xref: /openbmc/u-boot/drivers/usb/gadget/usbstring.c (revision bdef7876)
1 /*
2  * Copyright (C) 2003 David Brownell
3  *
4  * SPDX-License-Identifier:	LGPL-2.1+
5  *
6  * Ported to U-Boot by: Thomas Smits <ts.smits@gmail.com> and
7  *                      Remy Bohmer <linux@bohmer.net>
8  */
9 
10 #include <common.h>
11 #include <linux/errno.h>
12 #include <linux/usb/ch9.h>
13 #include <linux/usb/gadget.h>
14 
15 #include <asm/unaligned.h>
16 
17 
18 static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
19 {
20 	int	count = 0;
21 	u8	c;
22 	u16	uchar;
23 
24 	/*
25 	 * this insists on correct encodings, though not minimal ones.
26 	 * BUT it currently rejects legit 4-byte UTF-8 code points,
27 	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
28 	 */
29 	while (len != 0 && (c = (u8) *s++) != 0) {
30 		if ((c & 0x80)) {
31 			/*
32 			 * 2-byte sequence:
33 			 * 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
34 			 */
35 			if ((c & 0xe0) == 0xc0) {
36 				uchar = (c & 0x1f) << 6;
37 
38 				c = (u8) *s++;
39 				if ((c & 0xc0) != 0x80)
40 					goto fail;
41 				c &= 0x3f;
42 				uchar |= c;
43 
44 			/*
45 			 * 3-byte sequence (most CJKV characters):
46 			 * zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
47 			 */
48 			} else if ((c & 0xf0) == 0xe0) {
49 				uchar = (c & 0x0f) << 12;
50 
51 				c = (u8) *s++;
52 				if ((c & 0xc0) != 0x80)
53 					goto fail;
54 				c &= 0x3f;
55 				uchar |= c << 6;
56 
57 				c = (u8) *s++;
58 				if ((c & 0xc0) != 0x80)
59 					goto fail;
60 				c &= 0x3f;
61 				uchar |= c;
62 
63 				/* no bogus surrogates */
64 				if (0xd800 <= uchar && uchar <= 0xdfff)
65 					goto fail;
66 
67 			/*
68 			 * 4-byte sequence (surrogate pairs, currently rare):
69 			 * 11101110wwwwzzzzyy + 110111yyyyxxxxxx
70 			 *     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
71 			 * (uuuuu = wwww + 1)
72 			 * FIXME accept the surrogate code points (only)
73 			 */
74 			} else
75 				goto fail;
76 		} else
77 			uchar = c;
78 		put_unaligned_le16(uchar, cp++);
79 		count++;
80 		len--;
81 	}
82 	return count;
83 fail:
84 	return -1;
85 }
86 
87 
88 /**
89  * usb_gadget_get_string - fill out a string descriptor
90  * @table: of c strings encoded using UTF-8
91  * @id: string id, from low byte of wValue in get string descriptor
92  * @buf: at least 256 bytes
93  *
94  * Finds the UTF-8 string matching the ID, and converts it into a
95  * string descriptor in utf16-le.
96  * Returns length of descriptor (always even) or negative errno
97  *
98  * If your driver needs stings in multiple languages, you'll probably
99  * "switch (wIndex) { ... }"  in your ep0 string descriptor logic,
100  * using this routine after choosing which set of UTF-8 strings to use.
101  * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
102  * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
103  * characters (which are also widely used in C strings).
104  */
105 int
106 usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf)
107 {
108 	struct usb_string	*s;
109 	int			len;
110 
111 	if (!table)
112 		return -EINVAL;
113 
114 	/* descriptor 0 has the language id */
115 	if (id == 0) {
116 		buf[0] = 4;
117 		buf[1] = USB_DT_STRING;
118 		buf[2] = (u8) table->language;
119 		buf[3] = (u8) (table->language >> 8);
120 		return 4;
121 	}
122 	for (s = table->strings; s && s->s; s++)
123 		if (s->id == id)
124 			break;
125 
126 	/* unrecognized: stall. */
127 	if (!s || !s->s)
128 		return -EINVAL;
129 
130 	/* string descriptors have length, tag, then UTF16-LE text */
131 	len = min((size_t) 126, strlen(s->s));
132 	memset(buf + 2, 0, 2 * len);	/* zero all the bytes */
133 	len = utf8_to_utf16le(s->s, (__le16 *)&buf[2], len);
134 	if (len < 0)
135 		return -EINVAL;
136 	buf[0] = (len + 1) * 2;
137 	buf[1] = USB_DT_STRING;
138 	return buf[0];
139 }
140