xref: /openbmc/u-boot/drivers/usb/eth/usb_ether.c (revision a2bc4321)
1 /*
2  * Copyright (c) 2011 The Chromium OS Authors.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <usb.h>
9 
10 #include "usb_ether.h"
11 
12 typedef void (*usb_eth_before_probe)(void);
13 typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum,
14 			struct ueth_data *ss);
15 typedef int (*usb_eth_get_info)(struct usb_device *dev, struct ueth_data *ss,
16 			struct eth_device *dev_desc);
17 
18 struct usb_eth_prob_dev {
19 	usb_eth_before_probe	before_probe; /* optional */
20 	usb_eth_probe			probe;
21 	usb_eth_get_info		get_info;
22 };
23 
24 /* driver functions go here, each bracketed by #ifdef CONFIG_USB_ETHER_xxx */
25 static const struct usb_eth_prob_dev prob_dev[] = {
26 #ifdef CONFIG_USB_ETHER_ASIX
27 	{
28 		.before_probe = asix_eth_before_probe,
29 		.probe = asix_eth_probe,
30 		.get_info = asix_eth_get_info,
31 	},
32 #endif
33 #ifdef CONFIG_USB_ETHER_ASIX88179
34 	{
35 		.before_probe = ax88179_eth_before_probe,
36 		.probe = ax88179_eth_probe,
37 		.get_info = ax88179_eth_get_info,
38 	},
39 #endif
40 #ifdef CONFIG_USB_ETHER_MCS7830
41 	{
42 		.before_probe = mcs7830_eth_before_probe,
43 		.probe = mcs7830_eth_probe,
44 		.get_info = mcs7830_eth_get_info,
45 	},
46 #endif
47 #ifdef CONFIG_USB_ETHER_SMSC95XX
48 	{
49 		.before_probe = smsc95xx_eth_before_probe,
50 		.probe = smsc95xx_eth_probe,
51 		.get_info = smsc95xx_eth_get_info,
52 	},
53 #endif
54 	{ },		/* END */
55 };
56 
57 static int usb_max_eth_dev; /* number of highest available usb eth device */
58 static struct ueth_data usb_eth[USB_MAX_ETH_DEV];
59 
60 /*******************************************************************************
61  * tell if current ethernet device is a usb dongle
62  */
63 int is_eth_dev_on_usb_host(void)
64 {
65 	int i;
66 	struct eth_device *dev = eth_get_dev();
67 
68 	if (dev) {
69 		for (i = 0; i < usb_max_eth_dev; i++)
70 			if (&usb_eth[i].eth_dev == dev)
71 				return 1;
72 	}
73 	return 0;
74 }
75 
76 /*
77  * Given a USB device, ask each driver if it can support it, and attach it
78  * to the first driver that says 'yes'
79  */
80 static void probe_valid_drivers(struct usb_device *dev)
81 {
82 	struct eth_device *eth;
83 	int j;
84 
85 	for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) {
86 		if (!prob_dev[j].probe(dev, 0, &usb_eth[usb_max_eth_dev]))
87 			continue;
88 		/*
89 		 * ok, it is a supported eth device. Get info and fill it in
90 		 */
91 		eth = &usb_eth[usb_max_eth_dev].eth_dev;
92 		if (prob_dev[j].get_info(dev,
93 			&usb_eth[usb_max_eth_dev],
94 			eth)) {
95 			/* found proper driver */
96 			/* register with networking stack */
97 			usb_max_eth_dev++;
98 
99 			/*
100 			 * usb_max_eth_dev must be incremented prior to this
101 			 * call since eth_current_changed (internally called)
102 			 * relies on it
103 			 */
104 			eth_register(eth);
105 			if (eth_write_hwaddr(eth, "usbeth",
106 					usb_max_eth_dev - 1))
107 				puts("Warning: failed to set MAC address\n");
108 			break;
109 			}
110 		}
111 	}
112 
113 /*******************************************************************************
114  * scan the usb and reports device info
115  * to the user if mode = 1
116  * returns current device or -1 if no
117  */
118 int usb_host_eth_scan(int mode)
119 {
120 	int i, old_async;
121 	struct usb_device *dev;
122 
123 
124 	if (mode == 1)
125 		printf("       scanning usb for ethernet devices... ");
126 
127 	old_async = usb_disable_asynch(1); /* asynch transfer not allowed */
128 
129 	/* unregister a previously detected device */
130 	for (i = 0; i < usb_max_eth_dev; i++)
131 		eth_unregister(&usb_eth[i].eth_dev);
132 
133 	memset(usb_eth, 0, sizeof(usb_eth));
134 
135 	for (i = 0; prob_dev[i].probe; i++) {
136 		if (prob_dev[i].before_probe)
137 			prob_dev[i].before_probe();
138 	}
139 
140 	usb_max_eth_dev = 0;
141 	for (i = 0; i < USB_MAX_DEVICE; i++) {
142 		dev = usb_get_dev_index(i); /* get device */
143 		debug("i=%d\n", i);
144 		if (dev == NULL)
145 			break; /* no more devices available */
146 
147 		/* find valid usb_ether driver for this device, if any */
148 		probe_valid_drivers(dev);
149 
150 		/* check limit */
151 		if (usb_max_eth_dev == USB_MAX_ETH_DEV) {
152 			printf("max USB Ethernet Device reached: %d stopping\n",
153 				usb_max_eth_dev);
154 			break;
155 		}
156 	} /* for */
157 
158 	usb_disable_asynch(old_async); /* restore asynch value */
159 	printf("%d Ethernet Device(s) found\n", usb_max_eth_dev);
160 	if (usb_max_eth_dev > 0)
161 		return 0;
162 	return -1;
163 }
164