0 |= DWC2_HPRT0_PRTPWR; 283 writel(hprt0, ®s->hprt0); 284 } 285 } 286 287 if (dev) 288 dwc_vbus_supply_init(dev); 289 } 290 291 /* 292 * This function initializes the DWC_otg controller registers and 293 * prepares the core for device mode or host mode operation. 294 * 295 * @param regs Programming view of the DWC_otg controller 296 */ 297 static void dwc_otg_core_init(struct dwc2_priv *priv) 298 { 299 struct dwc2_core_regs *regs = priv->regs; 300 uint32_t ahbcfg = 0; 301 uint32_t usbcfg = 0; 302 uint8_t brst_sz = CONFIG_DWC2_DMA_BURST_SIZE; 303 304 /* Common Initialization */ 305 usbcfg = readl(®s->gusbcfg); 306 307 /* Program the ULPI External VBUS bit if needed */ 308 if (priv->ext_vbus) { 309 usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV; 310 if (!priv->oc_disable) { 311 usbcfg |= DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR | 312 DWC2_GUSBCFG_INDICATOR_PASSTHROUGH; 313 } 314 } else { 315 usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV; 316 } 317 318 /* Set external TS Dline pulsing */ 319 #ifdef CONFIG_DWC2_TS_DLINE 320 usbcfg |= DWC2_GUSBCFG_TERM_SEL_DL_PULSE; 321 #else 322 usbcfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE; 323 #endif 324 writel(usbcfg, ®s->gusbcfg); 325 326 /* Reset the Controller */ 327 dwc_otg_core_reset(regs); 328 329 /* 330 * This programming sequence needs to happen in FS mode before 331 * any other programming occurs 332 */ 333 #if defined(CONFIG_DWC2_DFLT_SPEED_FULL) && \ 334 (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS) 335 /* If FS mode with FS PHY */ 336 setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_PHYSEL); 337 338 /* Reset after a PHY select */ 339 dwc_otg_core_reset(regs); 340 341 /* 342 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. 343 * Also do this on HNP Dev/Host mode switches (done in dev_init 344 * and host_init). 345 */ 346 if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) 347 init_fslspclksel(regs); 348 349 #ifdef CONFIG_DWC2_I2C_ENABLE 350 /* Program GUSBCFG.OtgUtmifsSel to I2C */ 351 setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL); 352 353 /* Program GI2CCTL.I2CEn */ 354 clrsetbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN | 355 DWC2_GI2CCTL_I2CDEVADDR_MASK, 356 1 << DWC2_GI2CCTL_I2CDEVADDR_OFFSET); 357 setbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN); 358 #endif 359 360 #else 361 /* High speed PHY. */ 362 363 /* 364 * HS PHY parameters. These parameters are preserved during 365 * soft reset so only program the first time. Do a soft reset 366 * immediately after setting phyif. 367 */ 368 usbcfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF); 369 usbcfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET; 370 371 if (usbcfg & DWC2_GUSBCFG_ULPI_UTMI_SEL) { /* ULPI interface */ 372 #ifdef CONFIG_DWC2_PHY_ULPI_DDR 373 usbcfg |= DWC2_GUSBCFG_DDRSEL; 374 #else 375 usbcfg &= ~DWC2_GUSBCFG_DDRSEL; 376 #endif 377 } else { /* UTMI+ interface */ 378 #if (CONFIG_DWC2_UTMI_PHY_WIDTH == 16) 379 usbcfg |= DWC2_GUSBCFG_PHYIF; 380 #endif 381 } 382 383 writel(usbcfg, ®s->gusbcfg); 384 385 /* Reset after setting the PHY parameters */ 386 dwc_otg_core_reset(regs); 387 #endif 388 389 usbcfg = readl(®s->gusbcfg); 390 usbcfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M); 391 #ifdef CONFIG_DWC2_ULPI_FS_LS 392 uint32_t hwcfg2 = readl(®s->ghwcfg2); 393 uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >> 394 DWC2_HWCFG2_HS_PHY_TYPE_OFFSET; 395 uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >> 396 DWC2_HWCFG2_FS_PHY_TYPE_OFFSET; 397 if (hval == 2 && fval == 1) { 398 usbcfg |= DWC2_GUSBCFG_ULPI_FSLS; 399 usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M; 400 } 401 #endif 402 if (priv->hnp_srp_disable) 403 usbcfg |= DWC2_GUSBCFG_FORCEHOSTMODE; 404 405 writel(usbcfg, ®s->gusbcfg); 406 407 /* Program the GAHBCFG Register. */ 408 switch (readl(®s->ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) { 409 case DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY: 410 break; 411 case DWC2_HWCFG2_ARCHITECTURE_EXT_DMA: 412 while (brst_sz > 1) { 413 ahbcfg |= ahbcfg + (1 << DWC2_GAHBCFG_HBURSTLEN_OFFSET); 414 ahbcfg &= DWC2_GAHBCFG_HBURSTLEN_MASK; 415 brst_sz >>= 1; 416 } 417 418 #ifdef CONFIG_DWC2_DMA_ENABLE 419 ahbcfg |= DWC2_GAHBCFG_DMAENABLE; 420 #endif 421 break; 422 423 case DWC2_HWCFG2_ARCHITECTURE_INT_DMA: 424 ahbcfg |= DWC2_GAHBCFG_HBURSTLEN_INCR4; 425 #ifdef CONFIG_DWC2_DMA_ENABLE 426 ahbcfg |= DWC2_GAHBCFG_DMAENABLE; 427 #endif 428 break; 429 } 430 431 writel(ahbcfg, ®s->gahbcfg); 432 433 /* Program the capabilities in GUSBCFG Register */ 434 usbcfg = 0; 435 436 if (!priv->hnp_srp_disable) 437 usbcfg |= DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP; 438 #ifdef CONFIG_DWC2_IC_USB_CAP 439 usbcfg |= DWC2_GUSBCFG_IC_USB_CAP; 440 #endif 441 442 setbits_le32(®s->gusbcfg, usbcfg); 443 } 444 445 /* 446 * Prepares a host channel for transferring packets to/from a specific 447 * endpoint. The HCCHARn register is set up with the characteristics specified 448 * in _hc. Host channel interrupts that may need to be serviced while this 449 * transfer is in progress are enabled. 450 * 451 * @param regs Programming view of DWC_otg controller 452 * @param hc Information needed to initialize the host channel 453 */ 454 static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num, 455 struct usb_device *dev, uint8_t dev_addr, uint8_t ep_num, 456 uint8_t ep_is_in, uint8_t ep_type, uint16_t max_packet) 457 { 458 struct dwc2_hc_regs *hc_regs = ®s->hc_regs[hc_num]; 459 uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) | 460 (ep_num << DWC2_HCCHAR_EPNUM_OFFSET) | 461 (ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) | 462 (ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) | 463 (max_packet << DWC2_HCCHAR_MPS_OFFSET); 464 465 if (dev->speed == USB_SPEED_LOW) 466 hcchar |= DWC2_HCCHAR_LSPDDEV; 467 468 /* 469 * Program the HCCHARn register with the endpoint characteristics 470 * for the current transfer. 471 */ 472 writel(hcchar, &hc_regs->hcchar); 473 474 /* Program the HCSPLIT register, default to no SPLIT */ 475 writel(0, &hc_regs->hcsplt); 476 } 477 478 static void dwc_otg_hc_init_split(struct dwc2_hc_regs *hc_regs, 479 uint8_t hub_devnum, uint8_t hub_port) 480 { 481 uint32_t hcsplt = 0; 482 483 hcsplt = DWC2_HCSPLT_SPLTENA; 484 hcsplt |= hub_devnum << DWC2_HCSPLT_HUBADDR_OFFSET; 485 hcsplt |= hub_port << DWC2_HCSPLT_PRTADDR_OFFSET; 486 487 /* Program the HCSPLIT register for SPLITs */ 488 writel(hcsplt, &hc_regs->hcsplt); 489 } 490 491 /* 492 * DWC2 to USB API interface 493 */ 494 /* Direction: In ; Request: Status */ 495 static int dwc_otg_submit_rh_msg_in_status(struct dwc2_core_regs *regs, 496 struct usb_device *dev, void *buffer, 497 int txlen, struct devrequest *cmd) 498 { 499 uint32_t hprt0 = 0; 500 uint32_t port_status = 0; 501 uint32_t port_change = 0; 502 int len = 0; 503 int stat = 0; 504 505 switch (cmd->requesttype & ~USB_DIR_IN) { 506 case 0: 507 *(uint16_t *)buffer = cpu_to_le16(1); 508 len = 2; 509 break; 510 case USB_RECIP_INTERFACE: 511 case USB_RECIP_ENDPOINT: 512 *(uint16_t *)buffer = cpu_to_le16(0); 513 len = 2; 514 break; 515 case USB_TYPE_CLASS: 516 *(uint32_t *)buffer = cpu_to_le32(0); 517 len = 4; 518 break; 519 case USB_RECIP_OTHER | USB_TYPE_CLASS: 520 hprt0 = readl(®s->hprt0); 521 if (hprt0 & DWC2_HPRT0_PRTCONNSTS) 522 port_status |= USB_PORT_STAT_CONNECTION; 523 if (hprt0 & DWC2_HPRT0_PRTENA) 524 port_status |= USB_PORT_STAT_ENABLE; 525 if (hprt0 & DWC2_HPRT0_PRTSUSP) 526 port_status |= USB_PORT_STAT_SUSPEND; 527 if (hprt0 & DWC2_HPRT0_PRTOVRCURRACT) 528 port_status |= USB_PORT_STAT_OVERCURRENT; 529 if (hprt0 & DWC2_HPRT0_PRTRST) 530 port_status |= USB_PORT_STAT_RESET; 531 if (hprt0 & DWC2_HPRT0_PRTPWR) 532 port_status |= USB_PORT_STAT_POWER; 533 534 if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) == DWC2_HPRT0_PRTSPD_LOW) 535 port_status |= USB_PORT_STAT_LOW_SPEED; 536 else if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) == 537 DWC2_HPRT0_PRTSPD_HIGH) 538 port_status |= USB_PORT_STAT_HIGH_SPEED; 539 540 if (hprt0 & DWC2_HPRT0_PRTENCHNG) 541 port_change |= USB_PORT_STAT_C_ENABLE; 542 if (hprt0 & DWC2_HPRT0_PRTCONNDET) 543 port_change |= USB_PORT_STAT_C_CONNECTION; 544 if (hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG) 545 port_change |= USB_PORT_STAT_C_OVERCURRENT; 546 547 *(uint32_t *)buffer = cpu_to_le32(port_status | 548 (port_change << 16)); 549 len = 4; 550 break; 551 default: 552 puts("unsupported root hub command\n"); 553 stat = USB_ST_STALLED; 554 } 555 556 dev->act_len = min(len, txlen); 557 dev->status = stat; 558 559 return stat; 560 } 561 562 /* Direction: In ; Request: Descriptor */ 563 static int dwc_otg_submit_rh_msg_in_descriptor(struct usb_device *dev, 564 void *buffer, int txlen, 565 struct devrequest *cmd) 566 { 567 unsigned char data[32]; 568 uint32_t dsc; 569 int len = 0; 570 int stat = 0; 571 uint16_t wValue = cpu_to_le16(cmd->value); 572 uint16_t wLength = cpu_to_le16(cmd->length); 573 574 switch (cmd->requesttype & ~USB_DIR_IN) { 575 case 0: 576 switch (wValue & 0xff00) { 577 case 0x0100: /* device descriptor */ 578 len = min3(txlen, (int)sizeof(root_hub_dev_des), (int)wLength); 579 memcpy(buffer, root_hub_dev_des, len); 580 break; 581 case 0x0200: /* configuration descriptor */ 582 len = min3(txlen, (int)sizeof(root_hub_config_des), (int)wLength); 583 memcpy(buffer, root_hub_config_des, len); 584 break; 585 case 0x0300: /* string descriptors */ 586 switch (wValue & 0xff) { 587 case 0x00: 588 len = min3(txlen, (int)sizeof(root_hub_str_index0), 589 (int)wLength); 590 memcpy(buffer, root_hub_str_index0, len); 591 break; 592 case 0x01: 593 len = min3(txlen, (int)sizeof(root_hub_str_index1), 594 (int)wLength); 595 memcpy(buffer, root_hub_str_index1, len); 596 break; 597 } 598 break; 599 default: 600 stat = USB_ST_STALLED; 601 } 602 break; 603 604 case USB_TYPE_CLASS: 605 /* Root port config, set 1 port and nothing else. */ 606 dsc = 0x00000001; 607 608 data[0] = 9; /* min length; */ 609 data[1] = 0x29; 610 data[2] = dsc & RH_A_NDP; 611 data[3] = 0; 612 if (dsc & RH_A_PSM) 613 data[3] |= 0x1; 614 if (dsc & RH_A_NOCP) 615 data[3] |= 0x10; 616 else if (dsc & RH_A_OCPM) 617 data[3] |= 0x8; 618 619 /* corresponds to data[4-7] */ 620 data[5] = (dsc & RH_A_POTPGT) >> 24; 621 data[7] = dsc & RH_B_DR; 622 if (data[2] < 7) { 623 data[8] = 0xff; 624 } else { 625 data[0] += 2; 626 data[8] = (dsc & RH_B_DR) >> 8; 627 data[9] = 0xff; 628 data[10] = data[9]; 629 } 630 631 len = min3(txlen, (int)data[0], (int)wLength); 632 memcpy(buffer, data, len); 633 break; 634 default: 635 puts("unsupported root hub command\n"); 636 stat = USB_ST_STALLED; 637 } 638 639 dev->act_len = min(len, txlen); 640 dev->status = stat; 641 642 return stat; 643 } 644 645 /* Direction: In ; Request: Configuration */ 646 static int dwc_otg_submit_rh_msg_in_configuration(struct usb_device *dev, 647 void *buffer, int txlen, 648 struct devrequest *cmd) 649 { 650 int len = 0; 651 int stat = 0; 652 653 switch (cmd->requesttype & ~USB_DIR_IN) { 654 case 0: 655 *(uint8_t *)buffer = 0x01; 656 len = 1; 657 break; 658 default: 659 puts("unsupported root hub command\n"); 660 stat = USB_ST_STALLED; 661 } 662 663 dev->act_len = min(len, txlen); 664 dev->status = stat; 665 666 return stat; 667 } 668 669 /* Direction: In */ 670 static int dwc_otg_submit_rh_msg_in(struct dwc2_priv *priv, 671 struct usb_device *dev, void *buffer, 672 int txlen, struct devrequest *cmd) 673 { 674 switch (cmd->request) { 675 case USB_REQ_GET_STATUS: 676 return dwc_otg_submit_rh_msg_in_status(priv->regs, dev, buffer, 677 txlen, cmd); 678 case USB_REQ_GET_DESCRIPTOR: 679 return dwc_otg_submit_rh_msg_in_descriptor(dev, buffer, 680 txlen, cmd); 681 case USB_REQ_GET_CONFIGURATION: 682 return dwc_otg_submit_rh_msg_in_configuration(dev, buffer, 683 txlen, cmd); 684 default: 685 puts("unsupported root hub command\n"); 686 return USB_ST_STALLED; 687 } 688 } 689 690 /* Direction: Out */ 691 static int dwc_otg_submit_rh_msg_out(struct dwc2_priv *priv, 692 struct usb_device *dev, 693 void *buffer, int txlen, 694 struct devrequest *cmd) 695 { 696 struct dwc2_core_regs *regs = priv->regs; 697 int len = 0; 698 int stat = 0; 699 uint16_t bmrtype_breq = cmd->requesttype | (cmd->request << 8); 700 uint16_t wValue = cpu_to_le16(cmd->value); 701 702 switch (bmrtype_breq & ~USB_DIR_IN) { 703 case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_ENDPOINT: 704 case (USB_REQ_CLEAR_FEATURE << 8) | USB_TYPE_CLASS: 705 break; 706 707 case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS: 708 switch (wValue) { 709 case USB_PORT_FEAT_C_CONNECTION: 710 setbits_le32(®s->hprt0, DWC2_HPRT0_PRTCONNDET); 711 break; 712 } 713 break; 714 715 case (USB_REQ_SET_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS: 716 switch (wValue) { 717 case USB_PORT_FEAT_SUSPEND: 718 break; 719 720 case USB_PORT_FEAT_RESET: 721 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 722 DWC2_HPRT0_PRTCONNDET | 723 DWC2_HPRT0_PRTENCHNG | 724 DWC2_HPRT0_PRTOVRCURRCHNG, 725 DWC2_HPRT0_PRTRST); 726 mdelay(50); 727 clrbits_le32(®s->hprt0, DWC2_HPRT0_PRTRST); 728 break; 729 730 case USB_PORT_FEAT_POWER: 731 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 732 DWC2_HPRT0_PRTCONNDET | 733 DWC2_HPRT0_PRTENCHNG | 734 DWC2_HPRT0_PRTOVRCURRCHNG, 735 DWC2_HPRT0_PRTRST); 736 break; 737 738 case USB_PORT_FEAT_ENABLE: 739 break; 740 } 741 break; 742 case (USB_REQ_SET_ADDRESS << 8): 743 priv->root_hub_devnum = wValue; 744 break; 745 case (USB_REQ_SET_CONFIGURATION << 8): 746 break; 747 default: 748 puts("unsupported root hub command\n"); 749 stat = USB_ST_STALLED; 750 } 751 752 len = min(len, txlen); 753 754 dev->act_len = len; 755 dev->status = stat; 756 757 return stat; 758 } 759 760 static int dwc_otg_submit_rh_msg(struct dwc2_priv *priv, struct usb_device *dev, 761 unsigned long pipe, void *buffer, int txlen, 762 struct devrequest *cmd) 763 { 764 int stat = 0; 765 766 if (usb_pipeint(pipe)) { 767 puts("Root-Hub submit IRQ: NOT implemented\n"); 768 return 0; 769 } 770 771 if (cmd->requesttype & USB_DIR_IN) 772 stat = dwc_otg_submit_rh_msg_in(priv, dev, buffer, txlen, cmd); 773 else 774 stat = dwc_otg_submit_rh_msg_out(priv, dev, buffer, txlen, cmd); 775 776 mdelay(1); 777 778 return stat; 779 } 780 781 int wait_for_chhltd(struct dwc2_hc_regs *hc_regs, uint32_t *sub, u8 *toggle) 782 { 783 int ret; 784 uint32_t hcint, hctsiz; 785 786 ret = wait_for_bit(__func__, &hc_regs->hcint, DWC2_HCINT_CHHLTD, true, 787 1000, false); 788 if (ret) 789 return ret; 790 791 hcint = readl(&hc_regs->hcint); 792 hctsiz = readl(&hc_regs->hctsiz); 793 *sub = (hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK) >> 794 DWC2_HCTSIZ_XFERSIZE_OFFSET; 795 *toggle = (hctsiz & DWC2_HCTSIZ_PID_MASK) >> DWC2_HCTSIZ_PID_OFFSET; 796 797 debug("%s: HCINT=%08x sub=%u toggle=%d\n", __func__, hcint, *sub, 798 *toggle); 799 800 if (hcint & DWC2_HCINT_XFERCOMP) 801 return 0; 802 803 if (hcint & (DWC2_HCINT_NAK | DWC2_HCINT_FRMOVRUN)) 804 return -EAGAIN; 805 806 debug("%s: Error (HCINT=%08x)\n", __func__, hcint); 807 return -EINVAL; 808 } 809 810 static int dwc2_eptype[] = { 811 DWC2_HCCHAR_EPTYPE_ISOC, 812 DWC2_HCCHAR_EPTYPE_INTR, 813 DWC2_HCCHAR_EPTYPE_CONTROL, 814 DWC2_HCCHAR_EPTYPE_BULK, 815 }; 816 817 static int transfer_chunk(struct dwc2_hc_regs *hc_regs, void *aligned_buffer, 818 u8 *pid, int in, void *buffer, int num_packets, 819 int xfer_len, int *actual_len, int odd_frame) 820 { 821 int ret = 0; 822 uint32_t sub; 823 824 debug("%s: chunk: pid %d xfer_len %u pkts %u\n", __func__, 825 *pid, xfer_len, num_packets); 826 827 writel((xfer_len << DWC2_HCTSIZ_XFERSIZE_OFFSET) | 828 (num_packets << DWC2_HCTSIZ_PKTCNT_OFFSET) | 829 (*pid << DWC2_HCTSIZ_PID_OFFSET), 830 &hc_regs->hctsiz); 831 832 if (xfer_len) { 833 if (in) { 834 invalidate_dcache_range( 835 (uintptr_t)aligned_buffer, 836 (uintptr_t)aligned_buffer + 837 roundup(xfer_len, ARCH_DMA_MINALIGN)); 838 } else { 839 memcpy(aligned_buffer, buffer, xfer_len); 840 flush_dcache_range( 841 (uintptr_t)aligned_buffer, 842 (uintptr_t)aligned_buffer + 843 roundup(xfer_len, ARCH_DMA_MINALIGN)); 844 } 845 } 846 847 writel(phys_to_bus((unsigned long)aligned_buffer), &hc_regs->hcdma); 848 849 /* Clear old interrupt conditions for this host channel. */ 850 writel(0x3fff, &hc_regs->hcint); 851 852 /* Set host channel enable after all other setup is complete. */ 853 clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK | 854 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS | 855 DWC2_HCCHAR_ODDFRM, 856 (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | 857 (odd_frame << DWC2_HCCHAR_ODDFRM_OFFSET) | 858 DWC2_HCCHAR_CHEN); 859 860 ret = wait_for_chhltd(hc_regs, &sub, pid); 861 if (ret < 0) 862 return ret; 863 864 if (in) { 865 xfer_len -= sub; 866 867 invalidate_dcache_range((unsigned long)aligned_buffer, 868 (unsigned long)aligned_buffer + 869 roundup(xfer_len, ARCH_DMA_MINALIGN)); 870 871 memcpy(buffer, aligned_buffer, xfer_len); 872 } 873 *actual_len = xfer_len; 874 875 return ret; 876 } 877 878 int chunk_msg(struct dwc2_priv *priv, struct usb_device *dev, 879 unsigned long pipe, u8 *pid, int in, void *buffer, int len) 880 { 881 struct dwc2_core_regs *regs = priv->regs; 882 struct dwc2_hc_regs *hc_regs = ®s->hc_regs[DWC2_HC_CHANNEL]; 883 struct dwc2_host_regs *host_regs = ®s->host_regs; 884 int devnum = usb_pipedevice(pipe); 885 int ep = usb_pipeendpoint(pipe); 886 int max = usb_maxpacket(dev, pipe); 887 int eptype = dwc2_eptype[usb_pipetype(pipe)]; 888 int done = 0; 889 int ret = 0; 890 int do_split = 0; 891 int complete_split = 0; 892 uint32_t xfer_len; 893 uint32_t num_packets; 894 int stop_transfer = 0; 895 uint32_t max_xfer_len; 896 int ssplit_frame_num = 0; 897 898 debug("%s: msg: pipe %lx pid %d in %d len %d\n", __func__, pipe, *pid, 899 in, len); 900 901 max_xfer_len = CONFIG_DWC2_MAX_PACKET_COUNT * max; 902 if (max_xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE) 903 max_xfer_len = CONFIG_DWC2_MAX_TRANSFER_SIZE; 904 if (max_xfer_len > DWC2_DATA_BUF_SIZE) 905 max_xfer_len = DWC2_DATA_BUF_SIZE; 906 907 /* Make sure that max_xfer_len is a multiple of max packet size. */ 908 num_packets = max_xfer_len / max; 909 max_xfer_len = num_packets * max; 910 911 /* Initialize channel */ 912 dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, dev, devnum, ep, in, 913 eptype, max); 914 915 /* Check if the target is a FS/LS device behind a HS hub */ 916 if (dev->speed != USB_SPEED_HIGH) { 917 uint8_t hub_addr; 918 uint8_t hub_port; 919 uint32_t hprt0 = readl(®s->hprt0); 920 if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) == 921 DWC2_HPRT0_PRTSPD_HIGH) { 922 usb_find_usb2_hub_address_port(dev, &hub_addr, 923 &hub_port); 924 dwc_otg_hc_init_split(hc_regs, hub_addr, hub_port); 925 926 do_split = 1; 927 num_packets = 1; 928 max_xfer_len = max; 929 } 930 } 931 932 do { 933 int actual_len = 0; 934 uint32_t hcint; 935 int odd_frame = 0; 936 xfer_len = len - done; 937 938 if (xfer_len > max_xfer_len) 939 xfer_len = max_xfer_len; 940 else if (xfer_len > max) 941 num_packets = (xfer_len + max - 1) / max; 942 else 943 num_packets = 1; 944 945 if (complete_split) 946 setbits_le32(&hc_regs->hcsplt, DWC2_HCSPLT_COMPSPLT); 947 else if (do_split) 948 clrbits_le32(&hc_regs->hcsplt, DWC2_HCSPLT_COMPSPLT); 949 950 if (eptype == DWC2_HCCHAR_EPTYPE_INTR) { 951 int uframe_num = readl(&host_regs->hfnum); 952 if (!(uframe_num & 0x1)) 953 odd_frame = 1; 954 } 955 956 ret = transfer_chunk(hc_regs, priv->aligned_buffer, pid, 957 in, (char *)buffer + done, num_packets, 958 xfer_len, &actual_len, odd_frame); 959 960 hcint = readl(&hc_regs->hcint); 961 if (complete_split) { 962 stop_transfer = 0; 963 if (hcint & DWC2_HCINT_NYET) { 964 ret = 0; 965 int frame_num = DWC2_HFNUM_MAX_FRNUM & 966 readl(&host_regs->hfnum); 967 if (((frame_num - ssplit_frame_num) & 968 DWC2_HFNUM_MAX_FRNUM) > 4) 969 ret = -EAGAIN; 970 } else 971 complete_split = 0; 972 } else if (do_split) { 973 if (hcint & DWC2_HCINT_ACK) { 974 ssplit_frame_num = DWC2_HFNUM_MAX_FRNUM & 975 readl(&host_regs->hfnum); 976 ret = 0; 977 complete_split = 1; 978 } 979 } 980 981 if (ret) 982 break; 983 984 if (actual_len < xfer_len) 985 stop_transfer = 1; 986 987 done += actual_len; 988 989 /* Transactions are done when when either all data is transferred or 990 * there is a short transfer. In case of a SPLIT make sure the CSPLIT 991 * is executed. 992 */ 993 } while (((done < len) && !stop_transfer) || complete_split); 994 995 writel(0, &hc_regs->hcintmsk); 996 writel(0xFFFFFFFF, &hc_regs->hcint); 997 998 dev->status = 0; 999 dev->act_len = done; 1000 1001 return ret; 1002 } 1003 1004 /* U-Boot USB transmission interface */ 1005 int _submit_bulk_msg(struct dwc2_priv *priv, struct usb_device *dev, 1006 unsigned long pipe, void *buffer, int len) 1007 { 1008 int devnum = usb_pipedevice(pipe); 1009 int ep = usb_pipeendpoint(pipe); 1010 u8* pid; 1011 1012 if ((devnum >= MAX_DEVICE) || (devnum == priv->root_hub_devnum)) { 1013 dev->status = 0; 1014 return -EINVAL; 1015 } 1016 1017 if (usb_pipein(pipe)) 1018 pid = &priv->in_data_toggle[devnum][ep]; 1019 else 1020 pid = &priv->out_data_toggle[devnum][ep]; 1021 1022 return chunk_msg(priv, dev, pipe, pid, usb_pipein(pipe), buffer, len); 1023 } 1024 1025 static int _submit_control_msg(struct dwc2_priv *priv, struct usb_device *dev, 1026 unsigned long pipe, void *buffer, int len, 1027 struct devrequest *setup) 1028 { 1029 int devnum = usb_pipedevice(pipe); 1030 int ret, act_len; 1031 u8 pid; 1032 /* For CONTROL endpoint pid should start with DATA1 */ 1033 int status_direction; 1034 1035 if (devnum == priv->root_hub_devnum) { 1036 dev->status = 0; 1037 dev->speed = USB_SPEED_HIGH; 1038 return dwc_otg_submit_rh_msg(priv, dev, pipe, buffer, len, 1039 setup); 1040 } 1041 1042 /* SETUP stage */ 1043 pid = DWC2_HC_PID_SETUP; 1044 do { 1045 ret = chunk_msg(priv, dev, pipe, &pid, 0, setup, 8); 1046 } while (ret == -EAGAIN); 1047 if (ret) 1048 return ret; 1049 1050 /* DATA stage */ 1051 act_len = 0; 1052 if (buffer) { 1053 pid = DWC2_HC_PID_DATA1; 1054 do { 1055 ret = chunk_msg(priv, dev, pipe, &pid, usb_pipein(pipe), 1056 buffer, len); 1057 act_len += dev->act_len; 1058 buffer += dev->act_len; 1059 len -= dev->act_len; 1060 } while (ret == -EAGAIN); 1061 if (ret) 1062 return ret; 1063 status_direction = usb_pipeout(pipe); 1064 } else { 1065 /* No-data CONTROL always ends with an IN transaction */ 1066 status_direction = 1; 1067 } 1068 1069 /* STATUS stage */ 1070 pid = DWC2_HC_PID_DATA1; 1071 do { 1072 ret = chunk_msg(priv, dev, pipe, &pid, status_direction, 1073 priv->status_buffer, 0); 1074 } while (ret == -EAGAIN); 1075 if (ret) 1076 return ret; 1077 1078 dev->act_len = act_len; 1079 1080 return 0; 1081 } 1082 1083 int _submit_int_msg(struct dwc2_priv *priv, struct usb_device *dev, 1084 unsigned long pipe, void *buffer, int len, int interval) 1085 { 1086 unsigned long timeout; 1087 int ret; 1088 1089 /* FIXME: what is interval? */ 1090 1091 timeout = get_timer(0) + USB_TIMEOUT_MS(pipe); 1092 for (;;) { 1093 if (get_timer(0) > timeout) { 1094 printf("Timeout poll on interrupt endpoint\n"); 1095 return -ETIMEDOUT; 1096 } 1097 ret = _submit_bulk_msg(priv, dev, pipe, buffer, len); 1098 if (ret != -EAGAIN) 1099 return ret; 1100 } 1101 } 1102 1103 static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv) 1104 { 1105 struct dwc2_core_regs *regs = priv->regs; 1106 uint32_t snpsid; 1107 int i, j; 1108 1109 snpsid = readl(®s->gsnpsid); 1110 printf("Core Release: %x.%03x\n", snpsid >> 12 & 0xf, snpsid & 0xfff); 1111 1112 if ((snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_2xx && 1113 (snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_3xx) { 1114 printf("SNPSID invalid (not DWC2 OTG device): %08x\n", snpsid); 1115 return -ENODEV; 1116 } 1117 1118 #ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS 1119 priv->ext_vbus = 1; 1120 #else 1121 priv->ext_vbus = 0; 1122 #endif 1123 1124 dwc_otg_core_init(priv); 1125 dwc_otg_core_host_init(dev, regs); 1126 1127 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 1128 DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG | 1129 DWC2_HPRT0_PRTOVRCURRCHNG, 1130 DWC2_HPRT0_PRTRST); 1131 mdelay(50); 1132 clrbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET | 1133 DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG | 1134 DWC2_HPRT0_PRTRST); 1135 1136 for (i = 0; i < MAX_DEVICE; i++) { 1137 for (j = 0; j < MAX_ENDPOINT; j++) { 1138 priv->in_data_toggle[i][j] = DWC2_HC_PID_DATA0; 1139 priv->out_data_toggle[i][j] = DWC2_HC_PID_DATA0; 1140 } 1141 } 1142 1143 /* 1144 * Add a 1 second delay here. This gives the host controller 1145 * a bit time before the comminucation with the USB devices 1146 * is started (the bus is scanned) and fixes the USB detection 1147 * problems with some problematic USB keys. 1148 */ 1149 if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) 1150 mdelay(1000); 1151 1152 return 0; 1153 } 1154 1155 static void dwc2_uninit_common(struct dwc2_core_regs *regs) 1156 { 1157 /* Put everything in reset. */ 1158 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 1159 DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG | 1160 DWC2_HPRT0_PRTOVRCURRCHNG, 1161 DWC2_HPRT0_PRTRST); 1162 } 1163 1164 #ifndef CONFIG_DM_USB 1165 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1166 int len, struct devrequest *setup) 1167 { 1168 return _submit_control_msg(&local, dev, pipe, buffer, len, setup); 1169 } 1170 1171 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1172 int len) 1173 { 1174 return _submit_bulk_msg(&local, dev, pipe, buffer, len); 1175 } 1176 1177 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1178 int len, int interval) 1179 { 1180 return _submit_int_msg(&local, dev, pipe, buffer, len, interval); 1181 } 1182 1183 /* U-Boot USB control interface */ 1184 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) 1185 { 1186 struct dwc2_priv *priv = &local; 1187 1188 memset(priv, '\0', sizeof(*priv)); 1189 priv->root_hub_devnum = 0; 1190 priv->regs = (struct dwc2_core_regs *)CONFIG_USB_DWC2_REG_ADDR; 1191 priv->aligned_buffer = aligned_buffer_addr; 1192 priv->status_buffer = status_buffer_addr; 1193 1194 /* board-dependant init */ 1195 if (board_usb_init(index, USB_INIT_HOST)) 1196 return -1; 1197 1198 return dwc2_init_common(NULL, priv); 1199 } 1200 1201 int usb_lowlevel_stop(int index) 1202 { 1203 dwc2_uninit_common(local.regs); 1204 1205 return 0; 1206 } 1207 #endif 1208 1209 #ifdef CONFIG_DM_USB 1210 static int dwc2_submit_control_msg(struct udevice *dev, struct usb_device *udev, 1211 unsigned long pipe, void *buffer, int length, 1212 struct devrequest *setup) 1213 { 1214 struct dwc2_priv *priv = dev_get_priv(dev); 1215 1216 debug("%s: dev='%s', udev=%p, udev->dev='%s', portnr=%d\n", __func__, 1217 dev->name, udev, udev->dev->name, udev->portnr); 1218 1219 return _submit_control_msg(priv, udev, pipe, buffer, length, setup); 1220 } 1221 1222 static int dwc2_submit_bulk_msg(struct udevice *dev, struct usb_device *udev, 1223 unsigned long pipe, void *buffer, int length) 1224 { 1225 struct dwc2_priv *priv = dev_get_priv(dev); 1226 1227 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1228 1229 return _submit_bulk_msg(priv, udev, pipe, buffer, length); 1230 } 1231 1232 static int dwc2_submit_int_msg(struct udevice *dev, struct usb_device *udev, 1233 unsigned long pipe, void *buffer, int length, 1234 int interval) 1235 { 1236 struct dwc2_priv *priv = dev_get_priv(dev); 1237 1238 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1239 1240 return _submit_int_msg(priv, udev, pipe, buffer, length, interval); 1241 } 1242 1243 static int dwc2_usb_ofdata_to_platdata(struct udevice *dev) 1244 { 1245 struct dwc2_priv *priv = dev_get_priv(dev); 1246 fdt_addr_t addr; 1247 1248 addr = devfdt_get_addr(dev); 1249 if (addr == FDT_ADDR_T_NONE) 1250 return -EINVAL; 1251 priv->regs = (struct dwc2_core_regs *)addr; 1252 1253 priv->oc_disable = dev_read_bool(dev, "disable-over-current"); 1254 priv->hnp_srp_disable = dev_read_bool(dev, "hnp-srp-disable"); 1255 1256 return 0; 1257 } 1258 1259 static int dwc2_usb_probe(struct udevice *dev) 1260 { 1261 struct dwc2_priv *priv = dev_get_priv(dev); 1262 struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev); 1263 1264 bus_priv->desc_before_addr = true; 1265 1266 return dwc2_init_common(dev, priv); 1267 } 1268 1269 static int dwc2_usb_remove(struct udevice *dev) 1270 { 1271 struct dwc2_priv *priv = dev_get_priv(dev); 1272 1273 dwc2_uninit_common(priv->regs); 1274 1275 return 0; 1276 } 1277 1278 struct dm_usb_ops dwc2_usb_ops = { 1279 .control = dwc2_submit_control_msg, 1280 .bulk = dwc2_submit_bulk_msg, 1281 .interrupt = dwc2_submit_int_msg, 1282 }; 1283 1284 static const struct udevice_id dwc2_usb_ids[] = { 1285 { .compatible = "brcm,bcm2835-usb" }, 1286 { .compatible = "snps,dwc2" }, 1287 { } 1288 }; 1289 1290 U_BOOT_DRIVER(usb_dwc2) = { 1291 .name = "dwc2_usb", 1292 .id = UCLASS_USB, 1293 .of_match = dwc2_usb_ids, 1294 .ofdata_to_platdata = dwc2_usb_ofdata_to_platdata, 1295 .probe = dwc2_usb_probe, 1296 .remove = dwc2_usb_remove, 1297 .ops = &dwc2_usb_ops, 1298 .priv_auto_alloc_size = sizeof(struct dwc2_priv), 1299 .flags = DM_FLAG_ALLOC_PRIV_DMA, 1300 }; 1301 #endif 1302