1# 2# USB Host Controller Drivers 3# 4comment "USB Host Controller Drivers" 5 6config USB_HOST 7 bool 8 9config USB_XHCI_HCD 10 bool "xHCI HCD (USB 3.0) support" 11 select USB_HOST 12 ---help--- 13 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 14 "SuperSpeed" host controller hardware. 15 16if USB_XHCI_HCD 17 18config USB_XHCI_DWC3 19 bool "DesignWare USB3 DRD Core Support" 20 help 21 Say Y or if your system has a Dual Role SuperSpeed 22 USB controller based on the DesignWare USB3 IP Core. 23 24config USB_XHCI_MVEBU 25 bool "MVEBU USB 3.0 support" 26 default y 27 depends on ARCH_MVEBU 28 select DM_REGULATOR 29 help 30 Choose this option to add support for USB 3.0 driver on mvebu 31 SoCs, which includes Armada8K, Armada3700 and other Armada 32 family SoCs. 33 34config USB_XHCI_PCI 35 bool "Support for PCI-based xHCI USB controller" 36 depends on DM_USB 37 default y if X86 38 help 39 Enables support for the PCI-based xHCI controller. 40 41config USB_XHCI_ROCKCHIP 42 bool "Support for Rockchip on-chip xHCI USB controller" 43 depends on ARCH_ROCKCHIP 44 depends on DM_REGULATOR 45 depends on DM_USB 46 default y 47 help 48 Enables support for the on-chip xHCI controller on Rockchip SoCs. 49 50config USB_XHCI_RCAR 51 bool "Renesas RCar USB 3.0 support" 52 default y 53 depends on ARCH_RMOBILE 54 help 55 Choose this option to add support for USB 3.0 driver on Renesas 56 RCar Gen3 SoCs. 57 58config USB_XHCI_STI 59 bool "Support for STMicroelectronics STiH407 family on-chip xHCI USB controller" 60 depends on ARCH_STI 61 default y 62 help 63 Enables support for the on-chip xHCI controller on STMicroelectronics 64 STiH407 family SoCs. This is a driver for the dwc3 to provide the glue logic 65 to configure the controller. 66 67config USB_XHCI_ZYNQMP 68 bool "Support for Xilinx ZynqMP on-chip xHCI USB controller" 69 depends on ARCH_ZYNQMP 70 help 71 Enables support for the on-chip xHCI controller on Xilinx ZynqMP SoCs. 72 73config USB_XHCI_DRA7XX_INDEX 74 int "DRA7XX xHCI USB index" 75 range 0 1 76 default 0 77 depends on DRA7XX 78 help 79 Select the DRA7XX xHCI USB index. 80 Current supported values: 0, 1. 81 82config USB_XHCI_FSL 83 bool "Support for NXP Layerscape on-chip xHCI USB controller" 84 default y if ARCH_LS1021A || FSL_LSCH3 || FSL_LSCH2 85 depends on !SPL_NO_USB 86 help 87 Enables support for the on-chip xHCI controller on NXP Layerscape SoCs. 88endif # USB_XHCI_HCD 89 90config USB_EHCI_HCD 91 bool "EHCI HCD (USB 2.0) support" 92 default y if ARCH_MX5 || ARCH_MX6 93 select USB_HOST 94 ---help--- 95 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 96 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. 97 If your USB host controller supports USB 2.0, you will likely want to 98 configure this Host Controller Driver. 99 100 EHCI controllers are packaged with "companion" host controllers (OHCI 101 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports 102 will connect to EHCI if the device is high speed, otherwise they 103 connect to a companion controller. If you configure EHCI, you should 104 probably configure the OHCI (for NEC and some other vendors) USB Host 105 Controller Driver or UHCI (for Via motherboards) Host Controller 106 Driver too. 107 108 You may want to read <file:Documentation/usb/ehci.txt>. 109 110if USB_EHCI_HCD 111 112config USB_EHCI_ATMEL 113 bool "Support for Atmel on-chip EHCI USB controller" 114 depends on ARCH_AT91 115 default y 116 ---help--- 117 Enables support for the on-chip EHCI controller on Atmel chips. 118 119config USB_EHCI_MARVELL 120 bool "Support for Marvell on-chip EHCI USB controller" 121 depends on ARCH_MVEBU || KIRKWOOD || ORION5X 122 default y 123 ---help--- 124 Enables support for the on-chip EHCI controller on MVEBU SoCs. 125 126config USB_EHCI_MX6 127 bool "Support for i.MX6 on-chip EHCI USB controller" 128 depends on ARCH_MX6 129 default y 130 ---help--- 131 Enables support for the on-chip EHCI controller on i.MX6 SoCs. 132 133config USB_EHCI_MX7 134 bool "Support for i.MX7 on-chip EHCI USB controller" 135 depends on ARCH_MX7 136 default y 137 ---help--- 138 Enables support for the on-chip EHCI controller on i.MX7 SoCs. 139 140config USB_EHCI_OMAP 141 bool "Support for OMAP3+ on-chip EHCI USB controller" 142 depends on ARCH_OMAP2PLUS 143 default y 144 ---help--- 145 Enables support for the on-chip EHCI controller on OMAP3 and later 146 SoCs. 147 148if USB_EHCI_MX7 149 150config MXC_USB_OTG_HACTIVE 151 bool "USB Power pin high active" 152 ---help--- 153 Set the USB Power pin polarity to be high active (PWR_POL) 154 155endif 156 157config USB_EHCI_MSM 158 bool "Support for Qualcomm on-chip EHCI USB controller" 159 depends on DM_USB 160 select USB_ULPI_VIEWPORT 161 default n 162 ---help--- 163 Enables support for the on-chip EHCI controller on Qualcomm 164 Snapdragon SoCs. 165 This driver supports combination of Chipidea USB controller 166 and Synapsys USB PHY in host mode only. 167 168config USB_EHCI_PCI 169 bool "Support for PCI-based EHCI USB controller" 170 default y if X86 171 help 172 Enables support for the PCI-based EHCI controller. 173 174config USB_EHCI_ZYNQ 175 bool "Support for Xilinx Zynq on-chip EHCI USB controller" 176 depends on ARCH_ZYNQ 177 default y 178 ---help--- 179 Enable support for Zynq on-chip EHCI USB controller 180 181config USB_EHCI_GENERIC 182 bool "Support for generic EHCI USB controller" 183 depends on OF_CONTROL 184 depends on DM_USB 185 default n 186 ---help--- 187 Enables support for generic EHCI controller. 188 189config USB_EHCI_FSL 190 bool "Support for FSL on-chip EHCI USB controller" 191 default n 192 select CONFIG_EHCI_HCD_INIT_AFTER_RESET 193 ---help--- 194 Enables support for the on-chip EHCI controller on FSL chips. 195endif # USB_EHCI_HCD 196 197config USB_OHCI_HCD 198 bool "OHCI HCD (USB 1.1) support" 199 ---help--- 200 The Open Host Controller Interface (OHCI) is a standard for accessing 201 USB 1.1 host controller hardware. It does more in hardware than Intel's 202 UHCI specification. If your USB host controller follows the OHCI spec, 203 say Y. On most non-x86 systems, and on x86 hardware that's not using a 204 USB controller from Intel or VIA, this is appropriate. If your host 205 controller doesn't use PCI, this is probably appropriate. For a PCI 206 based system where you're not sure, the "lspci -v" entry will list the 207 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI. 208 209if USB_OHCI_HCD 210 211config USB_OHCI_GENERIC 212 bool "Support for generic OHCI USB controller" 213 depends on OF_CONTROL 214 depends on DM_USB 215 select USB_HOST 216 ---help--- 217 Enables support for generic OHCI controller. 218 219endif # USB_OHCI_HCD 220 221config USB_UHCI_HCD 222 bool "UHCI HCD (most Intel and VIA) support" 223 select USB_HOST 224 ---help--- 225 The Universal Host Controller Interface is a standard by Intel for 226 accessing the USB hardware in the PC (which is also called the USB 227 host controller). If your USB host controller conforms to this 228 standard, you may want to say Y, but see below. All recent boards 229 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX, 230 i810, i820) conform to this standard. Also all VIA PCI chipsets 231 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro 232 133) and LEON/GRLIB SoCs with the GRUSBHC controller. 233 If unsure, say Y. 234 235if USB_UHCI_HCD 236 237endif # USB_UHCI_HCD 238 239config USB_DWC2 240 bool "DesignWare USB2 Core support" 241 select USB_HOST 242 ---help--- 243 The DesignWare USB 2.0 controller is compliant with the 244 USB-Implementers Forum (USB-IF) USB 2.0 specifications. 245 Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) 246 operation is compliant to the controller Supplement. If you want to 247 enable this controller in host mode, say Y. 248