1 /* 2 * Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org> 3 * Copyright (C) 2014 Marek Vasut <marex@denx.de> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <errno.h> 10 #include <usb.h> 11 #include <malloc.h> 12 #include <usbroothubdes.h> 13 #include <asm/io.h> 14 15 #include "dwc2.h" 16 17 /* Use only HC channel 0. */ 18 #define DWC2_HC_CHANNEL 0 19 20 #define DWC2_STATUS_BUF_SIZE 64 21 #define DWC2_DATA_BUF_SIZE (64 * 1024) 22 23 /* We need doubleword-aligned buffers for DMA transfers */ 24 DEFINE_ALIGN_BUFFER(uint8_t, aligned_buffer, DWC2_DATA_BUF_SIZE, 8); 25 DEFINE_ALIGN_BUFFER(uint8_t, status_buffer, DWC2_STATUS_BUF_SIZE, 8); 26 27 #define MAX_DEVICE 16 28 #define MAX_ENDPOINT 16 29 static int bulk_data_toggle[MAX_DEVICE][MAX_ENDPOINT]; 30 static int control_data_toggle[MAX_DEVICE][MAX_ENDPOINT]; 31 32 static int root_hub_devnum; 33 34 static struct dwc2_core_regs *regs = 35 (struct dwc2_core_regs *)CONFIG_USB_DWC2_REG_ADDR; 36 37 /* 38 * DWC2 IP interface 39 */ 40 static int wait_for_bit(void *reg, const uint32_t mask, bool set) 41 { 42 unsigned int timeout = 1000000; 43 uint32_t val; 44 45 while (--timeout) { 46 val = readl(reg); 47 if (!set) 48 val = ~val; 49 50 if ((val & mask) == mask) 51 return 0; 52 53 udelay(1); 54 } 55 56 debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n", 57 __func__, reg, mask, set); 58 59 return -ETIMEDOUT; 60 } 61 62 /* 63 * Initializes the FSLSPClkSel field of the HCFG register 64 * depending on the PHY type. 65 */ 66 static void init_fslspclksel(struct dwc2_core_regs *regs) 67 { 68 uint32_t phyclk; 69 70 #if (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS) 71 phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */ 72 #else 73 /* High speed PHY running at full speed or high speed */ 74 phyclk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ; 75 #endif 76 77 #ifdef CONFIG_DWC2_ULPI_FS_LS 78 uint32_t hwcfg2 = readl(®s->ghwcfg2); 79 uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >> 80 DWC2_HWCFG2_HS_PHY_TYPE_OFFSET; 81 uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >> 82 DWC2_HWCFG2_FS_PHY_TYPE_OFFSET; 83 84 if (hval == 2 && fval == 1) 85 phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */ 86 #endif 87 88 clrsetbits_le32(®s->host_regs.hcfg, 89 DWC2_HCFG_FSLSPCLKSEL_MASK, 90 phyclk << DWC2_HCFG_FSLSPCLKSEL_OFFSET); 91 } 92 93 /* 94 * Flush a Tx FIFO. 95 * 96 * @param regs Programming view of DWC_otg controller. 97 * @param num Tx FIFO to flush. 98 */ 99 static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num) 100 { 101 int ret; 102 103 writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET), 104 ®s->grstctl); 105 ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_TXFFLSH, 0); 106 if (ret) 107 printf("%s: Timeout!\n", __func__); 108 109 /* Wait for 3 PHY Clocks */ 110 udelay(1); 111 } 112 113 /* 114 * Flush Rx FIFO. 115 * 116 * @param regs Programming view of DWC_otg controller. 117 */ 118 static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs) 119 { 120 int ret; 121 122 writel(DWC2_GRSTCTL_RXFFLSH, ®s->grstctl); 123 ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_RXFFLSH, 0); 124 if (ret) 125 printf("%s: Timeout!\n", __func__); 126 127 /* Wait for 3 PHY Clocks */ 128 udelay(1); 129 } 130 131 /* 132 * Do core a soft reset of the core. Be careful with this because it 133 * resets all the internal state machines of the core. 134 */ 135 static void dwc_otg_core_reset(struct dwc2_core_regs *regs) 136 { 137 int ret; 138 139 /* Wait for AHB master IDLE state. */ 140 ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_AHBIDLE, 1); 141 if (ret) 142 printf("%s: Timeout!\n", __func__); 143 144 /* Core Soft Reset */ 145 writel(DWC2_GRSTCTL_CSFTRST, ®s->grstctl); 146 ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_CSFTRST, 0); 147 if (ret) 148 printf("%s: Timeout!\n", __func__); 149 150 /* 151 * Wait for core to come out of reset. 152 * NOTE: This long sleep is _very_ important, otherwise the core will 153 * not stay in host mode after a connector ID change! 154 */ 155 mdelay(100); 156 } 157 158 /* 159 * This function initializes the DWC_otg controller registers for 160 * host mode. 161 * 162 * This function flushes the Tx and Rx FIFOs and it flushes any entries in the 163 * request queues. Host channels are reset to ensure that they are ready for 164 * performing transfers. 165 * 166 * @param regs Programming view of DWC_otg controller 167 * 168 */ 169 static void dwc_otg_core_host_init(struct dwc2_core_regs *regs) 170 { 171 uint32_t nptxfifosize = 0; 172 uint32_t ptxfifosize = 0; 173 uint32_t hprt0 = 0; 174 int i, ret, num_channels; 175 176 /* Restart the Phy Clock */ 177 writel(0, ®s->pcgcctl); 178 179 /* Initialize Host Configuration Register */ 180 init_fslspclksel(regs); 181 #ifdef CONFIG_DWC2_DFLT_SPEED_FULL 182 setbits_le32(®s->host_regs.hcfg, DWC2_HCFG_FSLSSUPP); 183 #endif 184 185 /* Configure data FIFO sizes */ 186 #ifdef CONFIG_DWC2_ENABLE_DYNAMIC_FIFO 187 if (readl(®s->ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) { 188 /* Rx FIFO */ 189 writel(CONFIG_DWC2_HOST_RX_FIFO_SIZE, ®s->grxfsiz); 190 191 /* Non-periodic Tx FIFO */ 192 nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE << 193 DWC2_FIFOSIZE_DEPTH_OFFSET; 194 nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE << 195 DWC2_FIFOSIZE_STARTADDR_OFFSET; 196 writel(nptxfifosize, ®s->gnptxfsiz); 197 198 /* Periodic Tx FIFO */ 199 ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE << 200 DWC2_FIFOSIZE_DEPTH_OFFSET; 201 ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE + 202 CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) << 203 DWC2_FIFOSIZE_STARTADDR_OFFSET; 204 writel(ptxfifosize, ®s->hptxfsiz); 205 } 206 #endif 207 208 /* Clear Host Set HNP Enable in the OTG Control Register */ 209 clrbits_le32(®s->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN); 210 211 /* Make sure the FIFOs are flushed. */ 212 dwc_otg_flush_tx_fifo(regs, 0x10); /* All Tx FIFOs */ 213 dwc_otg_flush_rx_fifo(regs); 214 215 /* Flush out any leftover queued requests. */ 216 num_channels = readl(®s->ghwcfg2); 217 num_channels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK; 218 num_channels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET; 219 num_channels += 1; 220 221 for (i = 0; i < num_channels; i++) 222 clrsetbits_le32(®s->hc_regs[i].hcchar, 223 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR, 224 DWC2_HCCHAR_CHDIS); 225 226 /* Halt all channels to put them into a known state. */ 227 for (i = 0; i < num_channels; i++) { 228 clrsetbits_le32(®s->hc_regs[i].hcchar, 229 DWC2_HCCHAR_EPDIR, 230 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS); 231 ret = wait_for_bit(®s->hc_regs[i].hcchar, 232 DWC2_HCCHAR_CHEN, 0); 233 if (ret) 234 printf("%s: Timeout!\n", __func__); 235 } 236 237 /* Turn on the vbus power. */ 238 if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) { 239 hprt0 = readl(®s->hprt0); 240 hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET); 241 hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG); 242 if (!(hprt0 & DWC2_HPRT0_PRTPWR)) { 243 hprt0 |= DWC2_HPRT0_PRTPWR; 244 writel(hprt0, ®s->hprt0); 245 } 246 } 247 } 248 249 /* 250 * This function initializes the DWC_otg controller registers and 251 * prepares the core for device mode or host mode operation. 252 * 253 * @param regs Programming view of the DWC_otg controller 254 */ 255 static void dwc_otg_core_init(struct dwc2_core_regs *regs) 256 { 257 uint32_t ahbcfg = 0; 258 uint32_t usbcfg = 0; 259 uint8_t brst_sz = CONFIG_DWC2_DMA_BURST_SIZE; 260 261 /* Common Initialization */ 262 usbcfg = readl(®s->gusbcfg); 263 264 /* Program the ULPI External VBUS bit if needed */ 265 #ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS 266 usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV; 267 #else 268 usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV; 269 #endif 270 271 /* Set external TS Dline pulsing */ 272 #ifdef CONFIG_DWC2_TS_DLINE 273 usbcfg |= DWC2_GUSBCFG_TERM_SEL_DL_PULSE; 274 #else 275 usbcfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE; 276 #endif 277 writel(usbcfg, ®s->gusbcfg); 278 279 /* Reset the Controller */ 280 dwc_otg_core_reset(regs); 281 282 /* 283 * This programming sequence needs to happen in FS mode before 284 * any other programming occurs 285 */ 286 #if defined(CONFIG_DWC2_DFLT_SPEED_FULL) && \ 287 (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS) 288 /* If FS mode with FS PHY */ 289 setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_PHYSEL); 290 291 /* Reset after a PHY select */ 292 dwc_otg_core_reset(regs); 293 294 /* 295 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. 296 * Also do this on HNP Dev/Host mode switches (done in dev_init 297 * and host_init). 298 */ 299 if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) 300 init_fslspclksel(regs); 301 302 #ifdef CONFIG_DWC2_I2C_ENABLE 303 /* Program GUSBCFG.OtgUtmifsSel to I2C */ 304 setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL); 305 306 /* Program GI2CCTL.I2CEn */ 307 clrsetbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN | 308 DWC2_GI2CCTL_I2CDEVADDR_MASK, 309 1 << DWC2_GI2CCTL_I2CDEVADDR_OFFSET); 310 setbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN); 311 #endif 312 313 #else 314 /* High speed PHY. */ 315 316 /* 317 * HS PHY parameters. These parameters are preserved during 318 * soft reset so only program the first time. Do a soft reset 319 * immediately after setting phyif. 320 */ 321 usbcfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF); 322 usbcfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET; 323 324 if (usbcfg & DWC2_GUSBCFG_ULPI_UTMI_SEL) { /* ULPI interface */ 325 #ifdef CONFIG_DWC2_PHY_ULPI_DDR 326 usbcfg |= DWC2_GUSBCFG_DDRSEL; 327 #else 328 usbcfg &= ~DWC2_GUSBCFG_DDRSEL; 329 #endif 330 } else { /* UTMI+ interface */ 331 #if (CONFIG_DWC2_UTMI_PHY_WIDTH == 16) 332 usbcfg |= DWC2_GUSBCFG_PHYIF; 333 #endif 334 } 335 336 writel(usbcfg, ®s->gusbcfg); 337 338 /* Reset after setting the PHY parameters */ 339 dwc_otg_core_reset(regs); 340 #endif 341 342 usbcfg = readl(®s->gusbcfg); 343 usbcfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M); 344 #ifdef CONFIG_DWC2_ULPI_FS_LS 345 uint32_t hwcfg2 = readl(®s->ghwcfg2); 346 uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >> 347 DWC2_HWCFG2_HS_PHY_TYPE_OFFSET; 348 uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >> 349 DWC2_HWCFG2_FS_PHY_TYPE_OFFSET; 350 if (hval == 2 && fval == 1) { 351 usbcfg |= DWC2_GUSBCFG_ULPI_FSLS; 352 usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M; 353 } 354 #endif 355 writel(usbcfg, ®s->gusbcfg); 356 357 /* Program the GAHBCFG Register. */ 358 switch (readl(®s->ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) { 359 case DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY: 360 break; 361 case DWC2_HWCFG2_ARCHITECTURE_EXT_DMA: 362 while (brst_sz > 1) { 363 ahbcfg |= ahbcfg + (1 << DWC2_GAHBCFG_HBURSTLEN_OFFSET); 364 ahbcfg &= DWC2_GAHBCFG_HBURSTLEN_MASK; 365 brst_sz >>= 1; 366 } 367 368 #ifdef CONFIG_DWC2_DMA_ENABLE 369 ahbcfg |= DWC2_GAHBCFG_DMAENABLE; 370 #endif 371 break; 372 373 case DWC2_HWCFG2_ARCHITECTURE_INT_DMA: 374 ahbcfg |= DWC2_GAHBCFG_HBURSTLEN_INCR4; 375 #ifdef CONFIG_DWC2_DMA_ENABLE 376 ahbcfg |= DWC2_GAHBCFG_DMAENABLE; 377 #endif 378 break; 379 } 380 381 writel(ahbcfg, ®s->gahbcfg); 382 383 /* Program the GUSBCFG register for HNP/SRP. */ 384 setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP); 385 386 #ifdef CONFIG_DWC2_IC_USB_CAP 387 setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_IC_USB_CAP); 388 #endif 389 } 390 391 /* 392 * Prepares a host channel for transferring packets to/from a specific 393 * endpoint. The HCCHARn register is set up with the characteristics specified 394 * in _hc. Host channel interrupts that may need to be serviced while this 395 * transfer is in progress are enabled. 396 * 397 * @param regs Programming view of DWC_otg controller 398 * @param hc Information needed to initialize the host channel 399 */ 400 static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num, 401 uint8_t dev_addr, uint8_t ep_num, uint8_t ep_is_in, 402 uint8_t ep_type, uint16_t max_packet) 403 { 404 struct dwc2_hc_regs *hc_regs = ®s->hc_regs[hc_num]; 405 const uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) | 406 (ep_num << DWC2_HCCHAR_EPNUM_OFFSET) | 407 (ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) | 408 (ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) | 409 (max_packet << DWC2_HCCHAR_MPS_OFFSET); 410 411 /* Clear old interrupt conditions for this host channel. */ 412 writel(0x3fff, &hc_regs->hcint); 413 414 /* 415 * Program the HCCHARn register with the endpoint characteristics 416 * for the current transfer. 417 */ 418 writel(hcchar, &hc_regs->hcchar); 419 420 /* Program the HCSPLIT register for SPLITs */ 421 writel(0, &hc_regs->hcsplt); 422 } 423 424 /* 425 * DWC2 to USB API interface 426 */ 427 /* Direction: In ; Request: Status */ 428 static int dwc_otg_submit_rh_msg_in_status(struct usb_device *dev, void *buffer, 429 int txlen, struct devrequest *cmd) 430 { 431 uint32_t hprt0 = 0; 432 uint32_t port_status = 0; 433 uint32_t port_change = 0; 434 int len = 0; 435 int stat = 0; 436 437 switch (cmd->requesttype & ~USB_DIR_IN) { 438 case 0: 439 *(uint16_t *)buffer = cpu_to_le16(1); 440 len = 2; 441 break; 442 case USB_RECIP_INTERFACE: 443 case USB_RECIP_ENDPOINT: 444 *(uint16_t *)buffer = cpu_to_le16(0); 445 len = 2; 446 break; 447 case USB_TYPE_CLASS: 448 *(uint32_t *)buffer = cpu_to_le32(0); 449 len = 4; 450 break; 451 case USB_RECIP_OTHER | USB_TYPE_CLASS: 452 hprt0 = readl(®s->hprt0); 453 if (hprt0 & DWC2_HPRT0_PRTCONNSTS) 454 port_status |= USB_PORT_STAT_CONNECTION; 455 if (hprt0 & DWC2_HPRT0_PRTENA) 456 port_status |= USB_PORT_STAT_ENABLE; 457 if (hprt0 & DWC2_HPRT0_PRTSUSP) 458 port_status |= USB_PORT_STAT_SUSPEND; 459 if (hprt0 & DWC2_HPRT0_PRTOVRCURRACT) 460 port_status |= USB_PORT_STAT_OVERCURRENT; 461 if (hprt0 & DWC2_HPRT0_PRTRST) 462 port_status |= USB_PORT_STAT_RESET; 463 if (hprt0 & DWC2_HPRT0_PRTPWR) 464 port_status |= USB_PORT_STAT_POWER; 465 466 port_status |= USB_PORT_STAT_HIGH_SPEED; 467 468 if (hprt0 & DWC2_HPRT0_PRTENCHNG) 469 port_change |= USB_PORT_STAT_C_ENABLE; 470 if (hprt0 & DWC2_HPRT0_PRTCONNDET) 471 port_change |= USB_PORT_STAT_C_CONNECTION; 472 if (hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG) 473 port_change |= USB_PORT_STAT_C_OVERCURRENT; 474 475 *(uint32_t *)buffer = cpu_to_le32(port_status | 476 (port_change << 16)); 477 len = 4; 478 break; 479 default: 480 puts("unsupported root hub command\n"); 481 stat = USB_ST_STALLED; 482 } 483 484 dev->act_len = min(len, txlen); 485 dev->status = stat; 486 487 return stat; 488 } 489 490 /* Direction: In ; Request: Descriptor */ 491 static int dwc_otg_submit_rh_msg_in_descriptor(struct usb_device *dev, 492 void *buffer, int txlen, 493 struct devrequest *cmd) 494 { 495 unsigned char data[32]; 496 uint32_t dsc; 497 int len = 0; 498 int stat = 0; 499 uint16_t wValue = cpu_to_le16(cmd->value); 500 uint16_t wLength = cpu_to_le16(cmd->length); 501 502 switch (cmd->requesttype & ~USB_DIR_IN) { 503 case 0: 504 switch (wValue & 0xff00) { 505 case 0x0100: /* device descriptor */ 506 len = min3(txlen, (int)sizeof(root_hub_dev_des), (int)wLength); 507 memcpy(buffer, root_hub_dev_des, len); 508 break; 509 case 0x0200: /* configuration descriptor */ 510 len = min3(txlen, (int)sizeof(root_hub_config_des), (int)wLength); 511 memcpy(buffer, root_hub_config_des, len); 512 break; 513 case 0x0300: /* string descriptors */ 514 switch (wValue & 0xff) { 515 case 0x00: 516 len = min3(txlen, (int)sizeof(root_hub_str_index0), 517 (int)wLength); 518 memcpy(buffer, root_hub_str_index0, len); 519 break; 520 case 0x01: 521 len = min3(txlen, (int)sizeof(root_hub_str_index1), 522 (int)wLength); 523 memcpy(buffer, root_hub_str_index1, len); 524 break; 525 } 526 break; 527 default: 528 stat = USB_ST_STALLED; 529 } 530 break; 531 532 case USB_TYPE_CLASS: 533 /* Root port config, set 1 port and nothing else. */ 534 dsc = 0x00000001; 535 536 data[0] = 9; /* min length; */ 537 data[1] = 0x29; 538 data[2] = dsc & RH_A_NDP; 539 data[3] = 0; 540 if (dsc & RH_A_PSM) 541 data[3] |= 0x1; 542 if (dsc & RH_A_NOCP) 543 data[3] |= 0x10; 544 else if (dsc & RH_A_OCPM) 545 data[3] |= 0x8; 546 547 /* corresponds to data[4-7] */ 548 data[5] = (dsc & RH_A_POTPGT) >> 24; 549 data[7] = dsc & RH_B_DR; 550 if (data[2] < 7) { 551 data[8] = 0xff; 552 } else { 553 data[0] += 2; 554 data[8] = (dsc & RH_B_DR) >> 8; 555 data[9] = 0xff; 556 data[10] = data[9]; 557 } 558 559 len = min3(txlen, (int)data[0], (int)wLength); 560 memcpy(buffer, data, len); 561 break; 562 default: 563 puts("unsupported root hub command\n"); 564 stat = USB_ST_STALLED; 565 } 566 567 dev->act_len = min(len, txlen); 568 dev->status = stat; 569 570 return stat; 571 } 572 573 /* Direction: In ; Request: Configuration */ 574 static int dwc_otg_submit_rh_msg_in_configuration(struct usb_device *dev, 575 void *buffer, int txlen, 576 struct devrequest *cmd) 577 { 578 int len = 0; 579 int stat = 0; 580 581 switch (cmd->requesttype & ~USB_DIR_IN) { 582 case 0: 583 *(uint8_t *)buffer = 0x01; 584 len = 1; 585 break; 586 default: 587 puts("unsupported root hub command\n"); 588 stat = USB_ST_STALLED; 589 } 590 591 dev->act_len = min(len, txlen); 592 dev->status = stat; 593 594 return stat; 595 } 596 597 /* Direction: In */ 598 static int dwc_otg_submit_rh_msg_in(struct usb_device *dev, 599 void *buffer, int txlen, 600 struct devrequest *cmd) 601 { 602 switch (cmd->request) { 603 case USB_REQ_GET_STATUS: 604 return dwc_otg_submit_rh_msg_in_status(dev, buffer, 605 txlen, cmd); 606 case USB_REQ_GET_DESCRIPTOR: 607 return dwc_otg_submit_rh_msg_in_descriptor(dev, buffer, 608 txlen, cmd); 609 case USB_REQ_GET_CONFIGURATION: 610 return dwc_otg_submit_rh_msg_in_configuration(dev, buffer, 611 txlen, cmd); 612 default: 613 puts("unsupported root hub command\n"); 614 return USB_ST_STALLED; 615 } 616 } 617 618 /* Direction: Out */ 619 static int dwc_otg_submit_rh_msg_out(struct usb_device *dev, 620 void *buffer, int txlen, 621 struct devrequest *cmd) 622 { 623 int len = 0; 624 int stat = 0; 625 uint16_t bmrtype_breq = cmd->requesttype | (cmd->request << 8); 626 uint16_t wValue = cpu_to_le16(cmd->value); 627 628 switch (bmrtype_breq & ~USB_DIR_IN) { 629 case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_ENDPOINT: 630 case (USB_REQ_CLEAR_FEATURE << 8) | USB_TYPE_CLASS: 631 break; 632 633 case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS: 634 switch (wValue) { 635 case USB_PORT_FEAT_C_CONNECTION: 636 setbits_le32(®s->hprt0, DWC2_HPRT0_PRTCONNDET); 637 break; 638 } 639 break; 640 641 case (USB_REQ_SET_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS: 642 switch (wValue) { 643 case USB_PORT_FEAT_SUSPEND: 644 break; 645 646 case USB_PORT_FEAT_RESET: 647 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 648 DWC2_HPRT0_PRTCONNDET | 649 DWC2_HPRT0_PRTENCHNG | 650 DWC2_HPRT0_PRTOVRCURRCHNG, 651 DWC2_HPRT0_PRTRST); 652 mdelay(50); 653 clrbits_le32(®s->hprt0, DWC2_HPRT0_PRTRST); 654 break; 655 656 case USB_PORT_FEAT_POWER: 657 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 658 DWC2_HPRT0_PRTCONNDET | 659 DWC2_HPRT0_PRTENCHNG | 660 DWC2_HPRT0_PRTOVRCURRCHNG, 661 DWC2_HPRT0_PRTRST); 662 break; 663 664 case USB_PORT_FEAT_ENABLE: 665 break; 666 } 667 break; 668 case (USB_REQ_SET_ADDRESS << 8): 669 root_hub_devnum = wValue; 670 break; 671 case (USB_REQ_SET_CONFIGURATION << 8): 672 break; 673 default: 674 puts("unsupported root hub command\n"); 675 stat = USB_ST_STALLED; 676 } 677 678 len = min(len, txlen); 679 680 dev->act_len = len; 681 dev->status = stat; 682 683 return stat; 684 } 685 686 static int dwc_otg_submit_rh_msg(struct usb_device *dev, unsigned long pipe, 687 void *buffer, int txlen, 688 struct devrequest *cmd) 689 { 690 int stat = 0; 691 692 if (usb_pipeint(pipe)) { 693 puts("Root-Hub submit IRQ: NOT implemented\n"); 694 return 0; 695 } 696 697 if (cmd->requesttype & USB_DIR_IN) 698 stat = dwc_otg_submit_rh_msg_in(dev, buffer, txlen, cmd); 699 else 700 stat = dwc_otg_submit_rh_msg_out(dev, buffer, txlen, cmd); 701 702 mdelay(1); 703 704 return stat; 705 } 706 707 /* U-Boot USB transmission interface */ 708 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 709 int len) 710 { 711 int devnum = usb_pipedevice(pipe); 712 int ep = usb_pipeendpoint(pipe); 713 int max = usb_maxpacket(dev, pipe); 714 int done = 0; 715 uint32_t hctsiz, sub, tmp; 716 struct dwc2_hc_regs *hc_regs = ®s->hc_regs[DWC2_HC_CHANNEL]; 717 uint32_t hcint; 718 uint32_t xfer_len; 719 uint32_t num_packets; 720 int stop_transfer = 0; 721 unsigned int timeout = 1000000; 722 723 if (devnum == root_hub_devnum) { 724 dev->status = 0; 725 return -EINVAL; 726 } 727 728 if (len > DWC2_DATA_BUF_SIZE) { 729 printf("%s: %d is more then available buffer size (%d)\n", 730 __func__, len, DWC2_DATA_BUF_SIZE); 731 dev->status = 0; 732 dev->act_len = 0; 733 return -EINVAL; 734 } 735 736 while ((done < len) && !stop_transfer) { 737 /* Initialize channel */ 738 dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, 739 usb_pipein(pipe), DWC2_HCCHAR_EPTYPE_BULK, max); 740 741 xfer_len = len - done; 742 /* Make sure that xfer_len is a multiple of max packet size. */ 743 if (xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE) 744 xfer_len = CONFIG_DWC2_MAX_TRANSFER_SIZE - max + 1; 745 746 if (xfer_len > 0) { 747 num_packets = (xfer_len + max - 1) / max; 748 if (num_packets > CONFIG_DWC2_MAX_PACKET_COUNT) { 749 num_packets = CONFIG_DWC2_MAX_PACKET_COUNT; 750 xfer_len = num_packets * max; 751 } 752 } else { 753 num_packets = 1; 754 } 755 756 if (usb_pipein(pipe)) 757 xfer_len = num_packets * max; 758 759 writel((xfer_len << DWC2_HCTSIZ_XFERSIZE_OFFSET) | 760 (num_packets << DWC2_HCTSIZ_PKTCNT_OFFSET) | 761 (bulk_data_toggle[devnum][ep] << 762 DWC2_HCTSIZ_PID_OFFSET), 763 &hc_regs->hctsiz); 764 765 memcpy(aligned_buffer, (char *)buffer + done, len - done); 766 writel((uint32_t)aligned_buffer, &hc_regs->hcdma); 767 768 /* Set host channel enable after all other setup is complete. */ 769 clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK | 770 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS, 771 (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | 772 DWC2_HCCHAR_CHEN); 773 774 while (1) { 775 hcint = readl(&hc_regs->hcint); 776 777 if (!(hcint & DWC2_HCINT_CHHLTD)) 778 continue; 779 780 if (hcint & DWC2_HCINT_XFERCOMP) { 781 hctsiz = readl(&hc_regs->hctsiz); 782 done += xfer_len; 783 784 sub = hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK; 785 sub >>= DWC2_HCTSIZ_XFERSIZE_OFFSET; 786 787 if (usb_pipein(pipe)) { 788 done -= sub; 789 if (hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK) 790 stop_transfer = 1; 791 } 792 793 tmp = hctsiz & DWC2_HCTSIZ_PID_MASK; 794 tmp >>= DWC2_HCTSIZ_PID_OFFSET; 795 if (tmp == DWC2_HC_PID_DATA1) { 796 bulk_data_toggle[devnum][ep] = 797 DWC2_HC_PID_DATA1; 798 } else { 799 bulk_data_toggle[devnum][ep] = 800 DWC2_HC_PID_DATA0; 801 } 802 break; 803 } 804 805 if (hcint & DWC2_HCINT_STALL) { 806 puts("DWC OTG: Channel halted\n"); 807 bulk_data_toggle[devnum][ep] = 808 DWC2_HC_PID_DATA0; 809 810 stop_transfer = 1; 811 break; 812 } 813 814 if (!--timeout) { 815 printf("%s: Timeout!\n", __func__); 816 break; 817 } 818 } 819 } 820 821 if (done && usb_pipein(pipe)) 822 memcpy(buffer, aligned_buffer, done); 823 824 writel(0, &hc_regs->hcintmsk); 825 writel(0xFFFFFFFF, &hc_regs->hcint); 826 827 dev->status = 0; 828 dev->act_len = done; 829 830 return 0; 831 } 832 833 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 834 int len, struct devrequest *setup) 835 { 836 struct dwc2_hc_regs *hc_regs = ®s->hc_regs[DWC2_HC_CHANNEL]; 837 int done = 0; 838 int devnum = usb_pipedevice(pipe); 839 int ep = usb_pipeendpoint(pipe); 840 int max = usb_maxpacket(dev, pipe); 841 uint32_t hctsiz = 0, sub, tmp, ret; 842 uint32_t hcint; 843 const uint32_t hcint_comp_hlt_ack = DWC2_HCINT_XFERCOMP | 844 DWC2_HCINT_CHHLTD | DWC2_HCINT_ACK; 845 unsigned int timeout = 1000000; 846 847 /* For CONTROL endpoint pid should start with DATA1 */ 848 int status_direction; 849 850 if (devnum == root_hub_devnum) { 851 dev->status = 0; 852 dev->speed = USB_SPEED_HIGH; 853 return dwc_otg_submit_rh_msg(dev, pipe, buffer, len, setup); 854 } 855 856 if (len > DWC2_DATA_BUF_SIZE) { 857 printf("%s: %d is more then available buffer size(%d)\n", 858 __func__, len, DWC2_DATA_BUF_SIZE); 859 dev->status = 0; 860 dev->act_len = 0; 861 return -EINVAL; 862 } 863 864 /* Initialize channel, OUT for setup buffer */ 865 dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, 0, 866 DWC2_HCCHAR_EPTYPE_CONTROL, max); 867 868 /* SETUP stage */ 869 writel((8 << DWC2_HCTSIZ_XFERSIZE_OFFSET) | 870 (1 << DWC2_HCTSIZ_PKTCNT_OFFSET) | 871 (DWC2_HC_PID_SETUP << DWC2_HCTSIZ_PID_OFFSET), 872 &hc_regs->hctsiz); 873 874 writel((uint32_t)setup, &hc_regs->hcdma); 875 876 /* Set host channel enable after all other setup is complete. */ 877 clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK | 878 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS, 879 (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | DWC2_HCCHAR_CHEN); 880 881 ret = wait_for_bit(&hc_regs->hcint, DWC2_HCINT_CHHLTD, 1); 882 if (ret) 883 printf("%s: Timeout!\n", __func__); 884 885 hcint = readl(&hc_regs->hcint); 886 887 if (!(hcint & DWC2_HCINT_CHHLTD) || !(hcint & DWC2_HCINT_XFERCOMP)) { 888 printf("%s: Error (HCINT=%08x)\n", __func__, hcint); 889 dev->status = 0; 890 dev->act_len = 0; 891 return -EINVAL; 892 } 893 894 /* Clear interrupts */ 895 writel(0, &hc_regs->hcintmsk); 896 writel(0xFFFFFFFF, &hc_regs->hcint); 897 898 if (buffer) { 899 /* DATA stage */ 900 dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, 901 usb_pipein(pipe), 902 DWC2_HCCHAR_EPTYPE_CONTROL, max); 903 904 /* TODO: check if len < 64 */ 905 control_data_toggle[devnum][ep] = DWC2_HC_PID_DATA1; 906 writel((len << DWC2_HCTSIZ_XFERSIZE_OFFSET) | 907 (1 << DWC2_HCTSIZ_PKTCNT_OFFSET) | 908 (control_data_toggle[devnum][ep] << 909 DWC2_HCTSIZ_PID_OFFSET), 910 &hc_regs->hctsiz); 911 912 writel((uint32_t)buffer, &hc_regs->hcdma); 913 914 /* Set host channel enable after all other setup is complete */ 915 clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK | 916 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS, 917 (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | 918 DWC2_HCCHAR_CHEN); 919 920 while (1) { 921 hcint = readl(&hc_regs->hcint); 922 if (!(hcint & DWC2_HCINT_CHHLTD)) 923 continue; 924 925 if (hcint & DWC2_HCINT_XFERCOMP) { 926 hctsiz = readl(&hc_regs->hctsiz); 927 done = len; 928 929 sub = hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK; 930 sub >>= DWC2_HCTSIZ_XFERSIZE_OFFSET; 931 932 if (usb_pipein(pipe)) 933 done -= sub; 934 } 935 936 if (hcint & DWC2_HCINT_ACK) { 937 tmp = hctsiz & DWC2_HCTSIZ_PID_MASK; 938 tmp >>= DWC2_HCTSIZ_PID_OFFSET; 939 if (tmp == DWC2_HC_PID_DATA0) { 940 control_data_toggle[devnum][ep] = 941 DWC2_HC_PID_DATA0; 942 } else { 943 control_data_toggle[devnum][ep] = 944 DWC2_HC_PID_DATA1; 945 } 946 } 947 948 if (hcint != hcint_comp_hlt_ack) { 949 printf("%s: Error (HCINT=%08x)\n", 950 __func__, hcint); 951 goto out; 952 } 953 954 if (!--timeout) { 955 printf("%s: Timeout!\n", __func__); 956 goto out; 957 } 958 959 break; 960 } 961 } /* End of DATA stage */ 962 963 /* STATUS stage */ 964 if ((len == 0) || usb_pipeout(pipe)) 965 status_direction = 1; 966 else 967 status_direction = 0; 968 969 dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, 970 status_direction, DWC2_HCCHAR_EPTYPE_CONTROL, max); 971 972 writel((1 << DWC2_HCTSIZ_PKTCNT_OFFSET) | 973 (DWC2_HC_PID_DATA1 << DWC2_HCTSIZ_PID_OFFSET), 974 &hc_regs->hctsiz); 975 976 writel((uint32_t)status_buffer, &hc_regs->hcdma); 977 978 /* Set host channel enable after all other setup is complete. */ 979 clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK | 980 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS, 981 (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | DWC2_HCCHAR_CHEN); 982 983 while (1) { 984 hcint = readl(&hc_regs->hcint); 985 if (hcint & DWC2_HCINT_CHHLTD) 986 break; 987 } 988 989 if (hcint != hcint_comp_hlt_ack) 990 printf("%s: Error (HCINT=%08x)\n", __func__, hcint); 991 992 out: 993 dev->act_len = done; 994 dev->status = 0; 995 996 return done; 997 } 998 999 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1000 int len, int interval) 1001 { 1002 printf("dev = %p pipe = %#lx buf = %p size = %d int = %d\n", 1003 dev, pipe, buffer, len, interval); 1004 return -ENOSYS; 1005 } 1006 1007 /* U-Boot USB control interface */ 1008 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) 1009 { 1010 uint32_t snpsid; 1011 int i, j; 1012 1013 root_hub_devnum = 0; 1014 1015 snpsid = readl(®s->gsnpsid); 1016 printf("Core Release: %x.%03x\n", snpsid >> 12 & 0xf, snpsid & 0xfff); 1017 1018 if ((snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_2xx) { 1019 printf("SNPSID invalid (not DWC2 OTG device): %08x\n", snpsid); 1020 return -ENODEV; 1021 } 1022 1023 dwc_otg_core_init(regs); 1024 dwc_otg_core_host_init(regs); 1025 1026 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 1027 DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG | 1028 DWC2_HPRT0_PRTOVRCURRCHNG, 1029 DWC2_HPRT0_PRTRST); 1030 mdelay(50); 1031 clrbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET | 1032 DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG | 1033 DWC2_HPRT0_PRTRST); 1034 1035 for (i = 0; i < MAX_DEVICE; i++) { 1036 for (j = 0; j < MAX_ENDPOINT; j++) { 1037 control_data_toggle[i][j] = DWC2_HC_PID_DATA1; 1038 bulk_data_toggle[i][j] = DWC2_HC_PID_DATA0; 1039 } 1040 } 1041 1042 return 0; 1043 } 1044 1045 int usb_lowlevel_stop(int index) 1046 { 1047 /* Put everything in reset. */ 1048 clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | 1049 DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG | 1050 DWC2_HPRT0_PRTOVRCURRCHNG, 1051 DWC2_HPRT0_PRTRST); 1052 return 0; 1053 } 1054