1 /* 2 * Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org> 3 * Copyright (C) 2014 Marek Vasut <marex@denx.de> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <dm.h> 10 #include <errno.h> 11 #include <usb.h> 12 #include <malloc.h> 13 #include <memalign.h> 14 #include <phys2bus.h> 15 #include <usbroothubdes.h> 16 #include <wait_bit.h> 17 #include <asm/io.h> 18 #include <power/regulator.h> 19 20 #include "dwc2.h" 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 /* Use only HC channel 0. */ 25 #define DWC2_HC_CHANNEL 0 26 27 #define DWC2_STATUS_BUF_SIZE 64 28 #define DWC2_DATA_BUF_SIZE (CONFIG_USB_DWC2_BUFFER_SIZE * 1024) 29 30 #define MAX_DEVICE 16 31 #define MAX_ENDPOINT 16 32 33 struct dwc2_priv { 34 #ifdef CONFIG_DM_USB 35 uint8_t aligned_buffer[DWC2_DATA_BUF_SIZE] __aligned(ARCH_DMA_MINALIGN); 36 uint8_t status_buffer[DWC2_STATUS_BUF_SIZE] __aligned(ARCH_DMA_MINALIGN); 37 #ifdef CONFIG_DM_REGULATOR 38 struct udevice *vbus_supply; 39 #endif 40 #else 41 uint8_t *aligned_buffer; 42 uint8_t *status_buffer; 43 #endif 44 u8 in_data_toggle[MAX_DEVICE][MAX_ENDPOINT]; 45 u8 out_data_toggle[MAX_DEVICE][MAX_ENDPOINT]; 46 struct dwc2_core_regs *regs; 47 int root_hub_devnum; 48 bool ext_vbus; 49 /* 50 * The hnp/srp capability must be disabled if the platform 51 * does't support hnp/srp. Otherwise the force mode can't work. 52 */ 53 bool hnp_srp_disable; 54 bool oc_disable; 55 }; 56 57 #ifndef CONFIG_DM_USB 58 /* We need cacheline-aligned buffers for DMA transfers and dcache support */ 59 DEFINE_ALIGN_BUFFER(uint8_t, aligned_buffer_addr, DWC2_DATA_BUF_SIZE, 60 ARCH_DMA_MINALIGN); 61 DEFINE_ALIGN_BUFFER(uint8_t, status_buffer_addr, DWC2_STATUS_BUF_SIZE, 62 ARCH_DMA_MINALIGN); 63 64 static struct dwc2_priv local; 65 #endif 66 67 /* 68 * DWC2 IP interface 69 */ 70 71 /* 72 * Initializes the FSLSPClkSel field of the HCFG register 73 * depending on the PHY type. 74 */ 75 static void init_fslspclksel(struct dwc2_core_regs *regs) 76 { 77 uint32_t phyclk; 78 79 #if (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS) 80 phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */ 81 #else 82 /* High speed PHY running at full speed or high speed */ 83 phyclk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ; 84 #endif 85 86 #ifdef CONFIG_DWC2_ULPI_FS_LS 87 uint32_t hwcfg2 = readl(®s->ghwcfg2); 88 uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >> 89 DWC2_HWCFG2_HS_PHY_TYPE_OFFSET; 90 uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >> 91 DWC2_HWCFG2_FS_PHY_TYPE_OFFSET; 92 93 if (hval == 2 && fval == 1) 94 phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */ 95 #endif 96 97 clrsetbits_le32(®s->host_regs.hcfg, 98 DWC2_HCFG_FSLSPCLKSEL_MASK, 99 phyclk << DWC2_HCFG_FSLSPCLKSEL_OFFSET); 100 } 101 102 /* 103 * Flush a Tx FIFO. 104 * 105 * @param regs Programming view of DWC_otg controller. 106 * @param num Tx FIFO to flush. 107 */ 108 static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num) 109 { 110 int ret; 111 112 writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET), 113 ®s->grstctl); 114 ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_TXFFLSH, 115 false, 1000, false); 116 if (ret) 117 printf("%s: Timeout!\n", __func__); 118 119 /* Wait for 3 PHY Clocks */ 120 udelay(1); 121 } 122 123 /* 124 * Flush Rx FIFO. 125 * 126 * @param regs Programming view of DWC_otg controller. 127 */ 128 static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs) 129 { 130 int ret; 131 132 writel(DWC2_GRSTCTL_RXFFLSH, ®s->grstctl); 133 ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_RXFFLSH, 134 false, 1000, false); 135 if (ret) 136 printf("%s: Timeout!\n", __func__); 137 138 /* Wait for 3 PHY Clocks */ 139 udelay(1); 140 } 141 142 /* 143 * Do core a soft reset of the core. Be careful with this because it 144 * resets all the internal state machines of the core. 145 */ 146 static void dwc_otg_core_reset(struct dwc2_core_regs *regs) 147 { 148 int ret; 149 150 /* Wait for AHB master IDLE state. */ 151 ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_AHBIDLE, 152 true, 1000, false); 153 if (ret) 154 printf("%s: Timeout!\n", __func__); 155 156 /* Core Soft Reset */ 157 writel(DWC2_GRSTCTL_CSFTRST, ®s->grstctl); 158 ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_CSFTRST, 159 false, 1000, false); 160 if (ret) 161 printf("%s: Timeout!\n", __func__); 162 163 /* 164 * Wait for core to come out of reset. 165 * NOTE: This long sleep is _very_ important, otherwise the core will 166 * not stay in host mode after a connector ID change! 167 */ 168 mdelay(100); 169 } 170 171 #if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR) 172 static int dwc_vbus_supply_init(struct udevice *dev) 173 { 174 struct dwc2_priv *priv = dev_get_priv(dev); 175 int ret; 176 177 ret = device_get_supply_regulator(dev, "vbus-supply", 178 &priv->vbus_supply); 179 if (ret) { 180 debug("%s: No vbus supply\n", dev->name); 181 return 0; 182 } 183 184 ret = regulator_set_enable(priv->vbus_supply, true); 185 if (ret) { 186 pr_err("Error enabling vbus supply\n"); 187 return ret; 188 } 189 190 return 0; 191 } 192 193 static int dwc_vbus_supply_exit(struct udevice *dev) 194 { 195 struct dwc2_priv *priv = dev_get_priv(dev); 196 int ret; 197 198 if (priv->vbus_supply) { 199 ret = regulator_set_enable(priv->vbus_supply, false); 200 if (ret) { 201 dev_err(dev, "Error disabling vbus supply\n"); 202 return ret; 203 } 204 } 205 206 return 0; 207 } 208 #else 209 static int dwc_vbus_supply_init(struct udevice *dev) 210 { 211 return 0; 212 } 213 214 #if defined(CONFIG_DM_USB) 215 static int dwc_vbus_supply_exit(struct udevice *dev) 216 { 217 return 0; 218 } 219 #endif 220 #endif 221 222 /* 223 * This function initializes the DWC_otg controller registers for 224 * host mode. 225 * 226 * This function flushes the Tx and Rx FIFOs and it flushes any entries in the 227 * request queues. Host channels are reset to ensure that they are ready for 228 * performing transfers. 229 * 230 * @param dev USB Device (NULL if driver model is not being used) 231 * @param regs Programming view of DWC_otg controller 232 * 233 */ 234 static void dwc_otg_core_host_init(struct udevice *dev, 235 struct dwc2_core_regs *regs) 236 { 237 uint32_t nptxfifosize = 0; 238 uint32_t ptxfifosize = 0; 239 uint32_t hprt0 = 0; 240 int i, ret, num_channels; 241 242 /* Restart the Phy Clock */ 243 writel(0, ®s->pcgcctl); 244 245 /* Initialize Host Configuration Register */ 246 init_fslspclksel(regs); 247 #ifdef CONFIG_DWC2_DFLT_SPEED_FULL 248 setbits_le32(®s->host_regs.hcfg, DWC2_HCFG_FSLSSUPP); 249 #endif 250 251 /* Configure data FIFO sizes */ 252 #ifdef CONFIG_DWC2_ENABLE_DYNAMIC_FIFO 253 if (readl(®s->ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) { 254 /* Rx FIFO */ 255 writel(CONFIG_DWC2_HOST_RX_FIFO_SIZE, ®s->grxfsiz); 256 257 /* Non-periodic Tx FIFO */ 258 nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE << 259 DWC2_FIFOSIZE_DEPTH_OFFSET; 260 nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE << 261 DWC2_FIFOSIZE_STARTADDR_OFFSET; 262 writel(nptxfifosize, ®s->gnptxfsiz); 263 264 /* Periodic Tx FIFO */ 265 ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE << 266 DWC2_FIFOSIZE_DEPTH_OFFSET; 267 ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE + 268 CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) << 269 DWC2_FIFOSIZE_STARTADDR_OFFSET; 270 writel(ptxfifosize, ®s->hptxfsiz); 271 } 272 #endif 273 274 /* Clear Host Set HNP Enable in the OTG Control Register */ 275 clrbits_le32(®s->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN); 276 277 /* Make sure the FIFOs are flushed. */ 278 dwc_otg_flush_tx_fifo(regs, 0x10); /* All Tx FIFOs */ 279 dwc_otg_flush_rx_fifo(regs); 280 281 /* Flush out any leftover queued requests. */ 282 num_channels = readl(®s->ghwcfg2); 283 num_channels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK; 284 num_channels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET; 285 num_channels += 1; 286 287 for (i = 0; i < num_channels; i++) 288 clrsetbits_le32(®s->hc_regs[i].hcchar, 289 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR, 290 DWC2_HCCHAR_CHDIS); 291 292 /* Halt all channels to put them into a known state. */ 293 for (i = 0; i < num_channels; i++) { 294 clrsetbits_le32(®s->hc_regs[i].hcchar, 295 DWC2_HCCHAR_EPDIR, 296 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS); 297 ret = wait_for_bit_le32(®s->hc_regs[i].hcchar, 298 DWC2_HCCHAR_CHEN, false, 1000, false); 299 if (ret) 300 printf("%s: Timeout!\n", __func__); 301 } 302 303 /* Turn on the vbus power. */ 304 if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) { 305 hprt0 = readl(®s->hprt0); 306 hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET); 307 hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG); 308 if (!(hprt0 & DWC2_HPRT0_PRTPWR)) { 309 hprt0 |= DWC2_HPRT0_PRTPWR; 310 writel(hprt0, ®s->hprt0); 311 } 312 } 313 314 if (dev) 315 dwc_vbus_supply_init(dev); 316 } 317 318 /* 319 * This function initializes the DWC_otg controller registers and 320 * prepares the core for device mode or host mode operation. 321 * 322 * @param regs Programming view of the DWC_otg controller 323 */ 324 static void dwc_otg_core_init(struct dwc2_priv *priv) 325 { 326 struct dwc2_core_regs *regs = priv->regs; 327 uint32_t ahbcfg = 0; 328 uint32_t usbcfg = 0; 329 uint8_t brst_sz = CONFIG_DWC2_DMA_BURST_SIZE; 330 331 /* Common Initialization */ 332 usbcfg = readl(®s->gusbcfg); 333 334 /* Program the ULPI External VBUS bit if needed */ 335 if (priv->ext_vbus) { 336 usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV; 337 if (!priv->oc_disable) { 338 usbcfg |= DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR | 339 DWC2_GUSBCFG_INDICATOR_PASSTHROUGH; 340 } 341 } else { 342 usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV; 343 } 344 345 /* Set external TS Dline pulsing */ 346 #ifdef CONFIG_DWC2_TS_DLINE 347 usbcfg |= DWC2_GUSBCFG_TERM_SEL_DL_PULSE; 348 #else 349 usbcfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE; 350 #endif 351 writel(usbcfg, ®s->gusbcfg); 352 353 /* Reset the Controller */ 354 dwc_otg_core_reset(regs); 355 356 /* 357 * This programming sequence needs to happen in FS mode before 358 * any other programming occurs 359 */ 360 #if defined(CONFIG_DWC2_DFLT_SPEED_FULL) && \ 361 (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS) 362 /* If FS mode with FS PHY */ 363 setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_PHYSEL); 364 365 /* Reset after a PHY select */ 366 dwc_otg_core_reset(regs); 367 368 /* 369 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. 370 * Also do this on HNP Dev/Host mode switches (done in dev_init 371 * and host_init). 372 */ 373 if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) 374 init_fslspclksel(regs); 375 376 #ifdef CONFIG_DWC2_I2C_ENABLE 377 /* Program GUSBCFG.OtgUtmifsSel to I2C */ 378 setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL); 379 380 /* Program GI2CCTL.I2CEn */ 381 clrsetbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN | 382 DWC2_GI2CCTL_I2CDEVADDR_MASK, 383 1 << DWC2_GI2CCTL_I2CDEVADDR_OFFSET); 384 setbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN); 385 #endif 386 387 #else 388 /* High speed PHY. */ 389 390 /* 391 * HS PHY parameters. These parameters are preserved during 392 * soft reset so only program the first time. Do a soft reset 393 * immediately after setting phyif. 394 */ 395 usbcfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF); 396 usbcfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET; 397 398 if (usbcfg & DWC2_GUSBCFG_ULPI_UTMI_SEL) { /* ULPI interface */ 399 #ifdef CONFIG_DWC2_PHY_ULPI_DDR 400 usbcfg |= DWC2_GUSBCFG_DDRSEL; 401 #else 402 usbcfg &= ~DWC2_GUSBCFG_DDRSEL; 403 #endif 404 } else { /* UTMI+ interface */ 405 #if (CONFIG_DWC2_UTMI_WIDTH == 16) 406 usbcfg |= DWC2_GUSBCFG_PHYIF; 407 #endif 408 } 409 410 writel(usbcfg, ®s->gusbcfg); 411 412 /* Reset after setting the PHY parameters */ 413 dwc_otg_core_reset(regs); 414 #endif 415 416 usbcfg = readl(®s->gusbcfg); 417 usbcfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M); 418 #ifdef CONFIG_DWC2_ULPI_FS_LS 419 uint32_t hwcfg2 = readl(®s->ghwcfg2); 420 uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >> 421 DWC2_HWCFG2_HS_PHY_TYPE_OFFSET; 422 uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >> 423 DWC2_HWCFG2_FS_PHY_TYPE_OFFSET; 424 if (hval == 2 && fval == 1) { 425 usbcfg |= DWC2_GUSBCFG_ULPI_FSLS; 426 usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M; 427 } 428 #endif 429 if (priv->hnp_srp_disable) 430 usbcfg |= DWC2_GUSBCFG_FORCEHOSTMODE; 431 432 writel(usbcfg, ®s->gusbcfg); 433 434 /* Program the GAHBCFG Register. */ 435 switch (readl(®s->ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) { 436 case DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY: 437 break; 438 case DWC2_HWCFG2_ARCHITECTURE_EXT_DMA: 439 while (brst_sz > 1) { 440 ahbcfg |= ahbcfg + (1 << DWC2_GAHBCFG_HBURSTLEN_OFFSET); 441 ahbcfg &= DWC2_GAHBCFG_HBURSTLEN_MASK; 442 brst_sz >>= 1; 443 } 444 445 #ifdef CONFIG_DWC2_DMA_ENABLE 446 ahbcfg |= DWC2_GAHBCFG_DMAENABLE; 447 #endif 448 break; 449 450 case DWC2_HWCFG2_ARCHITECTURE_INT_DMA: 451 ahbcfg |= DWC2_GAHBCFG_HBURSTLEN_INCR4; 452 #ifdef CONFIG_DWC2_DMA_ENABLE 453 ahbcfg |= DWC2_GAHBCFG_DMAENABLE; 454 #endif 455 break; 456 } 457 458 writel(ahbcfg, ®s->gahbcfg); 459 460 /* Program the capabilities in GUSBCFG Register */ 461 usbcfg = 0; 462 463 if (!priv->hnp_srp_disable) 464 usbcfg |= DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP; 465 #ifdef CONFIG_DWC2_IC_USB_CAP 466 usbcfg |= DWC2_GUSBCFG_IC_USB_CAP; 467 #endif 468 469 setbits_le32(®s->gusbcfg, usbcfg); 470 } 471 472 /* 473 * Prepares a host channel for transferring packets to/from a specific 474 * endpoint. The HCCHARn register is set up with the characteristics specified 475 * in _hc. Host channel interrupts that may need to be serviced while this 476 * transfer is in progress are enabled. 477 * 478 * @param regs Programming view of DWC_otg controller 479 * @param hc Information needed to initialize the host channel 480 */ 481 static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num, 482 struct usb_device *dev, uint8_t dev_addr, uint8_t ep_num, 483 uint8_t ep_is_in, uint8_t ep_type, uint16_t max_packet) 484 { 485 struct dwc2_hc_regs *hc_regs = ®s->hc_regs[hc_num]; 486 uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) | 487 (ep_num << DWC2_HCCHAR_EPNUM_OFFSET) | 488 (ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) | 489 (ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) | 490 (max_packet << DWC2_HCCHAR_MPS_OFFSET); 491 492 if (dev->speed == USB_SPEED_LOW) 493 hcchar |= DWC2_HCCHAR_LSPDDEV; 494 495 /* 496 * Program the HCCHARn register with the endpoint characteristics 497 * for the current transfer. 498 */ 499 writel(hcchar, &hc_regs->hcchar); 500 501 /* Program the HCSPLIT register, default to no SPLIT */ 502 writel(0, &hc_regs->hcsplt); 503 } 504 505 static void dwc_otg_hc_init_split(struct dwc2_hc_regs *hc_regs, 506 uint8_t hub_devnum, uint8_t hub_port) 507 { 508 uint32_t hcsplt = 0; 509 510 hcsplt = DWC2_HCSPLT_SPLTENA; 511 hcsplt |= hub_devnum << DWC2_HCSPLT_HUBADDR_OFFSET; 512 hcsplt |= hub_port << DWC2_HCSPLT_PRTADDR_OFFSET; 513 514 /* Program the HCSPLIT register for SPLITs */ 515 writel(hcsplt, &hc_regs->hcsplt); 516 } 517 518 /* 519 * DWC2 to USB API interface 520 */ 521 /* Direction: In ; Request: Status */ 522 static int dwc_otg_submit_rh_msg_in_status(struct dwc2_core_regs *regs, 523 struct usb_device *dev, void *buffer, 524 int txlen, struct devrequest *cmd) 525 { 526 uint32_t hprt0 = 0; 527 uint32_t port_status = 0; 528 uint32_t port_change = 0; 529 int len = 0; 530 int stat = 0; 531 532 switch (cmd->requesttype & ~USB_DIR_IN) { 533 case 0: 534 *(uint16_t *)buffer = cpu_to_le16(1); 535 len = 2; 536 break; 537 case USB_RECIP_INTERFACE: 538 case USB_RECIP_ENDPOINT: 539 *(uint16_t *)buffer = cpu_to_le16(0); 540 len = 2; 541 break; 542 case USB_TYPE_CLASS: 543 *(uint32_t *)buffer = cpu_to_le32(0); 544 len = 4; 545 break; 546 case USB_RECIP_OTHER | USB_TYPE_CLASS: 547 hprt0 = readl(®s->hprt0); 548 if (hprt0 & DWC2_HPRT0_PRTCONNSTS) 549 port_status |= USB_PORT_STAT_CONNECTION; 550 if (hprt0 & DWC2_HPRT0_PRTENA) 551 port_status |= USB_PORT_STAT_ENABLE; 552 if (hprt0 & DWC2_HPRT0_PRTSUSP) 553 port_status |= USB_PORT_STAT_SUSPEND; 554 if (hprt0 & DWC2_HPRT0_PRTOVRCURRACT) 555 port_status |= USB_PORT_STAT_OVERCURRENT; 556 if (hprt0 & DWC2_HPRT0_PRTRST) 557 port_status |= USB_PORT_STAT_RESET; 558 if (hprt0 & DWC2_HPRT0_PRTPWR) 559 port_status |= USB_PORT_STAT_POWER; 560 561 if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) == DWC2_HPRT0_PRTSPD_LOW) 562 port_status |= USB_PORT_STAT_LOW_SPEED; 563 else if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) == 564 DWC2_HPRT0_PRTSPD_HIGH) 565 port_status |= USB_PORT_STAT_HIGH_SPEED; 566 567 if (hprt0 & DWC2_HPRT0_PRTENCHNG) 568 port_change |= USB_PORT_STAT_C_ENABLE; 569 if (hprt0 & DWC2_HPRT0_PRTCONNDET) 570 port_change |= USB_PORT_STAT_C_CONNECTION; 571 if (hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG) 572 port_change |= USB_PORT_STAT_C_OVERCURRENT; 573 574 *(uint32_t *)buffer = cpu_to_le32(port_status | 575 (port_change << 16)); 576 len = 4; 577 break; 578 default: 579 puts("unsupported root hub command\n"); 580 stat = USB_ST_STALLED; 581 } 582 583 dev->act_len = min(len, txlen); 584 dev->status = stat; 585 586 return stat; 587 } 588 589 /* Direction: In ; Request: Descriptor */ 590 static int dwc_otg_submit_rh_msg_in_descriptor(struct usb_device *dev, 591 void *buffer, int txlen, 592 struct devrequest *cmd) 593 { 594 unsigned char data[32]; 595 uint32_t dsc; 596 int len = 0; 597 int stat = 0; 598 uint16_t wValue = cpu_to_le16(cmd->value); 599 uint16_t wLength = cpu_to_le16(cmd->length); 600 601 switch (cmd->requesttype & ~USB_DIR_IN) { 602 case 0: 603 switch (wValue & 0xff00) { 604 case 0x0100: /* device descriptor */ 605 len = min3(txlen, (int)sizeof(root_hub_dev_des), (int)wLength); 606 memcpy(buffer, root_hub_dev_des, len); 607 break; 608 case 0x0200: /* configuration descriptor */ 609 len = min3(txlen, (int)sizeof(root_hub_config_des), (int)wLength); 610 memcpy(buffer, root_hub_config_des, len); 611 break; 612 case 0x0300: /* string descriptors */ 613 switch (wValue & 0xff) { 614 case 0x00: 615 len = min3(txlen, (int)sizeof(root_hub_str_index0), 616 (int)wLength); 617 memcpy(buffer, root_hub_str_index0, len); 618 break; 619 case 0x01: 620 len = min3(txlen, (int)sizeof(root_hub_str_index1), 621 (int)wLength); 622 memcpy(buffer, root_hub_str_index1, len); 623 break; 624 } 625 break; 626 default: 627 stat = USB_ST_STALLED; 628 } 629 break; 630 631 case USB_TYPE_CLASS: 632 /* Root port config, set 1 port and nothing else. */ 633 dsc = 0x00000001; 634 635 data[0] = 9; /* min length; */ 636 data[1] = 0x29; 637 data[2] = dsc & RH_A_NDP; 638 data[3] = 0; 639 if (dsc & RH_A_PSM) 640 data[3] |= 0x1; 641 if (dsc & RH_A_NOCP) 642 data[3] |= 0x10; 643 else if (dsc & RH_A_OCPM) 644 data[3] |= 0x8; 645 646 /* corresponds to data[4-7] */ 647 data[5] = (dsc & RH_A_POTPGT) >> 24; 648 data[7] = dsc & RH_B_DR; 649 if (data[2] < 7) { 650 data[8] = 0xff; 651 } else { 652 data[0] += 2; 653 data[8] = (dsc & RH_B_DR) >> 8; 654 data[9] = 0xff; 655 data[10] = data[9]; 656 } 657 658 len = min3(txlen, (int)data[0], (int)wLength); 659 memcpy(buffer, data, len); 660 break; 661 default: 662 puts("unsupported root hub command\n"); 663 stat = USB_ST_STALLED; 664 } 665 666 dev->act_len = min(len, txlen); 667 dev->status = stat; 668 669 return stat; 670 } 671 672 /* Direction: In ; Request: Configuration */ 673 static int dwc_otg_submit_rh_msg_in_configuration(struct usb_device *dev, 674 void *buffer, int txlen, 675 struct devrequest *cmd) 676 { 677 int len = 0; 678 int stat = 0; 679 680 switch (cmd->requesttype & ~USB_DIR_IN) { 681 case 0: 682 *(uint8_t *)buffer = 0x01; 683 len = 1; 684 break; 685 default: 686 puts("unsupported root hub command\n"); 687 stat = USB_ST_STALLED; 688 } 689 690 dev->act_len = min(len, txlen); 691 dev->status = stat; 692 693 return stat; 694 } 695 696 /* Direction: In */ 697 static int dwc_otg_submit_rh_msg_in(struct dwc2_priv *priv, 698 struct usb_device *dev, void *buffer, 699 int txlen, struct devrequest *cmd) 700 { 701 switch (cmd->request) { 702 case USB_REQ_GET_STATUS: 703 return dwc_otg_submit_rh_msg_in_status(priv->regs, dev, buffer, 704 txlen, cmd); 705 case USB_REQ_GET_DESCRIPTOR: 706 return dwc_otg_submit_rh_msg_in_descriptor(dev, buffer, 707 txlen, cmd); 708 case USB_REQ_GET_CONFIGURATION: 709 return dwc_otg_submit_rh_msg_in_configuration(dev, buffer, 710 txlen, cmd); 711 default: 712 puts("unsupported root hub command\n"); 713 return USB_ST_STALLED; 714 } 715 } 716 717 /* Direction: Out */ 718 static int dwc_otg_submit_rh_msg_out(struct dwc2_priv *priv, 719 struct usb_device *dev, 720 void *buffer, int txlen, 721 struct devrequest *cmd) 722 { 723 struct dwc2_core_regs *regs = priv->regs; 724 int len = 0; 725 int stat = 0; 726 uint16_t bmrtype_breq = cmd->requesttype | (cmd->request << 8); 727 uint16_t wValue = cpu_to_le16(cmd->value); 728 729 switch (bmrtype_breq & ~USB_DIR_IN) { 730 case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_ENDPOINT: 731 case (USB_REQ_CLEAR_FEATURE << 8) | USB_TYPE_CLASS: 732 break; 733 734 case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS: 735 switch (wValue) { 736 case USB_PORT_FEAT_C_CONNECTION: 737 setbits_le32(®s->hprt0, DWC2_HPRT0_PRTCONNDET); 738 break; 739 } 740 break; 741 742 case (USB_REQ_SET_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS: 743 switch (wValue) { 744 case USB_PORT_FEAT_SUSPEND: 745 break; 746 747 case USB_PORT_FEAT_RESET: 748 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 749 DWC2_HPRT0_PRTCONNDET | 750 DWC2_HPRT0_PRTENCHNG | 751 DWC2_HPRT0_PRTOVRCURRCHNG, 752 DWC2_HPRT0_PRTRST); 753 mdelay(50); 754 clrbits_le32(®s->hprt0, DWC2_HPRT0_PRTRST); 755 break; 756 757 case USB_PORT_FEAT_POWER: 758 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 759 DWC2_HPRT0_PRTCONNDET | 760 DWC2_HPRT0_PRTENCHNG | 761 DWC2_HPRT0_PRTOVRCURRCHNG, 762 DWC2_HPRT0_PRTRST); 763 break; 764 765 case USB_PORT_FEAT_ENABLE: 766 break; 767 } 768 break; 769 case (USB_REQ_SET_ADDRESS << 8): 770 priv->root_hub_devnum = wValue; 771 break; 772 case (USB_REQ_SET_CONFIGURATION << 8): 773 break; 774 default: 775 puts("unsupported root hub command\n"); 776 stat = USB_ST_STALLED; 777 } 778 779 len = min(len, txlen); 780 781 dev->act_len = len; 782 dev->status = stat; 783 784 return stat; 785 } 786 787 static int dwc_otg_submit_rh_msg(struct dwc2_priv *priv, struct usb_device *dev, 788 unsigned long pipe, void *buffer, int txlen, 789 struct devrequest *cmd) 790 { 791 int stat = 0; 792 793 if (usb_pipeint(pipe)) { 794 puts("Root-Hub submit IRQ: NOT implemented\n"); 795 return 0; 796 } 797 798 if (cmd->requesttype & USB_DIR_IN) 799 stat = dwc_otg_submit_rh_msg_in(priv, dev, buffer, txlen, cmd); 800 else 801 stat = dwc_otg_submit_rh_msg_out(priv, dev, buffer, txlen, cmd); 802 803 mdelay(1); 804 805 return stat; 806 } 807 808 int wait_for_chhltd(struct dwc2_hc_regs *hc_regs, uint32_t *sub, u8 *toggle) 809 { 810 int ret; 811 uint32_t hcint, hctsiz; 812 813 ret = wait_for_bit_le32(&hc_regs->hcint, DWC2_HCINT_CHHLTD, true, 814 2000, false); 815 if (ret) 816 return ret; 817 818 hcint = readl(&hc_regs->hcint); 819 hctsiz = readl(&hc_regs->hctsiz); 820 *sub = (hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK) >> 821 DWC2_HCTSIZ_XFERSIZE_OFFSET; 822 *toggle = (hctsiz & DWC2_HCTSIZ_PID_MASK) >> DWC2_HCTSIZ_PID_OFFSET; 823 824 debug("%s: HCINT=%08x sub=%u toggle=%d\n", __func__, hcint, *sub, 825 *toggle); 826 827 if (hcint & DWC2_HCINT_XFERCOMP) 828 return 0; 829 830 if (hcint & (DWC2_HCINT_NAK | DWC2_HCINT_FRMOVRUN)) 831 return -EAGAIN; 832 833 debug("%s: Error (HCINT=%08x)\n", __func__, hcint); 834 return -EINVAL; 835 } 836 837 static int dwc2_eptype[] = { 838 DWC2_HCCHAR_EPTYPE_ISOC, 839 DWC2_HCCHAR_EPTYPE_INTR, 840 DWC2_HCCHAR_EPTYPE_CONTROL, 841 DWC2_HCCHAR_EPTYPE_BULK, 842 }; 843 844 static int transfer_chunk(struct dwc2_hc_regs *hc_regs, void *aligned_buffer, 845 u8 *pid, int in, void *buffer, int num_packets, 846 int xfer_len, int *actual_len, int odd_frame) 847 { 848 int ret = 0; 849 uint32_t sub; 850 851 debug("%s: chunk: pid %d xfer_len %u pkts %u\n", __func__, 852 *pid, xfer_len, num_packets); 853 854 writel((xfer_len << DWC2_HCTSIZ_XFERSIZE_OFFSET) | 855 (num_packets << DWC2_HCTSIZ_PKTCNT_OFFSET) | 856 (*pid << DWC2_HCTSIZ_PID_OFFSET), 857 &hc_regs->hctsiz); 858 859 if (xfer_len) { 860 if (in) { 861 invalidate_dcache_range( 862 (uintptr_t)aligned_buffer, 863 (uintptr_t)aligned_buffer + 864 roundup(xfer_len, ARCH_DMA_MINALIGN)); 865 } else { 866 memcpy(aligned_buffer, buffer, xfer_len); 867 flush_dcache_range( 868 (uintptr_t)aligned_buffer, 869 (uintptr_t)aligned_buffer + 870 roundup(xfer_len, ARCH_DMA_MINALIGN)); 871 } 872 } 873 874 writel(phys_to_bus((unsigned long)aligned_buffer), &hc_regs->hcdma); 875 876 /* Clear old interrupt conditions for this host channel. */ 877 writel(0x3fff, &hc_regs->hcint); 878 879 /* Set host channel enable after all other setup is complete. */ 880 clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK | 881 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS | 882 DWC2_HCCHAR_ODDFRM, 883 (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | 884 (odd_frame << DWC2_HCCHAR_ODDFRM_OFFSET) | 885 DWC2_HCCHAR_CHEN); 886 887 ret = wait_for_chhltd(hc_regs, &sub, pid); 888 if (ret < 0) 889 return ret; 890 891 if (in) { 892 xfer_len -= sub; 893 894 invalidate_dcache_range((unsigned long)aligned_buffer, 895 (unsigned long)aligned_buffer + 896 roundup(xfer_len, ARCH_DMA_MINALIGN)); 897 898 memcpy(buffer, aligned_buffer, xfer_len); 899 } 900 *actual_len = xfer_len; 901 902 return ret; 903 } 904 905 int chunk_msg(struct dwc2_priv *priv, struct usb_device *dev, 906 unsigned long pipe, u8 *pid, int in, void *buffer, int len) 907 { 908 struct dwc2_core_regs *regs = priv->regs; 909 struct dwc2_hc_regs *hc_regs = ®s->hc_regs[DWC2_HC_CHANNEL]; 910 struct dwc2_host_regs *host_regs = ®s->host_regs; 911 int devnum = usb_pipedevice(pipe); 912 int ep = usb_pipeendpoint(pipe); 913 int max = usb_maxpacket(dev, pipe); 914 int eptype = dwc2_eptype[usb_pipetype(pipe)]; 915 int done = 0; 916 int ret = 0; 917 int do_split = 0; 918 int complete_split = 0; 919 uint32_t xfer_len; 920 uint32_t num_packets; 921 int stop_transfer = 0; 922 uint32_t max_xfer_len; 923 int ssplit_frame_num = 0; 924 925 debug("%s: msg: pipe %lx pid %d in %d len %d\n", __func__, pipe, *pid, 926 in, len); 927 928 max_xfer_len = CONFIG_DWC2_MAX_PACKET_COUNT * max; 929 if (max_xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE) 930 max_xfer_len = CONFIG_DWC2_MAX_TRANSFER_SIZE; 931 if (max_xfer_len > DWC2_DATA_BUF_SIZE) 932 max_xfer_len = DWC2_DATA_BUF_SIZE; 933 934 /* Make sure that max_xfer_len is a multiple of max packet size. */ 935 num_packets = max_xfer_len / max; 936 max_xfer_len = num_packets * max; 937 938 /* Initialize channel */ 939 dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, dev, devnum, ep, in, 940 eptype, max); 941 942 /* Check if the target is a FS/LS device behind a HS hub */ 943 if (dev->speed != USB_SPEED_HIGH) { 944 uint8_t hub_addr; 945 uint8_t hub_port; 946 uint32_t hprt0 = readl(®s->hprt0); 947 if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) == 948 DWC2_HPRT0_PRTSPD_HIGH) { 949 usb_find_usb2_hub_address_port(dev, &hub_addr, 950 &hub_port); 951 dwc_otg_hc_init_split(hc_regs, hub_addr, hub_port); 952 953 do_split = 1; 954 num_packets = 1; 955 max_xfer_len = max; 956 } 957 } 958 959 do { 960 int actual_len = 0; 961 uint32_t hcint; 962 int odd_frame = 0; 963 xfer_len = len - done; 964 965 if (xfer_len > max_xfer_len) 966 xfer_len = max_xfer_len; 967 else if (xfer_len > max) 968 num_packets = (xfer_len + max - 1) / max; 969 else 970 num_packets = 1; 971 972 if (complete_split) 973 setbits_le32(&hc_regs->hcsplt, DWC2_HCSPLT_COMPSPLT); 974 else if (do_split) 975 clrbits_le32(&hc_regs->hcsplt, DWC2_HCSPLT_COMPSPLT); 976 977 if (eptype == DWC2_HCCHAR_EPTYPE_INTR) { 978 int uframe_num = readl(&host_regs->hfnum); 979 if (!(uframe_num & 0x1)) 980 odd_frame = 1; 981 } 982 983 ret = transfer_chunk(hc_regs, priv->aligned_buffer, pid, 984 in, (char *)buffer + done, num_packets, 985 xfer_len, &actual_len, odd_frame); 986 987 hcint = readl(&hc_regs->hcint); 988 if (complete_split) { 989 stop_transfer = 0; 990 if (hcint & DWC2_HCINT_NYET) { 991 ret = 0; 992 int frame_num = DWC2_HFNUM_MAX_FRNUM & 993 readl(&host_regs->hfnum); 994 if (((frame_num - ssplit_frame_num) & 995 DWC2_HFNUM_MAX_FRNUM) > 4) 996 ret = -EAGAIN; 997 } else 998 complete_split = 0; 999 } else if (do_split) { 1000 if (hcint & DWC2_HCINT_ACK) { 1001 ssplit_frame_num = DWC2_HFNUM_MAX_FRNUM & 1002 readl(&host_regs->hfnum); 1003 ret = 0; 1004 complete_split = 1; 1005 } 1006 } 1007 1008 if (ret) 1009 break; 1010 1011 if (actual_len < xfer_len) 1012 stop_transfer = 1; 1013 1014 done += actual_len; 1015 1016 /* Transactions are done when when either all data is transferred or 1017 * there is a short transfer. In case of a SPLIT make sure the CSPLIT 1018 * is executed. 1019 */ 1020 } while (((done < len) && !stop_transfer) || complete_split); 1021 1022 writel(0, &hc_regs->hcintmsk); 1023 writel(0xFFFFFFFF, &hc_regs->hcint); 1024 1025 dev->status = 0; 1026 dev->act_len = done; 1027 1028 return ret; 1029 } 1030 1031 /* U-Boot USB transmission interface */ 1032 int _submit_bulk_msg(struct dwc2_priv *priv, struct usb_device *dev, 1033 unsigned long pipe, void *buffer, int len) 1034 { 1035 int devnum = usb_pipedevice(pipe); 1036 int ep = usb_pipeendpoint(pipe); 1037 u8* pid; 1038 1039 if ((devnum >= MAX_DEVICE) || (devnum == priv->root_hub_devnum)) { 1040 dev->status = 0; 1041 return -EINVAL; 1042 } 1043 1044 if (usb_pipein(pipe)) 1045 pid = &priv->in_data_toggle[devnum][ep]; 1046 else 1047 pid = &priv->out_data_toggle[devnum][ep]; 1048 1049 return chunk_msg(priv, dev, pipe, pid, usb_pipein(pipe), buffer, len); 1050 } 1051 1052 static int _submit_control_msg(struct dwc2_priv *priv, struct usb_device *dev, 1053 unsigned long pipe, void *buffer, int len, 1054 struct devrequest *setup) 1055 { 1056 int devnum = usb_pipedevice(pipe); 1057 int ret, act_len; 1058 u8 pid; 1059 /* For CONTROL endpoint pid should start with DATA1 */ 1060 int status_direction; 1061 1062 if (devnum == priv->root_hub_devnum) { 1063 dev->status = 0; 1064 dev->speed = USB_SPEED_HIGH; 1065 return dwc_otg_submit_rh_msg(priv, dev, pipe, buffer, len, 1066 setup); 1067 } 1068 1069 /* SETUP stage */ 1070 pid = DWC2_HC_PID_SETUP; 1071 do { 1072 ret = chunk_msg(priv, dev, pipe, &pid, 0, setup, 8); 1073 } while (ret == -EAGAIN); 1074 if (ret) 1075 return ret; 1076 1077 /* DATA stage */ 1078 act_len = 0; 1079 if (buffer) { 1080 pid = DWC2_HC_PID_DATA1; 1081 do { 1082 ret = chunk_msg(priv, dev, pipe, &pid, usb_pipein(pipe), 1083 buffer, len); 1084 act_len += dev->act_len; 1085 buffer += dev->act_len; 1086 len -= dev->act_len; 1087 } while (ret == -EAGAIN); 1088 if (ret) 1089 return ret; 1090 status_direction = usb_pipeout(pipe); 1091 } else { 1092 /* No-data CONTROL always ends with an IN transaction */ 1093 status_direction = 1; 1094 } 1095 1096 /* STATUS stage */ 1097 pid = DWC2_HC_PID_DATA1; 1098 do { 1099 ret = chunk_msg(priv, dev, pipe, &pid, status_direction, 1100 priv->status_buffer, 0); 1101 } while (ret == -EAGAIN); 1102 if (ret) 1103 return ret; 1104 1105 dev->act_len = act_len; 1106 1107 return 0; 1108 } 1109 1110 int _submit_int_msg(struct dwc2_priv *priv, struct usb_device *dev, 1111 unsigned long pipe, void *buffer, int len, int interval) 1112 { 1113 unsigned long timeout; 1114 int ret; 1115 1116 /* FIXME: what is interval? */ 1117 1118 timeout = get_timer(0) + USB_TIMEOUT_MS(pipe); 1119 for (;;) { 1120 if (get_timer(0) > timeout) { 1121 printf("Timeout poll on interrupt endpoint\n"); 1122 return -ETIMEDOUT; 1123 } 1124 ret = _submit_bulk_msg(priv, dev, pipe, buffer, len); 1125 if (ret != -EAGAIN) 1126 return ret; 1127 } 1128 } 1129 1130 static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv) 1131 { 1132 struct dwc2_core_regs *regs = priv->regs; 1133 uint32_t snpsid; 1134 int i, j; 1135 1136 snpsid = readl(®s->gsnpsid); 1137 printf("Core Release: %x.%03x\n", snpsid >> 12 & 0xf, snpsid & 0xfff); 1138 1139 if ((snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_2xx && 1140 (snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_3xx) { 1141 printf("SNPSID invalid (not DWC2 OTG device): %08x\n", snpsid); 1142 return -ENODEV; 1143 } 1144 1145 #ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS 1146 priv->ext_vbus = 1; 1147 #else 1148 priv->ext_vbus = 0; 1149 #endif 1150 1151 dwc_otg_core_init(priv); 1152 dwc_otg_core_host_init(dev, regs); 1153 1154 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 1155 DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG | 1156 DWC2_HPRT0_PRTOVRCURRCHNG, 1157 DWC2_HPRT0_PRTRST); 1158 mdelay(50); 1159 clrbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET | 1160 DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG | 1161 DWC2_HPRT0_PRTRST); 1162 1163 for (i = 0; i < MAX_DEVICE; i++) { 1164 for (j = 0; j < MAX_ENDPOINT; j++) { 1165 priv->in_data_toggle[i][j] = DWC2_HC_PID_DATA0; 1166 priv->out_data_toggle[i][j] = DWC2_HC_PID_DATA0; 1167 } 1168 } 1169 1170 /* 1171 * Add a 1 second delay here. This gives the host controller 1172 * a bit time before the comminucation with the USB devices 1173 * is started (the bus is scanned) and fixes the USB detection 1174 * problems with some problematic USB keys. 1175 */ 1176 if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) 1177 mdelay(1000); 1178 1179 return 0; 1180 } 1181 1182 static void dwc2_uninit_common(struct dwc2_core_regs *regs) 1183 { 1184 /* Put everything in reset. */ 1185 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 1186 DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG | 1187 DWC2_HPRT0_PRTOVRCURRCHNG, 1188 DWC2_HPRT0_PRTRST); 1189 } 1190 1191 #ifndef CONFIG_DM_USB 1192 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1193 int len, struct devrequest *setup) 1194 { 1195 return _submit_control_msg(&local, dev, pipe, buffer, len, setup); 1196 } 1197 1198 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1199 int len) 1200 { 1201 return _submit_bulk_msg(&local, dev, pipe, buffer, len); 1202 } 1203 1204 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1205 int len, int interval) 1206 { 1207 return _submit_int_msg(&local, dev, pipe, buffer, len, interval); 1208 } 1209 1210 /* U-Boot USB control interface */ 1211 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) 1212 { 1213 struct dwc2_priv *priv = &local; 1214 1215 memset(priv, '\0', sizeof(*priv)); 1216 priv->root_hub_devnum = 0; 1217 priv->regs = (struct dwc2_core_regs *)CONFIG_USB_DWC2_REG_ADDR; 1218 priv->aligned_buffer = aligned_buffer_addr; 1219 priv->status_buffer = status_buffer_addr; 1220 1221 /* board-dependant init */ 1222 if (board_usb_init(index, USB_INIT_HOST)) 1223 return -1; 1224 1225 return dwc2_init_common(NULL, priv); 1226 } 1227 1228 int usb_lowlevel_stop(int index) 1229 { 1230 dwc2_uninit_common(local.regs); 1231 1232 return 0; 1233 } 1234 #endif 1235 1236 #ifdef CONFIG_DM_USB 1237 static int dwc2_submit_control_msg(struct udevice *dev, struct usb_device *udev, 1238 unsigned long pipe, void *buffer, int length, 1239 struct devrequest *setup) 1240 { 1241 struct dwc2_priv *priv = dev_get_priv(dev); 1242 1243 debug("%s: dev='%s', udev=%p, udev->dev='%s', portnr=%d\n", __func__, 1244 dev->name, udev, udev->dev->name, udev->portnr); 1245 1246 return _submit_control_msg(priv, udev, pipe, buffer, length, setup); 1247 } 1248 1249 static int dwc2_submit_bulk_msg(struct udevice *dev, struct usb_device *udev, 1250 unsigned long pipe, void *buffer, int length) 1251 { 1252 struct dwc2_priv *priv = dev_get_priv(dev); 1253 1254 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1255 1256 return _submit_bulk_msg(priv, udev, pipe, buffer, length); 1257 } 1258 1259 static int dwc2_submit_int_msg(struct udevice *dev, struct usb_device *udev, 1260 unsigned long pipe, void *buffer, int length, 1261 int interval) 1262 { 1263 struct dwc2_priv *priv = dev_get_priv(dev); 1264 1265 debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev); 1266 1267 return _submit_int_msg(priv, udev, pipe, buffer, length, interval); 1268 } 1269 1270 static int dwc2_usb_ofdata_to_platdata(struct udevice *dev) 1271 { 1272 struct dwc2_priv *priv = dev_get_priv(dev); 1273 fdt_addr_t addr; 1274 1275 addr = dev_read_addr(dev); 1276 if (addr == FDT_ADDR_T_NONE) 1277 return -EINVAL; 1278 priv->regs = (struct dwc2_core_regs *)addr; 1279 1280 priv->oc_disable = dev_read_bool(dev, "disable-over-current"); 1281 priv->hnp_srp_disable = dev_read_bool(dev, "hnp-srp-disable"); 1282 1283 return 0; 1284 } 1285 1286 static int dwc2_usb_probe(struct udevice *dev) 1287 { 1288 struct dwc2_priv *priv = dev_get_priv(dev); 1289 struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev); 1290 1291 bus_priv->desc_before_addr = true; 1292 1293 return dwc2_init_common(dev, priv); 1294 } 1295 1296 static int dwc2_usb_remove(struct udevice *dev) 1297 { 1298 struct dwc2_priv *priv = dev_get_priv(dev); 1299 int ret; 1300 1301 ret = dwc_vbus_supply_exit(dev); 1302 if (ret) 1303 return ret; 1304 1305 dwc2_uninit_common(priv->regs); 1306 1307 return 0; 1308 } 1309 1310 struct dm_usb_ops dwc2_usb_ops = { 1311 .control = dwc2_submit_control_msg, 1312 .bulk = dwc2_submit_bulk_msg, 1313 .interrupt = dwc2_submit_int_msg, 1314 }; 1315 1316 static const struct udevice_id dwc2_usb_ids[] = { 1317 { .compatible = "brcm,bcm2835-usb" }, 1318 { .compatible = "snps,dwc2" }, 1319 { } 1320 }; 1321 1322 U_BOOT_DRIVER(usb_dwc2) = { 1323 .name = "dwc2_usb", 1324 .id = UCLASS_USB, 1325 .of_match = dwc2_usb_ids, 1326 .ofdata_to_platdata = dwc2_usb_ofdata_to_platdata, 1327 .probe = dwc2_usb_probe, 1328 .remove = dwc2_usb_remove, 1329 .ops = &dwc2_usb_ops, 1330 .priv_auto_alloc_size = sizeof(struct dwc2_priv), 1331 .flags = DM_FLAG_ALLOC_PRIV_DMA, 1332 }; 1333 #endif 1334